Sreen gets cut in production client after sending a transport

Good Day,
after taking a transport to production the screen cut other columns but  on Development and qas is fine and the transport pass throught those client.
Please see production screenshot below.
Thank in advance

I too have faced the similar problem but luckily not in Production system (Enhanced screen not transported to Production as of now. Need to check the behavior after transporting).
Though the exact reason is unknown (at least for me), I have temporarily resolved by changing the SAP GUI theme.
I am facing the problem with 'Enjoy Theme' but when changed to 'SAP Signature theme' then Restart the system (not SAP Logoff, restarting the whole system), then it is working fine for me. I can see the full screen without any cuts.
Please check if it is the case for you and share your findings.

Similar Messages

  • Outlook 2003 Suddenly cutting off email text after send

    Hi everyone,
    Some of my Windows 7 Users are experiencing a new issue with Outlook 2003 on their Windows 7 Pro computers.  All systems affected are 64-bit.  Most of our users are on Office 2003 and utilize Outlook with an in-house Exchange Server.
    Just recently, in the last week or so, a few users have complained that after sending an email, a large portion of their message gets cut off.  I've seen examples where emails are cut off mid-sentence.  I suspect that a Windows 7 update maybe the
    cause here, but I haven't been able to figure it out as of yet.
    Does anyone know of any recent issues with any updates that might cause this?  I suspect that it may have something to do with the IE 11 release and that some of our machines are updating to this version (which Outlook uses of course) and this maybe
    the cause.  This is the path I am using to troubleshoot, but wanted to see if anyone else with old software had experienced these issues?
    Thanks!

    32/64 OS Windows 7 with Outlook (office) standard edition 2003 - email set as HTML format and Word OFF as editor ++ IE 11 causes the issue here - cuts off the text AFTER the save on sending.
    Reverting users affected to IE 10 seems to have fixed the issue here and using GP to lock out any options in IE to allow users to upgrade it and stopping any WSUS \ SCCM updates for IE 11 security to prevent it coming back down.
    I guess we are all to blame as much as M$ - Outlook 2003 is over 10 years old and IE integration with HTML editor in Outlook was what we did in 2003 days - if we upgrade IE then its not a great surprise to find something breaks that relies on it.
    I would be curious to know if this issue is affecting any of our Outlook 2013 \ 2010 friends with HTML formatting and using IE11 on Win 7 or 8.
    I have licenses for our users to roll up from 2003 but its such a monster job I have hidden from it for..well 10 years due to training, macro and style manamgement issues and the shear pain I know will come out from users saying, "wehere my wee icon for
    ..." . BUT '03 is nearly end of life folks and although new does not = nirvana ((in fact I can't wait to find the many pains of 2013 Word and Outlook)) I suspect M$ will not be in a huge hurry to write a fix for a product that they are canning for support
    soon - so I guess we either roll down to IE10 or roll up to 2013 Outlook.
    Robert Crichton

  • Titles get cut off when playing after the burn

    The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
    Any help is appreciated.

    You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

  • H-REAP : difficulty to get IP-adress for client after loss of controler

    Hello,
    I configured the following:
    - H-REAP Wlan
    - H-REAP AP
    -There is no trunk port on the AP, so "Vlan support" is unchecked in the AP config. Because I want to transit the Capwap data and the H-REAP data on the same vlan.
    -I Have controller 5508 version 6.0.182.0
    The first time I connect with my PC to the H-REAP Wlan, I get an Ip address
    I see the DHCP request going out of the AP.
    I can disconnect and reconnect many times with my PC, and I get all the time an IP-address.
    Then , I disconnect the link between the AP and the WLC, and I reconnect it after a few minutes.( So the controler is again joined by the AP)
    Then, when I try to connect the the H-REAP Wlan , it is impossible to get Ip address. I do not see "dhcp-discover" going out of the AP.
    I have a message in the log of the AP: "Client 0018.de6a.3058 had 1 AES-CCMP TSC replays"
    Even, if I reload the AP, the problem is still there.
    The only way I found to clear the problem, is to modify something in the H-Reap-Wlan config, and to apply it.
    Do you have any idea ?
    Michel Misonne

    You are maybe right.
    I do  4 actions/
    - Change  in Wlan  :
    1 Aironet IE  : From enable to disable (There is information in the packet that some older clients do not understand and clients can act in strange ways. So when we disable this feature, we find the client act much better
    2 Client exclusion  : from enable to disable (This feature comes into play if a client has issues connecting to the wlan 3 successive times. He then will be knocked off the wlan and has to wait 60 seconds to join)
    3 WMM policy  : from disable to allowed (If you have any WMM clients on the wlan they will be able to work/connect
    4 Upgrade my driver:  (This is always a good thing to do. The newer the driver the more fixes for previous issue on the older version driver
    And it woks fine.
    Thank you for your help.
    Michel Misonne

  • Not able to get data in production client in BEX query

    Hi Experts,
                       I have an SD related query which is working fine in development.
    in production while i run the query iam not getting data for three fields "ship to party" , "Bill to party" and "sold to party.
    I am able to see the data at the cube level but it is not reflecting in the query. Transportation of this query also
    did not throw any errors. Please provide a solution.
    Regards,
    susheeth.
    Edited by: Susheeth on Aug 4, 2011 1:26 PM

    Hi,
    Check if the characteristics used in query are direct objects from cube or navigation attributes of any other characteristics. In case of navigation attributes you need to have master data maintained.
    And as mentioned by Vamsi, check the text data maintained for 0CUSTOMER. And for checking data you can mark Key and Text option.
    Regards,
    Durgesh.

