SSIS Lookup Error ......Row yielded no match during lookup.

I have a lookup which I know should bring back data but it is failing.
I get the following error:
[Lookup- Spec [1257]] Error: Row yielded no match during lookup.
Mr Shaw

Whats the caching mode used? Is it full or partial cache?
There's a difference in the way comparison is done in both mode as in one case comparison takes place in SSIS engine whereas in other case it takes place in SQLServer.
See this
http://visakhm.blogspot.in/2014/05/string-comparison-in-ssis-lookup-task.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

  • Hard drive error: Some information was unavailable during an internal lookup

    I tried upgrading my hard drive on my 13" MacBook Pro (mid-2010)  to a solid state drive.  When I did, I encountered a problem where I could not boot from my internal drive.
    It boots fine from the external drive that I used to clone my old HHD.
    When I run repair disk in disk utility I get an error:
    Problems were encountered during repair of the partition map
    Error: Some information was unavailable during an internal lookup.
    Running repair disk on the external drive returns no errors.
    My first thought was I have a bad SATA cable.  After replacing the SATA cable, I am still having the problem.
    Anyone have any ideas on what could be the problem?  SATA Connector on the motherboard failed?
    Thanks in advance.

    I formatted it a Mac OS Extended (Journaled) using the Erase function in Disk Utility then copied the contents of my HD using Restore in Disk Utility.  It seemed to copy all of the contents correctly.  It boots from the external drive.
    The problem starts when I put it in the computer and try to boot internally.  It will not boot.  Also, my old HD will also not boot internally now either.

  • Transient VO insert error-Attempting to insert row with no matching EO base

    Hi ,
    I have a transient Vo (created using option - rows populated programmatically, not based on Query) and I need to uptade/insert rows in vo on click of a button.
    when i nsert row, i get following error
    oracle.jbo.InvalidOperException: JBO-26020: Attempting to insert row with no matching EO base
    This is what I am doing in my code
    ViewObject vo2 = am.findViewObject("TransientVO1");
    vo2.executeQuery();
    if (vo2 == null) {System.out.println("vo2 is null");}
    if (vo2 != null)
    System.out.println("in vo2 != null");
    Row row2 = vo2.createRow();
    row2.setAttribute("PlatformName", "ss");
    row2.setAttribute("UserName", "ss");
    vo.insertRow(row2);
    System.out.println(" vo2.getRowCount()"+ vo2.getRowCount());
    Why is it saying no EO base... is it mandatory to have EO for transient VO? Please help.
    Thanks

    The EO handles all DML, hence you need it if you have to set attributes in a VO. An EO handles the storage of a the single row (or part if your VO consists of multiple tables).
    You can try and overwrite the setter method of the attributes in ViewRowImpl class and store the changes somewhere else.
    Timo

  • Ssis error: row disposition on "input "OLE DB Destination Input" (3876)"

    i got the following error in data flow task.
    The "input "OLE DB Destination Input" (3876)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (3876)" specifies failure
    anyone knows how to fix it?

    This error is occurring because you have a value in your source column that is not valid for your column in the destination.
    Some possible examples:
    You're trying to insert a 10 character value into an 8 character field.
    You're trying to insert a value larger than 127 into a tinyini field.
    You're trying to insert the value 6.4578 into a decimal(5,1) field.
    SSIS is governed by metadata, and it expects that you've set up your inputs and outputs properly such that the acceptable values for both are within the same range.

  • How does the Error Row Definition and Error Message Lookup setup work?

    Suppose I use web ADI to load data to PA_TRANSACTION_INTERFACE_ALL (This is Oracle standard Interface table for Projects)
    I call a Importer (The Importer is called post upload of data to above Interface Table). The Importer will update the Interface table columns (TRANSACTION_STATUS_CODE) and (TRANSACTION_REJECTION_CODE) with values based on the clearing all validations. If validation fails, the column, TRANSACTION_STATUS_CODE is updated with value 'R' and TRANSACTION_REJECTION_CODE has the error code. This error code is stored in the Lookup, with Lookup Type = 'TRANSACTION REJECTION REASON'
    I define the Error Row Definition as follows -
    select * from PA_TRANSACTION_INTERFACE_ALL where TRANSACTION_STATUS_CODE = 'R' and BATCH_NAME = $param$.batchname (BATCH_NAME is populated in the Web ADI Template)
    I define the Error Message Lookup as -
    select meaning from apps.fnd_lookup_values where lookup_type ='TRANSACTION REJECTION REASON'
    and language='US' and lookup_code = $param$.TRANSACTION_REJECTION_CODE
    I have defined the , Document Row : Interface Attribute Mapping - with the column, ORIG_TRANSACTION_REFERENCE (THe column with the Unique value for a row and links the Excel row with the Interface table)
    I feel my setups are fine. Still why the Error -
    An error has occurred while running an API import. The ERRORED_ROWS step 275:ER_501996, parameter number 1 must contain the value BIND in attribute 1.

