ADF BC adapter SDO error

I have BPEL. i want to use ADF BC adapter. so creating SDO. Jdev 11.1.1.4
I created a new ADF BC project
Want to use ADF BC - SDO so go thru Generate ADF BC from Tables" wizard. when I go to "Create Service Interface" wizard, it keeps complaining about one of the Date filed i have in table and just not complete the SDO creation atall
"Java type oracle.jbo.domain.Date" referenced by FlightDate is currently not supported" this is what it keeps showing in the wizard popup.
what is this error and why it keeps be away from creating SDO ? how to get rid
thx
dd

Hi,
can you change the attribute type in the EO editor from "Date" to "Timestamp" ? Make sue the change is reflected in the VO
Frank

Similar Messages

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerExce

I have configured two B2B trading partner over ebMS communication. I have also configured an internal delivery channel using JMS.I am posting a msg(the Tp identification is through duns no.) on the JMS queue and I am not able to receive it on the Tp side and i am getting the following error
008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
2008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5426)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
I am able to recevie the Heased but not the payload
     ... 5 more

Hi,
":" - has been used as default separator so if you identifier holds this value, please enable add the tip.properties entry as below and things should be fine.
oracle.tip.adapter.b2b.partyTypeAndValueSeparator=#.
Here's a sample for jms enqueue,
FROM_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#232510151
TO_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#123456789
Just replace the "FROM_PARTY" and "TO_PARTY" as "from" and "to" for AQ.
Thanks,
Sinkar
[From Ramesh Team]

SRFC-adapter and file adapter with error: no adapter found

Hello,
we have two scenarios here in an XI 3.0 SP12:
First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
Second scenario uses file adapter to send file from A to B.
When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
Same problem for file adapter!
Here is the message from the file adapter error log entry in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.kx1.test038</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Looks like an identical problem for both adapter.
What we have done (checked) so far:
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active, file adapter active)
- Component monitoring: no errors, adapters are fine
- all rfc connections checked: ok
- have checked user and pwd and replaced to be sure
- cache refresh: ok
- reimport of SWCV to IR for RFC: done, no result
Does anybody have an idea, how to get rid of that?
Best regards
Dirk

Hello Udo,
in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
I think this is a really tricky one!
Best regards
Dirk

Error in Inbound B2B: AIP-50031: B2B adapter general error: java.lang.Null

Hi,
I am getting the following error in inbound B2B - Custom Document over Generic Exchange - SFTP
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1900)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2657)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2527)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
]]>
The outbound B2B is working fine; however for the inbound file transfer the file is picked up from the trading partner and this exception occurs.
Thanks

Please paste more log in trace 32 mode. What is the name of the file you are receiving? By default B2B expects incoming filename as -
<FromTPName>UniqueId.<anyFile_Extn>
For e.g., if partner MarketInc is sending the file then it's name should be - MarketInc_12345.dat or MarketInc_34567.xml
Make sure that listening channel is not marked as internal as well.
Regards,
Anuj

BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite

Hi,
I am just testing one simple SOA Application in SOA 11g Suite. Created a SOA Composite Application with one DB Adapter at designtime all worked fine with DB Adapter. But when I deploy the Application on the server I get the following error:
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/soademoDatabase'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/soademoDatabase. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ".Do I need to jndi-name in weblogic-ra.xml if so what is the exact location. Any help is appreciated.
Thanks

I did but still not able to connect now getting the following error. I went to the Weblogic Console, clicked on deployments, selected DBAdapter, clicked on configuration ,
and then I don't see outbound configurations instead it shows Outbound Connection Pools, Under Outbound Connection Pools tab I clicked on New and it asked to select Outbound Connection Group I selected the one that was already there (with JNDI eis/DB/SOADemo) and then created my JNDI which was added to the default Outbound Connection Group and in the end it asked to save the Plan.xml which I saved it under a new directory created under soa directory. But still am not able to connect.
How do I create my own Connection Group as don't want to use the defualt one out there.
After creating the JNDI Name it asks for saving the Plan.xml file. Where exactly we save this file. Are there any standards.
Why can't I update any properties when I click on the new JNDI name it takes to Settings for javax.resource.cci.ConnectionFactory --> Outbound Connection Properties but there I see a save buttn but I can't make any changes.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception. Missing Property: [DBManagedConnectionFactory.userName]. You may have set a property (in _db.jca) which requires another property to be set also. Make sure the property is set in the interaction (activation) spec by editing its definition in _db.jca. . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. Is there any documentation that lists all these steps as I couldn't find it anywhere. The guide only talks abou DBAdapter but how to configure etc can't find any info. Any help is appreciated.
Thanks.

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

ADF-BC Adapter

Hello friends,
How can I perform CrUD operations by using ADF-BC Adapter. I tried it and created the Model Application of ADF-BC but don't know how to deploy it on web logic to get it's WSDL location which will later used in ADF-BC Web service?
I am assuming that after creating ADF-BC Model it will be deployed on Web Logic Server before creation of Composite (with ADF-BC Adapter). Please clarify and share any tutorial.

