SQLDeveloper 1.5.1 (Build MAIN-5440) does not correctly export data.
At export of the data the script of the data insert is incorrectly generated. For example at export from "Tools"-->"Database Export" menu it generates following script:
Insert into "DIC_StructBlockType" (ID,"Name","Code") values ('[B@124e231' 'Center' '1');
instead of
Insert into "DIC_StructBlockType" (ID,"Name","Code") values ('30100000000111000000000000000100', 'Center', '1');
(where ID is RAW(16) or GUID)
I.e. wrong conversion of RAW(16) format and absence of commas in values section taking place
At export from data view of table i have
Insert into "DIC_StructBlockType" (ID,"Name","Code") values ('30100000000111000000000000000100' 'Center' '1');
without commas in values section instead of script above.
I know than in SQLDeveloper 1.5.0.52 (Build MAIN-52.03) insert script generation from table data view works normally (but not works in Database Export tool).
Whether there is a patch for this bug (in 1.5.1)?
The first issue seems like a previously unreported bug.
The second bug is because the values are (wrongfully) separated by the Preferences - Database - NLS Settings - Group Separator. Just change that to comma, and the Decimal Separator to something else.
Regards,
K.
Similar Messages
-
Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.
Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.
Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO: are not in the correct allignment. Also there are numbers on each of the dialogues
Pretty much alot of the formatting is not the same. Spaces that break dialouge and action which are there in Story, are not converted over to Final Draft.
Please fix this as soon as possible.
thanks,
Rohit -
We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Premiere CS4 Does Not Correctly Export Quicktime
Hello,
When CS4 initially came out, all of the Quicktime exports were messed up. Now after several patches it still seems that it is not completely correct. I have rendered out of a 3d app sequential images with a white background and an alpha channel. When I import these into Premiere, when the alpha channel is disabled for the clip, it correctly shows a white background in the monitor. But when I export this clip to Quicktime Animation and turn on 32 bit depth, it creates the clip with an alpha channel, but when the alpha channel is disabled on the clip, it renders the background still as black, but with no alpha. It should render it as white. Quicktime Animation clips created this way with other Quicktime exporting software does not do this, and so I believe this is a bug. Where can this be logged?
thxIt's not a problem with Quicktime, but rather Premiere CS4 because other apps can create the same thing correctly, using the Quicktime Animation codec.
thx -
SQL Developer Version 1.5.1 Build MAIN-5440 Imported Connections missing
I have a problem using SQL Developer Version 1.5.1 Build MAIN-5440. I have successfully imported connections from my previous version of SQL Developer. After I restart, all the connections I have imported has been gone. I tried to import the connections but got an error message:
java.lang.NullPointerException
at oracle.jdeveloper.db.DatabaseConnections.getReferenceable(DatabaseConnections.java:695)
at oracle.jdeveloper.db.DatabaseConnections.addConnection(DatabaseConnections.java:762)
at oracle.dbtools.raptor.connections.ConnectionGrinder.doImportExport(ConnectionGrinder.java:243)
at oracle.dbtools.raptor.connections.ConnectionGrinder.invoke(ConnectionGrinder.java:117)
at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.handleEvent(DatabaseNavigatorController.java:200)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I tried to create a new connections. I can test the newly created connections but cannot save it.This bug was fixed in SqlDev 2.1.1. You'll find this build on our homepage.
-Raghu -
The main menu does not show in explorer/PC!!
I have a problem that i hope somebody can solve. When i am publishing my site from iWeb directly to me.com the website is working fine. If i export the website and then preview it in explorer on PC the main menu does not appear for some reason. I would be greatful if somebody could give me an explination on what is wrong? Please!
Where are you "exporting" your site to?
The iWeb navigation menu will not show on a PC running IE if Java is turned off.
You can get round this by "hiding" the standard navigation using the "page" inspector and building your own.
See...
http://iwebfaq.org/site/iWebNavigationmenu.html -
My main menu does not appear when I turn on my apple TV first generation, how do I restore my main menu screen?
