SQL type not recognized: 'double unsigned'

I have a particular table that uses fields defined as "double
unsinged". Every time I expand that table in the database area, I
get the error "SQL type not recognized: 'double unsigned'".
Is this a bug or is it some odd configuration error on my
part?

Hi there
See
this
thread on configuring sql types

Similar Messages

Sql type not recognized: 'int unsigned' when I expand table in Dreamweaver

Dreamweaver warning message - "sql type not recognized: 'int
unsigned'"
This was happening in Dreamweaver MX and now in CS3. The
pages using these tables are not throwing errors when I test them,
but each time I expand a table in Dreamweaver, I get these warning
messages. Often I get the same message multiple times and must
click OK each time before I can proceed. Just now I had to OK the
warning three times for a table that only has one integer field and
two fields total.
Any help would be greatly appreciated.
Thanks

Hi Bagger and Ken
With some help from Randy Edmunds at Adobe was able to find a
solution to this bug.
*note I am still using DW MX 2004 so there may be some
variation with your version.
ANSWER: You need to add the sql type "int unsigned" to the
dwscriptsServer.js in Dreamweaver's files.
The file to ammend is [your path to the DW
root]\Configuration\Shared\Common\Scripts\
dwscriptsServer.js
do a search for the alert: "MM.MSG_SQLTypeAsNumNotInMap" and
then go up from there (it is about line 2059 in the DW MX 2004
file).
underneath a["unsignedint"] = 19;
add a new line a["int unsigned"] = 19; // variation of
unsigned int
I then deleted the delete the FileCache.dat (from step #4
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19105)
and restarted DW.
That should fix it!
If that doesn't work then search the DW folders for
"MM.MSG_SQLTypeAsNumNotInMap" and ammend the sql data types where
the functions raise the error alert.
I hope this is helpful!
Cheers
Martin
ps I would be using the CS3 web premium suite if it wasn't
for the fact that the UK upgrade price is (£539) - >US$1000
which is more then double what US customers pay. (OK my whinge
over, boo hoo)

Token Type not recognized???

I've been trying to send out a newsletter in PDF format, however I've been getting a few responses back from people viewing it on a PC saying they can't see it and the error message "Token type not recognized" is being returned.
Any suggestions?

Also, I have looked at other posts and it was recommended to print a copy as a PostScript file and then convert it to PDF in preview but this doesn't work either.

SQL 2012 not recognizing modification of scalar function

I have two scalar functions which are both very similar. Both required three variables. Then I realized that I needed another variable in both functions so I added it to both. I then modified the call to each function (e.g. select dbo.function(var1,
var2, var3, var4)), but within Management Studio editor, only the change in the first function is recognized. Below is the function that is not recognized and the call to it. The error is 'insufficient number of arguments'. Its as if Management
Studio doesn't realize I made the change.
ALTER FUNCTION [dbo].[InvoicePaidLateInFull](@Invoice bigint, @DueDate datetime, @Total decimal(14, 4), @EndDate datetime)
RETURNS bit
AS
BEGIN
DECLARE @PaidLate bit, @Paydate datetime, @Amount decimal(14, 4)
declare @Check int, @CurrentStatus bigint
declare @AmtTol decimal(14,4), @CID bigint
Set @PaidLate = 0
Set @CurrentStatus = (Select top 1 StatusID from RebateData Where InvoiceNo = @Invoice order by ID)
if @CurrentStatus <> 1
Begin
Goto NotDueYet
End
Set @CID = (Select top 1 CID from RebateData Where InvoiceNo = @Invoice order by ID)
Set @AmtTol = (Select AmountTolerance from MasterCustomerProgramContracts where ID = @CID)
If datediff(dd, @DueDate, @EndDate) < 0
Begin
GoTo NotDueYet
End
Set @Check = (Select count(*) from Payments Where InvoiceNo = @Invoice)
if @Check = 0
Begin
--No payments have been received at all. Consider as 'Unpaid'
GoTo NotDueYet
End
Set @Amount = isnull((Select round(sum(Amount) , 2)
from Payments
where invoiceno = @Invoice
and PayDate <= @DueDate
Group by InvoiceNo), 0)
Set @Amount = -(@Amount)
If @Amount between (@Total - (@Total * @AmtTol)) and (@Total + (@Total * @AmtTol))
Begin
Set @PaidLate = 0
End
If @Amount < (@Total - (@Total * @AmtTol))
Begin
Set @PaidLate = 1
End
NotDueYet:
RETURN @PaidLate
END
The Call:
Set @PL = (Select dbo.InvoicePaidLateInFull(@Inv, @DueDate, @Total, @EndDate))
Seems like I read the other day of a script that can be run to 'update' SQL, but I can't remember it now.
Thanks.
Ross

