SRM 4.0 notes on position-level, possible?

Hi together,
does anyone know, if it is possible, to add a textfield on position level to a shoppingcart for release and rejection?
Can this be done through customizing or will it be a bigger modification?
Thanks in advance for the answers!
Cheers
-Jens

Hi
Did by any chance you looked to SAP OSS Note - 672960 for creating customer (bespoke ) fields - at any level (Header / Item level in shopping cart ) ??
Regards
- Atul

Similar Messages

  • Role level mitigating controls not affecting position level reports

    Hi,
    Here's the problem we're having with mitigating controls:
    When I assign a mitigating control to a role, it correctly mitigates the risk when we perform a role level SoD analysis.  However, when we perform a position level analysis, the same role shows up again in the report as not mitigated.  Anyone else running into this issue?  We are on CC5.2 with SP4.  Is this fixed in later SPs?
    Simple Example:
    Role ABC has conflicting tcodes FBV0 and FBVB.  We applied a mitigating control to this role and it doesn't show up anymore on the role level reports.
    When running the position level SoD analysis, position number 50010000 contains role ABC and the same conflict shows up again even though the conflict is entirely within Role ABC and not with other roles that are in position 50010000.
    Thanks,
    Robert

    All,
    I opened a customer message with SAP and it seems that this issue is a limitation with CC 5.2  Mitigating at the role level will will not follow through to the position level reports.  However, it seems that it will follow through to the user level as long as you have configured it under the Configuration->Additional Options tab.  There is a setting there that will allow rule level mitigating controls to take affect at the user level.
    Thanks,
    Robert

  • Updating Attributes at Position Level in SRM

    Hello,
    I need to update the extended attributes 'Approval Limit' & 'Output Limit' at the position level in SRM Org structure.  Could you please help identifying the right FM to use.
    I have tried the FM BBP_UPDATE_ATTRIBUTES but it seems it works only for Users and Org units. I am not able to update the position.
    Need help.
    Thanks,
    NB

    Hi,
    You can use FM BBP_UPDATE_ATTRIBUTES.You can also use Report RHOMATTRIBUTES_REPLACE for massive replace.
    Some other FM's:
    BBP_LOC_ATTR_IT5502_UPDATE
    BBP_WEIGHT_UPDATE_ATTR_WEIGH
    Good way is to define MS Excel file with users and attributes and create own FM to upload these data.
    Looka at this weblogs:
    /people/kathirvel.balakrishnan2/blog/2005/09/07/remote-function-call-to-sap-system-using-microsoft-excel
    /people/kathirvel.balakrishnan2/blog/2006/05/08/data-upload-into-sap-from-microsoft-excel-150-abap-part
    BR,
    Disha.
    Pls reward points for useful answers.

  • Delivery address appearing at Item level and not at Header level in PO

    Hello Experts,
    We are facing an issue as described below:-
    We are in SRM 7.0 using classic scenario.
    After approval of multi line Shopping Cart in SRM ,PR's are getting
    automatically created in backend R/3 system.After converting PR's into
    POs in backend R/3,we are observing that the delivery address for these
    PO'are getting printed at Item level and not at the Header Level
    inspite of the delivery address being same for all the Item level.
    As desired,the delivery address in the PO's should have the delivery
    address at the header level if the the delivery address is identical
    for all the Item Levels.
    However,if we create a PR directly in R/3 system and then convert these
    PR's into PO's in the backend R/3 system,we find that the deliver
    address are getting printed at the Header Level if the delivery address
    is same for all the item level(which is as desired)
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    HI Paul,
    Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
    However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
    Can you plz some insite into this?
    Your help will be highly appreciated.
    Regards,
    RKS

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • How can i NOT include top level keyword in the metadata of an image?

    Hello,
    I want to know how can i NOT include top level keyword in the metadata of an image. I know there is an option for not applying a keyword to an exported image, but is there an option for not applying the top level keyword to the actual image?
    I have organized my geographical (by location) keywords like this:
    Places
    USA
    New York
    Miami
    Spain.
    If i add geographical keywords to all my images, all my images will have the keyword "Places", i dont think that it have any sence to have all your images with one keyword. How can i fix this? Any sugestion? i will appreciate it a lot any help or information that you could give me.
    Excuse my english, i know it is not good. I hope that you could understand me.
    Thanks,
    Marcelo :)

