SSL cert error on exchange 2013.

Hi,
Can I please have some help to avoid the following two error messages appears on opening outlook 2013 on windows 7 connected directly to the server 2012 domain.
Godaddy SSL cert is installed on mail.domain.com and firewall forwarding is properly setup.
There is NO error message if we connect through outlook (AnyWhere) on a system which is not part of the domain and connecting from outside.
Error Box 1
Security Alert
servername.localdomain.local
Information you exchange with this site cannot be viewed or changed...................
The security certificate is from a trusted certifying authority.
The security certificate date us valid
X The name on the security certificate is invalid or does not match the name of the site....
Error box 2
Microsoft Outlook
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site servername.localdomain.local
Outlook is unable to connect to the proxy server. (Error Code 10)
Any quick help will be highly appreciated!
Many thanks

Hi,
Are you using a Single domain cert by GoDaddy, if thats the case we cannot add more than one domain to your cert. I believe you have added the outlook anywhere domain name to your cert since your outlook anywhere connection is prompting any errors.
You have two options, one is purchase a UCC Cert and add all URL's required or Please have a look on these below Virtual Directories on the exchange server and modify the the URL's so you will not get the Cert errors.
use the shell to view the internal and external URL's,
Get-ActiveSyncVirtualDirectory | fl internalurl,externalurl
Get-AutoDiscoverVirtualDirectory | fl internalurl,externalurl
Get-ECPVirtualDirectory | fl internalurl,externalurl
Get-OabVirtualDirectory | fl internalurl,externalurl
Get-WebServicesVirtualDirectory | fl internalurl,externalurl
Change all your internal URL's similar to the external URL's, use the Set command as the example below.
Get-AutodiscoverVirtualDirectory -server EXCHANGE | Set-AutodiscoverVirtualDirectory -ExternalUrl ‘https://mail.domain.com/Autodiscover/Autodiscover.xml’
make sure all your servername.localdomain.local URL's are changed to match primary certificate name.
Regards
Boniface

Similar Messages

Certificate errors with Exchange 2013 and Outlook 2013

Hello, I wonder if someone could help.
I've recently set up a network with one Windows 2012 domain controller and one windows 2012 server running Exchange 2013.
Clients run Outlook 2013 and are all one the same Lan. Outlook's setup wizard finds the exchange server automatically and sets up the profile. However if I choose the manual setup and enter the server
name and user name it does not find the server.
When I check the server name in Outlook it shows as
[email protected] rather than the real name of the server: AYCEX01.AYC.local.
When Outlook is opened there is a certificate error saying "The name on the security certificate is invalid or does not match the name of the site." and another error saying "There is
a problem with the server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.ardfernyacht.co.uk. Outlook is unable to connect to the proxy server. (Error code 10)
The external address by which users connect to OWA and active sych is mail.ardfernyacht.co.uk. The
certificate which is used is one automatically generated by Exchange.
Any suggestions you may have would be appreciated.
Many thanks,
Ruaridh
Ruaridh Mackintosh

Self sign cert wont work With autodiscover.For that you need 3rd part or from Your own CA.
Please follow this guide to install CA in Your domain:
http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Please follow this guide to request New cert in Exchange 2013:
http://exchangeserverpro.com/create-ssl-certificate-request-exchange-2013/
Your cert must contain external hostname of Your mail.domain.com
Also configure Your Virtual directories to contain internal and external hostname:
http://blogs.msdn.com/b/mvpawardprogram/archive/2013/03/18/virtual-directories-exchange-2013.aspx
Regarding servername when using autodiscover,it should automatically resolve mailbox guid instead of servername.
Please check if Your DNS is setup With autodiscover.domain.local (which is pointed to Your Exchange server)
Hope this helps!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

GetObject/SetObject Errors in Exchange 2013

Hi All,I've just completed migrating exchange to exchange 2013 on server 2012 r2. However whenever we now use the ECP or connect to users mailbox to say set an out of office message because they forgot to before leaving via OWA, we get the following errors:The server method 'GetObject' failed. or The server method 'SetObject' failed.I've done some research on the subject and the answers all point to SSL certificate issues.We only have the one certificate which we purchased bound to the default website and the exchange backend site in IIS.This is how the bindings are configured in IIS for the Default Website:Exchange Back End Site:Our 3rd party SSL certificate which we purchased is attached to both https entries for the Default Web Site, as well as the https entry on the Exchange Back End site.Is this correct?
Also should there be 2...
This topic first appeared in the Spiceworks Community

