SQLPlus: Spool is wrapping lines at 80 chars when linesize = 1000

I have following code and the result wrap off at 80 . Please suggest ways to avoid it. Thanks
set define on
set echo off
set pages 10000
set heading off
set lines 1000
set long 10000
set heading on
set feedback off
set heading off
set verify off
set trimspool on
set linesize 1000
set wrap off
spool c:\spooltext5.xml;
SELECT NYTD_XML_DATA FROM NYTD_DATA_TEMP;
spool off
exit;

Used Column formating and solved the issue
column NYTD_XML_DATA new_value NYTD_XML_DATA format a1000;
spool c:\spooltext5.xml;
SELECT NYTD_XML_DATA FROM NYTD_DATA_TEMP;
spool off
Thanks

Similar Messages

Spool List output display 255 char when the rpt is run in Background

Hi Friends,
I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
My Problem:
1. The spool list is truncated after 255 characters when i run in background.
2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
3. I ve not used any Standard - line size for dislaying ..
4. In foreground i am able to display all the 64 columns... Y not in Background......
5. My Printer setting is ..X_255 .... only ...
Requirement:
1. What should i do to increase the spool list display to more than 255 characters
2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
Expecting your answers,
Thanks in Advance...
Cheers,
R.Kripa .........
Enjoy ABAPing ..........
new upcoming Abaper ....

Hello Kripa,
You need to perform two actions.
1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
When you give your report in background, do not forget to choose the new format you created.
2. After the spool request is created, you take its number and use it ar a parameter in the following report.
Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
It should work then.
roxani
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with line size more than 255 characters in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlange berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.
CHECK REST_LEN > 0.
ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.
IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.
IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.
IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.
ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.
FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS .
DATA: CHUNK TYPE I.
WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.
FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM.

DBMS_Metadata package wrapping lines

How can you set the line size for the DDL that is generated from the DBMS_MetaData pkg? If I try to run the script that is generated by this output, I get errors because things are wrapped.
I used this sql to generate my ddl:
select dbms_metadata.get_ddl('TABLE','EMP') FROM DUAL;
Anybody have a good idea on how to get this output to work properly?
Thanks,
Jim

Setting LONG does not help wrapping lines, use LINESIZE and COLUMN FORMAT.
I am using this script:
PROMPT exporting &1. &2..&3.
--##&1=OBJECT_TYPE &2=OWNER &3=OBJECT_NAME
set echo off
set linesize 1000
set long 65536
set trimspool on
set null null
set head off
set pagesize 0
set newpage none
set headsep off
set feedback off
set ver off
set pause off
set flush off
column aaa format a1000
EXECUTE DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',true);
spool &Your_package.sql
select dbms_metadata.get_ddl('PACKAGE', '&Your_package', '&OWNER') aaa from dual
spool off

Why are spaces missing at end of wrapped lines in bulleted lists

Hi -
Acrobat 11.0.10, Word 2013, Windows 7 ... Sometimes tagged PDFs don't have spaces at the end of wrapping lines in bulleted lists, throughout the document. In text edit mode the cursor movement indicates no space exists. Selecting with text touch-up shows no space. In accessible text the last word on line runs into first word on next line. JAWS mis-pronounces those words as if they are one word. PAC preview also shows the words running together.
Adding a space in text edit mode works for a few minutes, but when file is saved & reopened spaces are gone, even if, immediately after adding the spaces, I select the block of LBody text with text touch-up and re-tag it and initially spaces appear to have been added.
Is starting to happen on a routine basis, different source files, different people/computers generating the PDFs, multiple computer reboots, Acrobat repair run, MS Office repair run. But not consistent ... e.g., if someone generated PDF with no spaces at end, someone else can generate from same source and spaces are present.
Any ideas?
Thanks

Thanks 'C' student, nice to know it's not just us - "misery loves company" and all that.
So far besides your reply there's deafening silence.
Come on, folks, don't any of you experts have a solution for this? Or at least an inkling of an idea what may be causing this? It's starting to happen all the time now, becoming a major problem. We may have to start by getting Acrobat to self-tag rather than starting with the tags generated from the source programs, but that adds time and effort because Acrobat's tags for our often complex documents are laughable and have, ironically, such poor syntax.
Is there a way to get a discussion seen by more people?