Hi,
can you change the attribute type in the EO editor from "Date" to "Timestamp" ? Make sue the change is reflected in the VO
Frank

AS2 Adapter in error

Hello,
I have got an error in AS2 adapter.
Error message is as shown below :
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: org.apache.commons.httpclient.ProtocolException: Unbuffered entity enclosing request can not be repeated. # , SEEBURGER AS2: org.apache.commons.httpclient.ProtocolException: Unbuffered entity enclosing request can not be repeated. #
we are struggling for this error for quite few days.
Can anyone help me out what we can check in this ?? what could be a possible cause for same??
Thanks a lot in adavance !!!
Regards,
Vikrant

Hi Vikrant
Just have alook at this thread may get some clue ..
Seeburger AS2 Adapter sending message error
Re: Error in AS2 RCV adapter.. SEEBURGER AS2: 307 Temporary Redirect #
Regrds
Abhishek

IDoc Adapter throws error

We are trying to send data to SAPR/3 47 IDES using IDoc Adapter.
the data is sent to XI from SQL database thro JDBC adapter and then to R/3 thro IDoc adapter.
All this is in Asynchronous mode and at no point we chose synchronous (IDoc adapter does not suppost Asynchronous process right).
But we are getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>B7685EB2-42F1-554B-80CC-6ADFC86C7975</SAP:MessageId>
<SAP:RefToMessageId>35A42550-81F9-11D9-AFC7-00C09F450580</SAP:RefToMessageId>
<SAP:TimeSent>2005-02-18T22:05:33Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>S70_812</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">DEBMAS.DEBMAS04</SAP:Interface>
</SAP:Sender>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_BE_NOT_SUPP</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Only asynchronous processing supported for IDoc adapter outbound processing</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
We are not sure where from this synchronous is being picked?
Please advise.
Thanks,
Bhaskar and Anil

In the Processing Parameters section of the JDBC adapter, make sure you have Exactly Once (Asynchronous) selected.

PLAIN HTTP ADAPTER -ATTRIBUTE_SERVER ERROR

Hi,
I am facing the following error while using HTTP Receiver adapter,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Help me to solve this problem

Hi Prabu,
You should be using adapter type XI to connect to the receiver SAP system and not HTTP. Define an RFC connection from XI to that SAP system (SM59 use type HTTP connection to ABAP system) and use that RFC connection name in you XI receiver communication channel.

Abap tables for adapter engine errors

Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLS

Hello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS

"B2B adapter general error"

I had an inbound EDI document fail with a"B2B adapter general error".
I have never seen anything like this error -- and there are no details in the b2b log.
This type of doc processes inbound to B2B hundreds of times daily, and the EDI looked valid.
I re-dropped the same file to B2B and it went thru successfully.
Has anyone ever seen this error ? Any ideas on what I should be looking at to prevent this from happening again ?
Thanks,
Alice

Hello,
This is just a guess from my side. You may need to run the post installation script to set the curson and other few db params. I shall send you the script to your email id. Please send a test mail to me.
Rgds,Ramesh

RFC Adapter Receiver Error

Hi Guys,
I am getting below error in RFC Receiver Adapter Level Error. is showing as Adapter Level Status as "WAITING" , with below error.
Can any one pls help me on this. if i resend the message from RWB will it works...?
Warning Adding message to blacklist. Reason: message, which is in delivering state, is reassigned.
Warning Message added to blacklist
*MP: exception caught with cause
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: Out of memory error occurred while processing message at RFC receiver*
Error Adapter Framework caught exception: Out of memory error occurred while processing message at RFC receiver
Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: Out of memory error occurred while processing message at RFC receiver.
Thanks,
Siva.

Hi Naveen,
How i will increae heap memory ? can u pls expalin me step by step..
Earlier the above message error shwing as "WAITING" sattus with above error..its posted duplicate message ( multiple messages 2 times) in target system..
actually this meesge "WAITING" ststus in Runtime workbench - Adapter Engine on 1st march 2012, but its posted on same day and next day 2nd march 2012 on 4PM PST ( That means 5-30 AM IST ).
This is File 2 Rfc Interface..
Can any one pls expalin me why it posted double times..? any clue..? pls help me on this...
Regards,
Siva.
Edited by: siva38 on Mar 7, 2012 2:27 PM
Edited by: siva38 on Mar 7, 2012 2:49 PM

ADF-BC Adapter Documentation Guide

Hi All,
can anyone share any link about ADF-BC Adapter configuration?
what is "RegistryName" in ADF-BC Adapter?
Any suggestion would be helpful to me.
Thanks,
Sharmistha

Hi,
can you change the attribute type in the EO editor from "Date" to "Timestamp" ? Make sue the change is reflected in the VO
Frank

ADF BC adapter SDO error

Similar Messages

Maybe you are looking for