Hi All,I've just completed migrating exchange to exchange 2013 on server 2012 r2. However whenever we now use the ECP or connect to users mailbox to say set an out of office message because they forgot to before leaving, we get the following errors:The server method 'GetObject' failed. or The server method 'SetObject' failed.I've done some research on the subject and the answers all point to SSL certificate issues.We only have the one certificate which we purchased bound to the default website and the exchange backend site in IIS.This is how the bindings are configured in IIS for the Default Website:Exchange Back End Site:Our 3rd party SSL certificate which we purchased is attached to both https entries for the Default Web Site, as well as the https entry on the Exchange Back End site.Is this correct?
Also should there be 2 entries for...

Installation Error Installing Exchange 2013 CU3 on Server 2012

Hello,
When Installing Exchange 2013 on server 2012 I get the following error during Step 1 of 8 of Transport Service. I have installed and unistalled Exchange a few times, restarted the machine manually and removed exchange from AD, etc. to no avail.
Any suggestions will be very much appreciated.
Thank You.
VK
Error:
The following error was generated when "$error.Clear();
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASDat.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASDat.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
        " was run: "Installing product C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASDat.MSI failed. This action is only valid for products that are currently installed. Error
code is 1605.".

Martina,
Thank you for your response. KB says that Machinepolicy and Userpolicy are to be set to Undefined and that is what I have.
Windows PowerShell
Copyright (C) 2013 Microsoft Corporation. All rights reserved.
PS C:\Users\Administrator> get-executionpolicy –list
Scope
ExecutionPolicy
MachinePolicy
Undefined
UserPolicy
Undefined
Process
Undefined
CurrentUser
Undefined
LocalMachine
RemoteSigned
VK

Error During Exchange 2013 Mailbox Transport Role Install On Server 2012

I was installing Exchange 2013 on Server 2012. The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin. There has never been an Exchange instance on this domain. I got past
the prerequisite checks, and the installer showed 15 steps, so I walked away. When I came back, I saw this:
Step 8 of 15: Mailbox role: Transport service
Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;
          while($currTime -le $timeout)
            $setSharedCDCErrors = @();
            try
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
              if($successfullySetConfigDC)
                break;
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            catch
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          if( -not $successfullySetConfigDC)
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "Unable to set shared config DC.".
The only option on the screen was exit, so I did. I checked the start menu, and there were two new Exchange icons, but I did not click them. I ran the installer again, and it detected an incomplete install, the only option was to click next to
finish the install, so I clicked next. This time, I eventually got the same error, except the screen showed "Step 8 of 15: Mailbox role: Transport service." I did install some Exchange 2010 prerquisites on the server before Exchange Server 2013
came out, and I can rebuild the server and try the install again if that would be best, but I thought I should post here first and try to work through this since the product is so fresh. Any suggestions?

I've tried three times since my last post, following
http://msexchange2010.info/archives/2330 as closely as possible the most recent time. I am consistently getting the same error that appears to imply I don't have write access to the domain. I don't understand this, because I am using the
same domain admin account I have been using all along. Nonetheless, here is the powershell output starting with the first Exchange setup.exe step (all other steps were already performed, all available updates were installed, and the server was rebooted
prior to this):
Windows PowerShell
Copyright (C) 2012 Microsoft Corporation. All rights reserved.
PS (domain admin home)> D:
PS D:\> .\Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /PrepareAD /OrganizationName:PRD-INC /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
aspx
Configuring Microsoft Exchange Server
Organization Preparation COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /Mode:Install /Roles:ClientAccess, Mailbox, ManagementTools /t E:\Exchange /IAcceptExchangeServe
rLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Management tools
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Preparing Setup COMPLETED
Stopping Services COMPLETED
Copying Exchange Files COMPLETED
Language Files COMPLETED
Restoring Services COMPLETED
Language Configuration COMPLETED
Exchange Management Tools COMPLETED
Mailbox role: Transport service COMPLETED
Mailbox role: Client Access service COMPLETED
Mailbox role: Unified Messaging service COMPLETED
Mailbox role: Mailbox service FAILED
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
PS D:\>
I am cleaning out in ADSI and rebuilding the server for now, because the server is behaving oddly (not as oddly as it was with 6GiB, but oddly, nonetheless). I probably won't try to install Exchange again before tomorrow. What should I do to prevent
encountering the above again and/or if I encounter it again?

HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL

Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326

See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK

Perflib and MSExchange Common Error on Exchange 2013

Hello,
I am getting two error messages (in attachment) again and again on two newly installed Exchange 2013 SP1 servers with combined Exchange roles. I found a lot but could not find and solution. Please guide how to resolve the issue;
Thanks in advance.
Regards,

Hi,
For the first error, please try the following steps to check this issue.
1. Write down the name that is mentioned as [module] in your Event ID 1023 message.
2. Click Start, click Run and type Regedit [enter] (If you do not have a run option just hit the Windows key + R)
3. In the Registry browse to the key:
HKLM\SYSTEM\CurrentControlSet\Services\ServiceName\Performance
Where ServiceName references to the [module] name you wrote down in step 1.
4. Under the Performance branch check the entry that says “Library”.
5. Check if the file exits in the folder that is referenced in the registry Library entry.
6. Search the computer for that filename to see if it exists on other locations.
7. Compare file size and versions of the files that are found. If the DLL from step 5 is older/lower version then the ones in other folders you might want to rename this DLL and copy a newer one to the folder.
If you are unable to find the DLL anywhere else on the computer check the original media (CD/DVD) you installed the product from to see if the DLL exist on there. Copy or extract it to the folder where the Perflib expects it.
Then start a Command prompt and type:
REGSVR32 [path][file.dll] – where path and file.dll refer to the complete path and filename of the file you just copied.
And refer to this document
https://technet.microsoft.com/en-us/library/cc727009%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Setup Error Reinstallin Exchange 2013

Trying to reinstalling Exchange 2013 after removing Exchange from ADSI, IIS, Registry, and Active Directory. Receiving the following error when attempting AD Prep. ERROR: Method Not found: Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String,
Int32, Boolean)'. and the setup fails. This occurs whether I try Schema Prep, ADPrep or just trying to load Exchange. This is a lab environment. Any suggestions to correct the install?

When I look at the Schema with ADSI edit, I still see all the ms-exch attributes from the initial Schema Prep that was conducted. Both the Schema Prep and AD Prep was conducted successfully, but when Exchange 2013 SP1 combined was loaded, OWA never worked
right and I was having issues connecting properly with SP 2013. I did use a similar blog about uninstalling Exchange, that went into more depth that the one you listed. Here is a copy of my Exch Setup Logs when I attempt to run Prepare AD:
[04/23/2015 20:10:12.0108] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/23/2015 20:10:12.0108] [0] **********************************************
[04/23/2015 20:10:12.0108] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[04/23/2015 20:10:12.0108] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/23/2015 20:10:12.0108] [0] Setup version: 15.0.847.32.
[04/23/2015 20:10:12.0124] [0] Logged on user: TSYSDEV\MConnelly.
[04/23/2015 20:10:12.0140] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='preparead', Value=''.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='organizationname', Value='ExchangeDev'.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='iacceptexchangeserverlicenseterms', Value=''.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='domaincontroller', Value='tsysdevdc2.tsysdev.net'.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='sourcedir', Value='E:\Source'.
[04/23/2015 20:10:12.0390] [0] RuntimeAssembly was started with the following command: '/PrepareAD /OrganizationName:ExchangeDev /IAcceptExchangeServerLicenseTerms /domaincontroller:tsysdevdc2.tsysdev.net /sourcedir:E:\Source'.
[04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\v8.0, wasn't found.
[04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14, wasn't found.
[04/23/2015 20:10:12.0421] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:12.0421] [0] Copying Files...
[04/23/2015 20:10:12.0437] [0] Starting copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
[04/23/2015 20:10:18.0484] [0] Finished copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
[04/23/2015 20:10:18.0499] [0] File copy complete. Setup will now collect additional information needed for installation.
[04/23/2015 20:10:18.0499] [0] Assembly dll file location is C:\Windows\Temp\ExchangeSetup\Microsoft.Exchange.Setup.Console.dll
[04/23/2015 20:10:22.0593] [0] Setup is choosing the domain controller to use
[04/23/2015 20:10:22.0687] [0] We have a user-specified or previously-chosen domain controller: tsysdevdc2.tsysdev.net
[04/23/2015 20:10:22.0734] [0] [ERROR] Exception has been thrown by the target of an invocation.
[04/23/2015 20:10:22.0734] [0] [ERROR] Method not found: 'Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String, Int32, Boolean)'.
[04/23/2015 20:10:22.0734] [0] CurrentResult SetupLauncherHelper.loadassembly:444: 1
[04/23/2015 20:10:22.0749] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[04/23/2015 20:10:22.0749] [0] CurrentResult main.run:235: 1
[04/23/2015 20:10:22.0749] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:22.0749] [0] CurrentResult setupbase.maincore:396: 1
[04/23/2015 20:10:22.0749] [0] End of Setup
Checked the registry and the keys it is looking for are not there, but no sure if I need to manually create them. Any assistance would be created appreciated or if I need to conduct the back-out plan, I can try that.

