Set Default User settings in BRF Plus

Hi All,
We want to set some default setting for a set of the users for BRFPlus gui.
For Example:
1. We want to display row no in the decision table as the first column for all users.
2. In the decision table, we want some columns ( from result section)which are actually in the end on the right of the screen should be visible as first column.
I know these can be achieved using user settings. But we want to default this for all the BRF Plus users.
Can we create one setup and assign it or default it for all BRF Plus users? Like we do in SAP R3 defaulting menus for SAP users.
Thanks In Advance.

Hi Carsten,
Thanks for the hint.
We have already used the blog to hide some features from users view in custom catalog. After your reply I revisited the our code and added few more lines of codes to display row number. But the Row Number was not displayed. Guessing if anything is missing.
Is it not possible to do at user profile level for mass users. Like we do it for SAP R3 Users?
Code Snippet:
METHOD if_fdt_wd_ui_mode~get_configuration.
*Get the default configuration.
CALL METHOD super-
>if_fdt_wd_ui_mode~get_configuration
    RECEIVING
      ro_configuration = ro_configuration.
* Remove repository view.
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_repositor
y_view
       iv_value = abap_false ).
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_favorites
_view
       iv_value = abap_false ).
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_history_v
iew
       iv_value = abap_false ).
* Display row number
ro_configuration->set_parameter( iv_name =
if_fdt_wd_user_configuration=>gc_parameter_disp_dt_r
ow_num
      iv_value = abap_true ).

Similar Messages

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

Default user settings in cProjects

Hi all!
Does anyone know if it's possible to change the default user settings in cProjects at user creation?
Basically, we would like to have the processing mode set by default as "display" instead of "change".
After user creation in the backend/portal, table SPERS_OBJ is not updated with the settings.
When entering cProjects application the first time, I noticed that the table is updated with default value, espacially DEFAULT_MODE = ' '. However, it seems that SAP standard takes "change" as the default value.
I know that we can do this manually in SU01, tab "personalization", then DPR_USER_SETTINGS. However we would like to have this value automatically set, without having to set it manually if possible.
Thank you.
Matthias

Hi,
Please try following.
PFCG=>enter role=>personalization=>Personalization obejct key DPR_USER_SETTINGS=>select the Processing mode "Display" and then assigned the role to user.
Regards
Yogesh
Please award points for useful answer

Customize default user settings for new RemoteApp logins

Hi all,
I'm poking around with RemoteApp on Windows 2012 R2 and have it set up to use a centralized file share for the user profiles and everything seems to be working ok. Is there a way for me to customize some of the options in a user's profile for the first time
that they fire up a RemoteApp? Is it like a physical desktop where the hidden "c:\Users\Default" profile gets copied into the new user profile? I know once a user saves settings in a RemoteApp (browser bookmarks, default program options, etc....)
it gets saved in their profile on the central file server but I'd like to save them as much time as I can by giving them a precustomized profile.
Thanks

Hi Brian,,
Thank you for posting in Windows Server Forum.
Kindly check below thread where described for editing the rd web page file and some other method to set default user.
How to set default logon domain RD Gateway and/or RD Web
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f02bd61f-d6fd-4c05-b17a-deffcc61a4e9/how-to-set-default-logon-domain-rd-gateway-andor-rd-web?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Default User settings

I want to change the default user settings in iPlanet Directory Server 5.1 so admins can create individual users in the JAVA Console with the specific attributes needed by our organization per branch point.

key phrase: per branch point. I take it you mean that entries below a particular branch point share the same attribute/value pairs? That leads me to suspect that class of service would be of use to you, and the console would not need to change and your admins would not need to enter the info per user.

Set Default User Agent in Safari

Hi,
Can anyone tell me how to set Default User Agent to Mac in Safari for Windows. As when i start Safari every time now it gives me a default user agent while i want it to be Mac 3.1.
Will appreciate help. Thanks in advance.

Enable the Debug Menu and then use the User Agent switcher feature.
Custom PC Windows XP Pro

Setting Default Global Settings for Bex Analyzer 7 for all users

We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AM

Just so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran

Create default user settings like WIndows XP

When I configure a Windows machine I can make the desktop and all application settings I want. I then copy the profile to the DEFAULT USER account. Now when any user is created on that machine it takes on all the same settings as the default account.
This allows me to set proxy settings in all browsers, setup printers, backgrounds, and other other preferences. the new account gets these settings on creation.
How do I do this on the macintosh? When it creates a new user they all look the same so there must be some plist files or settings somewhere I can change when I build the image.
We have 850+ machines running 10.4 through 10.6. We use a firewall in transparent mode because the mac's cant handle the proxy settings with all the roaming profiles and home/synced accounts.
If I can get all new accounts created to take on the necessary settings by default we can switch our firewall to non transparent and that opens up a lot of features we must have. Plus it would be nice to have the same look and feel on every single account.
Lannie

/System/Library/User Template is where all of these are stored. You will have enable the root login account and log in to it in order to make changes to that folder with the GUI.
Changing anything in the System folder is always a bit unreliable, though. Apple might release a software update that will undo any of the changes.
If you really are managing 850+ Macs, you should look into getting OS X Server. OS X Server has the tools you need to set up custom templates for new users, without having to muck in the System folder.

