SRM 7 - hide user settings

Hallo,
we use SRM 7 with NWBC as web interface.
I logon with employ role.
In the Home Menu I press SRM user Setting.
In here I have 2 tabs: ´Position´ and ´User Accounts´
Question:
how do I make the ´Position´ tab invisible
Thank you
Marco

Solved
Enhanced the webdynpro component view in SE80.
Thank you anyway
Marco

Similar Messages

Hide Display Settings not applied in User GPO

Hello,
I am trying to hide the display settings via a GPO so folks can't change the resolution. I set the "Disable the Display Control Panel" setting to enable, but users can still go to the Control Panel and change the display settings. Other parts of
the GPO are applying, like the Ctrl+Alt+Del settings. The GPO has the loopback function set to replace. From my understanding, that should force all user settings in that GPO on everyone who logs into the computer, whether they are in that OU or not.
Some settings apply, just not the Display settings. Is there something else I have to enable to get that working?
Thanks
Jason Watkins MCSE, MCSA, MCDBA, CCNA

Hi Jason,
It's been a while. How is it going? If it still doesn't work out, we can run command
gpresult/h report.html to collect group policy result to check this. Note: to collect computer part group policy settings, we need to run the command with administrative privileges.
In addition, regarding troubleshooting group policy issues, the following thread can be referred to as reference.
[Forum FAQ] Common steps to start troubleshooting Group Policy application issues
https://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SRM User Settings in SRM 7 for Operational role

Hi! If I assign role /SAPSRM/OP_PURCHASER to a user in SRM (with Operational Purchaser portal role), I could not find the SRM User Settings function. If I use role /SAPSRM/EMPLOYEE (with Employee Self-Service portal role), the function appears under Home > Overview > Personalization. I checked the content content and could not see this function available for the Operational Purchaser portal role. Does that mean I have to add the Employee Self-Service portal role to the user if I want to allow them to use the SRM User Settings function? Is there another way to get to this function using the Operational Purchaser portal role?
Appreciate any clarification on the above.
Cheers!
SF
Edited by: SF on Jan 12, 2010 1:06 PM

You observation is correct and it is the standard design of such portal roles as SRM Administrator, SRM Strategic Purchaser, or SRM Operational Purchaser to not have "personalization", but only Employee Self Service role.

SRM user settings not populated

Hello,
We are using SAP SRM 7.02 with NWBC and we are testing this in sandbox.user id has been assigned to sap_all and new and SAPSRM/employee_ehp1 role.
NWBC Launched --> Click on SRM user settings---> not populating the details/page navigation to details page is not opening.Pls see the screen shots.
When click on the SRM user settings same page is opening.
Please provide you inputs to resolve this.
Ranjit.

You observation is correct and it is the standard design of such portal roles as SRM Administrator, SRM Strategic Purchaser, or SRM Operational Purchaser to not have "personalization", but only Employee Self Service role.

Incorrect search help for Delivery address in SRM User Settings

Hi experts,
We use SRM 7.0. When i want to change Users Attribute Delivery address (in SRM User Settings) and call search help for this, than i get list with 3 identical addresses.
For example:
Value                          Label
111                         usa/Ny/1
111                         usa/Ny/1
111                         usa/Ny/1
222                         usa/Sf/2
222                         usa/Sf/2
222                         usa/Sf/2
333                         france/P/3
333                         france/P/3
333                         france/P/3
How can I delete undue entries?
Thanks a lot

Hi
Are all adreess numbers Unique ?
every ship to address has unique . can you check data base level ?
Muthu

SRM user settings deletion (like in program SAPBBPAT05)

Hello experts!
I'm currently working on a user upload program
In this program I update some user settings which are available in the web interface via the "Settings" link in the header of the page
I already found how to add new attributes (thanks to the function module BBP_CHANGE_ATTRIBUTES)
But I didn't managed yet to remove some attributes.
Does one of you know how to delete a line from user settings by using ABAP code?
Thanks in advance
Best Regards
Damien

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Set Default User settings in BRF Plus

Hi All,
We want to set some default setting for a set of the users for BRFPlus gui.
For Example:
1. We want to display row no in the decision table as the first column for all users.
2. In the decision table, we want some columns ( from result section)which are actually in the end on the right of the screen should be visible as first column.
I know these can be achieved using user settings. But we want to default this for all the BRF Plus users.
Can we create one setup and assign it or default it for all BRF Plus users? Like we do in SAP R3 defaulting menus for SAP users.
Thanks In Advance.