How to wrap lines in JTable before printing

Can somebody explane me how to wrap lines in a JTable.
I mean, when a line is to large for printing in JTable, the cell of
that line has to been elarged, but only that cell, not hole the table.
Can somebody give me a good tutorial of example code?
Tnx
Twims

I guess you will have to implement the cellRenderer extending the JTextArea instead of JTextField, and then set the .setLineWrap(true).
Bruno

(SQLPlus) SPOOL

(SQLPlus) SPOOL
HI,
can anyone help me on this? i want to create a csv file that will have a certain filename coming from a variable from a query. the ff codes does not work :( any help pls! THANKS in advance
BROKEN
select customer_name into v_name from demo_customers where cust_id = 1;
SPOOL ..\data\order_&v_name&.csv
SELECT
order_id || ',' ||
order_total || ',' ||
order_datetime
FROM
demo_orders
WHERE
customer_id =1;
SPOOL OFF;
exit;
------------------------------------------------------------------------------------------------------------------

to a bind variable yes, in plsql. To a "define" variable no.
SQL> var n number
SQL> set autopri on
SQL> exec select 1+1 into :n from dual;
PL/SQL procedure successfully completed.
N
2

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1" When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application". I checked and there is nothing under the "purchases" in my App store. Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store. Please try again". Just want to know how do to fix.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

Report Title Displaying in Multiple Lines on PDF Format when i Print in PDF

Report Title Displaying in Multiple Lines on PDF Format when i tried to print in PDF Format, is there any limit for Report Title Characters
Displaying Like -
LRDP
Open
Label
Paradigm
Forecast
Report
Any Info Appreciated
~Srix

Got It .. Just need to chnage the Width Parameter.......!

Acrobat X: Option to hide the dotted line in between pages when viewing in 2 page view?

Acrobat X: Anyone know if there is an option to hide the dotted line in between pages when viewing in 2 page view? So that the 2 pages can look seemlessly joined, with no gap and no dotted line? This would be useful when viewing PDF magazines or books in which 2 pages join for a larger picture.

Create a Page 0 item which will be available on all pages.OMG yes I can use items in page 0 ! I should have think of that :/ Shame on me.
Application item values can be set from JavaScript using AJAX and an On-Demand Process.Yes I already tried ajax with ODP, my getappitem() function works but my setappitem() function won't assign value to application item, but it's not a problem now, I removed the ajax part and I will use page items :D
Thank you fac586.
Yann.

What does the little circle with a line in it mean when in edit mode? how can I get rid of it?

What does a little circle with a line in it mean when I am trying to edit? how do I get rid of it?

robynlwitheridge
What version of Premiere Elements are you using and on what computer operating system is it running?
From your description "little circle with a line in it", that sound like a symbol when you are trying to do a cannot do operation.
What exactly are you doing in your edit activities when you see this circle with a line in it? Is it at the end of the mouse cursor?
Can you post a screenshot of it?
If my first impression of what this is happens to be correct, then "How do I get rid of it?" answer comes from
a. defining what you want to do
and
b. correcting any mis-steps you are taking in doing that
We will be watching for your follow up.
Thanks.
ATR

Lines needs to create when u create the header

Hi Friend,
this is my requirement,
1) i have header and lines related page, both header and lines will have save when you click the save button.
2) here i need to perform one validation that on save button, lines need to create when u create the header.header must have lines.
3)under save button i have written commit operatition, both line and header table having one common column called -> hid
can you please provide me some psudococe on this

Hey,
You can implement the above requirement in both ways:
1.Using EO
2. Using PLSQL Packages.
Using EO's
Create the below : MasterVO, ChildVO, MasterChildVL
Create an advanced table with details region in it. You can refer DevGuide for more info. if you want.
Make use of advancedTable : addRow functionality. When you commit it.. data will be saved in both tables.
Regards
Sridhar

Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application "Firefox" because it is not supported on this architecture.

I have PowerBook G4, running 10.5.8. Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application “Firefox” because it is not supported on this architecture. Thanks for the help.

Firefox 3.6.x is the last available from Mozilla for PPC Macs. 
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . 
http://www.floodgap.com/software/tenfourfox/ 
http://tenfourfox.blogspot.com/ 
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

I am getting horizontal white lines one inch apart when I print an Ai file

I am getting horizontal white lines one inch apart when I print an Ai file

*White lines 1" apart showing up on my printouts*~
It is a NEW Epson 1430. However, I have horizontal thin white lines across my prints. (13x19in Paper) I've cleaned the heads, ran a test print, realigned and then reprinted - I keep getting the same white lines in exactly the same places.
I’m printing an AI file in Illustrator and the lines don't show up on my screen. Is there something wrong with the data? I am going to do more experiments to try and identify exactly what conditions cause this problem.
Thank you for your help!

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live. Then I have to restart by long pressing the power button. Can somebody plz help me

What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

I get fine black lines on my prints when i print my photos how do i get ride of them?

I get fine, black, grid lines on my photos when i print, how do i remove the black lines?

First run a print quality test. If that passes perfectly install the latest driver for the printer, even if you already have the latest driver installed.
If the print test results are not perfect run nozzle cleaning routines until results are perfect.
Sometimes an ink cartridge will fail, but before replacing an expensive cartridge run nozzle cleaning and print testing a dozen times.
HTH
-Allen

SQLPlus: Spool is wrapping lines at 80 chars when linesize = 1000

Similar Messages

Maybe you are looking for