Leaving the Intellisense issue, permit me to point out that incorrectly used, this function can be a performance killer. An occasional call - no problem. But if you do something like:
SELECT ..., dbo.InvoicePaidLateInFull(invoice_id, due_date) AS PaidLade
FROM MillionRowTable
This is a performance disaster. SQL Server cannot optimize the function, so you will have a cursor in disguise.
Overall, you should be very restrictive with scalar functions that perfoms data access.
Erland Sommarskog, SQL Server MVP, [email protected]

LiveType .ipr won't import into FCP - File type not recognized

LiveType file is greyed out when trying to import into FCP as a Standard File type. If we change Standard File to All Files we get an error stating, "File Error: 1 file recognized, 0 access denied, 1 unknown."
The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager.
We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.
Is it time for a reinstall of FCP Suite?
G4 Tower 1.42 Ghz Mac OS X (10.4.7)
G4 PowerBook 667 Mac OS X (10.3.7)
G4 PowerBook 1.67 Mac OS X (10.4.7)
G5 2.5Ghz Mac OS X (10.4.7)
iMac G5 1.8Ghz Mac OS X (10.4.7)

The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager. We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.< </div>
This is usually two things: In compatible versions of FCP or a missing element that allows the .ipr files to be imported. I have forgotten what the enabler is but it's obviously working on your G5 or you wouldn't be asking the question. If you create a LT file on your G4, can you import it into FCP on the G$?
(You can search the forum for similar problems, it comes up about twice a month.)
That leaves the problem of incompatible copies of FCP. You have not provided that information. FCP is not backwards compatible.
bogiesan

Png type not recognized in widget - how to edit file type?

Dear all,
I almost got crazy these last hours as a nice widget I am working on suddenly refused to work.
I now understand the source of the problem: the file type of the PNG background image is not "Portable Network Graphics Image" but "Adobe Photoshop PNG".
This causes the widget to refuse to load, apparently.
I can not find a way to edit this (even FileInfo does not propose PNG?)... or to make photoshop produce a generic PNG.
Has anybody encountered this problem and/or has an idea on how to solve it?
I can not imagine that there is no way in mac os x to edit the inner properties of the file..
THANKS for any hint,
Olivier.

Hi
I think there's a similar issue in Fireworks, where the native file format appears to be an extended form of PNG. In Fireworks, there's a file export command, which enables you to create a separate copy of the file in PNG (or any other) format whilst retaining the extended PNG for the master version of the file. I'm not a Photoshop user but I would look to see if there's an "export" command, and I would use it to create a separate PNG version of the file, in the hope that this does not have any of the extensions.
Bob

Help, xsl mime type not recognized by ie 5.5

Hey, I've got a page that is doing it's own xml/xsl transforms in javascript. It uses XMLDocument.load( file location), which fails in IE 5.5. I think I've narrowed the problem down to this: If I enter the URL directly to the xsl:
http://(myhost):8889/oe/test.xsl it works fine in ie 6 but fails in 5.5 (I get a "cannot download from xxx" message).
I've tried adding the MIME mapping to the web.xml file and insured that the mime.properties file had an entry for xsl... any ideas?