Hi Carsten,
Thanks for the hint.
We have already used the blog to hide some features from users view in custom catalog. After your reply I revisited the our code and added few more lines of codes to display row number. But the Row Number was not displayed. Guessing if anything is missing.
Is it not possible to do at user profile level for mass users. Like we do it for SAP R3 Users?
Code Snippet:
METHOD if_fdt_wd_ui_mode~get_configuration.
*Get the default configuration.
CALL METHOD super-
>if_fdt_wd_ui_mode~get_configuration
    RECEIVING
      ro_configuration = ro_configuration.
* Remove repository view.
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_repositor
y_view
       iv_value = abap_false ).
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_favorites
_view
       iv_value = abap_false ).
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_history_v
iew
       iv_value = abap_false ).
* Display row number
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_disp_dt_r
ow_num
      iv_value = abap_true ).

User Settings are not saved

Hello,
I am setting the values in User settings. It is sucessfully changedand saved, but the changes are not appearing while creating the shopping cart. In pposa_bbp also the value is maintained as default.
We are in SRM 5.0 classi scenario. Please let me know how to overcome this issue.
Regards,
Chary

Hi
Please try saving the user defaults in Web page by using
the transaction BBPUM01 / BBPUM02 for saving user defaults.
<b>In a productive EBP environment, you should run the program
CRM_COM_ORGMAN_BUPA_INTEGRATE on a regular basis, in
order to carry out automatic periodic matching.</b>
Alternatively, as Disha told, try executing the report as well.
Incase it does note helps, please raise an OSS message with SAP.
Regards
- Atul

Disabling "User settings" option from all the WDA applications.

Hello Experts,
We have implemented SRM business package.We want to disable right click "User settings" option from all the applications presented in SRM BP.
I know a way of disabling "User settings" by passing WDDISABLEUSERPERSONALIZATION parameter. We dont want to follow this approach as there are many applications and it would be difficult to change all the applications.
My question is do we have any settings ( may be in sicf ) which could disable "User settings" centrally for all WDA application on that particular server?
Thanks
Surender singh Dahiya

Hi surender,
Check this..
http://help.sap.com/saphelp_nw70/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
Cheers,
Kris.

Travel & expenses: Remove User settings option

Hi,
we have implemented Travel & Expense module in Portal using ABAP web dynpro. We are at EP 7.0 EHp2.
Navigation : ESS -> Travel & expenses -> My Trips and Expenses
Here If the User perform Right Click option then he get the option for : " User settings" and if he choose User settings then he further get the option to select the column / tab's to hide or unhide.
So we want to disable the right click option for the user OR at least remove the option of User Settings from User.
_vishal
<< moved by moderator - check out the list of other forums on top of portal forum >>
Links to other forums
Edited by: Anja Engelhardt on Jan 16, 2012 1:53 PM

Hi Vishal,
as far as I know, the right click cannot be disabled. I have two suggestions:
1. Modify the WebDynpro Application and add the Parameter WDDISABLEUSERPERSONALIZATION = X.
2. Alternatively (this is what we did) you can call the application WD_GLOBAL_SETTING in SE80 and globally disable all user personalization for all applications. This avoids endusers from calling helpdesk because "fields are gone" etc. pretty well...
Cheers, Lukas

User settings in VC

Hello,
At runtime in Portal, when you right click on the VC application, you see the context menu of "User settings of Transparent Container - Generic" -> Hide Transparent Container, wherein the user could actually hide the whole VC application!
I would like to know two things:
1. How could I disable that option for the users?
2. How to unhide the Transparent Container?
To unhide certain parts / areas of the application is easy but I would like to know how that could be done for the whole application.
Thank you in advance.
Regards,
Dharmi

Hello
I am facing a similar problem for a textedit control in my abapwebdynpro application.
I read through the forum and came to that it is some personalisation settings issue. I tried the solution they said also. But still my control is hidden.
I went through your document attached in the reply of the above post also. But I don't have the admin logina and moreover this is for a single control of an application.
Can you please help me out.
Regards,
Linda

Fields in User settings not filled

Hi
Under user settings in tab "Position" the field Dept. and Position is not filled. The user is correctly maintained in PPOMA_BBP. The user was maintained in SRM with the use of transaction USERS_GEN.
What could be wrong?
This causes some dumps for the user when he wants to look at created SC.
Sincerely
Anders

Hi Anders
do you see two tabs
POSITION + USER ACCOUNT
i think in fist time you may not see Position details and go to User account tab click.
First you go to user acount tab and click and again you go back and click position and again you go to user account and come back to POSITION.
later you can see Dept and position at right hand side.
regads
muthu