Outlook save/update error with Exchange 2013 public folder used as Contact Items

Hello Everybody.
This problem is driving me crazy.
In Exchange 2013 i have created a public folder with several subfolders used as Contact Items.
I've reviewed all settings several times and all is ok.
Outlook 2010/2013 users several times receive the message:
"The item cannot be saved to this folder. The folder was deleted or moved, or you do not have permission. Do you want to save a copy of it in the default folder for the item?"
when try save an existing contact after modification.
I can assure you that user permissions, server configurations are ok; please, help me.

Did you make the subfolder the correct type, i.e., a contacts-type folder?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Error Installing Exchange 2013 CU6

setup startup give me this error
Method 'get_MultifactorRegistrationEnabled' in type 'Microsoft.Exchange.Data.Directory.SystemConfiguration.PushNotificationApp' from assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does
not have an implementation.
Have you any suggestion to solve it?

Here the result!
Display Name Name Install State
[X] Active Directory Domain Services AD-Domain-Services Installed
[X] Application Server Application-Server Installed
[X] .NET Framework 4.5 AS-NET-Framework Installed
[X] Windows Process Activation Service Support AS-WAS-Support Installed
[X] HTTP Activation AS-HTTP-Activation Installed
[X] DHCP Server DHCP Installed
[X] DNS Server DNS Installed
[X] Fax Server Fax Installed
[X] File And Storage Services FileAndStorage-Services Installed
[X] File and iSCSI Services File-Services Installed
[X] File Server FS-FileServer Installed
[X] Storage Services Storage-Services Installed
[X] Print and Document Services Print-Services Installed
[X] Print Server Print-Server Installed
[X] Internet Printing Print-Internet Installed
[X] Remote Access RemoteAccess Installed
[X] DirectAccess and VPN (RAS) DirectAccess-VPN Installed
[X] Routing Routing Installed
[X] Web Server (IIS) Web-Server Installed
[X] Web Server Web-WebServer Installed
[X] Common HTTP Features Web-Common-Http Installed
[X] Default Document Web-Default-Doc Installed
[X] Directory Browsing Web-Dir-Browsing Installed
[X] HTTP Errors Web-Http-Errors Installed
[X] Static Content Web-Static-Content Installed
[X] HTTP Redirection Web-Http-Redirect Installed
[X] WebDAV Publishing Web-DAV-Publishing Installed
[X] Health and Diagnostics Web-Health Installed
[X] HTTP Logging Web-Http-Logging Installed
[X] Custom Logging Web-Custom-Logging Installed
[X] Logging Tools Web-Log-Libraries Installed
[X] ODBC Logging Web-ODBC-Logging Installed
[X] Request Monitor Web-Request-Monitor Installed
[X] Tracing Web-Http-Tracing Installed
[X] Performance Web-Performance Installed
[X] Static Content Compression Web-Stat-Compression Installed
[X] Dynamic Content Compression Web-Dyn-Compression Installed
[X] Security Web-Security Installed
[X] Request Filtering Web-Filtering Installed
[X] Basic Authentication Web-Basic-Auth Installed
[X] Centralized SSL Certificate Support Web-CertProvider Installed
[X] Client Certificate Mapping Authentic... Web-Client-Auth Installed
[X] Digest Authentication Web-Digest-Auth Installed
[X] IIS Client Certificate Mapping Authe... Web-Cert-Auth Installed
[X] IP and Domain Restrictions Web-IP-Security Installed
[X] URL Authorization Web-Url-Auth Installed
[X] Windows Authentication Web-Windows-Auth Installed
[X] Application Development Web-App-Dev Installed
[X] .NET Extensibility 4.5 Web-Net-Ext45 Installed
[X] ASP Web-ASP Installed
[X] ASP.NET 4.5 Web-Asp-Net45 Installed
[X] CGI Web-CGI Installed
[X] ISAPI Extensions Web-ISAPI-Ext Installed
[X] ISAPI Filters Web-ISAPI-Filter Installed
[X] FTP Server Web-Ftp-Server Installed
