SSIS 2012 -Not Executing file from other server.
Hi Experts ,
I am working on SQL 2012
I have a SSIS Package -
1) Execute SQL Task - calling Storeprocedure
my StoreProcesdure contain OpenRowser Query which Pull Data from Excel and Load into SQL Table.
Scenario 1
On Development Server example IP: (10.11.12.13)- File is present in D\ExcelSource\ folder of dev server
1)My SP Run/execute successfuly on SSMS
2)MY SSIS package execute successfuly which contain above SP
Scenario 2
I have deployed SP and SSIS to production server
On Production server example IP: (10.11.12.100)- File is Still Present in D\ExcelSource\ folder of dev server
1) MY SP Execute successful on SSMS Picking file from '\\10.11.12.13\D\ExcelSource\' folder
2) SSIS Package Fails where SP is picking file from '\\10.11.12.13\D\ExcelSource\' folder
"exec [dbo].[spLoadexcelEMPdata]" failed with the following error: "Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
3)When I copy excel file from dev to prod server and Give prod server path ,then SSIS package execute Successfully
NOTE :
a)ACE.OLEDB 64 bit (2010 )driver is installed on prod server
b)Same SP execute successful in Prod SSMS
c) SSIS and SP execute successful in Dev server
I have even Share development server Folder with everyOne so that File in it is accessible
Also given Read Write permission to excel file and folder
WHY my SSIS package with SP FAIL when Picking file from dev server ??? where as same SP runs fine on SSMS
HOW to resolve this.... ?? Please assist
You just gave more valuable info...
exec [dbo].[spLoadexcelEMPdata] runs locally on the prod machine
Thing is, you have the 64 bit driver, so it might work from the package or SSDT/VS if you set them to 64 Bit mode
It is because the complete office is not necessary for OpenRowset.
I assume, you referenced the driver
OPENROWSET('Microsoft.ACE.OLEDB.12.0', 'Excel xyz.0;...
Arthur
MyBlog
Twitter
Similar Messages
-
Executing file on other server
Can anyone please guide how can we execute file locating on a different server.
Regards,
Shantanu R. GodboleHi,
Please can you explain how..
Regards,
Shantanu R. Godbole -
How to download a file from other server using servlet
Hi All....
Good Morning....
right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...
will u pls give me solution for this..
because it is very urgent for me...
i am very much thankful if u provide me the code samples also....
i am seeking ur help...
Regards,
sathyaright now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...If you can tell some of our approaches and the failures you faced, someone might be able to help you.
I dont think anyone will just give the code samples. -
Help with Dump files from other server.
Hello!
I'm having a problem with reading Dump files. The issue is this:
I'm working with a great number of SQL Servers installed in a big number of virtual/physical servers. The problem is that I can't analyse (neither with WinDg or Visual Studio) the .mdmp files out of the server that is having the issue.
Is there anyway that I could read the SQL Server dump files out of the server (It doesn't matter if it is in my Computer or another server)? Because it always shows an error of compatability with sqlservr.exe
Also is there any other tool that could help me to read sql server dump files?
Thank you very much :)Hello,
I would suggest you raise a case with Microsoft for accurate analysis of the dump.I would strongly recommend it .If you still want to proceed use below link
http://blogs.msdn.com/b/psssql/archive/2012/03/15/intro-to-debugging-a-memory-dump.aspx
As a fact by applying latest service pack you have chance to subside these Dumps
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Playing but not copying file from other drive?
How can I play an audio file or a video off an external hard drive connected directly to my mac or accessed over a wireless network without the file being copied to the mac that it is being played on?
Thanks.Turn off the option in iTunes to "copy files to iTunes Music folder when adding to library" in the iTunes -> Advanced -> General preferences). Then when you add the track to iTunes, it won't be copied to the internal drive.
-
MAXDB copy log file from one server to the other server.
Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.AHi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu -
Reg : Executing .exe file from application server
Dear Experts,
i have a requirement to execute an .exe file from application server,i tried with method CL_GUI_FRONTEND_SERVICES=>EXECUTE but it executes .exe file from presentation server only.can
anyone kindly clarify to execute .exe file from application server?
Thanks in advance,
SujayHi,
Did you search before posting?