User Settings Attributes Search

Hi,
In SRM 7.0 User Settings I have 2 users and am trying to add a plant. User 1 has company code 0100 and when adding a plant, the drop down search list contains all plants associated with company code 0100. I can successfully add a plant for this user.
User 2 has company codes 0100, 1000, and 1002. When trying to add a plant, the drop down search list only contains the plants associated with 1000 and 1002. I am unable to locate a plant associated with 0100.
Their security access is identical. Any suggestion as to what is causing this is appreciated.
Susan Bennett

Hi Dhananjay and Bharath,
You are correct that a plant can only be associated with 1 company code. But our users can create carts for multiple company codes and plants.
These 2 users are set up identically except for the fact that one only has a single company code set up in User Settings and the other has 3 company codes. Only the plants related to two of the company codes are retrieved when doing a plant search. This prevents adding a plant for the 3rd company code in User Settings.
I tried looking for an OSS note that might address this, but didn't find anything and thought that the experts out here may have heard of this before and be able to offer some assistance.
Thank you...Susan

Hide Quota Settings in Exchange ECP for Helpdesk Administrator

Have the following:
Windows 2012r2 on top Exchange 2013 mbx
We have to delegate admin role for helpdesk admin. But we want to hide Quota settings in User mailbox properties.
1,created a custom role based on the parent role "LJ Mail Recipients"
2,remove other cmdlets than the Mailbox Statistics,
3,remove other parameters other than -*Quota*
4,assign the custom role to the helpdesk admin
I could see still the Mailbox Usage appears, how to hide the mailbox usage from user properties.
Please help!
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Hi aganesh007,
Thank you for your question.
There are two sentences which confused me, I want to get deeply state:
But we want to hide Quota settings in User mailbox properties.
remove other parameters other than -*Quota*
I will give a solution to meet your requirement which is “remove other cmdlets than the Mailbox Statistics”
a. Create a role which is Mailbox Statistic:
New-Managementrole –Name “LJ Mail Recipient” –parent “Mail recipients”
Get-ManagementRoleEntry “LJ Mail Recipient \*” | where {$_.name –ne “Get-MailboxStatistics”} | Remove-ManagementRoleEntry
Then we could type “A”.
b. Customized role group and Role was add role group
New-RoleGroup –Name “Manage Recipients for Helpdesk” –Roles
“LJ Mail Recipient” –RecipientOrganizationalUnitScope “contoso.com/Users”
c. Add the user you want to grant this connect-mailbox permission to this role group through EAC
When we add user to Manage Recipients for Helpdesk, we could check if we could see mailbox usage.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Reset ALV User settings

Hi,
I have defined an ALV dynamicly. When I add a new column to the ALV it is not displayed. Doing right click and going to 'user settings' I see that the column is added to 'Hide column'. Changing this manually shows that the new column is presented in the ALV.
This only happend if I had once clicked the user settings and did some things and SAVED. So somewhere my user settings are stored.
My question:
- How can I reset my ALV user settings in webdynpro in a way that new defined columns are directly presented ?
- Where are these ALV user settings stored ?
Hope you can help.
Cheers, John

HI John,
As sarbjeeth suggested, get the variant(personalisation info) details from the WD application wd_analyze_config_user.
Run this application and search for the variants of the component SALV_WD_TABLE(ALv component), identify your variant and note the details like config name,config variant, config type etc.
Then in the WDDOINIT , you can try deleting like this.
DATA lo_api_controller TYPE REF TO if_wd_controller.
DATA lo_pers_manager   TYPE REF TO if_wd_personalization.
data lv_variants       type WDR_PERS_VARIANTS.
data lv_config_key     type WDY_CONFIG_KEY.
data lv_bool           type wdy_boolean.
*   get personalization manager
lo_api_controller = wd_this->wd_get_api( ).
lo_pers_manager = lo_api_controller->get_personalization_manager( ).
lv_config_key-CONFIG_ID = '29A71D1A8C9565ED7315B87A8CC21C94'. "These details are got from     the wd_analyze_config_user application
lv_config_key-CONFIG_TYPE = 07.
lv_config_key-CONFIG_VAR = 'ENX0N9'.
CALL METHOD lo_pers_manager->delete
EXPORTING
*    scope                     = 1
    config_key                = lv_config_key
*    transport_personalization =
*    trkorr                    =
receiving
    success                   = lv_bool.
Thanks,
Aditya.

SRM 7 - hide user settings

Similar Messages

Maybe you are looking for