SSL VPN with machine certificate authentication

Hi All,
I've configured a VPN profile for an Anyconnect VPN connection on my test environment. I've enabled AAA (RSA) and certificate authentication, configured the RSA servers correctly and uploaded the root and issuing certificates. I managed to get this working with machine certificates using a Microsoft PKI. With crypto debugging enabled I can see the CERT API thread wake up and correctly authenticate the certificate. So far so good....
Now I configured the same on our production environment and can't get it to work!! The anyconnect client shows an error: "certificate validation failure"
The strange thing is that the crypto debugging doesn't give me one single line of output. It looks like the certificate doesn't even reach the ASA. My question is, what is stopping the "CERT API thread" I mentioned before from waking up and validating the certificate?? Does someone have an explenation for that?
btw. We have other VPN configurations on the same production/live ASA's with certificate authentication the are working and show up in the debugging.
Thanks in advance for your help
Hardware is ASA5540, software version 8.2(5).
Some pieces of the configuration below:
group-policy VPN4TEST-Policy internal
group-policy VPN4TEST-Policy attributes
wins-server value xx.xx.xx.xx
dns-server value xx.xx.xx.xx
vpn-simultaneous-logins 1
vpn-idle-timeout 60
vpn-filter value VPN4TEST_allow_access
vpn-tunnel-protocol IPSec svc webvpn
group-lock none
ipsec-udp enable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
default-domain value cs.ad.klmcorp.net
vlan 44
nac-settings none
address-pools value VPN4TEST-xxx
webvpn
svc modules value vpngina
svc profiles value KLM-SSL-VPN-VPN4TEST
tunnel-group VPN4TEST-VPN type remote-access
tunnel-group VPN4TEST-VPN general-attributes
address-pool VPN4TEST-xxx
authentication-server-group RSA-7-Authent
default-group-policy VPN4TEST-Policy
tunnel-group VPN4TEST-VPN webvpn-attributes
authentication aaa certificate
group-alias VPN4TEST-ANYCONNECT enable

Forgot to mention, I'm using the same laptop in both situations (test and production). Tested with anyconnect versions 3.1.02.040 and 3.0.0.629.

Similar Messages

SSL VPN with client, anyconnect.

I've set up a simple test on SSL VPN with client on a 3800.
It didnt work. I assume i have to turn on the IP http server so that the client can hit it.
but when I turned it on, the client goes to SDM, nothing with ssl vpn happened. it tells me the pay is not available.
The underlying routing is fine.
Could you tell me where it is configured wrong?
Config is copied below.
thanks,
Han
=======
Current configuration : 3340 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable password cisco
aaa new-model
aaa authentication login default local
aaa session-id common
no network-clock-participate slot 1
crypto pki trustpoint TP-self-signed-3551041125
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3551041125
revocation-check none
rsakeypair TP-self-signed-3551041125
crypto pki certificate chain TP-self-signed-3551041125
certificate self-signed 01
3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33353531 30343131 3235301E 170D3131 31313135 31383238
30365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 35353130
34313132 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100CFCF CFFAD76A 50DA82C9 8D4E3F90 64AD24EB 5409C5E2 43BC64F3 07F6C0E0
29FF2D71 0DA0D897 2F814BD2 7F817503 429D4BC6 6AD6EEA4 DFA74BAD 0EAF84D5
6ED55EC0 6C637178 BEEBCD1D 184BB90C CA84E974 48003885 87B53F2E 36A04661
23DA2CBB DD8EEE1D 2F25AF9A E21DC288 BF76A17C C1F4BA07 95F09377 A12BE01A
53750203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
551D1104 1B301982 17526F75 7465722E 776E7362 6E6F632E 696E7465 726E616C
301F0603 551D2304 18301680 14BE9E8F ED788928 560D7CA1 EED89B0D DE34D772
5D301D06 03551D0E 04160414 BE9E8FED 78892856 0D7CA1EE D89B0DDE 34D7725D
300D0609 2A864886 F70D0101 04050003 818100BC 4A2A3C47 7BF809AF 78EE0FD9
73692913 F280765E BAFAECAB ED32C38D 3030810B C62C7F45 13C8A6EE AE96A891
CDD4C78B 803299AD EB098B27 383CEF6F 0E2B811F 3ECFADBA 07CD0AC6 BBB8C5FE
B2FC0FD8 562B7100 BB28036E 4575D1F5 B17687C6 8EACBD66 A9E52FEE A030E69A
CAAE9F1B 618FA59D 02C25BC8 77D6CAC2 C7E56F
quit
dot11 syslog
ip cef
multilink bundle-name authenticated
voice-card 0
no dspfarm
username cisco1 privilege 15 secret 5 $1$L2RA$Zqs6FLce5Ns5fny5aRL49/
archive
log config
hidekeys
interface GigabitEthernet0/0
ip address dhcp
duplex auto
speed auto
media-type rj45
end
interface Loopback1
ip address 1.1.1.1 255.255.255.0
interface GigabitEthernet0/0
ip address dhcp
duplex auto
speed auto
media-type rj45
ip local pool svc-poll 1.1.1.50 1.1.1.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.254
ip http server
no ip http secure-server
control-plane
line con 0
logging synchronous
line aux 0
line vty 0 4
scheduler allocate 20000 1000
webvpn gateway SSLVPN
ip interface GigabitEthernet0/0 port 443
ssl trustpoint local
inservice
webvpn install svc flash:/webvpn/svc.pkg
webvpn context SSLVPN
ssl authenticate verify all
policy group default
   functions svc-required
   svc default-domain "test.org"
   svc keep-client-installed
   svc split dns "primary"
default-group-policy default
gateway SSLVPN
inservice
end

Using the SDM follow the below config example
http://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a008071c58b.shtml
The text "cisco 3800 ssl vpn configuration" in my favorite search engine, identified the above.
HTH>

I want to bind my client certificate with machine certificate in order to bind user with dedicated one machine. Kindly help

I have created one dedicated root CA for domain and auto enrollment has been enabled through Group Policy.
I want to bind my client certificate with machine certificate in order to bind user with dedicated with one machine. In order to prevent duplicate logins

Hi,
How about using
User Rights Assignment?
You can deny all other users’
log on locally right on the machine.
User Rights Assignment
http://technet.microsoft.com/en-us/library/cc780182(v=WS.10).aspx
Best Regards,
Amy Wang