[X] FTP Service Web-Ftp-Service Installed
[X] FTP Extensibility Web-Ftp-Ext Installed
[X] IIS Hostable Web Core Web-WHC Installed
[X] Management Tools Web-Mgmt-Tools Installed
[X] IIS Management Console Web-Mgmt-Console Installed
[X] IIS 6 Management Compatibility Web-Mgmt-Compat Installed
[X] IIS 6 Metabase Compatibility Web-Metabase Installed
[X] IIS 6 Management Console Web-Lgcy-Mgmt-Console Installed
[X] IIS 6 Scripting Tools Web-Lgcy-Scripting Installed
[X] IIS 6 WMI Compatibility Web-WMI Installed
[X] IIS Management Scripts and Tools Web-Scripting-Tools Installed
[X] Management Service Web-Mgmt-Service Installed
[X] .NET Framework 3.5 Features NET-Framework-Features Installed
[X] .NET Framework 3.5 (includes .NET 2.0 and 3.0) NET-Framework-Core Installed
[X] .NET Framework 4.5 Features NET-Framework-45-Fea... Installed
[X] .NET Framework 4.5 NET-Framework-45-Core Installed
[X] ASP.NET 4.5 NET-Framework-45-ASPNET Installed
[X] WCF Services NET-WCF-Services45 Installed
[X] HTTP Activation NET-WCF-HTTP-Activat... Installed
[X] Message Queuing (MSMQ) Activation NET-WCF-MSMQ-Activat... Installed
[X] Named Pipe Activation NET-WCF-Pipe-Activat... Installed
[X] TCP Activation NET-WCF-TCP-Activati... Installed
[X] TCP Port Sharing NET-WCF-TCP-PortShar... Installed
[X] Group Policy Management GPMC Installed
[X] Ink and Handwriting Services InkAndHandwritingSer... Installed
[X] Media Foundation Server-Media-Foundation Installed
[X] Message Queuing MSMQ Installed
[X] Message Queuing Services MSMQ-Services Installed
[X] Message Queuing Server MSMQ-Server Installed
[X] RAS Connection Manager Administration Kit (CMAK) CMAK Installed
[X] Remote Server Administration Tools RSAT Installed
[X] Feature Administration Tools RSAT-Feature-Tools Installed
[X] Failover Clustering Tools RSAT-Clustering Installed
[X] Failover Cluster Management Tools RSAT-Clustering-Mgmt Installed
[X] Failover Cluster Module for Windows ... RSAT-Clustering-Powe... Installed
[X] Failover Cluster Command Interface RSAT-Clustering-CmdI... Installed
[X] WINS Server Tools RSAT-WINS Installed
[X] Role Administration Tools RSAT-Role-Tools Installed
[X] AD DS and AD LDS Tools RSAT-AD-Tools Installed
[X] Active Directory module for Windows ... RSAT-AD-PowerShell Installed
[X] AD DS Tools RSAT-ADDS Installed
[X] Active Directory Administrative ... RSAT-AD-AdminCenter Installed
[X] AD DS Snap-Ins and Command-Line ... RSAT-ADDS-Tools Installed
[X] DHCP Server Tools RSAT-DHCP Installed
[X] DNS Server Tools RSAT-DNS-Server Installed
[X] Fax Server Tools RSAT-Fax Installed
[X] Print and Document Services Tools RSAT-Print-Services Installed
[X] Remote Access Management Tools RSAT-RemoteAccess Installed
[X] Remote Access GUI and Command-Line T... RSAT-RemoteAccess-Mgmt Installed
[X] Remote Access module for Windows Pow... RSAT-RemoteAccess-Po... Installed
[X] RPC over HTTP Proxy RPC-over-HTTP-Proxy Installed
[X] Telnet Client Telnet-Client Installed
[X] User Interfaces and Infrastructure User-Interfaces-Infra Installed
[X] Graphical Management Tools and Infrastructure Server-Gui-Mgmt-Infra Installed
[X] Desktop Experience Desktop-Experience Installed
[X] Server Graphical Shell Server-Gui-Shell Installed
[X] Windows Identity Foundation 3.5 Windows-Identity-Fou... Installed
[X] Windows Internal Database Windows-Internal-Dat... Installed
[X] Windows PowerShell PowerShellRoot Installed
[X] Windows PowerShell 3.0 PowerShell Installed
[X] Windows PowerShell 2.0 Engine PowerShell-V2 Installed
[X] Windows PowerShell ISE PowerShell-ISE Installed
[X] Windows Process Activation Service WAS Installed
[X] Process Model WAS-Process-Model Installed
[X] Configuration APIs WAS-Config-APIs Installed
[X] Windows Server Backup Windows-Server-Backup Installed
[X] WINS Server WINS Installed
[X] WoW64 Support WoW64-Support Installed