ssprengel wrote:
What is different is that ACR 8.5 includes a slight functional improvement of being able to edit spotting tool areas that LR doesn't have or at least not documented to have, though I'm not convinced this isn't due to enhancement schedules slipping due to the LR team having too much on their plate and an Cloud announcement event that was scheduled months in advance so couldn't slip, though it could be that we're seeing functional improvements in CC 2014's ACR that we'll have to wait for LR6 for.
ACR in CS6 is done in terms of any new functionality, how long camera support continues is questionable. PS CC 2014 continue to get new features. So this alone is a new behavior. While ACR and the DNG converter have and I suspect will continue to be released at the same time, that's not necessarily going to happen with LR which is kind of an odd beast now that we have both CC subscription and perpetual licensing. Currently, ACR has features that LR doesn't. More improvements for ACR are coming and whether they will be released before or at the same time as LR is unknown outside Adobe. Pretty darn sure you will not see functionality in ACR that LR also shares coming out after an LR release but anything is possible. To sweeten subscription, it seems illogical for LR to have a newer feature prior to ACR release. But again, this is all new territory.
Getting back OT, the release of ACR and LR that can support the new Nikon will happen, but when? Could be weeks, could be months. Until then, the OP has no options other than using the Nikon raw converter (or shooting JPEG which as I pointed out is never an issue like these damn proprietary raw files).

LogProviders.Add fails with "not recognized as a valid log provider type." in Data Tools but not BIDS

In attempting to add standard DTS logging to a package via Data Tools, I found that my attempt to execute:
Dim provider As LogProvider = p.LogProviders.Add("DTS.LogProviderTextFile.2")
(or any other log provider type,) resulted in:
The log provider type "DTS.LogProviderTextFile.2, {0A039101-ACC1-4E06-943F-279948323883}" specified for log provider "{CC5CB9A4-E0D5-4ECD-8F4E-1E8FB9BDE8A6}" is not recognized as a valid log provider type. This error occurs when an
attempt is made to create a log provider for unknown log provider type. Verify the spelling in the log provider type name.
I created a new package with a single script task using only the example code from the MS documentation for Embedding Logging Programmatically at:
http://msdn.microsoft.com/en-us/library/ms136023(v=sql.110).aspx
consisting of:
Imports Microsoft.SqlServer.Dts.Runtime
Module Module1
Sub Main()
Dim p As Package = New Package()
Dim loggingConnection As ConnectionManager = p.Connections.Add("FILE")
loggingConnection.ConnectionString = "C:\SSISPackageLog.txt"
Dim provider As LogProvider = p.LogProviders.Add("DTS.LogProviderTextFile.2")
provider.ConfigString = loggingConnection.Name
p.LoggingOptions.SelectedLogProviders.Add(provider)
p.LoggingOptions.EventFilterKind = DTSEventFilterKind.Inclusion
p.LoggingOptions.EventFilter = New String() {"OnPreExecute", _
"OnPostExecute", "OnError", "OnWarning", "OnInformation"}
p.LoggingMode = DTSLoggingMode.Enabled
' Add tasks and other objects to the package.
End Sub
End Module
I get the same error as listed above in SQL Server 2012 Data Tools on three separate machines. On my primary dev box, where the code fails in Data Tools, running the exact same code in BIDS runs without problems.
Importing the working BIDS package into Data Tools also fails with the same error.
I have not encountered any other 2012 Data Tools issues, but logging is a core pattern that makes me worry that this is a problem that may emerge with other functions in the DTS toolset.
Thanks for any help!!

Arthur,
Great idea, I verified that the Integration Services for 2012 was not installed. I installed the new SSIS service and verified that SQL Server Integration Services 11.0 was running (previously only 10.0 was running.)
Initially, I experienced an error message trying to run my simple script above:
Could not load file or assembly 'Microsoft.VisualStudio.Tools.Applications.Core, Version=10.0.0.0,...
I followed the steps at the MS link for Could not load file or assembly ‘Microsoft.VisualStudio.Tools.Applications.Core’
and loaded the missing x64 runtime from edist/VSTA/runtime/x64/VSTA_RT30.msi
on the distribution media as recomended.
The script ran, but returned the error listed in the beginning of this message. I then tried:
- turning off the 10.0 service
- setting the project's Run64BitRunTime value both false and true
- changing the reference to Microsoft.SqlServer.ManagedDTS.dll from C:\Program Files (x86)\Microsoft SQL Server\110\SDK\Assemblies to C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ManagedDTS\v4.0_11.0.0.0__89845dcd8080cc91
all of these resulted in the same failure.
Thank you for the suggestion, I really thought it would be on target. Alas, it wasn't the fix.
It is so weird that all the other stuff I'm doing (a very elaborate programmatic package generator doing some tricky stuff,) works fine and only this super basic logging fails!!!!
Thanks again,
--Tim