IOS SSL VPN WITH RADIUS Authorization

Hi
I'm trying to authenitcate and authorize the users loggining into SSLVPN via ACS and although the ACS loggs and "TEST" command on the router shw succeeful authentication i receive the flollowing debug
*Jun 6 22:39:50.157: %SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: SSLVPN i_vrf: 0 f_vrf: 0 status: SSL/TLS connection successful with remote at 10.0.0.100:4346
Rack1R1(config)#
*Jun 6 22:40:09.409: %SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: SSLVPN i_vrf: 0 f_vrf: 0 status: SSL/TLS connection successful with remote at 10.0.0.100:4357
Rack1R1(config)#
*Jun 6 22:40:21.409: WV-AAA: AAA authentication request sent for user: "SSLUSER"
*Jun 6 22:40:21.409: RADIUS/ENCODE(00000000):Orig. component type = INVALID
*Jun 6 22:40:21.409: RADIUS/ENCODE(00000000): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
*Jun 6 22:40:21.409: RADIUS(00000000): Config NAS IP: 150.1.1.1
*Jun 6 22:40:21.409: RADIUS(00000000): sending
*Jun 6 22:40:21.409: RADIUS(00000000): Send Access-Request to 10.0.0.100:1645 id 1645/27, len 60
*Jun 6 22:40:21.409: RADIUS: authenticator AC 16 B3 54 46 72 37 05 - 4C 00 19 21 81 97 40 6E
*Jun 6 22:40:21.409: RADIUS: User-Name           [1]   16 "SSLUSER@SSLVPN"
Rack1R1(config)#
*Jun 6 22:40:21.409: RADIUS: User-Password       [2]   18 *
*Jun 6 22:40:21.409: RADIUS: NAS-IP-Address      [4]   6   150.1.1.1
*Jun 6 22:40:21.669: RADIUS: Received from id 1645/27 10.0.0.100:1645, Access-Accept, len 282
*Jun 6 22:40:21.669: RADIUS: authenticator 2D 2C B0 39 89 4C 41 88 - 40 32 E2 09 0D 7F 6B 0C
*Jun 6 22:40:21.669: RADIUS: Framed-IP-Address   [8]   6   255.255.255.255
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 28
*Jun 6 22:40:21.669: RADIUS:   Cisco AVpair       [1]   22 "webvpn:svc-enabled=1"
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 29
*Jun 6 22:40:21.669: RADIUS:   Cisco AVpair       [1]   23 "webvpn:svc-required=1"
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 50
*Jun 6 22:40:21.669: RADIUS:   Cisco AVpair       [1]   44 "webvpn:split-include=6.6.6.0 255.255.255.0"
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 35
*Jun 6 22:40:21.669: RADIUS:   Cisco AVpair       [1]   29 "webvpn:keep-svc-installed=1"
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 31
*Jun 6 22:40:21.669: RADIUS:   Cisco AVpair       [1]   25 "webvpn:addr-pool=SSLVPN"
*Jun 6 22:40:21.669: RADIUS: Vendor, Cisco       [26] 41
*Jun 6 22:40:21.669: RADIUS: Service-Type        [6]   6   Outbound                  [5]
*Jun 6 22:40:21.669: RADIUS: Class               [25] 36
*Jun 6 22:40:21.669: RADIUS:   43 41 43 53 3A 30 2F 34 37 30 2F 39 36 30 31 30 [CACS:0/470/96010]
*Jun 6 22:40:21.669: RADIUS:   31 30 31 2F 53 53 4C 55 53 45 52 40 53 53 4C 56 [101/SSLUSER@SSLV]
*Jun 6 22:40:21.669: RADIUS:   50 4E                                            [PN]
*Jun 6 22:40:21.673: RADIUS(00000000): Received from id 1645/27
*Jun 6 22:40:21.673: RADIUS(00000000): Unique id not in use
Rack1R1(config)#
*Jun 6 22:40:21.673: RADIUS/DECODE(00000000): There is no RADIUS DB Some Radius attributes may not be stored
*Jun 6 22:40:21.673: AAA/AUTHOR (0x0): Pick method list 'RAD'
Rack1R1(config)#
*Jun 6 22:40:23.673: WV-AAA: AAA Authentication Failed!
Rack1R1(config)#
*Jun 6 22:40:24.069: %SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: SSLVPN i_vrf: 0 f_vrf: 0 status: SSL/TLS connection successful with remote at 10.0.0.100:4359
Rack1R1(config)#
router Configuration
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Rack1R1
boot-start-marker
boot-end-marker
! card type command needed for slot/vwic-slot 0/1
logging message-counter syslog
enable password cisco
aaa new-model
aaa authentication login RAD group radius
aaa authorization network RAD group radius
aaa session-id common
dot11 syslog
ip source-route
ip cef
no ip domain lookup
ip domain name INE.com
ip host cisco.com 136.1.121.1
ip host www.cisco.com 136.1.121.1
ip host www.google.com 136.1.121.1
ip host www.ripe.net 136.1.121.1
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-3354934498
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3354934498
revocation-check none
rsakeypair TP-self-signed-3354934498
crypto pki certificate chain TP-self-signed-3354934498
certificate self-signed 01
30820247 308201B0 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33333534 39333434 3938301E 170D3132 30363036 31333030
32375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 33353439
33343439 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1E5 889BEB9A 31DFC0D4 7C7F698F 0F52E404 0849263A BD443A96 13C6A440
DCBD4345 EF301E91 0D4AADD9 3C2A17F2 E26E5E96 90F96809 D8FCCF32 7EB58100
74E4772C 6395E03C 1B7F1AF5 482F861F DD62D079 F9977FE2 0E544E18 5FAAF290
DF665B45 EF10D3EC D924E87A 5F827F07 06DE8961 F361C3FA EDBE5F68 452221C8
B9570203 010001A3 6F306D30 0F060355 1D130101 FF040530 030101FF 301A0603
551D1104 13301182 0F526163 6B315231 2E494E45 2E636F6D 301F0603 551D2304
18301680 140B00B8 FD9B58CF 8A6F51BE 25DEC6C5 85E14495 05301D06 03551D0E
04160414 0B00B8FD 9B58CF8A 6F51BE25 DEC6C585 E1449505 300D0609 2A864886
F70D0101 04050003 81810006 4192E2DB ABAF533E 9C4BF24E DF6BFD45 144A6AE9
C874E311 27B23E7B E8DB18C3 4FFB4ACA 4B09F63E 62501578 D8F58D73 D08F016F
49C99B8D DA1073E5 A141C1C7 505BD191 FC58EA7F 54BD9B98 579E1726 7C1CA619
A45DDABC 8F315EE9 D20A30A8 2BD5D67D B744BD69 353B4670 E5BA4540 47059E60
9DC4C940 E91AACBB 4EAFFA
        quit
username admin privilege 15 password 0 admin
username SSLUSER@SSLVPN password 0 cisco
archive
log config
hidekeys
crypto ipsec client ezvpn EZVPN_CLIENT
connect auto
mode client
xauth userid mode interactive
ip tcp synwait-time 5
interface Loopback0
ip address 150.1.1.1 255.255.255.0
interface Loopback6
ip address 6.6.6.6 255.255.255.0
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet0/1
no ip address
duplex auto
speed auto
interface FastEthernet0/1.11
encapsulation dot1Q 12
ip address 136.1.11.1 255.255.255.0
interface FastEthernet0/1.121
encapsulation dot1Q 121
ip address 136.1.121.1 255.255.255.0
interface FastEthernet0/0/0
interface FastEthernet0/0/1
interface FastEthernet0/0/2
interface FastEthernet0/0/3
interface Virtual-Template1 type tunnel
no ip address
tunnel mode ipsec ipv4
interface Vlan1
no ip address
router rip
version 2
passive-interface FastEthernet0/1.11
network 136.1.0.0
network 150.1.0.0
no auto-summary
ip local pool SSLVPN 40.0.0.1 40.0.0.254
ip forward-protocol nd
ip route 10.0.0.0 255.255.255.0 136.1.121.12
ip http server
ip http secure-server
ip dns server
ip access-list extended SPLIT
permit ip 136.1.11.0 0.0.0.255 10.0.0.0 0.0.0.255
ip radius source-interface Loopback0
radius-server host 10.0.0.100 auth-port 1645 acct-port 1646 key CISCO
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
line vty 0 4
password cisco
scheduler allocate 20000 1000
webvpn gateway SSLVPN
ip interface Loopback0 port 443
http-redirect port 80
ssl encryption rc4-md5
ssl trustpoint TP-self-signed-3354934498
logging enable
inservice
webvpn install svc flash:/webvpn/anyconnect-win-2.5.3055-k9.pkg sequence 1
webvpn context SSLVPN
title "**SSLVPN **"
ssl encryption rc4-md5
ssl authenticate verify all
aaa authentication list RAD
aaa authentication domain @SSLVPN
aaa authorization list RAD
gateway SSLVPN
inservice
end
Any Idea?

