SSO and ITS
Hello,
We are trying to setup SSO for SAP System. Our architecture looks like this:
3rd party logon mechanism(via web) --> ITS --> Web Dispatcher --> WAS (BSP's)
We did extensive research and found that ITS might enable us to do that. But we are not clear if SNC is a must (Which we don't want to do). The documenation is not clear. The current URL without SSO points to Web Dispatcher which get us the bsp pages from the WAS.
Following is what we want to achieve:
1. Users will logon to the 3rd party logon mechanism via web(software is installed with APACHE 2.0)
2. once users are authenticated we need to pass the ID via HTTP header or any other method available to logon to SAP BSP Pages.
Currently users can logon to 3rd party software which redirects to the BSP application and requests user id and password.
We are wondering if anyone has done this sort of setup.
Thanks,
Hi
For SSO concept visit (You can also find usage in EP)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90277dbd-0401-0010-33a1-ac2c7e3a5659
<b>Usage across portal:</b>
Normally Portal provides you a page which has content from different backend applications. Portal actually provides single point of entry to these applications which reside outside Portal. Now with Single SingOn feature user does not have to logon to backend application again. That means when he clicks a link on Portal which points to Backend application, he does not have to enter user and password again for that application.
for more info
sso
Some fundas related to SSO with portal
What is meant by "SSO across multiple domains"
some usefull blog
Step-By-Step Guide to implement Application Integrator
Hope that helps
Similar Messages
-
We are implementing ESS MSS on 4.7 , ITS 4.7 with EP 6.0
Can some one point me as to how to configure the SSO between these various landscapes. I Think we would require SSO between EP and ITS for ESS in MSS services.
regards
Sam
Message was edited by:
sameer chilamaHi Sameer,
All the information you are looking for is in the help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8e1af2f11d5993700508b6b8b11/frameset.htm
This help guide is really very clear and thorough.
Regards
Daniel -
SSO between ITS 620 R/3 and EP
Hi,
I need to use ITS 620 for R/3 4.7 and EP 6.0 for ess/mss implementation
I have to configure SSO between R/3 and EP.
Do I also need to configure SSO between ITS and R/3 , ITS and EP also for this?
If yes can any one tell me the steps in configuring SSO between ITS and R/3, ITS and EP ?
advance thanks,
PKUPDATE:
I have installed a portal (SAp netweaver 7.0 Java stack) and have connected it to a ECC6.0 SR3 backend and I needed only to configure the SSO between portal and backend abap instance, and all worked fine. There was no need to configure the SSO between the integrated ITS and abap instance.
About the error message mentioned in my previous forum entry:
I did not only do the steps for SSO between portal and backend as described in the blog "Configuring the Business Package for Employee Self-Service (ESS)", but I also did all the additional steps as mentioned in "10 golden rules of SSO".
After that the error message "SSO logon not possible; logon tickets not activated on the server" did not appear anymore. (Instead a screen that asks for username and password always appears with the warning "No switch to HTTPS occurred, so it is not secure to send a password". But I think that's ok.) -
Hello,
I try to establish a single sign on connection from our portal to an its instance.
The portal version is 6.0 SP2 PL31
The ITS is 6.20 PL 17
My problem is that when I call a certain transaction via the ITS URL I always get the logon screen...
When I call a transaction by using the sap transaction starter I am immediately connected without login, but the transaction starter is using the sap gui...
I set the parameter ~mysapcomusesso2cookie 1 in the global.srvc; when I trace my html stream I can see that the SAP Logon Ticket arrives at the ITS, but I always get the logon screen.
I searched the forums for similar problems, but could not find a solution...
thanx for your help
PhilippFor what it's worth, I was about to post the very same problem! The problem also occurs with ITS PL16. We had this functionality working last year with EP6 SP2 P4 HF6 and ITS 620 PL7 - obviously something has changed in the patches from then until now.