Term is not recognized when executing PowerShell Script through SQL Agent using CMDEXEC

I am trying to simply execute a PowerShell script that is stored in a file on a network drive through SQL Agent as a job. The script is a basic copy from one directory to another. I have run and successfully executed this from a command prompt outside
of SQL Agent. When I execute this through SQL Agent as a Operating System (CmdExec) command I am getting an error that the term is not recognized as the name of a cmdleet, function, script file or operable program. I have executed many different ways
put found an article to use double quotes in the network path which I have done with no success.
I am executing the following command as a job in SQL Agent:
PowerShell H:\"\PowerShell""\PS_Scripts\"\batchcopyFFLWithProgress.ps1 through SQL Agent job
I get the following error message:
04/21/2015 10:01:09,Copy FFL Files,Error,1,NY11266-LTW7E\JPLAPTOPSQL,Copy FFL Files,Copy FFL files,,Executed as user: NT Service\SQLAgent$JPLAPTOPSQL. H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1 : The term 'H:\PowerShell\PS_Scripts\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again.
At line:1 char:1 + H:"\PowerShell\PS_Scripts"\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound:
(H:\PowerShell\P...ithProgress.p s1:String) []<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:03,0,0,,,,0
Content of batchcopyFFLWithProgress.ps1 which has the PowerShell script:
$source=ls H:\SQLTest\Script\TestData\*.*
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination H:\test -Recurse
$i++
I have searched the internet and have not found any resolution to my error. If someone has experienced this error and found the resolution I would greatly appreciate your help.

I have change the service account for SQL Agent to be my domain account as I have local admin rights to my laptop. I stopped and started the services for SQL Agent and than started the job to run which is copying locally to minimize any network drive
issues. I am still getting the same error message as it is showing that I am executing the job under my domain account? Any thoughts what it could be?
ErrorMsg
04/23/2015 11:21:06,Copy FFL Files,Error,1,ServerName\InstanceName,Copy FFL Files,Copy FFL files,,Executed as user: Domain\DomainAccount. \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 : The term '\\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1'
is not recognized as the name of a cmdlet<c/> function<c/> script file<c/> or operable program. Check the spelling of the name<c/> or if a path was included<c/> verify that the path is correct and try again. At
line:1 char:1 + \\ServerName\Test\PS_Script\batchcopyFFLWithProgress.ps1 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (\\ServerName...ithProgress.ps1:String)
[]<c/> CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException. Process Exit Code 1. The step failed.,00:00:02,0,0,,,,0
Script
$source=ls "\\ServerName\Test\TestData\*.*"
$i=1
$source| %{
[int]$percent = $i / $source.count * 100
Write-Progress -Activity "Copying ... ($percent %)" -status $_ -PercentComplete $percent -verbose
copy $_.fullName -Destination "\\ServerName\Test\test" -Recurse
$i++

I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it!

I recently spilled liquid on my computer, but it is up and running, it loads and brings me to the safe boot screen where I need to type my password, but It is not recognizing it, help! How do I get passed it or fix it! I have tried holding the apple key and "s" and then type in the code to reset the password, but my keyboard is not letting me use the numbers or any keys that are accessed by holding shift! Please help me get passed this screen

Fluids and electronics do not mix.
You have caused some serious damage to parts of your computer, and likely voided the warranty until Apple completes a repair and re-certifies it.
Step one is to turn it off and do NOT (did I say do NOT yet?) turn it on again yourself.
Take it to an Apple store and be prepared for a large repair bill.
Sorry, but that is the truth.