Hi,
As I understand , you need to know if you can assign static ip to a user and also is there any other way of assiging a ip other than local pool.
There are three ways of assinging an ip address to VPN client: using local pool, AAA server,DHCP.
You can use the following link for more information:-
Assigning static ip for user present locally on ASA:-
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080a7afb2.shtml
For user present on Active Directory:-
http://technet.microsoft.com/en-us/library/cc786213%28WS.10%29.aspx
The following is the link for assigning ip address using DHCP:-
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080a66bc6.shtml
I hope it helps.
Thanks,
Shilpa

ISE EAP-Chaining with machine, certificate and domain credentials

Good morning,
A customer wants to do the following for their corporate wireless users (all clients will be customer assets):
Corp. wireless to authenticate with 2-factor authentication:
•1. Certificate
•2. Machine auth thru AD
•3. Domain creds
When client authenticates, they want to match on 2 out of the 3 conditions before allowing access.
Clients are Windows laptops and corporate iPhones.
Certs can be issued thru GPO and MDM for iPhones
Client supplicant on laptops is native Windows - which I understand is a compatibility issue from this thread: https://supportforums.cisco.com/thread/2185627
My first question is: can this be done?
Second question: how would i implement this from an AuthC/AuthZ perspective?
Thanks in advance,
Andrew

You can do this configuring anyconnect with NAM modules on endpoints! But I don't make sense configure some clients with certificate and others with domains credentials...
For your information, I'm actually configuring EAP-Chaining on ISE 1.2 and i'm gotting some problems. The first one I got with windows 8, for some reason windows was sending wrong information about the machine password but I solved the problem installing a KB on windows 8 machines (http://support.microsoft.com/kb/2743127/en-us). The second one I got with windows 7 that are sending information correctly about domain but wrong information about user credentials, on ISE logs I can see that windows 7 are sending user "anonymous" + machine name on the first longin... after windows 7 start if I remove the cable and connect again the authentication and authorization happen correctly. I still invastigate the root cause and if there is a KB to solve the problem as I did with windows 8.
Good luck and keep in touch.
http://support.microsoft.com/kb/2743127/en-us

EAP-TLS with machine certificate

Hello all,
I'm looking for a solution to authenticate both machine and wireless users. I've been finding out solutions like EAP-TLS using the machine certificate to stablished the tunnel and authenticating user credentials (LDAP store) over this tunnel. Now i want to know if is possible to use this configuration using an ACS Radius servers and what SOs are supported to do this without external supplicants (Windows XP, Windows 7, Windows 8, iOs, Android...).
Thanks a lot.
Best regards.

Hi Alfonso,
Certificate Retrieval for EAP-TLS Authentication
ACS 5.4 supports certificate retrieval for user or machine authentication that uses EAP-TLS protocol. The user or machine record on AD includes a certificate attribute of binary data type. This can contain one or more certificates. ACS refers to this attribute as userCertificate and does not allow you to configure any other name for this attribute.
ACS retrieves this certificate for verifying the identity of the user or machine. The certificate authentication profile determines the field (SAN, CN, SSN, SAN-Email, SAN-DNS, or SAN-other name) to be used for retrieving the certificates.
After ACS retrieves the certificate, it performs a binary comparison of this certificate with the client certificate. When multiple certificates are received, ACS compares the certificates to check if one of them match. When a match is found, ACS grants the user or machine access to the network.
Configuring CA Certificates
When a client uses the EAP-TLS protocol to authenticate itself against the ACS server, it sends a client certificate that identifies itself to the server. To verify the identity and correctness of the client certificate, the server must have a preinstalled certificate from the Certificate Authority (CA) that has digitally signed the client certificate.
If ACS does not trust the client's CA certificate, then you must install in ACS the entire chain of successively signed CA certificates, all the way to the top-level CA certificate that ACS trusts. CA certificates are also known as trust certificates.
You use the CA options to install digital certificates to support EAP-TLS authentication. ACS uses the X.509 v3 digital certificate standard. ACS also supports manual certificate acquisition and provides the means for managing a certificate trust list (CTL) and certificate revocation lists (CRLs).
Digital certificates do not require the sharing of secrets or stored database credentials. They can be scaled and trusted over large deployments. If managed properly, they can serve as a method of authentication that is stronger and more secure than shared secret systems.
Mutual trust requires that ACS have an installed certificate that can be verified by end-user clients. This server certificate may be issued from a CA or, if you choose, may be a self-signed certificate
Also check the below link,
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/users_id_stores.html#wp1170404

Project Server 2010 Web services access with Client Certificate Authentication

We switched our SharePoint/Project Server 2010 farm to use client certificate authentication with Active Directory Federation Services (AD FS) 2.0, which is working without issue. We have some administrative Project Server Interface (PSI)
web service applications that no longer connect to server with the new authentication configuration. Our custom applications are using the WCF interface to access the public web services.
Please let us know if it is possible to authenticate with AD FS 2.0 and then call
Project Server web services. Any help or coding examples would be greatly appreciated.