I have found that using an IAC iView works OK, but trying to use a URL-based iView does not (both portal and ITS server are in the same DNS domain, all the usual stuff). We have to use a URL-based iView because our IAC will not run in an iFRAME as the portal launcher insists on doing.
- Darren -
User assgined to a group, SSO to ITS is not working
We had our security group add a ESS-User group. We imported 500 users and assigned them to that group. When logging into EP, we are getting access to the correct tabs, but ITS is requiring us to login.
But when logging in as a user that is not assigned to this group, the SSo to ITS is working.
What setup step are we missing? Are we supposed to configure something in Visual Administrator.Hi Dena,
A logon trace might provide the cause of the problem. See SAP note 495911 for starting.
Thanks and regards,
Dieter -
SSO to ITS through WebSEAL gives secure/non-secure messages
Hi
We running the following setup:
EP6 SP14
Stand-alone ITS 6.20 patch 18
4.7 R/3 Enterprise
TAM/WebSEAL 5.1
We are running SSO through WebSEAL to the portal and everything seems to be working just fine.
But when we try to access a transactional iView or an IAC iView running on the ITS server I get a pop-up message saying "This page contains both secure and nonsecure items."
We are accessing WebSEAL through HTTPS, we are running HTTPS between WebSEAL and the portal and HTTP between WebSEAL and ITS.
I have tried to access the ITS through WebSEAL without using the portal, and I still get the message. So it must be something between the WebSEAL and the ITS server.
Does anybody have any ideas what is causing this?
Cheers,
Jacob VennervaldThe "secure and non-secure" message, displayed when accessing ITS through WebSEAL when using IE and HTTPS, is caused by an empty source reference (<IFRAME ... SRC="" ...>) within the ITS menu page (...d_menu.html).
The integration guide, available on the <a href="http://www-1.ibm.com/support/docview.wss?uid=swg24003605">IBM website</a> and the <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/ibm">SAP SDN</a>, contains the information on how to stop the message from appearing.
The message should not be displayed when accessing ITS through WebSEAL using HTTP.
Regards,
Peter Tuton. -
APEX SSO and Load balancing: Could not determine workspace for application
We had a single HTTP Server serving APEX in a 10.2.0.2 database configured with SSO to be used by the developers. APEX has been registered as a partner application and the login url has been CA Siteminder protected so that the SM_USER details are forwarded in the header for the application to use for authorization. Everything is fine so far.
Now we have added a HTTP Server on another host and have it all set up for APEX and its pointing to the same database. APEX_ADMIN access works as normal, but applications previously using SSO now get the following error after entering the URL.
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
Using HTTP Watch I find that the application is not even trying to redirect to the login page.
What is wrong here?APEX has been registered as a partner application as described in
http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
In the meantime I found metalink document 368746.1 which describes the cause of this problem. Please read carefully what I wrote, it all works when the the new APEX web server is turned off in the server farm on the load balancer and directed through the original web server. When running regapp.sql the hostname in the listener token was using the virtual hostname. This works fine if the request comes from the original APEX server which proofs that there is nothing wrong with the installation and set up of SSO. When directing the request to the new APEX web server the APEX_ADMIN page still works only existing work spaces using SSO don't seems to work anymore resulting in a error as described in the subject.
As for metalink document 368746.1 naming the causes of this error:
- there are no duplicate entries in WWSEC_ENABLER_CONFIG_INFO$
-LISTENER_TOKEN clearly works for requests coming from the first web server
-theoretically the web server listener port could be changed from 7777, but port 80 needs to be maintained here as production is mimiced as far down as possible.
Is there some cache table which can be cleared? How is it that the flows schema (apex engine) can not find the work space when the request comes from a new web server which can however access the APEX_ADMIN pages.
anyone? -
I am opening this thread on behalf of my colleague Bala regarding SSO and ABAP Web Services.
We have gone through single sign on options and found several options are available within 5.0.