  • I am trying to load "The Sims" for OS X 10.1 and higher;  first time the game would lock up after the preview, now I can't even get the installer to load after sending the original installation to the trash.  What could I be doing wrong??

    I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party).  I definitely installed them in the correct order.  Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview. 
    I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install.  Now, the initial Installer on The Sims primary CD will not respond.  I have to force quit to unlock the install.
    I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
    Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program?  I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
    Thanks,
    Joe

    For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
    I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

  • How to get a DELIVERY / READ CONFIRMATION after sending an email

    What can I do to receive a delivery confirmation or confirmation if my sent mail has been read by the addressee? Thanks for the support!

    Hello,
    You can ask for a delivery receipt by this way:
    In terminal app, enter:
    defaults write com.apple.mail UserHeaders '{"Disposition-Notification-To" = "[email protected]"; }'
    where [email protected] is the account mail adress.
    This work fine except that it'll don't work if you send a mail to... Apple mail or some other apps that don't support receipt, but using this tip you'll sometime receive read notification
    If terminal is a trouble, use notification4mail you can find at http://www.logimac.net/index.html .
    Regards
    Fred

  • How do I get my SIM card back after sending it away to get fixed?

    My mom sent out my iPhone 5 for me almost two weeks ago to get repaired for a broken screen. Today I received a refurbished iPhone 5, however my SIM card is nowhere to be found. My mom says she didn't take it out of my phone before she sent it. Is there any way I could get it back?

    You carrier is interested in keeping you as a customer, so they should be willing to replace the SIM.  Ask them for one and they will tell you how you can receive it.

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • Successfully installed Lync 2013 via Click-to-Run, but getting "Choose your product" prompt

    After installing Lync 2013 client using method
    Click-to-Run "Deploy Office 365 ProPlus from an on-premises location",downloaded Office source is on local hard drive with the
    "config.xml" shown below. 
    I'm getting "Choose your Product" prompt after signing-in.  We have Office 365 Enterprise E3 plan and we just wanted to upgrade Lync 2010 to Lync 2013 (not the Basic).
     <Configuration>
      <Add SourcePath="E:\Temp" OfficeClientEdition="32" >
        <Product ID="LyncRetail">
          <Language ID="en-us" />
        </Product>
    <!-- <Product ID="VisioProRetail">
          <Language ID="en-us" />
        </Product>  -->
      </Add>  
      <Display Level="NONE" AcceptEULA="TRUE" />  
      <Logging Name="OfficeSetup.txt" Path="E:\Temp" /> 
      <Property Name="AUTOACTIVATE" Value="1" />
    </Configuration>
    Though Lync will continue to work when you close the window.  I need to deploy the full 2013 client to several
    machines locally.
     Thanks.

    Hello,
    Looks like you‘ve tried a hybrid deployment with Lync 2010 and 2013, right? This might be the reason why Lync 2013 keep prompting to choose your product. Lync 2013 will automatically identify the products that it found for your account which you used to
    login Lync 2013.
    So, please try to remove any earlier version (Better to remove all Office 2010 suite) on your computer and try a fresh installation again. Let’s see the "Choose your product" prompt would appear again.

  • Replicating Product groups after client copy WRONG

    Hi Folks,
    I've taken a client copy from client 100 to 050 in both SRM SD1CLNT100 and ECC ED1CLNT100.
    I've done BDLS to replace log. sys. in both systems for both SRM and ECC log sys. eg. ED1CLNT100 to 050 and SD1CLNT100 to 050.
    After replication of config and product groups I'm stuck with the product groups replicateded in CLNT100.
    I get the root node after replication of product groups in the new 050 client but all the product groups are not copied!
    Any ideas to what I'm doing wrong?
    Thanks in advance,
    Thomas

    HI Thomas
    Can you pls go through following replies  --- 
    1 how to delete Product Category ?
    2 Re: Updating Product Categories
    3 Deletion of Product master on Production Client
        Run transaction BDLS to convert logical system from old ID to new logical system ID. The logical system ID now would be PR3CLNT700
    regards,
    Nimish Sheth

  • HT1918 When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

    When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

    If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front.  This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card.  This doesn't mean that your credit card will be charged.

  • I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Thanks

    I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance

    I have the same problem with another TeamLava app, Fashion Story.

  • I have a laptop PC and am trying to install my product.  After the download is complete I get an error that says "the file archive part of Adobe Photoshop Elements 13 is missing. You need all parts.

    I have a laptop PC and am trying to install my product.  After the download is complete I get an error that says "the file archive part of Adobe Photoshop Elements 13 is missing. You need all parts.
    Please help, I don't know how to do this
    Thanks

    you need both the exe (which you have) and the matching 7z (that you don't have, yet).  dl it:
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

    Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

    Hi Ankita,
    Try to trace at ICM level, Go to smicm transaction
    Set level to 3.
    Later send your request. Finally trace the request in:
    When you have seen the log, check if any exception is raised with your request or the request and share it here.
    Regards.

Maybe you are looking for