what is the error occurred when the custom PSI app connects?
can you upload the ULS logs here for research?
What is the user account format you specified in the code for authentication?
For proper authorization, the “user logon account” in PWA for the user needs to be changed from domain\username to the claims token (e.g.
'I:0#.w|mybusinessdomain\ewmccarty').
It requires you to manually call the UpnLogon method of
“Claims to Windows Token Service”. if (Thread.CurrentPrincipal.Identity is ClaimsIdentity)
{ var identity = (ClaimsIdentity)Thread.CurrentPrincipal.Identity; }
if (Thread.CurrentPrincipal.Identity is ClaimsIdentity)
var identity = (ClaimsIdentity)Thread.CurrentPrincipal.Identity;
Than you need to extract UPN-Claim from the identity.
Upload the verbose log if possible.
Did you see this?
http://msdn.microsoft.com/en-us/library/ff181538(v=office.14).aspx
Cheers. Happy troubleshooting !!! Sriram E - MSFT Enterprise Project Management

Connecting Java client to SSL server with existing certificates

I am currently trying to connect my Java client to an existing server application
written in C++. I have been provided the needed certificates (root.pem, server.pem,
and client.pem). My code simply creates a SSLSocket and then attempts to read
from it. Something goes wrong during the handshake process and I get a SSLHandshakeException. The certificates have been added to the keystore
I am using, and I do not know any other action to take.
Here is the debug output:
setting up default SSLSocketFactory
use default SunJSSE impl class: com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl is loaded
keyStore is :
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: keystore.jks
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
Subject: [email protected], CN=Employee, OU=test, O=company-USA, L=City, ST=AL, C=US
Issuer: [email protected], CN=company Employee, OU=test, O="company, Inc.", L=City, ST=AL, C=US
Algorithm: RSA; Serial number: 0xb40b909f74d167aa
Valid from Tue Sep 12 09:42:01 CDT 2006 until Thu Oct 12 09:42:01 CDT 2006
adding as trusted cert:
Subject: [email protected], CN=Employee, OU=test, O="company, Inc.", L=City, ST=AL, C=US
Issuer: [email protected], CN=ISAC Employee, OU=test, O="company, Inc.", L=City, ST=AL, C=US
Algorithm: RSA; Serial number: 0xb40b909f74d167ab
Valid from Tue Sep 12 09:49:12 CDT 2006 until Thu Oct 12 09:49:12 CDT 2006
adding as trusted cert:
Subject: [email protected], CN=company Employee, OU=test, O="company, Inc.", L=City, ST=AL, C=US
Issuer: [email protected], CN=company, OU=test, O="company, Inc.", L=City, ST=AL, C=US
Algorithm: RSA; Serial number: 0xf6e3ada87dc4004f
Valid from Tue Sep 12 09:40:32 CDT 2006 until Thu Oct 12 09:40:32 CDT 2006
init context
trigger seeding of SecureRandom
done seeding SecureRandom
instantiated an instance of class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
SSL socket created
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1158089181 bytes = { 138, 112, 170, 91, 246, 86, 216, 146, 160, 188, 243, 154, 238, 132, 33, 219, 251, 3, 93, 25, 191, 247, 41, 14, 99, 135, 130, 23 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
[write] MD5 and SHA1 hashes: len = 79
0000: 01 00 00 4B 03 01 45 07 0A DD 8A 70 AA 5B F6 56 ...K..E....p.[.V
0010: D8 92 A0 BC F3 9A EE 84 21 DB FB 03 5D 19 BF F7 ........!...]...
0020: 29 0E 63 87 82 17 00 00 24 00 04 00 05 00 2F 00 ).c.....$...../.
0030: 35 00 33 00 39 00 32 00 38 00 0A 00 16 00 13 00 5.3.9.2.8.......
0040: 09 00 15 00 12 00 03 00 08 00 14 00 11 01 00 ...............
Client Thread, WRITE: TLSv1 Handshake, length = 79
[write] MD5 and SHA1 hashes: len = 107
0000: 01 03 01 00 42 00 00 00 20 00 00 04 01 00 80 00 ....B... .......
0010: 00 05 00 00 2F 00 00 35 00 00 33 00 00 39 00 00 ..../..5..3..9..
0020: 32 00 00 38 00 00 0A 07 00 C0 00 00 16 00 00 13 2..8............
0030: 00 00 09 06 00 40 00 00 15 00 00 12 00 00 03 02 .....@..........
0040: 00 80 00 00 08 00 00 14 00 00 11 45 07 0A DD 8A ...........E....
0050: 70 AA 5B F6 56 D8 92 A0 BC F3 9A EE 84 21 DB FB p.[.V........!..
0060: 03 5D 19 BF F7 29 0E 63 87 82 17 .]...).c...
Client Thread, WRITE: SSLv2 client hello message, length = 107
[Raw write]: length = 109
0000: 80 6B 01 03 01 00 42 00 00 00 20 00 00 04 01 00 .k....B... .....
0010: 80 00 00 05 00 00 2F 00 00 35 00 00 33 00 00 39 ....../..5..3..9
0020: 00 00 32 00 00 38 00 00 0A 07 00 C0 00 00 16 00 ..2..8..........
0030: 00 13 00 00 09 06 00 40 00 00 15 00 00 12 00 00 .......@........
0040: 03 02 00 80 00 00 08 00 00 14 00 00 11 45 07 0A .............E..
0050: DD 8A 70 AA 5B F6 56 D8 92 A0 BC F3 9A EE 84 21 ..p.[.V........!
0060: DB FB 03 5D 19 BF F7 29 0E 63 87 82 17 ...]...).c...
Client Thread, received EOFException: error
Client Thread, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
Client Thread, SEND TLSv1 ALERT: fatal, description = handshake_failure
Client Thread, WRITE: TLSv1 Alert, length = 2
[Raw write]: length = 7
0000: 15 03 01 00 02 02 28 ......(
Client Thread, called closeSocket()
Error: Remote host closed connection during handshake
Thread-4, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake

(I am the original poster of this message, I had to create a new username though).
The original problem had to do with incompatibilities with the protocol and/or cipher suites
used. Now, the client and server perform most of the handshake process, but something
goes wrong as the server requests the client certificate. In other words, the server requires
mutual authentication, but for some reason it seems like my JSSE client won't send over
it's client certificate. I don't get any type of bad certificate exceptions, so I'm not sure
where the source of the error lies.
Updated output:
setting up default SSLSocketFactory
use default SunJSSE impl class: com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl is loaded
keyStore is : keystore
keyStore type is : jks
keyStore provider is :
init keystore
init keymanager of type SunX509
trustStore is: truststore
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
Subject: [email protected], CN=Employee, OU=default, O="default Inc.", L=default, ST=AL, C=US
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Algorithm: RSA; Serial number: 0xb40b909f74d167ab
Valid from Tue Sep 12 09:49:12 CDT 2006 until Thu Oct 12 09:49:12 CDT 2006
adding as trusted cert:
Subject: [email protected], CN=default-Server, OU=HawkEye, O=default, L=default, ST=AL, C=US
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Algorithm: RSA; Serial number: 0xb40b909f74d167ac
Valid from Tue Sep 12 14:42:28 CDT 2006 until Thu Oct 12 14:42:28 CDT 2006
adding as trusted cert:
Subject: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Algorithm: RSA; Serial number: 0xf6e3ada87dc4004f
Valid from Tue Sep 12 09:40:32 CDT 2006 until Thu Oct 12 09:40:32 CDT 2006
init context
trigger seeding of SecureRandom
done seeding SecureRandom
instantiated an instance of class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1158242806 bytes = { 71, 195, 185, 44, 86, 96, 14, 11, 171, 76, 105, 135, 136, 114, 53, 54, 137, 75, 202, 254, 112, 208, 240, 91, 199, 246, 175, 207 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
Client Thread, WRITE: TLSv1 Handshake, length = 79
Client Thread, READ: TLSv1 Handshake, length = 74
*** ServerHello, TLSv1
RandomCookie: GMT: 1158242807 bytes = { 63, 93, 48, 73, 98, 251, 160, 215, 61, 110, 246, 12, 5, 209, 95, 194, 152, 193, 0, 181, 135, 26, 150, 174, 52, 92, 56, 250 }
Session ID: {83, 31, 134, 30, 76, 200, 183, 120, 7, 94, 26, 65, 186, 91, 197, 25, 10, 193, 94, 220, 198, 250, 162, 153, 6, 89, 12, 250, 66, 105, 249, 211}
Cipher Suite: TLS_RSA_WITH_AES_128_CBC_SHA
Compression Method: 0
%% Created: [Session-1, TLS_RSA_WITH_AES_128_CBC_SHA]
** TLS_RSA_WITH_AES_128_CBC_SHA
Client Thread, READ: TLSv1 Handshake, length = 1903
*** Certificate chain
chain [0] = [
Version: V3
Subject: [email protected], CN=Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 164546130673614659100546464587508805401937082626997447139358150641653094778762702643605529386963945060462618417820295217144739538713137107756847225226998964727905246706969036839701385553183842454061172884072035749790213037240682893878786969498404371282074360019097248835858617183835587887295684928062301303789
public exponent: 65537
Validity: [From: Tue Sep 12 09:49:12 CDT 2006,
               To: Thu Oct 12 09:49:12 CDT 2006]
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
SerialNumber: [    b40b909f 74d167ab]
Certificate Extensions: 4
[1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
0020: 65 e
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: C8 EA 02 93 42 9E 44 D1 55 7D 2D 32 4B 9B 1C 6D ....B.D.U.-2K..m
0010: 63 6B 73 82 cks.
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 2C BC 66 DC 06 BA 62 79 3B 1A 20 92 E0 81 71 A0 ,.f...by;. ...q.
0010: 0D 05 3C 95 ..<.
[[email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US]
SerialNumber: [    f6e3ada8 7dc4004f]
[4]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
Signature:
0000: BF 60 5A 67 3E E6 F0 92 4F E4 81 6D 71 0A 2E E8 .`Zg>...O..mq...
0010: F3 59 A1 87 7B D1 3A 7A CB FF D6 39 63 79 B6 82 .Y....:z...9cy..
0020: 2A 22 D0 46 51 30 6B 2A 61 6B A0 4C F0 3B CE 5B *".FQ0k*ak.L.;.[
0030: 9C 1D 46 CB D7 C2 B2 23 E2 A5 06 CD 12 F8 A9 CB ..F....#........
0040: B5 A2 43 B1 06 4C 42 B5 67 F2 DF 50 6B BC 8A 5E ..C..LB.g..Pk..^
0050: 95 0D F3 2A 73 A8 5A C8 55 77 D7 36 74 16 9E 05 ...*s.Z.Uw.6t...
0060: 85 C6 DC 3C 44 D3 06 5E 47 0C 1F 80 40 30 C7 D8 ...<D..^G...@0..
0070: 8C 27 FF B9 0C 71 EB D4 31 5C 1F 15 A1 23 6F A2 .'...q..1\...#o.
chain [1] = [
Version: V3
Subject: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 140862286957037297158683104484469503810921697537964422595574798580128510755934413463045842414762254029728885690233847950678735782281077619629628663140568366247472189890316085560712610474766899389736269383565795688749374256479726939861138704211990111677657317335172626254520371267441364353295155431963634875809
public exponent: 65537
Validity: [From: Tue Sep 12 09:40:32 CDT 2006,
               To: Thu Oct 12 09:40:32 CDT 2006]
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
SerialNumber: [    f6e3ada8 7dc4004f]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 2C BC 66 DC 06 BA 62 79 3B 1A 20 92 E0 81 71 A0 ,.f...by;. ...q.
0010: 0D 05 3C 95 ..<.
