SRM 7 EHP3, change text in popup message (create confirmation)

Hi everyone
I have a requirement where we need to adapt some text within a popup message. This popup message appears after hitting "confirm" button in the "create confirmation" app.
After some researches we found that this text is stored in a text element (text symbols) of class /SAPSRM/CL_CH_WD_IDEN_MAP_CONF
What is the best approach to adapt this text without doing a modification?
Thanks anyone.
Renaud

Hi Laurent
Thanks for your suggestion! But AFAIK this approach does not protect our translations (text changes) from being re-overwritten during system upgrades (see note 485741) and furthermore it would be treated as a modification (appears in SE95 - modification browser).
Isn't there a truly modification free method?
I also tried to enhance class /SAPSRM/CL_CH_WD_IDEN_MAP_CONF but I'm not sure how / what to implement in my Z-enhancement now to have it "overwrite" SAP's original text symbol n° 043.
Any ideas?
Best regards,
Renaud

Similar Messages

How can I change text of system messages?

I'm developing application running in Russian language, it's not supported yet in development environment, but it's OK, I can read English. Our future customers know only Russian, so they don't understand text like 'row(s) 1-10 of 213' ('Row X to Y of Z' pagination schema). Is there any way to change some (not all) system messages shown during application run to Russian? I can't find how to do it in documentation and forum.

Alexey,
The pagination strings are customizable in the report template definition. There are a number of built-in templates that are prefixed with "default", which you can not customize, but they are followed by the report templates defined in your application which are prefixed with "template:". One commonly used template for example would be alternating-color-rows. If you edit this template in the template section of the application builder and scroll all the way down to the region titled "Pagination Subtemplate", you will be able to customize the pagination strings to your needs. Please refer to the item level popup help for the exact syntax that you need to apply. You may not be able to fully customize all pagination styles, but you should be able to define an acceptable pagination style that only uses Russian terms.
Regards,
Marc

Pricing date change on service order when creating confirmation.

Hi gurus,
I want to change the pricing date (and recalculate prices)on service order to the date confirmation is created from the service order.I would like to know if this can be achieved by copy control BADI or order save BADI or pricing BADI ?
Please guide if anybody has already achieved this functionality.
Thanks
Dona

Hi Dona,
Pricing manipulation for an order can be done by using CRM_PRICING_BADI.Use the method CRM_PRICING_MERGE, here you can use the changing parameter CS_PRICING_BADI to change the pricing data.
Hope it helps you.
Regards,
Shweta

Change warning to error message in Confirmation (CN25)

Hi All,
Please advice how to change warning message to error message . I have network activity and fill the work value = 30 HA. but it seems that users can still posting the confirmation more than the value inputted.
100% of planned time already recorded - please check
Message no. RU254
Application Area : RU , Message 254 , program SAPLSHL2
Cheers,
Nies.

Hi,
Try out, in the below mentioned path.
SPRO>Production Planning for Process Industries>Process Order> System Modifications>Define System Message attributes.
Select System Messages--> Click on New Entries and mention your message number with application area.Maintain the message as error.
Just check whether you are able to make it an error.
But when I tried your scenario I got a different Message number BU011.

Is there a way to center the text on a message popup

Looking for a way to center multiple lines of text on a Message Popup.

sdrochek3 -
The step type does not export any option to center text that it displays. If centering text is a requirement, you will need to create a custom dialog in your ADE of choice and display that instead.
Scott Richardson
National Instruments

How do you change the background color & font in a text-only popup?

It has been ages since I did this and I can't seem to remember how. I tried to edit the style sheet but it only has options to change the text-only popup hotspot/link and I need to change the background color and font style within the popup itself. Tried Adobe's help but it had no answer for me. Any one out there know how to do this? I am running RoboHelp 7.

By Popup do you mean a link that when clicked causes a separate topic to be displayed in a seperate window (popup) or Drop Down text?
For Popups that are displayed in a new window then the font and colour is changed in the topic that is displayed. Simply open the topic and change colours / features as required
If you are using drop down text and confusing this with a popup then the font and colour is changed when creating the drop down text. Right click the text and select Font to change colour etc.