Set Default User Agent

Safari 4.0.3
Is there a way to Set the Default User Agent to Iphone 3 and the user agent does not revert back when the Safari is restarted.
Current when I set the user agent to Iphone 3 and then restart the browser the Iphone 3 user agent is not retained. Is there a way to ensure that the Iphone 3 user agent is retained after a restart ?

So my question = is there a possibility to set "Internet Explorer 9" as default User agent string.
How about taking the tack that Compatibility Settings uses? Its default is IE7 and it is semi-persistent, apparently lasts until you clear your Cookies for it. So, what is in the Cookie? If it says make UAS = IE7 perhaps you could
change it to be something else? Alternatively, find out how IE7 becomes that procedure's default and see if there is something in that path which is changeable. Use ProcMon to investigate these ideas.
Alternatively, on another tack, look at the implementation of the Microsoft list, in IECompatData.xml. Some, apparently, have experimented with making custom changes in there. Then a problem would be that they would have to disable regular
checking and updating of that list or that again, their modifications would only be semi-persistent, and thus they would have to be prepared to periodically, on an unknown schedule, have to be ready to reassert their modifications.
FYI
Robert Aldwinckle

Set new users' settings to mirror admin's settings

First off, I apologize if this is in the wrong section. Admins, please feel free to move it.
I am on the IT team at a university. We have recently updated the Macs in one of our labs and I am working on getting them set up for students to use. The local machine has only an admin account. All other accounts will be created by active directory authentication.
I want to be able to set up a default profile to serve as a baseline for students when they log in. I have figured out how to make the default dock be a copy of admin's dock, but I am having a lot of trouble finding how to change the default mouse settings. I'd like to set the tracking to something other than painfully slow (these are 27" iMacs), and I also have installed the Mouse Acceleration Preference Pane (http://triq.net/mac/mouse-acceleration-preference-pane-mac-os-x) to make the mouse "feel" better. I would like this to start automatically as well.
These machines currently have no users, so applying settings to previously created accounts is not an issue. Is there a master template somewhere I can tweak some values in?
Thanks in advance!

Ok, so I've figured this one out. The problem was that the config was stored in a hidden file.
Show hidden files in finder by typing:
defaults write.com.apple.finder AppleShowAllFiles TRUE
killall Finder
into terminal. Of course change TRUE to FALSE to put it back.
On the admin account, go to ~/Library/Preferences/.GlobalPreferences.plist. I don't think I changed the permissions on the file, but its possible I did. Open this in xcode and it lets you change the settings graphically. I assume opening it with a text editor works as well. Check that this file contains com.apple.mouse.scaling - this is the mouse tracking speed.
Copy the ~/Library/Preferences/.GlobalPreferences.plist into /System/Library/User\ Template/English.lproj/Library/Preferences/ - this is where the template for new users is stored. The template (and all subfolders) will definitely need the permissions adjusted unless you are working in terminal as sudo.
After making the copy, all new users are able to log in with a natural feeling mouse. It seems the Acceleration Preference Pane started automatically, perhaps something I did earlier by accident?
Hope this helps.

Default user settings - prevent them from being wiped out

Elements 6.0 comes with intitial settings. For example:
Select tools have Anti-alias set to On.
The location of dialog boxes is pre-defined, then can be moved by the user. Eg Selection > Feather, Create new layer, all the Enhancements, etc.
Preset manager, Preferences.
Other ease-of-use things I don't remember.
When I exit the program my settings are preserved. The next time I open the program the settings are as I left them.
But if Photoshop exits abnormally, and sometimes when it's just ornery, my settings are back to the factory settings.
I figure these user settings are saved in a file somewhere. If I save the file and Photoshop reverts to factory settings, I should be able to restore the saved file and be back to hunky dory. But what file is it?
Anyone know what file this is, or another way around this nuisance problem?

