SRST and reserver one license for operator

Does SRST have a feature which can reserver one for a number , for example operator? The reason being that is say the license we ordered is less than the staff. So we want the call to unregistered phone to be redirected to operator. But we have to ensure operator register first. Thanks

Another way just occurred to me:
Set up an access-list that permits traffic from only the first 24 addresses in your address range to port 2000 on the router:
e.g. your SRST router IP is 192.168.1.254:
access-list 100 permit tcp 192.168.1.0 0.0.0.15 host 192.168.1.254 eq 2000
access-list 100 permit tcp 192.168.1.16 0.0.0.7 host 192.168.1.254 eq 2000
access-list 100 deny tcp 192.168.1.0 0.0.0.255 host 192.168.1.254 eq 2000
access-list 100 permit ip any any
Syntax may be dodgy there but you get the idea...
Then reserve the operator phone an IP in DHCP that is in the range that is allowed port 2000 on the router above. Any phones reserved addresses in that range will be able to register with the router, any phones outside will not be able to.
Aaron

Similar Messages

  • Hi all - is it really possible to use one license for two computers or is it just a rumor?

    I heard that it would be possible that you can use one license for two computers. Is that the truth? And if so - how does it work?
    Thanks
    K

    Adobe CC or any perpetual previous version allows you to install & activate it two times (on the same computer or other different one).
    As per End user license agreement, only one computer can be used at one given time.
    Please refer to:
    Licenses and terms of use | Adobe
    Adobe - Adobe product license agreements
    Hope it helps you.
    Regards
    Rajshree

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • Laptop and Desktop, one license or two?

    Hello!
    In the past I've been able to use one license for an Adone CS Suite on two machines (a laptop and a desktop) that I, and only I, use for my business. I'm not sure this is possible anymore with the introduction of creative cloud, and can't seem to find the answer to this question. Does anyone know?
    I'm worried that I may now have to change all my office hardware to be only laptops (and external monitors), so that my employees and I have the mobility we need from time to time. It would be great if some light could be shed on this subject/issue. Please advise, many thanks!
    Cheers,
    David

    One Creative Cloud Individual subscription or a Seat on a Team subscription allows one user to activate the products on two computers which can be running at the same time.

  • License for Operation Manager

    Hello Team,
    We have DPM installed in our environment for backup.
    We want to implement Central Console for centralized administration. I understood that to install central console we have to install operation manager first and then install central console.
    I want to know if we need a license for operation manager to install and if yes then what could be the cost of the license?
    Regards,
    Suman Rout

    Hi,
    We have System Center 2012 DPM installed in our environment.
    If any license is not required then how do I install Central Console for centralised DPM Administration. I tried installing Central Consol but I got an error as Need to install Operation Manager first. As Central Console can only be installed on Operation
    Manager Server.
    NOTE: We do not have Operation Manager or SCOM installed in our environment.
    Could you please also let me know the steps to install.
    Regards,
    Suman Rout

  • I wish to del one apple id and make one common for mac and i phone, please suggest

    i wish to del one apple id and make one common for mac and i phone, please suggest

    You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

  • I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

    I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

    Also, downloads are for only one platform, so the answer is yes only if both computers are windows computers or both are macs. To do one each you need the boxed version.

  • Had to reinstall OS and now my "Licensing for this product has stopped working."

    Had to reinstall OS and now my "Licensing for this product has stopped working."  I have CS3

    And that OS is....? You need to tell us at least that much and explain exactly how and why or else this is not going anywhere.
    Mylenium

  • Can a friend and I share one license for Photoshop Elements 12 on separate computers?

    A friend and I want to pitch-in to get a license for Elements, but we'd like to see if we can each use it on our respective computers before we decide to buy.
    Also, if I decide that I want my license to change from my laptop (which will use the software first) to my beefier desktop, how might that work? A transfer of license or something of the sort?
    Thanks!

    No more than one user can use a single-user license Adobe product.
    End-user license agreements FAQ
    Can I use my software on two computers?
    If you own, or are the primary user of, a single-user or volume license Adobe product that is installed on a computer at work, you can also install and use the software on one secondary computer of the same platform at home or on a portable computer. However, you may not run the software simultaneously on both the primary and secondary computers.
    No more than one user can use a single-user license Adobe product.
    Note: AVL customers have to buy two different licenses to use both operating systems, even if they have two different computers. They can only use the same license on another computer (not simultaneously) with the same platform at home.
    For more information regarding Adobe's activation policy, including recent changes, see the Product Activation FAQ.

  • One license for OSX and PC?

    Is there any way that I can purchase one license (with educational discount) and use it for BOTH my Mac and PC?
    Per the licensing: when I buy a copy I can install it on two PCs OR two Macs, but not one of each, correct? I personally think this is a bit ridiculous and refuse to buy two copies.
    Looking at the volume licensing, found at http://www.adobe.com/aboutadobe/volumelicensing/policies/?PID=2159997 it says..
    Cross-platform licensing
    Adobe Volume Licensing (AVL) customers receive product serial numbers for both Windows® and Mac OS as long as the product is available for both and the two platforms are the same version. Program members can choose to use either platform, as long as the total number of licenses being used does not exceed the number purchased."
    However, does that mean that I can use it on both, as long as they aren't running at the same time, or that I must choose to install one or the other?
    I am willing to buy the volume license (though a bit more expensive), but I absolutely refuse to buy two licenses.
    Is there any solution where I don't have to buy two licenses? (according to one site I can buy backup disks for each platform with a volume license, but I don't want to do that either)

    Yes, that particular language on multi-platform is explained here, and how that should work
    I don't think you have to buy backup discs unless you personally need them, although they're only $20 apiece anyway and not a bad idea to have

  • I have an iMac and an HP laptop, can I use my one license for both?