We would like to know the options available for SAP ABAP web services access from a Non-SAP system with user authorization but without Portal/ITS installation.
Also I would like to avoid any hard coding of user id in Non-SAP system .
Could you provide any information.
Thanks,
BalaWe have gone through single sign on options and found several options are available within 5.0.
Tell me what are the several options and what is your Non-SAP system?
without Portal/ITS installation.
ITS is now an integral part of ECC 5.0 system. So would not need a seperate installation, unlike earlier versions.
AB -
Configure SSO for ITS to R/3 using SNC/Kerberos
Our R/3 systems had been configured for SSO using SNC and Kerberos for awhile now. We now have a requirement to configure SSO between ITS and R/3. Since our R/3 env. has been using kerberos library, we won't be able to use SAP Cryptographic library. I had modified the registry, environment and services in itsadmin to point to the kerberos library and principal names for agate and r/3 servers as described in SNC User Guide; also, I updated table SNCSYSACL with the Agate SNC name. That seems to work fine. From the trace file, it recognized GSS-API library for Kerberos and the SNC name for Agate. However, when I tried to logon to R/3 from ITS, I still am being prompted with the logon screen to enter my SAP account/password.
I found several whitepapers and documentations stating that ITS does support Kerberos for SSO but I couldn't find any procedure on how to implement it. Following is the error I'm getting from the sapbasis.trc file but I can't find any document on this error:
=====================================================
[Thr 5284] SncInit(): Initializing Secure Network Communication (SNC)
[Thr 5284] PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
[Thr 5284] SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "C:\WINNT\system32\gsskrb5.dll".
[Thr 5284] File "C:\WINNT\system32\gsskrb5.dll" dynamically loaded as GSS-API v2 library.
[Thr 5284] The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
[Thr 2888] Sun Jan 15 22:44:59 2006
[Thr 2888] <<- ERROR: SncSetParam()==SNCERR_PARAM_DENIED
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
[Thr 2888] Sun Jan 15 22:45:29 2006
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
=====================================================
Does anyone know what am I missing? Any help is greatly appreciated.
Thank you!
DiemHi Markus,
I also just installed/configured PAS for LDAP authentication using the "PAS for External Authentication Mechanisms" documentation. I think the domain problem probably due to not having the external authentication mechanism install (in this case - PAS). Does that sound right to you?
I tried both options for ~extid_type parameter = "LD" and "UN". I added the DN information to table USREXTID when ~extid_type="LD" but both options gave me error of "LDAP authentication failed". I increased the trace level for sapextaut.trc but I don't see enough detail information. Following are the errors/data from the trace file. Can you please let me know how I can tell what string is being passed for authentication?
I'm quite sure the LDAP host and port data is correct since we've been using the same information for the SAP LDAP connector and we've been using our LDAP connector between MS AD and R/3 for a long time without any problem.
To logon to R/3 through ITS, I entered the AD account (CN attribute in AD) when I got the errors.
Thank you very much for all your help.
Diem Tran
Trace:
=====================================================
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 437]: W sapextauth: PAS session begins...
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 456]: sapextauth: SncNameR3 is: "p:na1adm/[email protected]"
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 462]: sapextauth: SncNameAGate is: "p:[email protected]"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 468]: sapextauth: SNC_LIB is: "C:\WINNT\system32\gsskrb5.dll"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 568]: sapextauth: XGatConnectSession leaving....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 993]: W Either ~login or ~password missing, returning XGDKRCloginrequired.
2006-01-18T01:39:50.281 p001688 t4992 s00000000 [sapextauth, 398]: sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1059]: sapextauth: LDAP port ist 389
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
2006-01-18T01:39:59.140 p001688 t4992 s00000000 [sapextauth, 398]: sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 616]: sapextauth: XGatHandleLogin called....