Re: Execute a .exe file present in the Application Server
Vikranth -
User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2 1951845952 224463456 1726870496 12% /
devfs 360 360 0 100% /dev
map -hosts 0 0 0 100% /net
map auto_home 0 0 0 100% /home
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website
//[email protected]/website 204360384 38067872 166292512 19% /Volumes/website-1
map -fstab 0 0 0 100% /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious. -
Not able to get file from application server with read dataset
Hi,
Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ?
My code is like below...
DATA : PATH TYPE STRING.
DATA: E_FILE LIKE RLGRAP-FILENAME.
CONCATENATE '/tmp/' NAME_WITH_EXT INTO E_FILE SEPARATED BY SPACE.
CONDENSE E_FILE NO-GAPS.
IF EXTENSION = 'TXT'.
OPEN DATASET E_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH WINDOWS LINEFEED . " MESSAGE MSG.
IF SY-SUBRC <> 0.
WRITE: SY-SUBRC, MSG, ' LIKE ', C_FNAME.
ELSE.
WHILE SY-SUBRC = 0.
READ DATASET E_FILE INTO WA_C.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND WA_C TO IT_C.
ENDWHILE.
CLOSE DATASET E_FILE.
ENDIF.
ELSE.
OPEN DATASET E_FILE FOR INPUT IN BINARY MODE. " ENCODING DEFAULT. " INPUT IN BINARY MODE . " TEXT MODE ENCODING NON-UNICODE.
IF SY-SUBRC = 0.
DO .
READ DATASET E_FILE INTO GS_PDF_TAB.
IF SY-SUBRC = 0.
APPEND GS_PDF_TAB TO GT_PDF_TAB.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET E_FILE.
ENDIF.
ENDIF.
Regards,
Gurprit Bhatiadelete this line DEFAULT WITH WINDOWS LINEFEED and check this..
-
Not recognizing # while reading the file from application server
Hi
I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
Thanks,
kishoreI faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
Hope it helps,
SKJ -
I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying? -
Can not open JPEG files and can not create JPEG files from other software
Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support -
I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advanceHi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W. -
File from application server-- Email ?
Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng TYPE sodocchgi1,
it_objtxt TYPE STANDARD TABLE OF solisti1,
is_objtxt TYPE solisti1,
it_objpack TYPE STANDARD TABLE OF sopcklsti1,
is_objpack TYPE sopcklsti1,
it_objbin TYPE STANDARD TABLE OF solisti1,
is_objbin TYPE solisti1,
it_reclist TYPE STANDARD TABLE OF somlreci1,
is_reclist TYPE somlreci1,
w_lines_tx TYPE i.
** Create Message Body
** Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
* write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = w_lines_tx.
is_objpack-doc_type = 'CVS'.
is_objpack-OBJ_NAME = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = is_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack
contents_txt = it_objtxt
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?
-
Copy File from Presentation Server to Application Server in Background
Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source type string,
wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
exporting
source = wa_source
destination = wa_destination
* overwrite = SPACE
* EXCEPTIONS
* cntl_error = 1
* error_no_gui = 2
* wrong_parameter = 3
* disk_full = 4
* access_denied = 5
* file_not_found = 6
* destination_exists = 7
* unknown_error = 8
* path_not_found = 9
* disk_write_protect = 10
* drive_not_ready = 11
* not_supported_by_gui = 12
* others = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
ArbindHi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN).
Maybe you are looking for
-
How to let users run your Java application
Hello, I'm writing an application using JBuilder7 and it's wonderful designer: so far it is composed by only 2 class and imports java.awt.* and javax.swing.* (SDK 1.4) Now, I've yet to finish it but I was wondering: "how will users be able to use it?
-
How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone
-
Unable to update my PSCC to use my new canon 7DMKII Raw .
Unable to successfully update my PShop CC to use my RAW from new 7DMKII canon. Totally frustrated with lack of support.
-
I've got a new D40x and am trying to import raw images from the camera. That much SEEMS (I'm not sure the import may just be a basic JPEG) to work. But then when I go to "external editor," that is Photoshop Elements 4 to edit, it looks like what come
-
I have noticed since upgrading to the new operating system that when I select slideshow from my pictures and got to use the Oragami effect, nothing happens. I am able to view slideshow via other effects... this feature worked prior to the upgrade..