DPM 2012 setup to remote SQL 2012. SSL cert error

First of all, the category I selected, which was for SQL server reporting services was as close as I could get. There wasn't a way to select System Center DPM server from the list. As this relates to the Report Server portion of the setup, I chose this category.
I am setting up DPM 2012 SP1 on a single use server (Windows Server 2102 R2 Standard) and remotely connecting to a new DB server (MSSQL 2012). I keep getting error ID:812 when trying to install, and the logs show that it is trying to set up report server,
but that it cannot establish a trust relationship for SSL/TLS.
* Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS
secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
I'm not clear on how to proceed. Invalid cert means it wants something very specific.
I have installed a domain issued cert from the DC on the SQL reporting server and have bound that cert to SSL using report server configuration. I then imported the cert into the DPM server in the trusted and personal certs. The DPM server has our DC as
a trusted source. That clearly doesn't work.
Thinking I may not be able to use a self-signed cert, I then installed our wildcard cert onto both the SQL server and the DPM server. I ran through the Report Server configuration again and bound that wildcard. This is a Godaddy wildcard cert.
Same problem no matter what I do. Clearly, this is matter of a cert issue, but I'm lost. There are zero instructions I've found on how to ensure Windows server 2012 cert requirements are met as it relates to SQL and DPM.
Thanks for your advice.
Kaden

Hi Kaden,
This thread is for reporting service and I hope i can provide some useful informaiton from reporting service side while i don't work on DPM at all. You may still need to find out the forum for the DPM and check there.
Regardingless of DPM, Reporting Service can usually create HTTP link and HTTPS link together. For the HTTP one, a certificate is needed. HTTPS is not needed excep you have the concern with security.
Usually application like DPM/SCOM will connect to the web service link provided by Reporting Service and work on that.
If the application requires a HTTPS link, then same thing has to be setup on reporting.
You need to install a certificate and add it to trust store and then configure reporting service to listening on HTTPs 443 port from the reporting service configuration manager.
You can find the steps here.http://technet.microsoft.com/en-us/library/ms345223(v=sql.110).aspx
After you create the HTTPS link successful, try to open the https web service link both remotely or locally from IE. If you can open it there without any error, reporting service is working fine.
For some applications, they would need special certificates installed on reporting service and used. You may check with the related product on this then.
In a summary, if you can configure a HTTPS link for reporting service can open it correctly, configuration steps on reporting service is fine.
If there is still any error from DPM, you would need check additional resource from DPM part.
Thanks,

Bug Check Error on Exchange 2013: Microsoft-Windows-WER-SystemErrorReporting

This is the error which prompted the server to reboot:
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          3/1/2015 9:27:00 PM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      exch13-02.domain.com
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 030115-27921-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-02T05:27:00.000000000Z" />
    <EventRecordID>36389</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>exch13-02.SC.ESILICON.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">030115-27921-01</Data>
</EventData>
</Event>

Hi,
It seems like a Windows Server problem, not an Exchange Server problem.
What’s the version of your Windows Server and Exchange Server?
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/f132d246-7114-4223-9ff7-e72f3ade0708/exchange-server-2013-restarts-frequently-after-cumulative-update-3-is-installed?forum=exchangesvradmin
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Getting Error while installing Exchange 2013 on server 2012