BPM 10g: configuration name [ ProjectName ] and type [SQL] is not defined.

Hi There,
I try to help a colleague with his BPM10g project. When I start the engine in BPM Studio with his project I eventually get this error in a popup:
"The configuration name [<ProjectName>] and type [SQL] is not defined.
Detail: The connector must be configured in the appropriate context."
I upgraded from 10.3.1 to 10.3.2, but did not help. Still my own project and another svn-branch of his project do work.
Anybody any ideas on where to look?
Thanks in advance.
Regards,
Martien

I found out that the folder must be the same as in the project file.

When I type .ssh root@10.0.02 it says host not recognized I'm unable to get in to known host file can not fix the problem.

When I open terminal and do sash [email protected] it says warning rsa key not recognized to go to known-hosts file which ican not grt into I have download pico but am not sure how to launch it or what I ave to do.

sibeen, please stop starting new posts when you are really just continuing the first post. "Reply" to one of your existing posts when you are really just continuing the same question. If I have not lost count, you have posted 3 times about this same ssh rsa host key issue, and Linc Davis and I have been trying to keep track of all the details, but with it spread out across multiple new posts, it is difficult.
I'm guessing as you again forgot to post the actual error (I'm starting to wonder if you are testing how well Linc and I can guess at your problem ). Anyway, I'm guessing that you managed to delete the $HOME/.ssh/known_hosts file, and now when you try to ssh to 10.0.0.2 it wants to add the remote system's host rsa key into a newly created known_hosts file.
The authenticity of host '[10.0.0.2]:22([10.0.0.2]:22)' can't be established.
RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
Are you sure you want to continue connecting (yes/no)?
Generally the command ask if you want to do this, yes or no. You type "yes" and your Mac memorizes the remote system's host rsa key.
If this is not the warning message you are seeing, then as Linc has requested, please post the exact error (feel free to mask put the actual key or usernames or IP addresses, but keep the words.
If you are still getting the original error from 3 posts ago, then I would not try editing $HOME/.ssh/known_hosts, and instead just delete the file, and when you get a message like I have posted above, answer it with "yes".
WIth respect to pico, Mac OS X already has pico installed, so there was no need to download it from anywhere. However, most people just use 'nano' which has essentially replaced 'pico' as an easy to use Terminal based text editor. But like I said, I think you will be happier if you just delete the known_hosts file and get on with your ssh operations.
Finally, I think in your 2nd post you indicated you tried deleting a file that had a dash in the name (known-hosts) instead of an underscore (known_hosts). If that was just a typo when you entered your post, and you were really getting you cannot delete a directory, then something is seriously wrong, or you accidentally allowed a space to be inserted between .ssh and known_hosts. Personally, I'm going with you actually entered a space and the 'rm' command thought you wanted to delete the .ssh directory instead of $HOME/.ssh/known_hosts. I could be wrong, but using copy and paste to post actual Terminal screen output as well as the command you entered would be very helpful to anyone trying to provide useful information. In other words, help us help you.

PLS-00642: local collection types not allowed in SQL statements

Hi,
I want to retrieve empno in plsql table.
Now based on the empno in plsql table I want to retrieve thier deptno in another plsql table/varray.
SQL> declare
2   type vdeptno is table of number;
3    v_deptno vdeptno;
4    TYPE e_tab is table of PLS_INTEGER INDEX BY PLS_INTEGER;
5    empno_tab e_tab;
6   Begin
7 Select empno bulk collect into empno_tab FROM emp;
8 FOR i in empno_tab.FIRST..empno_tab.LAST
9 LOOP
10   dbms_output.put_line(empno_tab(i));
11   Select deptno into v_deptno
12   FROM emp
13    where empno=empno_tab(i);
14   END loop;
15 END;
16 /
Select deptno into v_deptno
ERROR at line 11:
ORA-06550: line 11, column 21:
PLS-00642: local collection types not allowed in SQL statementsAny other way to do the same.
Twinkle