Yes, you can save the current set of preferences and use those to replace corrupt preference files.
If on Windows, the preferences are in a hidden folder so you'll first have to "show hidden files and folders" on your system.
How to show hidden files and folders on Vista and Windows7:
http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vist a/
After you have "hidden files and folders" toggled to show...
If on Vista or Windows 7, type .psp in the start menu search bar, Photoshop elements 6 editor Prefs.psp (or worded similar) will show up in the list. Right click the name and select copy. Right click on your desktop and select Paste from the menu. Once this is done, you should now have a copy of your current editor preferences that you can move wherever you want to save them. You can do the same with the organizer preference file.
If on XP, you'll have to navigate to the file. As with Vista and XP, you'll have to show hidden files and folders first.
How to show hidden files and folders on XP:
http://www.howtogeek.com/howto/windows/display-hidden-folders-in-xp/
I believe, the file path you need to navigate to get to your preferences will be:
C:\Documents and Settings\[your user name]\Application Data\Adobe\Photoshop Elements.
Note: I would recommend when finished coping your preference files going back and toggling off "show" hidden files and folders.
On Mac, I believe you would find them using the path Barbara gives in post #1 of this thread:
http://forums.adobe.com/thread/732643

Setting default user agent string

Hi,
Anyone know how or if I can set the default user agent string in Safari? I know this can be done on the Mac by editing the com.apple.safari.plist file but it doesn't seem for Windows? I want to set this user agent string for testing purposes.

Hi,
Anyone know how or if I can set the default user agent string in Safari? I know this can be done on the Mac by editing the com.apple.safari.plist file but it doesn't seem for Windows? I want to set this user agent string for testing purposes.

BIOS not detecting notebook hard drive after setting default BIOS settings.

I had my Ubuntu 14.04 installed in my laptop in a drive named "Notebook hard drive" in addition to a pre-installed Windows 8. Today I set the default BIOS settings in my laptop and when I rebooted it and tried to use Ubuntu by pressing "F9" key and choosing from the BIOS menu I found my "Notbook hard drive" option missing. My Ubuntu drive is still there but I have no way to access it. Is there any way I can get it back to working?
This question was solved.
View Solution.

Try disabling secure boot in the BIOS and then restarting the notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Setting default user information for Pages templates

Over time I've added email & phone numbers to "my card" in Address book. How can I tell Pages which address & phone number to use for templates like Letters etc. right now it seems to pick old addresses & phone numbers (which I still need in my card, they just are not my first choice anymore.)
(Right now, I'm using Modern letter, but it applies for others as well.)
I know I could create my own templates, but it would be nice to be able to just use the builtin templates.
I can't find any preference in Pages or way to indicate a default in Address book.
thanks

But, to me, it seems logical that this would work.
Use -and instead of -or.
EDIT: To summarize, here's how you can get all mailboxes except a few:
$mbxs = Get-Mailbox | Where { $_.SamAccountName -ne 'bigboss' -and $_.SamAccountName -ne 'someoneelse' }
Here's how you'd return only the specific mailboxes you want:
$mbxs = Get-Mailbox -Filter "SamAccountName -eq 'user.three' -or SamAccountName -eq 'user.four'"
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)
Thanks for all the responses! This was exactly what I was after, and it works perfectly. There is, however, one final question, if I may.
Before submitting the final command to amend the Default user permissions on every mailbox within the variable, I would like to export the values of these to a .txt file. So, I'm submitting the code below, but I don't know how to push the results out to
a .txt file (ideally without it also printing the results to the console window).
foreach ($m in $mb) { Get-MailboxFolderPermission -Identity $($m.UserPrincipalName+":\calendar") -User Default | fl }
I've tried adding the following both within the parenthesis of the foreach loop and outside of it but it doesn't work.
> C:\tmp\calendar.txt
I also tried the following.
| Add-Content C:\tmp\calendar.txt
But this did not output the same data as it does when I leave this bit out.

Default user settings template for new IDs

Hello,
I would like to set the default language in the User Master record (SU3 / SU01) to 'EN' for new IDs. It is currently blank when a new user is created. Where are the User default settings defined for Language?
Thank you,
Rob

>
Rob Butcher wrote:
> Hello,
> I would like to set the default language in the User Master record (SU3 / SU01) to 'EN' for new IDs. It is currently blank when a new user is created. Where are the User default settings defined for Language?
> Thank you,
> Rob
We did it in one of our system by creating a transaction variant that defaults to EN. We had a issue with MM/DD/YYYY though even with the transaction variant.
Actually there is a paramter zcsa/moddatfm ( Parameter for Default date format when creating users with transactions SU01 ). By default its value is 1 for DD.MM.YYYY and it has to be changed to 2 for MM/DD/YYYY.

Set Default User settings in BRF Plus

Similar Messages

Maybe you are looking for