Error During Exchange 2013 Mailbox Transport
Role Install On Server 2012
Exchange
Server forums
>
Exchange
Server 2013 - Setup, Deployment, Updates, and Migration
Question
1
Sign
in to vote
I was installing Exchange 2013 on Server 2012. The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin. There has never been an Exchange instance on this domain. I got past
the prerequisite checks, and the installer showed 15 steps, so I walked away. When I came back, I saw this:
Step 8 of 15: Mailbox role: Transport service
Error:
The following error was generated when "$error.Clear();
          $maxWait = New-TimeSpan -Minutes 8
          $timeout = Get-Date;
          $timeout = $timeout.Add($maxWait);
          $currTime = Get-Date;
          $successfullySetConfigDC = $false;
          while($currTime -le $timeout)
            $setSharedCDCErrors = @();
            try
              Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
              $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
              if($successfullySetConfigDC)
                break;
              Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
            catch
              Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
            Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
            Start-Sleep -Seconds 30;
            $currTime = Get-Date;
          if( -not $successfullySetConfigDC)
            Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "Unable to set shared config DC.".

Hi Deepak,
From the error description, I would like to clarify the following things:
1. Please ensure that IPv6 on the network adaptor is turned on.
2. Please check if the account that you used to install Exchange has necessary permissions to perform the installation.
3. Make sure that DNS is configured correctly.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Exchange 2013 MSExchange Certificate Notification Error 2001

I literally have no idea of what to do with this error. I only see it when I restart the our Exchange 2013 Front End server.
Log Name:      Application
Source:        MSExchange Certificate Notification
Date:          9/20/2013 2:28:46 PM
Event ID:      2001
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      front end server
Description:
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (401) Unauthorized. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error:
(401) Unauthorized. ---> System.Net.WebException: The remote server returned an error: (401) Unauthorized.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
   at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
   at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
   at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
   at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
   at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__57.MoveNext()
   at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
   at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
   at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
   at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()

We're in the same boat. This is a production installation, running on Windows Server 2012, that we've been getting that error on for months. We just updated to CU3 and the error is still there. It doesn't seem to impact anything as far
as I can see, so I'm not certain that it matters.
For what it's worth, we use a single certificate for the IIS,POP,IMAP,SMTP services on all of our CAS servers. It's issued from our internal CA and has ~13 entries in the SAN for various purposes. It was issued from a custom template that we
use for various purposes, so it's possible there's something about the certificate that something somewhere doesn't like.   Unfortunately the error doesn't seem to contain any specifics, so it's difficult to tell what's happening.
The event immediately after the error is information event 2002:
A round of expiration check has finished. The next round is scheduled at...
Also at the same time there is a warning in the system log for Event 6037, LSA (LsaSrv)
The program w3wp.exe, with the assigned process ID 2804, could not authenticate locally by using the target name HTTP/owa.langslb.domain.com. The target name used is not valid. A target name should refer to one of the local computer names, for example,
the DNS host name.
Try a different target name.
The address is the address used by our hardware load balancer for our CAS servers. The IP for the name will be one of the CAS. On reboot, even if the load balancer doesn't have time to detect one of the systems being offline, it would have a
percentage chance of getting the IP of an already online system.
I have the exact same error with Exchange 2013 CU3 CAS servers. can any one explain what is that about? and how to resolve it?

WLC Virtual Interface config for a public SSL cert for Web Authentication

I'm trying to get a cert loaded on my 5508 WLC running 7.6.130.0 so when a Web-Auth users tries to authenticate they don't get the SSL cert error.
In the document "Generate CSR for Third−Party Certificates and
Download Chained Certificates to the WLC"
Document ID: 109597 it states the following
"Note: It is important that you provide the correct Common Name. Ensure that the host name that is
used to create the certificate (Common Name) matches the Domain Name System (DNS) host name
entry for the virtual interface IP on the WLC and that the name exists in the DNS as well. Also, after
you make the change to the VIP interface, you must reboot the system in order for this change to take
effect.
Here are my questions.
1. I have always had 1.1.1.1 as the address of the Virtual interface, should that change or can I leave it as 1.1.1.1?
2. In the "DNS Host Name" Field do I simply put the domain or the FQDN? Example. Company.com or hostname.company.com

Hi,
1) You can change that if you want. Normally it is non-Public and non-routable in your network.
2) Put the Host name for which you are going to give in your company DNS server where that Host name would be mapped to the Virtual ip address.
Regards
Dhiresh
** Please rate helpful posts**

SSL cert error on exchange 2013.

Similar Messages

Maybe you are looking for