Which table space need to be increased

Hi ,
If we have to upload heavy loads are there specific table spaces which need to be increased.
I can recollect only PSA table spaces , Appreciate if you can add your views.
Regards
Rahul Bindroo

Hi All,
I have doubt about the table spaces. Say we have table spaces for PSA and cubes and other objects.
Say there is a system where we are not loading data in DSO's so will there be any impact on table space for DSO. Do we need to extend that space as well if we are only loading in Cubes.
Appreciate your replies.
Regards
Rahul Bindroo

Similar Messages

Table space need to be increased in every week..

Dear Experts,
We are facing a new problem .
The problem is like , Last 6 months back we had done the Hard-ware migration. After
migration we need to increase the table space in every 10 days. But before migration , the table
space was getting ing increased in every 45 days.
In this way , we dont have much space left with us..
I am not able to analyse the issue ...
Please suggest .. What to check and necessary action ...
Thanks,
Sanjana

Hi,
Thank you for the response. Yes , the hord-ware migration is not linked with this issue. But this is happening after migration . So I was thinking , if any setting might have changed or something like that .
Deleting all the redundant data in system means , it should run regaularly. And Now new developments have gone to production.
And the data loads are carrying almost same amount of data. Only 2 changes, Material Master was coming on DELTA , Now its Coming on FULL Load. Rest all loads are same as before migration.
Kindly suggest.
Thanks,
Sanjana

Increase Table Space

Hello Guys.
I need to know to which table space I need to add space if I want to make a copy of a cube that aprox. stores 33 GB of data.
My infocube refers to the following table spaces:
PSAPDIMI
PSAPBTABD
PSAPFACTD
PSAPFACTI
My question is, I have to increase 33 GB of storage in each table space ??, or how can I determine what table space is going to require more space.
And I also need to pass data to an ODS, so I imagine I need to increase tables:
PSAPODSD
PSAPODSI
But how many GB do i have to increase in each table space to ensure a successful load of data from the original cube to the ODS ???.
Thanks in advance.

Guillermo,
It would be better to analyze the same in this fashion:
Tables in the Cube - Fact / Dimension etc
The the size for the same ( maybe through DB02 / DB02old ) and find the tablespace in which this resides and accordingly increase the space.
Also you would need a lot of archive log space - usually depending on the log generation - Archive logs can be upto 10 times the amount of data being loaded...
Also budget for the space for the DSO - it will be less that the compressed cube but still not less by a very big margin....
Arun

To increase table space

Hi all,
I am new to unix solaris,
I have solaris10 64bit os, oracle 10.2.0.4,netweaver 7.0
Now i want to work with BRTOOLS in unix, i want to increase table space.
how to extend table space in solaris environment, what are the commands to do that and what are the steps to do that?
Thanks in advance,
prathap g
9940180084

Hello Prathap,
if you are unfamiliar with database administration for SAP systems,
then start reading the documentation about the BR*Tools:
[Getting Started with BR*Tools|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/0c/cd271365debc42bef96ac7fd907787/frameset.htm]
For a start, you can call BR*tools on OS-level:
brtools -u /
2 (Space Management)
1 (Extend tablespace)
It is a good idea to post your question in the "SAP on Oracle"
forum. BR*Tools are the same on Unix and Windows, so there
is no need to also crosspost on "SAP on Unix" forum. The
operating system doesn't matter.
Regards,
Mark

I need to know in which table the long text is stored

Using the transaction code 'AC03' , I go to the ' Create Service Master Page '. Navigating through the page , I could see a ' long text ' button . Once it is being clicked , the white space for text entry comes .
My query is this -> I need to know in which table the long text is stored and the name of the field ??
If one goes to the table 'ASMDT' , one can find a field 'KZLTX' , which is a long text indicator, but not a long text storage field ...... plz help