Display popup message on SRM portal

Hi,
I need to display a popup message on the SRM portal while doing a PO confirmation. Can you please guide me how to do it?
Do I need to modify the templates or can it be done using a BADI?
Thanks in advance.

Hi,
Try using CHANGE badi.
See these related threads also for more pointers:
Error in pop up (dialog box)
Customized Pop-up window in Shopping Cart
POPUP window in shopping cart during Order
BR,
Disha.

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

How to Change text of link in SRM

Hi All,
How to Change text of link in SRM . The Link is in leftside of the screen in webportal.
I needs to change the text of link ' Shop' , 'Check Status' and 'Confirm Goods / Services.
Kindly helpout me.

Hi Rob,
Thanks a lot for reply.
You are right i am suppose to change in BBPGLOBAL.
But i am not getting where should i change.I am unable to find the parameter in BPGLOBAL.
Kindly advise me.
Regards,
Vasu

Problem to create change pointer for custom message type - Idoc creation

Hi,
We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
Can anybody help / guide?

Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal.

I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish.

When selecting SMS/Text Message iPHone 4 changes it to MMS message!

I am having a weird problem with my iPhone 4 - when I select "text message" either by starting a text from the "messages" menu or from within "contacts" it sometimes (about 50% of the time) tries to change the message into an MMS. If I don't attach an image it won't allow me to send even though there is only text in the message.
I can't seem to find a wqay to change it from an MMS to a standard text message so end up cutting the text, switching the phone off and on again and trying to paste the same text into a new message. This only works some of the time .. very curious to know if anyone else has this problem as I LOVE this phone but this particular thing is driving me crazy!! Thanks

May be that it has become necessary to swap out one application module for another to initiate the SMS Application.
With all the new features recently added by Apple such as the iTunes Store, Apple may have had to implement an application switching algorithm to keep the maximum memory available for videos, music, ringtones, etc. storage.
Just one possible reason for a delay - application switchout (paging).

JS confrim popup message box - How to change it into yes or no button?

confirm popup message box is always with OK or Cancel Button?
How to change it into Yes or No Button?
Thank you.

I don't think you can change those buttons. However you may try use some rich Javascript library like YUI (Yahoo! User Interface) to pop up custom alert and confirm boxes.
See [http://developer.yahoo.com/yui/examples/container/simpledialog-quickstart.html]
Cheers,
Hari

How to change text in PDF doc. which is a musical score

Hello,
I'm new here, so please excuse me if I do or say something I shouldn't.
I need to change the words in a musical score because the font is too small. OCR recognition doesn"t work because there are illustrations that are different from images or text... Is there a way to get in there and make the changes I need to do?
Any help greatly appreciated.

Thanks for the reply, but I have Adobe Reader 9 Pro. Will it still not
work ?
Le 29 sept. 2011 à 29 sept. 11 - 16:09, Claudio González a écrit :
Re: How to change text in PDF doc. which is a musical score
created by Claudio González in Adobe Reader - View the full discussion
Unfortunately, not with the free Reader.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/3944833#3944833
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/3944833#3944833
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746

SRM - Problem with a SRM Order with text position

Hello,
I produced an order requisition from SRM. (Document Type EC / Field Sel.Key NBB) Unfortunately I cannot change the category of commodities during this order requisition over the transaction ME52N. This must be however possible. The appropriate Field Sel.Key NBB is correctly adjusted.
The problem apparently lies in SRM. With normal SRM orders in the R/3 an order is put on. The category of commodities may not be changed then no more.
With SRM orders with text positions a order requisition is to be put on in the R/3. Functions also. The category of commodities is not also here alterable only unfortunately. That must function however.
My question: How can one change the data of the order requisition with text orders over SRM?
Regards
J.V.

hi J.v
you can make new request rather than changing the purchase request since material group in important data.
why you want to edit the PR and again trying to edit the data in sc created from pr.
I recommend you to create a new PR for your request.
since
eprofile offered sap ecc according to your material grp / purchase group combination inthe eban table (eprofile field).
but why you are trying to edit the same pr in the backend method(it is no.2 activity in sap - not supposed to do right)
if you dont want that request cancel the sc (complete it).
hope now you understood.
br
muthu

SRM 7 EHP3, change text in popup message (create confirmation)

Similar Messages

Maybe you are looking for