    So I asked the other day how many computers one purchase, of the education version, would cover and Adobe told me two. Now I want to know if they will cross platforms. I am looking to ask for a new desktop for Christmas and I want a iMac, but I am worried that I won't be able to get cs5 on that and my pc laptop. So I guess my question is can one license cross platforms, and what computer should I get?
    I am partial to the user friendliness of Mac, but all my training and other programs are for pc.
    You can see my dilemma. Please help!

    Unfortunately no NobleC.  The only way to reduce the cost would be if you purchased a volume license.  But to receive a discount you would need to purchase more than two copies. 
    If you are not planning on using the Mac primarily for your creative work you could use a Windows virtual machine to run the software.  The performance would not be on par with running it on the Mac natively but should be ok for minor editting and opening documents.  The other option would be using Boot camp to boot into Windows and install our software while running Windows natively via Boot camp.

  • I only ever activated one license for cs5 mac. Stuck using PC now. Help please.

    Now I'm using a Wacom companion, and forced to operate windows on it. Isn't there something I can do or someone I can talk to in order to gain access on both operating systems?

    A CS5 mac license is only for a Mac and cannot be exchanged for a PC. One way out is to upgrade for $200 to CS6 and order a free Platform swap to PC.
    A better way is Creative Cloud Photography plan | Adobe Creative Cloud
    You get Photoshop as part of the deal and can move between PC and Mac as much as you like. $10 monthly or $120 annual. All future upgrades and versions part of the deal.

  • Buying more then one license for FCPX

    Hi,
    I'v got problem.
    I'v got 4 imac computers.
    I need to buy 4 licenses of Final Cut Pro X...
    As far i bought one license through the app store, using my apple id.
    There was no option to change number of the licenses.
    According to FCPX license, if i need to use four instances of FCPX in the same time i need licens for each of them.
    I'v got one, i need three more... on the same apple id.
    How tu buy another licenses?
    When i'm clicking on buy button on fcpx site it tells me to login. After log in it claims that i got one license and it's not allowing me to buy more.
    Any one knows how tu buy three more licenses through the app store on macos?

    this is excelent idea...
    http://store.apple.com/us_smb_78313/product/D5977Z/A
    this propably solv my problem.
    THX Carolyn Samit

  • HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

    I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
    I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
    May half and half, 1.5 tb for time machine and 1.5 tb for data.
    I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
    Any recommendation?

    As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

  • I am setting up a time machine backup to a external Hard drive.  I want to backup by Mac book Pro running OSX 10.8.5. I would like to Partition the disk and use one partition for Time machine backups and the other for my Lightroom backups. How to do this?

    I want to create a two partition disk. One partition for time machine, the other for Lightroom backup. Currently Time Machine is using the entire drive and it is doing the intial encryption and is about 29% complete after two days.  I've decided that I want to turn encryption off and partition the disk. So I do I start over?

    With the external drive attached, open Finder>Applications>Utilities>Disk Utility.  Select the external drive from the list in the left side panel of the DU window.  In the main window panel, click Partition in the buttons top center of that panel.
    Select the number of partitions you want and adjust their sizes.
    For the first partition, click to highlight the partition, then select the format, Mac OS Extended (Journaled) and then the partition table as GUID [both of those are the defaults].  Click Apply and it will ask to confirm and erase and format that partion...oh, give the partition a name, like Backup. 
    Then repeat those steps for the second partition..and remember to name it...something like Lightroom.
    Close Disk Utilitty and you are ready to send TM to the one partition, and do your backup of Lightroom to the second partition.

Maybe you are looking for

  • ALV USER COMMAND

    Hi,    I am using the following code to change the values in the output and update the database table. TYPE-POOLS : SLIS. TABLES : ZVCARE,          ZHR_VCARE. DATA: BEGIN OF IT_ZVCARE OCCURS 0,       PERNR LIKE ZVCARE-PERNR,       CYEAR LIKE ZVCARE-C

  • No sound through HDMI alternative solution

    If you are not able to get sound through your TV through HDMI and have tried all the System Preferences/Audio MIDI steps detailed on here in other threads but nothing works, try just shutting down all running apps. I had to Force Quit Spotify, Viber,

  • 16:9 footage in iDVD from FCE?!

    I have recently just bought FCEHD and have created a 5 minute movie. I used to use iMovie and think that it was definitely worth upgrading other than the steep learning curve. When I imported footage into iMovie it would recognise that my footage was

  • Displaying Employee Photo thru Web Service

    Hi, I am having a requirement of displaying the employee photo's thru weservice, in asp.net application. Is it  possible? If anybody knows.. Guide me to close this issue... Thanks & Regards, Balajee Jeyaraj .

  • HR - have to add description for the customised field in infotype 4118.

    I need to add description for the customised field in info type 4118 in HR module.