Hi
Use the function module READ_TEXT for fetching the long text..
I came across similar situation in my project where i need to fetch the long text for Notification no.I have used the following code for fetching the Notificatin long text,you can just compare this logic and change accordingly.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = 'LTXT'
 LANGUAGE = WA_STRUCT12-KZMLA
 NAME = QMNUM
 OBJECT = 'QMEL'
 TABLES
 LINES = INT_TAB13.
Specify LANGUAGE if you wanna fetch the long text regardless of the log on lang.The resulting long text will be stored in the itab INT_TAB13 which can be defined with reference to the structure TLINE.
Hope this helps.
Regards,
Hakim

When do i need to create table spaces ?

hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ?
thanks

newbi_egy wrote:
hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ? In oracle database, the concept of storage segregation is done by two ways, using the schema and using the tablespace. So assume that you have two applications . One is used for HR related work and another is used for Finance and both kind of data is stored in one single database only. So how would you maintain such requirement? There are two ways to do it. One, you make two different schemas for each of the application and call them, for example HR schema and Fin schema. Now, you can create objects related to each of the application in it's own schema and store it in may be a single tablespace, Users. But this is going to be a little problematic like what would happen if you have lost the data file of that tablespace? You would be losing the data related to both the applications. So the better option would be to use two different tablespaces and store the data related to each application in both of them.
Understand that tablespace is a logical structure only. The only thing that's physical is going to be those data files which are stored under the tablespace. So if you are just running out of space in a data file of a tablespace, you do not need to create another tablespace. Take it like this that if you are running out of space for your family in the house, you can either make a new house for them or you can even build a new floor for them. Which one would be easier to manage, the new floor since a lot of ground work is already done for you. And that's what is the case if you have run out of the space in the data file. For this,you can simply create a new datafile(building a new floor) or even extend the existing one(construct a new room in the same floor, if you have space) . But creating a new tablespace won't be something that you should be doing for the reason of space being exhausted IMO.
Aman....

How do i increase the table space in BI...

How do i increase the table space in BI. Its giving me short dumps when i am logging into the system. So, i need to increase the Table space. Can you all please tell me the steps for increasing it.
Thank You.

hi irfan,
I too faced the similar problem error showing was table space problem its some database issue sue to this issue i was not able to run any loads or do any operations on by BI side then my on site team contacted the oracle guys to solve this.......
ravi

I need below fields at my selection screen.From which table we can find the

Sales Org > only one selection field
Division > only one selection field
Channel > from u2013 to fields
Sales Office Channel > from u2013 to fields
Sales Rep Channel > from u2013 to fields
User ID of the CSR Channel > from u2013 to fields
Customer Channel > from u2013 to fields
Material Channel > from u2013 to fields
Date: Channel > from u2013 to fields
I need these fields at my selection screen.From which tables I find these things.I need this logic also.

I need help

Need to find the text of the fields and in which table it stores IN   (Pm)

Hi ,
        Just could any buddy let me know the field CALL_STATUS in transaction IP03 get stored .
just help me out to fine the table where that gets stored .
For refference u can fine the field in transaction IP03 In strip schedule call item
field lable name : Date Type Status
Thanks ,
Vinay

Hi,
Directly if u want to get value of call_status from table, u need to combine many tables, instead u can use any call function which will return the status.
example:
CALL FUNCTION 'STATUS_TEXT_EDIT'
          EXPORTING
            client           = sy-mandt
            flg_user_stat    = 'X'
            objnr            = wa_orderno-objnr
            spras            = sy-langu
          IMPORTING
            user_line        = v_status
          EXCEPTIONS
            object_not_found = 1
            OTHERS           = 2.

Unable to increase table space

Hi,
i am getting this error on sap apoo 3.1 ides sytem
ORA-001653 Unable to increase table space PSAPEL46DD #
Can any one tell me who do i increase the tables space step by step
Thanks
Priya

Hi,
You can do it in couple of ways,ie either with sapdba or brtools.
execute sapdba or brtools and follow the menu options(its quite straight forward)
or you can do it through sqlplus with the command
ALTER TABLESPACE PSAPEL46DD ADD DATAFILE '/path of the file ' size xxxM;
Regards,
Cherry

I am hiving some table field descriptions I need in which table these table

I am having table field descriptions : Order Value,Discount Value,Actual Margin,Actual Margin %.
I need in which tables these fields are available.

