SRM to SAP integration
Hi,
I would like to know how this SRM EBP and SAP backend are integrated. I am looking the way its linked. SRM document information is transfered to SAP by Idoc(what is the message type ?) or any other way.
I have issue like Creation shopping cart with attachment and Its not transfered to SAP.
I have checked in SRM these attachements are exists in BBP_PD transaction. Not in SAP CV03N,
Cheers....Gopi
Hello Gopi,
PO transfer from SRM to R/3 system happens thru BAPI call.
PR transfer from R3 to SRM happens thru BAPI call.
Goods Receipt and Invoice docs are transferred from SRM to R3 thru IDocs.
Best Regards.
Pavan
Similar Messages
-
Product Contract and supplier data transfer from SRM to SAP XI
Dear MDM Guru's
I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
Please help.
Regards
JacobHI Jacob,
I believe below documents will give you the information which you are looking.
[SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
[SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
[SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
Please revert if you still get any question, after going though these documents..
- Shiv -
hi,
can anyone provide me some good links,docs and blogs about SRM XI integration please.
and what would be the scenarios with SRM integrations?I mean are they like
SAP SRM -XI-R/3(or ECC)
SAP SRM -
XI----non SAP systems(i have read onb sdn SUS,EBS systems)
non SAP---XI---SAP SRM
SAP r/3(or)ECC--XI--SAP SRM?
what we need to use on SRM side (sender/Receiver)are they Idocs/RFC/proxies?and what we need to use on SAP R/3 side and thirdparty systems?
please clear me?
thank you,
babuHi Babu
SAP deliver a lot of XI contents for SRM.
For this have a look at service.sap.com/xi --> Business content --> SAP XI Content --> XI content delivered by SAP --> mySAP SRM
Also refer this realtive thread from jin shin
Re: Http server code 401 reason Unauthorized explanation Unauthorized
There are business package available for the standard SRM and XI integration. For this you can download from the service market place and you can make use of the standard SAP delivered objects.
Most of the time senario involves Idoc/RFC and Proxy here
Some of the docs from SAP service market place are-
go to https://websmp101.sap-ag.de/ibc -
>mySAP SRM-->and search
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
Cheers..
Vasu
Reward Points if found useful ** -
Activate CCMS for SAP SRM with SAP DB
Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful system_failure
Name and Server : SRM - olda8002
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : System Error
Error Message : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server : SRM - olda8002
DBMRFC Function : DBM_CONNECT
Error : Communication Error
Error Message : Error when opening an RFC connection
4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
ThomHello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
<IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
SAPDB_DBM SAP DB dbmrfc server
SAPDB_DBM_DAEMON SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
& Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
/nsm21 -> check the system errors.
/nst11 -> check the errors in the corresponding dev log of WP.
Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina -
SRM-XI-SUS Integration issue.
hi
Anyone help me in SRM-XI-SUS Integration.
My Requirement is
1) Purchase Order
2) Confirmation
3) Shipping Notification etc. from SRM to SUS Through XI.
Please it is urgent.
ThanksKalam,
Check this thread for various questions on this integration:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=srm-xi-sus%20&cat=sdn_all
---Satish -
SRM B2B - OCI integration.
Hellow Team,
We are implementing SRM B2B - OCI integration to a third party intenet order system. We are planning to use the add on component of SRM server in ECC6.0 ( integrated SRM server).
Please let me know if any body done this kind of integration using the integrated SRM server.
Any inputs and suggestions for this kind of integration will be very much appreciated.
Thanks in advance,
Best regards,
MadhuHi Rafael,
The ISA Development and extension guide talks about OCI. I've also seen a printout of some info from help.sap.com about how to use OCI but don't have a link to it unfortunately.
Thanks,
Gareth. -
Error after uninstalling the SAP Integration Kit XI 3.0 on Unix
Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, TimoThanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
<context-param>
<param-name>config.logon.service.context</param-name>
<param-value>/PlatformServices</param-value>
</context-param> -
SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end
Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan KanadeHi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan -
How to transfer Vendor from SRM to SAP R/3
Hi...
How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
regds
KumarHello Kumar,
Please find the SAP documentation:
http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
Other useful threads.
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor data transfer from SRM to R/3.
Hope this helps.
Thanks
Ashutosh -
Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
AndreaDear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice -
Business Object and SAP Integration
All,
We've BOJ Data Services XI installed.
Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
Please adivce.Hi Lynn,
If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
Link to download the useru2019s Guide:
- Please go to Http://help.sap.com
- Click on Business Objects tab
- Select the product as Integration Kit for SAP
User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
I hope that helps you.
Regards,
Prashant -
Error while installing SAP integration kit 3.1
Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advanceHi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos -
Crystal Developer XI without Sap integration kits cant see released Queries
Hi All!
When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I cant see released SAP BW Queries via SAP OLE DB access.
What's a problem here?
WBR ArtemHi,
you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
ingo -
Default language settings in SAP Integration Kit?
Hi everybody,
I've the following problem:
If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
Thank you for your helpPost your question to the Business Object Integration Kits forum
-
How to import the transports from the SAP Integration Kit into SAP system
Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank youHi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri
Maybe you are looking for
-
ECC 6.0 integration with MS Dynamics CRM 2011 on-demand thru PI
Hi Gurus, sorry in advance if some of my doubts will appear to you experts as stupid.... Scenario: we're on the way to realize the integration between SAP ECC and Microsoft Dynamics CRM Online (so...in the cloud) using SAP PI 7.11. In our scenario SA
-
Memory errors Illustrator CS2 on WinXP
When the students use the program they get these error messages: we have Illustrator installed on student workstations in a lab. We get the following error messages The operation could not complete because there isnt enough memory (RAM) available. (t
-
Error of taxes while doing MIGO
Hi Friends, I am trying to do the MIGO of an old PO having open quantities but it is giving me a message of "BED, AED and SED for the excise item is zero". I am unable to understand why this error because I did migo for the same PO last week, system
-
Hi Guys, Do we have any standard Worflow given by SAP relating to MIRO. Regards, Madhu.
-
Is Oracle starting a new product JBaker? The following shows up as a tip of the day in Jdeveloper Angel food cake An angel food cake will slice neatly without crumbling if you freeze it first, then thaw it.