When I turn on, it asks for language choice, then it asks for 1080i, then it asks for network choices. I choose my network, then it asks for my network password. I enter the password, then it say it does not connect to network, and if I hit menu on remote, it goes back to network selection. I can not get to main menu to see my setting for the network, because there is no menu.
-
Freight Charges does not correctly show Tax % / calaculate
Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
FranzProblem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz -
Managed System Configuration ! The table does not contain any data !
Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
ThanksHi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali -
I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments -
"BP Category 1 does not fit the data in category 2" "Replies Appreciated"
Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
RohanHi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven -
CRM 2007 IC : error "BP category 2 does not fit the data in category 1"
Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
SandyHi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar -
Error: 'BP category 1 does not fit the data in category 2'
Hi,
i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
REC(1000) TYPE C,
END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
ADDRESS TYPE BAPIBUS1006_ADDRESS,
BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = UP_FILE
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
WRITE:/ ITAB-REC.
CLEAR IDAT.
SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
IDAT-FLD2 TO ADDRESS-STREET,
IDAT-FLD3 TO ADDRESS-CITY,
IDAT-FLD4 TO ADDRESS-REGION,
IDAT-FLD5 TO ADDRESS-POSTL_COD1,
IDAT-FLD6 TO ADDRESS-COUNTRY,
IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
'0001' TO CENTRALDATA-PARTNERTYPE.
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
EXPORTING
PARTNERCATEGORY = '1'
CENTRALDATA = CENTRALDATA
CENTRALDATAORGANIZATION = ORGANIZATION
ADDRESSDATA = ADDRESS
IMPORTING
BUSINESSPARTNER = BUSINESSPARTNER
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
REFRESH BAPIRETURN.
CLEAR BAPIRETURN.
CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
EXPORTING
BUSINESSPARTNER = BUSINESSPARTNER
BUSINESSPARTNERROLE = 'BUP001'
DIFFERENTIATIONTYPEVALUE =
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.Hi Pushpa,
you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
EXPORTING
BUSINESSPARTNER = SEARCH_PARTNER
CONTACTPERSON = CONTACT_SAP
VALIDFROMDATE = '00010101'
VALIDUNTILDATE = '99991231'
DEFAULTRELATIONSHIP =
ADDRESSGUID =
CENTRALDATA = WA_CENTRAL_DATA
ADDRESSDATA = WA_ADDR_DATA
TABLES
BAPIADTEL = I_TEL_DATA
BAPIADFAX = I_FAX_DATA
BAPIADTTX =
BAPIADTLX =
BAPIADSMTP = I_EMAIL_DATA
BAPIADRML =
BAPIADX400 =
BAPIADRFC =
BAPIADPRT =
BAPIADSSF =
BAPIADURI =
BAPIADPAG =
BAPIAD_REM =
BAPICOMREM =
RETURN = I_RETURN
hope this will help you
Siva -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
DataGrid does not display XML data
Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.
Maybe you are looking for
-
Net value is zero in proforma invoice.
26.11.2010 Hi friends, I am trying to create a proforma invoice against delivery. But on the screen against the items i see the Net value against each item and the over all net value as 0. But in the condition tab for each item the values are existi
-
Is DW CS4 Mac super buggy?
Or do I need to reinstall it or something? Sometimes I can click on the css rule and click 'edit' and a window will come up. Other times it won't. Some times Live View will work sometimes not. And so on and so on. Are there a slew of existing bugs wi
-
Dear all, Is there a BADI available for ME27? The scenario is such that the client wants to make the POu2019s through ME27 only and not through ME21N We have used the BADI ME_PROCESS_PO_CUST and put the code in PROCESS_ITEM and getting the required
-
New computer, new Ipod. How can I get my purchases back?
I have an Ipod. I deleted all my music off it. I bought a new computer. I've logged back into Itunes but it hasn't got any of my purchases recorded. I had bought quite a lot of music, how can I get it back? I know it'd be easy to re-authorise if i ha
-
Hi Is there anyone who can able to provide script to query the item_id on a specific Code for example: Item Code 301425PDEP1XT? Thanks