Hi Bunny:
1. goto se15
2. expand abap dictionary
3. expand fields
4. double click on table fields
5. Just paste the description , which you are having in the SHORT DESCRIPTION input area, at the beside screen..like "Order value"
6. press F8.
you should get:
Table Name       Short Description
Table field                    Short Description
TREC_FORC_COMPL Temporary data for the receiving forecast
TVALUE                         Order value in document currency
EMBK             Legal Control: License Master - Header Data
GAUFW                          Value consumed by orders
Thanks,
Naveen.I

Steps to Increase / adding New Table Space using BR TOOLS

Hi
Can Anyone Tell me the Step by Step Process for Increasing / Adding New Table Space using BRTOOLS.
Any Demos/Blogs will be appreciated.
Thanks in Advance.
Rg
Dan

Hi Dan,
Adding a datafile using BRTOOLS
1) su ora<sid>
2) start brtools
3) Select option 2 -- Space management
4) Select option 1 -- Extend tablespace
5) Select option 3 --Tablespace name (specify tablespace name) and say continue(c- cont)
6) Select option 3 New data file to be added and return
7) Select option 5 -- Size of the new file in MB (specify the size of the file) and say continue
regards,
kanthi

Padded zeros which is removed need to be replaced by spaces

Hi Friends,
My requirement in XI is : Padded zeros which is removed need to be replaced by spaces.
for removing padded zeros I used the UDF:
int i = Integer.parseInt(a);
return (Integer.toString(i));
It is working fine.
Please help as how to go abt in coding : whatever zeros get taken off , need to be replaced with spaces.
Thanks in Advance,
Meghna.

Hi Raj,
According to the logic given by Henrique, its working. But the point to the noted is that :
The number of spaces need to be equal to the number of zeros removed, where it not happening in this case.for the below Ex when applied it returned ' 12345' instead of ' 12345'.
For ex. source field is '000012345' then the target field need to be ' 12345'.
the Type declared in the data type for the receiver field is integer with length 15.
Is it possible to move the field value to the right justified, so the the padded zeros code when applied will automatically load spaces.Becoz the code written for removing zeros contains String due to which it is left justified i think.
The code written for removing zeros is :
int i = Integer.parseInt(a);
return (Integer.toString(i));
please suggest in this regard.
Regards,
Meghna.
Edited by: meghna swaraj on Feb 27, 2008 6:05 PM

Which tables and field I need?

Hi all,
I am new to BW. Can someone tell me which tables and fields I need if I load data (sales report;t code:MCTG; s001)from R3 to BW. Which extractor do I need in LBWE or SWIB?
I may need to answer as soon as possible. Any hlep will be appreciate. Thank you.
Koala

Hi Koala,
LBWE is a tcode for Logistics Cockpit extraction. It's a direct code. You can find it also in tcode SBIW expanding nodes.
Knowing the fields that show up in your report you can compare them with queries, cubes, infosources and datasources in a business content.
Just make a little research:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
Best regards,
Eugene

How to increase table space?

how can you increase table space ?( using BR* tools) but whats the procedure/way ?

Hi,
execute command brspace f tsextend and supply tablespace name
u will have 2 options one to increase size and other add datafile
Connect to dataabse
issue
sql> alter tablespace <name> add datafile <'path'> size <2000m>;
to resize
sql>alter dataabse datafile <'path'> resize 2000m;
or ref
http://help.sap.com/saphelp_erp2005/helpdata/en/38/9f3fed3c32a74da3367d5f18dafb14/frameset.htm
regards
Vinod

Which table space need to be increased

Similar Messages

Maybe you are looking for