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 976]: sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1059]: sapextauth: LDAP port ist 389
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
======================================================= -
Setup and Configure IM Components SSO and DAS on Replica RMS Node
Dear All,
I was trying the step
Step 5: How to Setup and Configure IM Components SSO and DAS on Replica RMS Node In Multimaster Replication (MMR) with Identity Management (IM) Cluster in High Availability Env
But, at the stage to connect to OID, it is not connecting to the RMS database.
When I checked login through ODM, it is connecting fine. also, ldapbind is also binding fine.
How to solve this ? What will be the issue and where to check it ?
Also, from the RMS, when I am connecting through EM console, I am not getting any output on Infrastructure link to change the passwords. its showing
Identity Management
Error retrieving information of default metadata repository.
Unable to establish secure connection to Oracle Internet Directory Server ldap://devportal.paaf.gov.kw:636/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
If there is any experts, pls reply. Because, last time I created a TAR and it took months to resolve and ultimately nothing happened they closed the TAR after some time as I was busy with some other works and not able to proceed with the synchronization.
Thanks in advance,
With Regards,
Sheeja AnilRule [ 47 ]: fuser link
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the fuser symbolic link /sbin/fuser -> /bin/fuser exists or
not. This is required for Suse 8.0 and Suse 9.0.
Test [ PASSED ] :
Not required =~ Exists|Not required
Action:
fuser link exists or not required.
Rule [ 48 ]: orarun package
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the orarun package is installed and if the oracle user
environment need to be reset. This is only required for Suse 8.0 and
Suse 9.0.
Test [ PASSED ] :
Not applicable =~ Not installed|Installed correctly|Not
applicable|Environment reset not required
Action:
orarun is not installed or installed correctly.
Rule [ 49 ]: semmsl
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmsl kernel parameter is 256 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmsl kernel parameter is 256 or higher.
Rule [ 50 ]: semmns
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmns kernel parameter is 32000 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmns kernel parameter is 32000 or higher.
Rule [ 51 ]: semopm
~~~~~~~~~~~~~~~~~~~
Description:
Check if semopm kernel parameter is 100 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semopm kernel parameter is 100 or higher.
Rule [ 52 ]: semmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmni kernel parameter is 142 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmni kernel parameter is 142 or higher.
Rule [ 53 ]: shmall
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmall kernel parameter is 2097152 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmall kernel parameter is 2097152 or higher.
Rule [ 54 ]: shmmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmax kernel parameter is 2147483648 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmax kernel parameter is 2147483648 or higher.
Rule [ 55 ]: shmmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmni kernel parameter is 4096 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmni kernel parameter is 4096 or higher.
Rule [ 56 ]: msgmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmax kernel parameter is 8192 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmax kernel parameter is 8192 or higher.
Rule [ 57 ]: msgmnb
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmnb kernel parameter is 65535 or higher. Refer to Oracle
Application Server 10g Installation Guide 10g - Chapter 4 - Section
4.3.3 Configuring the Kernel Parameters on Linux for more details on
how to configure this.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmnb kernel parameter is 65535 or higher.
Rule [ 58 ]: msgmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmni kernel parameter is 2878 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmni kernel parameter is 2878 or higher.
Rule [ 59 ]: file-max
~~~~~~~~~~~~~~~~~~~~~
Description:
Check if file-max kernel parameter is 131072 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
file-max kernel parameter is 131072 or higher.
Rule [ 60 ]: ip_local_port_range
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if ip_local_port_range kernel parameter is between 10000 and
65000 or higher. For more details on how to configure this parameter,
refer to Oracle Application Server 10.1.2 Installation Guide - Chapter
4 - Section 4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
ip_local_port_range kernel parameter is between 10000 and 65000 or
higher.
Rule [ 61 ]: limit processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of max processes is set to 16384 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of max processes is set to 16384 or higher.
Rule [ 62 ]: limit descriptors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of file descriptors is set to 65536 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of descriptors is set to 65536 or higher.