    Duplicate post -- https://community.oracle.com/thread/2615675

  • How to avoid primary key insert error and pipe those would-be error rows to a separate table?

    Hi All,
    Question: How can I ID duplicate values in a particular column before generating a "Violation of PRIMARY KEY constraint" error?
    Background: this SSIS package pulls rows from a remote server table for an insert to a local table.  The local table is truncated in step 1 of this package.  One of the source columns, "ProductName," is a varchar(50) NOT NULL, with no
    constraints at all.  In the destination table, that column has a primary key constraint.  Even so, we don't expect duplicate primary key inserts due to the source data query.  Nevertheless, I've been
    tasked with identifying any duplicate ProductName values that may try to get inserted, piping them all to a "DuplicateInsertAttempt_ProductName" table, and sending an email to the interested parties.  Since I have no way of knowing which row
    should be imported and which should not, I assume the best method is to pipe all rows with a duplicate ProductName out so somebody else can determine which is right and which is wrong, at which point we'll need to improve the query of the source table.
    What's the proper way to do this?  I assume the "DuplicateInsertAttempt_ProductName" table needs identical schema to the import target table, but without any constraints.  I also assume I must ID the duplicate values before attempting
    the import so that no error is generated, but I'm not sure how to do this.
    Any help would be greatly appreciated.
    Thanks,
    Eric

    agree about preventing a dupe or other error on some inconsequential dimension from killing a data mart load that takes a few hrs to run and is an important reporting system.
    I looked into using the error output before, but i think it came up a bit short...
    This is going from memory from a few years ago, but the columnid that comes out of the error data flow is an internal id for the column in the buffer that can't be easily used to get the column name.
    No 'in flight'/in-process way exists to get the column name via something like thisbuffer.column[columnid].name unfortunately
    In theory, the only way to get the column name was to initialise another version of the package (via loading the .dtsx xml) using the SMO .net libraries. I say in theory because I stopped considering it an option at that point
    And the error code is fairly generic as well if i remember correctly. It's not the error that comes out of the db (Violation of UNIQUE KEY constraint 'x'. Cannot insert duplicate key in object 'dbo.y'. The duplicate key value is (y).)  It's a generic
    'insert failed'/'a constraint failed' type msg.
    I usually leave the default ssis logging to handle all errors (and log them in the sysssislog table), and then I explicitly handle specific exceptions like dupes that I don't want to fail package/parent on error
    Jakub @ Adelaide, Australia Blog

  • ImportTextData fails with an error: row not found

    In am using Acrobat XI.  In a js script in an action wizard the statement this.importTextData("mypath", 0) continues to return a 3 "error: row not found".  I have checked the path and it is correct.  The text file was created by Access 2013 and is tab delimitated.  What am I doing wrong?  The top row in the txt file is the column names and there are 3 rows of data. 

    What happens when you try to import from the data file manually?
    If you have a field named "A.0" as you said, you have to have a matching column header, but you said you just have "A", "B", and "C".

  • JBO-26020: Attempting to insert row with no matching EO base

    Hi All,
    I have a bit of a problem here. The following is some background information. Please help if possible.
    Aim: I have a custom application whereby I need to add the sequence value (assuming the sequence.nextval is already taken and stored into a variable/original table) to my custom table.
    Procedures taken: I have found the EO which gets the sequence value for the original application and the VO that gets the EO. I have added both EO and VO to my project and tried to add the VO to my custom AM. In my custom AM I have added the following code to initialize the create function of the standard EO:
    **********CODE******************
    OAViewObject vo3 = (OAViewObject)getRegRequestsVO1();
    if (!vo3.isPreparedForExecution())
    vo3.executeQuery();
    Row row = vo.createRow();
    vo3.insertRow(row);
    row3.setNewRowState(Row.STATUS_INITIALIZED);
    Problem: However when I use the code vo3.insertRow(row); it prompts me with the applicaiton error of JBO-26020: Attempting to insert row with no matching EO base. I don't quite understand what I am doing wrong.
    Can anyone please help.
    Cheers

    This i have find out .
    FYI...
    JBO-26020: InvalidOperException
    Cause: The application code tried to take a row from one row set (or view object) and insert it into another row set (view object). In response, the framework will make a "copy" of the row in the new row set. This new row will share references to the underlying entity objects. However, if the source and destination row sets do not share any entity object bases at all, this operation will fail as it does not find any entity rows to share.
    Action: When attempting to take a row from one row set and insert into another, make sure that they share at least one entity object base.
    Thanks

  • How to get Validation Error rows?