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 2C BC 66 DC 06 BA 62 79 3B 1A 20 92 E0 81 71 A0 ,.f...by;. ...q.
0010: 0D 05 3C 95 ..<.
[[email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US]
SerialNumber: [    f6e3ada8 7dc4004f]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: AB 84 38 1F 7B 71 D8 87 FF 24 DB C2 7E DC D0 0B ..8..q...$......
0010: 60 60 14 A8 F8 D5 46 AD 6B FC 33 90 6F 43 08 17 ``....F.k.3.oC..
0020: AE 2B EE 6C 2B 29 85 E2 A6 67 EE 5D A4 61 F3 9E .+.l+)...g.].a..
0030: E7 CA B1 27 F9 11 36 ED 93 05 7B E1 20 90 57 B5 ...'..6..... .W.
0040: C6 F9 8A 9D 50 CD B3 4A 54 DC 1B 52 EC EA 7A 0B ....P..JT..R..z.
0050: B6 E6 95 FD DD 80 BE 66 F0 77 F4 E7 9A 8A A3 EF .......f.w......
0060: 9B 68 57 0C 9C 4B 4C C0 24 C5 34 16 D3 8E 45 27 .hW..KL.$.4...E'
0070: CA 23 F1 E0 C5 5E FB FB AA 1C 21 6E CB 5B 57 D9 .#...^....!n.[W.
Found trusted certificate:
Version: V3
Subject: [email protected], CN=Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 164546130673614659100546464587508805401937082626997447139358150641653094778762702643605529386963945060462618417820295217144739538713137107756847225226998964727905246706969036839701385553183842454061172884072035749790213037240682893878786969498404371282074360019097248835858617183835587887295684928062301303789
public exponent: 65537
Validity: [From: Tue Sep 12 09:49:12 CDT 2006,
               To: Thu Oct 12 09:49:12 CDT 2006]
Issuer: [email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US
SerialNumber: [    b40b909f 74d167ab]
Certificate Extensions: 4
[1]: ObjectId: 2.16.840.1.113730.1.13 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1F 16 1D 4F 70 65 6E 53 53 4C 20 47 65 6E 65 ....OpenSSL Gene
0010: 72 61 74 65 64 20 43 65 72 74 69 66 69 63 61 74 rated Certificat
0020: 65 e
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: C8 EA 02 93 42 9E 44 D1 55 7D 2D 32 4B 9B 1C 6D ....B.D.U.-2K..m
0010: 63 6B 73 82 cks.
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 2C BC 66 DC 06 BA 62 79 3B 1A 20 92 E0 81 71 A0 ,.f...by;. ...q.
0010: 0D 05 3C 95 ..<.
[[email protected], CN=default Employee, OU=default, O="default, Inc.", L=default, ST=AL, C=US]
SerialNumber: [    f6e3ada8 7dc4004f]
[4]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
Signature:
0000: BF 60 5A 67 3E E6 F0 92 4F E4 81 6D 71 0A 2E E8 .`Zg>...O..mq...
0010: F3 59 A1 87 7B D1 3A 7A CB FF D6 39 63 79 B6 82 .Y....:z...9cy..
0020: 2A 22 D0 46 51 30 6B 2A 61 6B A0 4C F0 3B CE 5B *".FQ0k*ak.L.;.[
0030: 9C 1D 46 CB D7 C2 B2 23 E2 A5 06 CD 12 F8 A9 CB ..F....#........
0040: B5 A2 43 B1 06 4C 42 B5 67 F2 DF 50 6B BC 8A 5E ..C..LB.g..Pk..^
0050: 95 0D F3 2A 73 A8 5A C8 55 77 D7 36 74 16 9E 05 ...*s.Z.Uw.6t...
0060: 85 C6 DC 3C 44 D3 06 5E 47 0C 1F 80 40 30 C7 D8 ...<D..^G...@0..
0070: 8C 27 FF B9 0C 71 EB D4 31 5C 1F 15 A1 23 6F A2 .'...q..1\...#o.
Client Thread, READ: TLSv1 Handshake, length = 13
*** CertificateRequest
Cert Types: RSA, DSS,
Cert Authorities:
*** ServerHelloDone
*** Certificate chain
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Random Secret: { 3, 1, 27, 159, 38, 131, 132, 24, 47, 148, 161, 90, 7, 39, 189, 28, 178, 156, 20, 151, 220, 192, 239, 182, 115, 234, 99, 225, 68, 250, 199, 173, 96, 181, 78, 180, 238, 37, 243, 72, 19, 91, 249, 11, 49, 83, 1, 150 }
Client Thread, WRITE: TLSv1 Handshake, length = 141
SESSION KEYGEN:
PreMaster Secret:
0000: 03 01 1B 9F 26 83 84 18 2F 94 A1 5A 07 27 BD 1C ....&.../..Z.'..
0010: B2 9C 14 97 DC C0 EF B6 73 EA 63 E1 44 FA C7 AD ........s.c.D...
0020: 60 B5 4E B4 EE 25 F3 48 13 5B F9 0B 31 53 01 96 `.N..%.H.[..1S..
CONNECTION KEYGEN:
Client Nonce:
0000: 45 09 62 F6 47 C3 B9 2C 56 60 0E 0B AB 4C 69 87 E.b.G..,V`...Li.
0010: 88 72 35 36 89 4B CA FE 70 D0 F0 5B C7 F6 AF CF .r56.K..p..[....
Server Nonce:
0000: 45 09 62 F7 3F 5D 30 49 62 FB A0 D7 3D 6E F6 0C E.b.?]0Ib...=n..
0010: 05 D1 5F C2 98 C1 00 B5 87 1A 96 AE 34 5C 38 FA .._.........4\8.
Master Secret:
0000: 0E 63 38 16 86 A1 84 72 33 2C D7 07 D7 C3 AC E0 .c8....r3,......
0010: AD 5B CD 3B 2E 2A 02 91 1E FE 17 97 4E 3B 56 C3 .[.;.*......N;V.
0020: 5D 0F 7A 99 90 0D 3D 4E 5F 39 C5 EB 6E AD DA 71 ].z...=N_9..n..q
Client MAC write Secret:
0000: 99 32 FA 60 0B 88 36 CD 88 02 D5 4A CA D2 A6 49 .2.`..6....J...I
0010: 69 60 42 B6 i`B.
Server MAC write Secret:
0000: 43 3F 85 72 FB 6D 28 1C BA 1E 8A 26 56 DE 18 FB C?.r.m(....&V...
0010: 01 83 20 7F .. .
Client write key:
0000: 6F 58 29 AB B3 8C F5 75 3C 70 04 DF 9D 01 43 F5 oX)....u<p....C.
Server write key:
0000: 4A D7 E9 63 53 32 78 DF E0 99 89 60 A4 1A 3C E7 J..cS2x....`..<.
Client write IV:
0000: 24 FB 0E 12 AB D2 70 6D 80 B1 B2 BC 78 1A 55 88 $.....pm....x.U.
Server write IV:
0000: E4 75 62 25 46 95 0F 7A 44 16 E2 39 38 AD 29 CD .ub%F..zD..98.).
HawkEye Client Thread, WRITE: TLSv1 Change Cipher Spec, length = 1
*** Finished
verify_data: { 98, 254, 245, 75, 252, 23, 91, 164, 67, 197, 69, 44 }
Client Thread, WRITE: TLSv1 Handshake, length = 48
Client Thread, READ: TLSv1 Alert, length = 2
Client Thread, RECV TLSv1 ALERT: fatal, handshake_failure
Client Thread, called closeSocket()
Client Thread, handling exception: javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
Error: Received fatal alert: handshake_failure
Thread-4, handling exception: javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure

UC560 ssl vpn with spa525g failed

Dear all,
I configured spa52g phone as remote phone when it is connected to uc560 vpn is showing on display. but when i disconnect and try to connect from other network it giving error failed to obtain webvpn cookie.
The public ip is natted through firewall on wan interface of uc560 .

Hello,
Please refer to the following post for the fix regarding this issue: https://supportforums.cisco.com/docs/DOC-18980
Thanks,
-john

Certificate authentication for Cisco VPN client

I am trying to configure the cisco VPN client for certificate authentication on my ASA 5512-X. I have it setup currently for group authentication with shared pass. This works fine. But in order for you to pass pci compliance you cannot allow aggresive mode for ikev1. the only way to disable aggresive mode (and use main mode) is to use certificate authentication for the vpn client. I know that some one out there must being doing this already. I am goign round and round with this. I am missing some thing.
I have tried as I might and all I can get are some cryptic error messages from the client and nothing on the firewall. IE failed to genterate signature, invalid remote signature id. I have tried using different signatures (one built on ASA and bought from Godaddy, and one built from Windows CA, and one self signed).
Can some one provide the instructions on seting this up (asdm or cli). Can this even be done? I would love to just use the AnyConnect client but I believe you need licensing for that since our system states only 2 allowed. Thank you for your help.

Dear Doug ,
          What is asa code your are running on ASA hardware , for cisco anyconnect you need have Code 8.0 on your hardware with cisco anyconnect essential license enabled .Paste your me show version i will help you whether you need to procure license for your hardware . By default your hardware will be shipped with any connect essential license when you have order your hardware with asa code above 8.0 .
With Any connect essential you are allowed to use upto total VPN peers allowed based on your hardware
1) What is the AnyConnect Essentials License?
The Anyconnect Essentials is a license that allows you to connect up to your 'Total VPN Peers" platform limit with AnyConnect. Without an AnyConnect Essentials license, you are limited to the 'SSLVPN Peers' limit on your device. With the Anyconnect Essentials License, you can only use Anyconnect for SSL - other features such as CSD (Cisco Secure Desktop) and using the SSLVPN portal page for anything other than launching AnyConnect are restricted.
You can see your limits for the various licensing by issuing the 'show version' command on your ASA.
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Enabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
Any connect VPN Configuration .
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml

How to revoke machine certificates quickly?

We are planning to start using device certificates for the first time for the following purposes:
Exchange ActiveSync certificate based authentication.
Wireless authentication for laptops that are not members of our domain.
System Center Configuration Manager Internet based clients to authenticate from the Internet through a reverse proxy to receive Windows and software updates.
Allow Chromebooks to authenticate to Cisco ASA L2TP with IPSEC VPN with device certificate instead of PSK.
If any of the devices or certificates get stolen, we would need to revoke the certificates so the devices can no longer authenticate.
I have already seen links that give steps on how to revoke the certificate on the issuing CA server, but how to you make this change happen right away? If we go through the steps to revoke the certificate, how can we make sure the devices that are
providing the certificate authentication (RADUIS server for wireless and for VPN, reverse proxy, SCCM, Exchange etc.) know the certificate is revoked and immediately stop allowing connections?

Certificate revocation is not an immediate process. At first, you need to disable computer account in Active Directory and/or edit VPN connection policies.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

SSL VPN Client Error

I setup a Cisco ASA 5510 SSL VPN with the folowing;
IOS 7.2
SSL VPN CLient sslclient-win-1.1.1.164.pkg
Out of 400 users, there is one user having problem installing the SSL Client to his laptop. The user laptop information is;
IBM Thinkpad T40
Windows XP SP 2
Internet Explorer 7
All patches up-to-date
All drivers up-to-date
SSL VPN Client connection process;
- User login with valid account and password
- The SSL VPN Client package will automatically download and installed.
- User will then be connected to SSL VPN
The ERRORS;
1. GUI (Cisco SSL VPN Client installation process)
"The SSL VPN Client driver has Encountered an Error"
2. Event Viewer
The only error in this user event viewer that differs from other users who successfully connected are;
a)
Function: EnableVA
Return code: 0
File: e:\temp\build\workspace\SSLClient\Agent\VAMgr.cpp
Line: 310
Description: unknown
b)
Function: EnableVA
Return code: 0xFE080007
File: e:\temp\build\workspace\SSLClient\Agent\VpnMgr.cpp
Line: 1145
Description: VAMGR_ERROR_ENABLE_VA_FAILED
Anyone know what thus the error means?
BTW, anyone know the link to SSL VPN knowledgebase. i.e errors, root cause, solutions?
Thanks

The Cisco SVC provides end users running Microsoft Windows XP or Windows 2000 with the benefits of a Cisco IPSec VPN client without the administrative overhead required to install and configure an IPSec client. It supports applications and functions unavailable to a standard WebVPN connection.
http://www.cisco.com/univercd/cc/td/doc/product/vpn/svc/svcrn110.htm

IOS SSL VPN problem

I am implementing a SSL VPN with IOS version 12.4(13r)T5 on a 2801 but when I try to connect to the tunnel mode with the latest svc (anyconnect-win-2.2.0133-web-deploy-k9.exe) with https://1.2.3.4/tunnel the ssl vpn client can't connect.
The error on the router is:
Jun 5 16:07:55.755: WV: Appl. processing Failed : 2
Jun 5 16:07:55.755: WV: server side not ready to send.
The following is the configuration:
ip local pool WEBVPN 10.0.0.140 10.0.0.150 group vpn2
webvpn gateway ISR2801-RM
hostname ISR2801-RM
ip address 1.2.3.4 port 443
ssl trustpoint TP-self-signed-50153718
inservice
webvpn install svc flash:/webvpn/svc.pkg
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context vpn1
ssl authenticate verify all
url-list "eng"
url-text "wwwin-eng" url-value "http://wwwin-eng.cisco.com"
policy group vpn1
url-list "eng"
default-group-policy vpn1
gateway ISR2801-RM domain clientless
inservice
webvpn context vpn2
ssl authenticate verify all
policy group vpn2tunnel
functions svc-enabled
svc address-pool "WEBVPN"
svc split include 10.0.0.2 255.255.255.255
default-group-policy vpn2tunnel
gateway ISR2801-RM domain tunnel
inservice

