SQVI to display the list of vendors with the email address

Hi can any one please provide me the steps for SQVI to get the list of the vendors(LFA1) with the Email address ( ADR6 )

go to t-code sqvi> enter ztest or any cutom name>create>enter title>enter comments
-->slect table join asa a data source and hit enter..
-->press shiftF1 and enter table name LFA1 and again press shiftF1 and enter table ADR6..and hit
enter
now you will get the table relation ship between the LFA1 and ADR6 ..
next go to se16 and get the value for the vendor and pass the value to adr6 ..
Prabhu

Similar Messages

Request to delete all the Lenovo accounts associated with my email address

Made the mistake of registering my Lenovo accounts on the US site which means that I cannot register any account information relevant to the UK (my address is one example) so can you either delete all the accounts associated with my email address so that I can create a new account on the UK site OR can you place all the accounts associated with my email under the UK site. Thank you.

joshkier wrote:
I've tried that but I just get this message
Unable to find the Lenovo ID and password combination you have entered. Please try again, or use the link below to create a new account.
Yet it works fine on the US site?
Can you try changing the regions from the lookup next to the lenovo logo at the tab after logging in the us site?
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

The iPhone comes up with an email address rather than the name after the update

Just updated my iPhone and when I now send a message it shows as my email address rather than name. What's the quick fix for this problem?

You're not being clear...
when you send a Message (iMessage/SMS) ?
or email?
Where does it show your email address?

Report for the list of meterials with sales text .

dear all,
can any body help me in code for list of meterials with sales text as discription.
thanks &rgds
vamsee krishna yadav

Hi Vamsee
The table for material related Sales data is MVKE.
If you want to display materials then you may write a select query on MVKE, selecting Sales Organization and Distributuion Channel.
the concatenate mat number (with the leading zeros), Sales Org and Dist Channel into what will be the 'Name'
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = '0001'
language = <language>
NAME = 'Name'
object = 'MVKE'
TABLES
lines = li_lines.
Now read the li_lines table for the Sales Text.
Thanks
Pushpraj

Third-party not defined in the case of vendor with plant assignment ?

We use a Third-Party Vendor to direct-ship some products directly to our Customers.
When transfers third party order form's PR STO PO, prompts the following information
Third-party not defined in the case of vendor with plant assignment
Message no. 06769
Diagnosis
You are entering a purchase transaction involving a vendor to whom a plant has been assigned. Normally, this will involve the transfer of materials from one plant to another.
This process necessitates a delivery and a billing document in the SD system. The PO appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, an item with the procurement form "third-party" (triangular business deal) cannot appear in the delivery due list.
Procedure
An item with the procurement form "third-party" can only be ordered from vendors without a plant assignment.
how should solve?
Many thanks, Adny.
Edited by: Andy Yao on Feb 8, 2010 3:58 AM

Hi Andy
Why u doing stock transfer order,in third party sales there is no stock transfer
Follow below procees for third party sales( Vendor ship materials directly to customer)
Create Sales order(Use item category TAS) >>> Purachase requisition(Automatically from order) >>> Purchase order >>> Vendor Invoice Verification >>> Invoice to customer
Kapil

Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

TC for the List of PO with GRR and PR

Dear all,
What is the TC for the List of PO with GRR ?
How to see pending list of purchase requisitions ?
Pl' tell related tables also for ABAP ?
Thanks.

Transaction code to view PO list, you can see it in ME2M,ME2L
Transaction code to view PR list ME5A
Full MM Transaction Codes Flow with table
Purchase Requisition ME51N (Table - EBAN) RFQ to Vendor - ME41 (EKPO, EKKO) Raising Quotation - ME47 (EKPO, EKKP) Comparison of Price - ME49 (EKPO, EKKO) Creation of PO - ME21N (EKPO, EKKO, EKBE, EKPN, EKKN, EKPV) Goods Receipt - MIGO (MSEG) Invoice (Bill PAssing) - MIRO (BSEG) Goods Issue - MIGO (MSEG) Physical Inventory - MI01( Create doc) (ISEG)
MI04 (Enter Count) (ISEG)
MI07 (Post) (ISEG)
Regardsv
venkadesh
reward if helpful

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Any option to get the list of Invoice with respect to Sales Area

Dear All,
Is there any option to check the list of Invoices with respect to the Sales area.
Because, in VF05, we are getting the list either for a Payer or a Material.
I want to see the list of Invoices for a Sales area. I mean, it should be similar to VA05, where we can get the list of Sales Orders even without providing the Customer and Material information.
Reagrds,
Mullairaja

HI
Use the T code VF05N and select the option Bill documents in Fi
Here you can get the list of invoices
Try with MC+2
regards
Prashanth
Edited by: Prashanth@SD on Nov 11, 2010 9:44 AM

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton

Report to show the list of Equipment with Attachment.

Hi Experts,
i have attached a file in Equipment Master IE02. Any report can show the list of equipment with attachments?
Please advise.
Thank You
Best Regards

If you are using IE02, then i think you are using object services - I have never seen a way to view these in an equipment list. You can only view these while looking at the equipment. If you use DMS (tcode CV01N) these will show on IE07 as well as in the notification or work order when you use this equipment.

Any report or Table to see the list of orders with errors in SAP CRM?

Hello All,
Can anyone help me in getting a table or report to find the list of orders with errors in SAP CRM?.
Let me know if you need any additional information.Thanks in advance.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 26, 2010 11:59 AM

Hello Chait,
I got the solution by this report CRM_ORDER_CHECK_STATUS.
Anyhow thanks very much for your inputs.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 30, 2010 8:48 AM

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

I just dowload and pay the new LR6. I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

thank you very much!
everything's allright
bye

SQVI to display the list of vendors with the email address

Similar Messages

Maybe you are looking for