Rule [ 63 ]: Port 1521
~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if port 1521 is free or not. If port 1521 is used by an Oracle
listener version 10.1.0.2 or later, then the existing listener will be
used by the existing database and the Oracle Application Server 10g
Metadata Repository. The installer will perform this configuration
automatically. If port 1521 is used by an Oracle listener version
earlier than 10.1.0.2, then the existing listener need to be stopped.
After the installation is complete, the new 10.1.0.2 listener can be
configured to listen to the existing (pre 10.1.0.2) databases. If port
1521 is used by non-oracle programs, then this program need to be
configured to listen to ports other than 1521. Refer to Installation
Guide, section 4.4.4 for more details.
Test [ PASSED ] :
TNS Listener 10.1.0.2 or higher is running =~ TNS Listener 10.1.0.2 or
higher is running|Free
Action:
Port 1521 is not used, or is used by TNS*Listener version 9.0.1 or
higher.
Rule [ 64 ]: Environment Variables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the following environment variables are not set: TNS_ADMIN,
ORA_NLS, and LD_BIND_NOW. In addition, the following environment
variables must not references to any existing Oracle Home: PATH,
CLASSPATH and LD_LIBRARY_PATH.
Test [ FAILED ] :
Has reference to existing Oracle Homes = Properly defined
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value Action
Has reference to existing Remove any reference to existing
Oracle Homes Oracle Homes from PATH, CLASSPATH
and LD_LIBRARY_PATH.
Some variables are set Unset TNS_ADMIN, ORA_NLS, and
LD_BIND_NOW.
Cannot access /etc/oratab Grant read permission on
/etc/issue to the current user.
</PRE>
Rule [ 67 ]: DNS Lookup
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the host is properly registered in the DNS.
Test [ FAILED ] :
nslookup IP_address = Host correctly registered in DNS
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value Action
nslookup host.domain The DNS server failed to resolve the
nslookup using host.domain.
nslookup IP_address The DNS server failed to resolve the
nslookup using IP address.
Cannot determine IP address Fix any problem with host IP address.
Cannot access Grant execute permission on
/usr/bin/nslookup /usr/bin/nslookup to the current
user.
</PRE>
Rule [ 68 ]: /etc/hosts format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if /etc/hosts file contains a line with "ip_address
fully_qualified_hostname short_hostname".
Test [ PASSED ] :
Contains host.domain = Contains host.domain
Action:
The Fuly Qualified Domain name has been set correctly.
Rule [ 69 ]: Oracle Home length
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check that the path to the Oracle home directory is not longer than
127 characters.
Test [ PASSED ] :
Less than 127 char = Less than 127 char
Action:
Oracle Home directory is not longer than 127 characters.
Rule [ 70 ]: Memory for Dev Kit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Developer Kits
install type. The minimum requirements is 256 MB.
Test [ PASSED ] :
Available = Available
Action:
The machine has enough memory to install J2EE & Webcache install type.
Rule [ 71 ]: Memory for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Business
Intelligence & Forms install type. The minimum requirements is 1 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough memory to install Business Intelligence & Forms
install type.
Rule [ 72 ]: Space for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough disk space to install Business
Intelligence & Forms install type. The minimum requirements is 2 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough disk space to install Business Intelligence &
Forms install type.
Rule [ 73 ]: control-center
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required control-center package version is
installed. For RedHat AS/ES 4.0: control-center-2.8.0-12.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.
Rule [ 74 ]: xscreensaver
~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required xscreensaver package version is
installed. For RedHat AS/ES 4.0: xscreensaver-4.18-5.rhel4.2.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed. -
We have Oracle® Application Server 10g Release 2 (10.1.2), HTMLDB 1.6.0.00.87
and the Based on authentication scheme from gallery:Oracle Application Server Single Sign-On (HTML DB as Partner Application).
The best way I believe I can explain this issue is by explaining the user actions:
1.User Authenticates through SSO login page.
2.From Portal Launches HTMLDB Application.
3.Authentication is successful.