When you use this method ...
type vdeptno is table of number;
v_deptno vdeptno;
You need to allocate space to the object prior to inserting into it , (use .EXTENDS for this). Or you need to initialize it while declaring it.
or try the following
SQL> declare
2 type vdeptno is table of number;
3 v_deptno vdeptno;
4 TYPE e_tab is table of PLS_INTEGER INDEX BY PLS_INTEGER;
5 empno_tab e_tab;
6 Begin
7 Select empno bulk collect into empno_tab FROM emp;
8 FOR i in empno_tab.FIRST..empno_tab.LAST
9 LOOP
10 dbms_output.put_line(empno_tab(i));
11 Select deptno bulk collect into v_deptno
12 FROM emp
13 where empno=empno_tab(i);
14 END loop;
15 END;
16 /
Edited by: user9276238 on Jun 14, 2010 3:26 AM

In the URL bar, type about:config Type geo.enabled Double click on the geo.enabled preference Location-Aware Browsing is now disabled, does not work How do you turn this Off!

In the URL bar, type about:config
Type geo.enabled
Double click on the geo.enabled preference
Location-Aware Browsing is now disabled
Google will not remove their location aware feature saying it is picked up by the location aware feature in my firefox browser and referred me to your like where I found the above to disable this feature. It just sent me to a yahoo search page. How do you disable this I want to use US Google not Google.ua and you don't need this to help me locate anything in the Ukraine. When I take my laptop with me on trips does my firefox local change wherever I go?

See:
* http://www.mozilla.com/firefox/geolocation/
*http://browserspy.dk/geolocation.php

SQL Svr 2012 / SharePoint 2013 "Install-SPRSService is not recognized..."

Greetings --
I'm having a heck of a time trying to get Reporting Services integrated with SharePoint 2013. The end result is that no matter what I try, I keep getting the "The term 'Install-SPRSService' is not recognized as the name of a cmdlet" error
which thereby prevents me from finalizing the integration with SP 2013.
Following is a description of my lab + the steps I've followed to try to resolve:
In a virtual environment with 3 machines, I have one set as the Domain Controller, one with SQL Server 2012 installed (no reporting services), one with SharePoint Server 2013.
The domain is working fine... no problems there. SQL Server 2012 is working fine... I can connect to it locally and remotely, execute commands, etc.
On the SharePoint 2013 machine, I have tried two ways... 1) install SharePoint 2013 first, then install SQL Server requirements... 2) install SQL Server requirements first, then SharePoint 2013.
In both methods, I am installing both "Reporting Services - SharePoint" and "Reporting Services Add-in for SharePoint Products" on the same machine as SharePoint Server 2013.
My understanding was that when SP is installed first, the SQL Server installation should auto-register the necessary components (meaning running Install-SPRSService and ServiceProxy are not required). However, in this scenario, this doesn't appear to
have happened. The service does not appear at all within SharePoint. Attempting to run "Install-SPRSService" fails with the "not recognized" error.
In the second scenario (Installing SQL Server components first, then SharePoint second), it is my understanding that the "Install-SPRSService and Install-SPRSServiceProxy" must be run manually. With both SQL Server components and SharePoint 2013
successfully installed, running "Install-SPRSService" fails with the "not recognized" error.
I would also like to point out that I am executing the Install command from the "SharePoint 2013 Mangement Shell" (right clicking and running as Administrator).
Any suggestions or nuggets-of-wisdom would be GREATLY appreciated!

Hi,
I had the same issue when installing SSRS in SharePoint integrated mode. I had SharePoint management Shell opened, installed SQL binaries and then tried to run command Install-SPRSService
and Install-SPRSServiceProxy. I got the same errors.
But then I thought, if assemblies for SharePoint are loaded when Management Shell is opened, the assemblies were not
there when I opened PowerShell. So I just closed Management Shell, opened it again and everything worked as expected.
Hope it helps
Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
Slovenia
Please vote if you find reply useful or mark it as answer.
Thank you

SQL type not recognized: 'double unsigned'

Similar Messages

Maybe you are looking for