    Explicitly excluding a keyword only applies when "exporting". Unfortunately, there's currently no way to stop the keyword being written to the file when "Save Metadata to File" command is used. The natural reaction of users to this difference is to suggest that it is stupid. Nevertheless, there are good reasons why the difference exists:
    1. "Export" creates a new file whereas "Save Metadata to File" writes the metadata back into the existing file.
    2. There are very good reasons why certain keywords should not be written to file, and the example given in the OP is one. Saving metadata to file is more often used as means of backing up important image related metadata, independently of the catalog or allowing the metadata to be visible in other aplications. It would be rare that such a file would be shared with a third party, so the reason for not including certain keywords is less obvious. Actually, not including it can result in no end of confusion and grief. For example, if the top level (or any keyword) was excluded during the save metadata process then the other keywords would be orphaned when image is imported back into the catalog (e.g. buiding a new catalog).
    The development team are aware of the need, in some circumstances, to exclude certain keywords when save metadata command is used. How and when the issue is resolved, without adding even more confusion/complexity, is some way off.

  • I have an IT guy coming to install apps but I need to password protect my existing apple notes. Is this possible?

    I have an IT guy coming to install apps but I need to password protect my existing apple notes. Is this possible?

    No, there's no passcode protection for Notes.

  • Message zclass not found in Programs  (possibly dynamic calls!)

    Hi Experts,
    When we are running MIRO transaction, Zmessage error is triggering. when i double-click on error message it is showing
    "Message ZFI 002(Class) not found in Programs  (possibly dynamic calls!)"
    Please provide your solutions to resolve the issue.
    Regards,
    Bharat
    Moderator message: please do some research before asking.
    Edited by: Thomas Zloch on Mar 15, 2011 9:21 AM

    Dear Miciuli,
    I found the definition for the circle in the canvas class and used it to creates circles ! Thank you for jaring my brain into thinking !
    Stan
    Ellipse2D.Double circle = new Ellipse2D.Double(xPos, 70, 30 , 30);

  • Labels on Forms are not maintaining positions when viewed on a different computer

    I have a project with 14 forms.  The labels for the text boxes are perfectly aligned on one machine, yet when I run the project on a different machine (same screen resolution and all fonts available) many of the labels are no longer left- or right-aligned
    as designed.  I have experimented with changing the Autoresize settings (using Font, DPI, etc.) for the forms as well as the text alignment settings for the labels themselves, but they don't fix the problem.  I am using Visual Basic (Net 4.5) in
    Visual Studio 2013. Any ideas??

    Hi DrDon81,
    According to your description, the labels on forms are not maintaining positions in different machines.
    I suggest you disable the AutoSize(set to false).
    Or you could put the label in a panel or similar, then use Dock instead of just Anchor property.
    If it still not working, you could share a little sample which can reproduce the issue. we could help you better.
    Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have lost my iphone4s and I would like to recovery my photos that do not share, it is possible?

    Hi, I have stollen and I would like to recovery my photos, but I think that they are not share, it is possible? That pictures are not from my backup, they were took before a backup

    Did you have Photo Stream enabled on the phone?
    If so, you can recover photos from the last 30 days.
    If not then they are gone unless you recover your phone.

  • Error target not found base-level failed to install the packages

    Im trying to install arch on my Virtualbox VM and its just returning:
    error target not found base-level failed to install the packages to new root
    What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

    Please read the following and follow the advice included:
    https://bbs.archlinux.org/viewtopic.php?id=57855
    With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command.  If it was in your original command, that would explain your results.

  • My 27 inch iMac screen will not hold position when I move it.  It just drops back to the lowest position.

    My 27 inch iMac monitor tilts forward and will not hold position when I adjust it up.. Is there a tension adjustment for the monitor position?

    That is a hardware issue that will be covered under warranty if the machine is a 2012 or later iMac. Bring it into your closest Apple Store or AASP for repair.

  • Error: You are not one of the possible agents of task 'WS99900032'

    Hi frnds,
        I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
    Can anyone give me solution to solve it?
    thanks,
    Suganya.

    You are not one of the possible agents of task 'WS99900032'
    You need to refresh the  organizational environment and then execute the workitem
    1. First make the workflow tempalte as General task and then
    Goto PFTC ---> enter the workflow tempalte number by selecting workflow template  ---> open in display mode and on menu Addtional Data ---> agent assignment  ---> Maintian ---> select General task
    2. Goto SBWP  -
    > Seetings  -
    >workflow settings -
    > refresh ornozational environment and then try to execute the workitem

Maybe you are looking for