Thanks for the reply !!!!
the configation is the following:
interface Ethernet 0
ip address 10.0.0.128 255.255.255.0
ip http secure-server
ip local pool WEBVPN 10.0.0.140 10.0.0.150 group policy-sslvpn2
webvpn gateway ISR2801-RM
hostname ISR2801-RM
ip address 1.2.3.4 port 443
ssl trustpoint TP-self-signed-50153718
ssl encryption aes-sha1
inservice
webvpn install svc flash:/webvpn/svc.pkg
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context context-sslvpn1
ssl authenticate verify all
user-profile location flash:webvpn/sslvpn/context-sslvpn1/
url-list "eng"
url-text "wwwin-eng" url-value "http://wwwin-eng.cisco.com"
nbns-list cifs-servers
nbns-server 172.16.1.1 master
nbns-server 172.16.2.2 timeout 10 retries 5
nbns-server 172.16.3.3 timeout 10 retries 5
login-message "UNAUTHORIZED ACCESS TO THIS NETWORK DEVICE IS PROHIBITED. You must have explicit permission to access this device. All activities performed on
this device are logged and violations of this policy may result in disciplinary action."
port-forward "portlist"
local-port 30019 remote-server ssh-server remote-port 22 description SSH
local-port 30020 remote-server mailserver remote-port 143 description IMAP
local-port 30021 remote-server mailserver remote-port 110 description POP3
local-port 30022 remote-server mailserver remote-port 25 description SMTP
policy group policy-sslvpn1
url-list "eng"
port-forward "portlist"
nbns-list "cifs-servers"
functions file-access
functions file-browse
functions file-entry
citrix enabled
default-group-policy policy-sslvpn1
gateway ISR2801-RM domain clientless
inservice
webvpn context context-sslvpn2
ssl authenticate verify all
user-profile location flash:webvpn/sslvpn/context-sslvpn2/
policy group policy-sslvpn2
functions svc-enabled
svc address-pool "WEBVPN"
svc keep-client-installed
svc dpd-interval gateway 30
svc dpd-interval client 300
svc rekey method new-tunnel
svc rekey time 3600
svc split include 10.0.0.0 255.255.255.0
svc default-domain cisco.com
svc dns-server primary 192.168.3.1
svc dns-server secondary 192.168.4.1
default-group-policy policy-sslvpn2
gateway ISR2801-RM domain tunnel
inservice
ISR2801-RM#show webvpn install status svc
SSLVPN Package SSL-VPN-Client version installed:
CISCO STC win2k+
2,2,0133
Mon 05/19/2008 12:58:52.34 v
ISR2801-RM#
WHEN I TRY TO CONNECT TO THE SSL CONTEXT 2 with a client
https://1.2.3.4/tunnel
* the ssl client installed on the pc tell me can't connect.
* on the router the log:
Jun 6 10:28:08.283:
Jun 6 10:28:08.283:
Jun 6 10:28:08.283: WV: Entering APPL with Context: 0x6AA85130,
Data buffer(buffer: 0x6C4B4280, data: 0xF5C043D8, len: 560,
offset: 0, domain: 0)
Jun 6 10:28:08.283: CONNECT /CSCOSSLC/tunnel HTTP/1.1
Jun 6 10:28:08.283: Host: host4-234-static.105-80-b.business.telecomitalia.it
Jun 6 10:28:08.283: User-Agent: Cisco AnyConnect VPN Agent for Windows 2.2.0133
Jun 6 10:28:08.283: Cookie: webvpn=00@1566900393@00025@3421729574@3982902438@context-sslvpn2
Jun 6 10:28:08.287: X-CSTP-Version: 1
Jun 6 10:28:08.287: X-CSTP-Hostname: telefonicadata
Jun 6 10:28:08.287: X-CSTP-Accept-Encoding: deflate;q=1.0
Jun 6 10:28:08.287: X-CSTP-MTU: 1406
Jun 6 10:28:08.287: X-CSTP-Address-Type: IPv6,IPv4
Jun 6 10:28:08.287: X-DTLS-Master-Secret: 27EA2210E377A9E039E458FA604F523C69BEB2BF8D9B40334F72C9F424B83EE26C6D5D57D0F84419DC7A1139D3F08EE9
Jun 6 10:28:08.287: X-DTLS-CipherSuite: AES256-SHA:AES128-SHA:DES-CBC3-SHA:DES-CBC-SHA
Jun 6 10:28:08.287:
Jun 6 10:28:08.291:
Jun 6 10:28:08.291:
Jun 6 10:28:08.291: WV: Appl. processing Failed : 2
Jun 6 10:28:08.291: WV: server side not ready to send.
SSLVPN sock pid 182 sid 161: closing

Any idea on F5 SSL VPN plug in?

I'd like to run F5 SSL VPN with Ubuntu 14.04. any suggeston on this plug in? It is suggested that this plug in is compatiable with 32 bit firefox, not 64bit firefox.. Any suggestion is much appreciated.

You may get some better answers from the linux mailing group: [https://lists.mozilla.org/listinfo/community-linux]
* Add on search[https://addons.mozilla.org/en-US/firefox/search/?q=F5+SSL+VPN&platform=linux&appver=any]

6.1 SP 2 certificate authenticator fails with Apache plugin and SSL

Hi,
Does anybody have a certificate authenticator working in WebLogic 6.1
SP 2, in combination with the Apache HTTP Server plugin and SSL?
We implemented a certificate authenticator that works correctly in
WebLogic 6.1 SP 2 when we configure SSL with "Client Certificate
Required", and access it directly from a browser (the browser hits the
SSL port of the WebLogic server, like 7002).
This certificate authenticator also works correctly with a proxy web
server. We set up a Stronghold server (web server based on Apache) on
Linux with the Apache HTTP Server plugin from BEA, configured the
plugin to use SSL, and configured our WebLogic 6.1 SP 1 server without
"Client Certificate Required". The certificate authenticator gets the
end user's certificate correctly.
This same architecture with the proxy web server does not work when we
upgrade the WebLogic Server to SP 2. WebLogic Server logs the
"incorrect or missing client cert" error, our certificate
authenticator is never called, and the browser gets a 401 Unauthorized
error.
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). So it appears to us that the plugin encodes the
certificate in the request header in such a way that a SP 1 server can
extract it, but an SP 2 server cannot. We were wondering whether
there might be changes to the plugin to stay in step with the SP 2
server that never got ported to Linux, or whether an updated Linux
plugin never got included in the installer packages.
So: has anybody gotten a system like
Apache/Stronghold + WebLogic Plugin <-- SSL --> WebLogic 6.1 SP 2 +
Cert Auth
to work?
Thanks in advance for any help,
Jim Doyle
[email protected]

A correction, I think:
Now that I rolled back a system to 6.1 SP 1, it looks like 6.1 SP 1
does include a different mod_wl_ssl.so from that in SP 2. I believe I
was comparing the wrong file. In fact, trying to compare versions of
the mod_wl_ssl.so makes things rather confusing:
A mod_wl_ssl.so from a straight weblogic610sp2_generic.zip install has
a cksum of "1853014778 1132467".
A mod_wl_ssl.so from a weblogic610sp1_generic.zip install with a
subsequent SP 2 upgrade install has a cksum of "1350917183 1147927".
A mod_wl_ssl.so from a plain 6.1 install with subsequent SP 1 and SP 2
upgrade installs, followed by an SP 2 uninstall and another SP 1
upgrade install, has a cksum of "1471948065 1136501".
I think I may be looking at three different plugin versions here: 6.1,
6.1 SP 1, and 6.1 SP 2, assuming the upgrade installs don't actually
change mod_wl_ssl.so. I'm not sure whether there's an easier way to
verify what version of the plugin you have.
In any case, we did try each plugin version, and none of them works
against a 6.1 SP 2 WebLogic server.
Jim
[email protected] (Jim Doyle) wrote in message news:<[email protected]>...
[snip]
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). [snip]

SSL VPN with machine certificate authentication

Similar Messages

Maybe you are looking for