    Hello!
    I have a file for multiload with 4 rows. 2 of the rows has wrong mapping. When I do the multiload process, on Validation step I am getting error message. If we click on it, on the right side of the screen, in "Processing detail" windows error row will appear. (look in pic)
    http://imageshack.us/photo/my-images/690/65843820.jpg/
    My task was to develope a web script, which automates Multiload process. This script is now assigned to the Task button in Web client. In this script for Validate step i wrote code:
    Call PobjMultiEng.PobjMultiLoader.fMultiValidate(PobjMultiEng.PobjMultiLoader.PcolLoadSet, True)
    +     If PobjMultCiEng.PobjMultiLoader.objAPI.ValidationMgr.Perr <> 0 Then      +
    +     On Error GoTo 0+
    +     Err.raise 1+
    +     Exit Sub+
    End If
    I want to add here function, in which file with errors rows will be created and send to User (Now, if there was an error during multiload process, user gets only notification about the error without details).
    My quastion is: where can i get the information (File name, Data Source, Source Value, Description - like in the picture) about wrong mapping rows?
    I found, that there is clsValidationMgr object, that has useful methiods:
    PrsDimErr ( Variant ) Variant containing mapping errors for last dimension validation call to
    +"fValidate" (See enmMarshalTypes)+
    PErr ( Long ) Contains COUNT of errors for last dimension validation call to "fValidate"
    PMsg ( String ) Contains MESSAGE from last dimension validation call to "fValidate"
    But i didn't find what i need there.
    Regis

    Hi,
    Try this one :
    SELECT id_emp,
           max(id_est) keep (dense_rank last order by dt_est) id_est,
           max(dt_est) dt_est
    FROM <your_table_here>
    GROUP BY id_emp;

  • SSIS 2012 error column name - SSISDB

    I need to get the column name for the error rows in a Data Flow Task.  I have looked at this:
    bennyaustin.wordpress.com/2011/02/04/ssis-name-of-errorcolumn/
    which requires this: dfld.codeplex com
    which requires "Fully qualified path of SSIS Package in File System.".
    Our packages aren't deployed to the file system. They are deployed to the Integration Services Catalog/SSISDB.
    What is the recommended method for retrieving the column name when a row is redirected due to an error?
    Thanks for your help,
    Suzanne

    Hi Suzanne,
    To get the column name based on the Lineage ID of the error column, we need to use the
    FindColumnByLineageID method in a Script Component or create a Custom Component.
    Now that the solution described in the blog you mentioned uses a third-party Custom Component, you can also refer to the following blog which provides the code to build such a Custom Component:
    http://naseermuhammed.wordpress.com/tips-tricks/getting-error-column-name-in-ssis/ 
    The demo in this blog is for SSIS 2012.
    Regards,
    Mike Yin
    TechNet Community Support

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • Job Cancelled with an error "Data does not match the job def: Job terminat"

    Dear Friends,
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job   Started                                                                               
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)                           
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.                                   
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.                                    
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)  
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)    
    8.Job cancelled after system exception
    ERROR_MESSAGE                                                
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised. 
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?
    Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

    Dear Friends,
    _Urgent : Please work on this ASAP _
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job Started
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
    8.Job cancelled after system exception
    ERROR_MESSAGE
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?

  • Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

    Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

    Try following the instructions here: [[Firefox hangs]]

  • Oracle ODBC  - Internal Error - unable to initialize NLS during driver load

    I'm having some trouble with my ODBC connections which I hope someone can please help me with!
    About 6 weeks ago all was working as normal.
    As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
    Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
    unable to connect SQLState=IM004 SQL_HANDLE_ENV
    error. ODBC also kept crashing.
    I restarted the computer and was confronted with a different error:
    odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
    I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
    I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
    Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
    I looked in the registry at:
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
    and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
    (Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
    Since I made those changes I can no longer connect through Access.
    I just receive a ODBC - connection to 'xxx' failed
    Advice greatly appreciated!!!!
    Edited by: user11150264 on Aug 25, 2009 10:21 PM

    Actually it sort of does...
    I switched the ODBC connection to use instant client and now it's all working again.
    The biggest mystery is what changed to make it suddenly stop working the old way...

  • ORA-01403: no data found Error in PLSQL code raised during plug-in processing.

    Hello OTN community,
    We are having the access to APEX problem. a New user was setup to access the APEX application. When I test to login as a new user, I get the message "ORA-01403: no data found Error in PLSQL code raised during plug-in processing.". When click OK to the disply message, the application will take me out of the sstem. I need help to even understand what is happening. I didn't develop the application, there is no documentation for this application, I am just supporting the application whenever there is a problem and I am new to APEX. As you can see I need help to figure this thing out. Your help is dearly appreciated.
    Thank you OTN

    Try to check the query that is executed and check if there is data or not

Maybe you are looking for