4.All links, buttons and actions work properly on htmldb application.
5.User clicks link to open page in portal or in discoverer.
6.When the user comes back to the HTMLDB Application and clicks on any link or button the following error is displayed.
500 Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
We have gone through the configuration steps for SSO with HTMLDB and everything looks fine.
Any clues??I'm sorry Scott, I'll try to clarify.
When you do step 1, how do you first get to the login page, by visiting your application page first?
By Going to the Portal.
Step 2 is not clear to me,
What I mean is that we have a link on Portal to the HTMLDB Application.
I've never done that. Step 3 is not clear to me, if step 1 has already happened then authentication was successful at that point.
I said authentication is successful in step 3, because my understanding is that while the user is authenticated when he/she goes to the portal, once they go to the HTMLDB Application HTMLDB_SSO is used by HTMLDB to verify the credentials of the user. (This portion works fine, and this is what I mean on step 3).
Step 6, "when the user comes back" is something I don't understand the mechanism of. How does this work?
This was pretty bad on my part: What I mean is, the user through a link on the HTMLDB Application opens a page in portal, then leaves portal (either by closing the browser or by selecting the original link the user used to go to the HTMLDB App) and returns to the HTMLDB Application.
If you run your application by first visiting one of its pages before login, then you authenticate to SSO, and then just navigate around in your application (without any Portal/Discoverer links), does it work properly?
Yes, the HTMLDB Application works perfectly, until I go to Portal or Discoverer. If I use Database or HTMDB Authentication everything works perfect.
The error only happens when using SSO.
Thanks if you and I can't figure this out, at least we have made my questions clearer. -
HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbovAJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window. -
I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.
You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there -
Semantics and its' role in Business Services
Role and importance of semantics in the context of services and SOA:
Semantics refer to interpretation of information and not the literal definition of information/ data. Applying semantics to information turns it into knowledge. Semantics is the act of applying references and drawing conclusions given a set of more scientific informational constructs. Typically semantics are derived using the context in which information is presented. Transposition on the other hand allows applies the rule of inference where in one can draw conclusions on the implication of truth based on some set of facts.
Read more about this at <a href="http://entarch.blogspot.com/2007/10/semantics-and-its-role-in-business.html">Surekha Durvasula's</a> blog.
Surekha is an Enterprise Architecture of a large retail companyHi shalini,
Thanks for the reply and can you please say me the menu path for T.code BUSD
And can u please say the difference between 4.0 and 5.0 versions
Regards
Narayana
Message was edited by:
manam narayana
Message was edited by:
manam narayana -
What is RID in non clustered index and its use
Hi All,
I need help regarding following articles on sql server
1) what is RID in non clustered index and its use.
2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
Regards
RahulNext time Please ask single question in a thread you will get better response.
1. RID is location of heap. When you create Non clustered index on heap and
lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
this Thread for more details
2. I have not heard of Physical address space. I Know Virtual address space( VAS)
VAS is simple terms is amount of memory( virtual ) 'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
to do it ,if not it will soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
Please read
This Article for detailed information
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
I have a $20 credit showing on my itunes account. When I go to purchase it asks for my credit card info. I want to use the credit i have. how do I access it/
-
Can we have a b2b webshop without Product catalog in it
Hi Gurus, I have a scenario where I dont want to Product catalog on the webshop. Customers log in and just want to see the order history. How can I set this up. Please explain if this is possoble. Thank You
-
Problems while deploying a war file as a part of ear file
Hello!!! Is there a weblogic or Sun reference document to find out the correct way to specify library paths or class paths when one is trying to deploy a WAR file as a part of an EAR file? I have been having lot of trouble and ver
-
Finder file sort order is reversed (z a), can it be changed
"all my files" shows reversed alphabetical sorting. can you change it to a->z? there is no little widget available like in other search ares of finder such as pictures,music, applications
-
USB audio DAC stops working after suspend
I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend. After