Setup and Configure IM Components SSO and DAS on Replica RMS Node

Question

Dear All,
I was trying the step
Step 5: How to Setup and Configure IM Components SSO and DAS on Replica RMS Node In Multimaster Replication (MMR) with Identity Management (IM) Cluster in High Availability Env
But, at the stage to connect to OID, it is not connecting to the RMS database.
When I checked login through ODM, it is connecting fine. also, ldapbind is also binding fine.
How to solve this ? What will be the issue and where to check it ?
Also, from the RMS, when I am connecting through EM console, I am not getting any output on Infrastructure link to change the passwords. its showing
Identity Management
Error retrieving information of default metadata repository.
Unable to establish secure connection to Oracle Internet Directory Server ldap://devportal.paaf.gov.kw:636/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
If there is any experts, pls reply. Because, last time I created a TAR and it took months to resolve and ultimately nothing happened they closed the TAR after some time as I was busy with some other works and not able to proceed with the synchronization.
Thanks in advance,
With Regards,
Sheeja Anil

Answer 1

Rule [ 47 ]: fuser link
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the fuser symbolic link /sbin/fuser -> /bin/fuser exists or
not. This is required for Suse 8.0 and Suse 9.0.
Test [ PASSED ] :
Not required =~ Exists|Not required
Action:
fuser link exists or not required.
Rule [ 48 ]: orarun package
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the orarun package is installed and if the oracle user
environment need to be reset. This is only required for Suse 8.0 and
Suse 9.0.
Test [ PASSED ] :
Not applicable =~ Not installed|Installed correctly|Not
applicable|Environment reset not required
Action:
orarun is not installed or installed correctly.
Rule [ 49 ]: semmsl
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmsl kernel parameter is 256 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmsl kernel parameter is 256 or higher.
Rule [ 50 ]: semmns
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmns kernel parameter is 32000 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmns kernel parameter is 32000 or higher.
Rule [ 51 ]: semopm
~~~~~~~~~~~~~~~~~~~
Description:
Check if semopm kernel parameter is 100 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semopm kernel parameter is 100 or higher.
Rule [ 52 ]: semmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmni kernel parameter is 142 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmni kernel parameter is 142 or higher.
Rule [ 53 ]: shmall
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmall kernel parameter is 2097152 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmall kernel parameter is 2097152 or higher.
Rule [ 54 ]: shmmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmax kernel parameter is 2147483648 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmax kernel parameter is 2147483648 or higher.
Rule [ 55 ]: shmmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmni kernel parameter is 4096 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmni kernel parameter is 4096 or higher.
Rule [ 56 ]: msgmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmax kernel parameter is 8192 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmax kernel parameter is 8192 or higher.
Rule [ 57 ]: msgmnb
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmnb kernel parameter is 65535 or higher. Refer to Oracle
Application Server 10g Installation Guide 10g - Chapter 4 - Section
4.3.3 Configuring the Kernel Parameters on Linux for more details on
how to configure this.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmnb kernel parameter is 65535 or higher.
Rule [ 58 ]: msgmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmni kernel parameter is 2878 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmni kernel parameter is 2878 or higher.
Rule [ 59 ]: file-max
~~~~~~~~~~~~~~~~~~~~~
Description:
Check if file-max kernel parameter is 131072 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
file-max kernel parameter is 131072 or higher.
Rule [ 60 ]: ip_local_port_range
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if ip_local_port_range kernel parameter is between 10000 and
65000 or higher. For more details on how to configure this parameter,
refer to Oracle Application Server 10.1.2 Installation Guide - Chapter
4 - Section 4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
ip_local_port_range kernel parameter is between 10000 and 65000 or
higher.
Rule [ 61 ]: limit processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of max processes is set to 16384 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of max processes is set to 16384 or higher.
Rule [ 62 ]: limit descriptors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of file descriptors is set to 65536 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of descriptors is set to 65536 or higher.
Rule [ 63 ]: Port 1521
~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if port 1521 is free or not. If port 1521 is used by an Oracle
listener version 10.1.0.2 or later, then the existing listener will be
used by the existing database and the Oracle Application Server 10g
Metadata Repository. The installer will perform this configuration
automatically. If port 1521 is used by an Oracle listener version
earlier than 10.1.0.2, then the existing listener need to be stopped.
After the installation is complete, the new 10.1.0.2 listener can be
configured to listen to the existing (pre 10.1.0.2) databases. If port
1521 is used by non-oracle programs, then this program need to be
configured to listen to ports other than 1521. Refer to Installation
Guide, section 4.4.4 for more details.
Test [ PASSED ] :
TNS Listener 10.1.0.2 or higher is running =~ TNS Listener 10.1.0.2 or
higher is running|Free
Action:
Port 1521 is not used, or is used by TNS*Listener version 9.0.1 or
higher.
Rule [ 64 ]: Environment Variables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the following environment variables are not set: TNS_ADMIN,
ORA_NLS, and LD_BIND_NOW. In addition, the following environment
variables must not references to any existing Oracle Home: PATH,
CLASSPATH and LD_LIBRARY_PATH.
Test [ FAILED ] :
Has reference to existing Oracle Homes = Properly defined
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value          Action
Has reference to existing     Remove any reference to existing
Oracle Homes          Oracle Homes from PATH, CLASSPATH
                    and LD_LIBRARY_PATH.
Some variables are set     Unset TNS_ADMIN, ORA_NLS, and
                    LD_BIND_NOW.
Cannot access /etc/oratab     Grant read permission on
                    /etc/issue to the current user.
</PRE>
Rule [ 67 ]: DNS Lookup
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the host is properly registered in the DNS.
Test [ FAILED ] :
nslookup IP_address = Host correctly registered in DNS
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value          Action
nslookup host.domain     The DNS server failed to resolve the
                    nslookup using host.domain.
nslookup IP_address     The DNS server failed to resolve the
                    nslookup using IP address.
Cannot determine IP address Fix any problem with host IP address.
Cannot access          Grant execute permission on
/usr/bin/nslookup      /usr/bin/nslookup to the current
                    user.
</PRE>
Rule [ 68 ]: /etc/hosts format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if /etc/hosts file contains a line with "ip_address
fully_qualified_hostname short_hostname".
Test [ PASSED ] :
Contains host.domain = Contains host.domain
Action:
The Fuly Qualified Domain name has been set correctly.
Rule [ 69 ]: Oracle Home length
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check that the path to the Oracle home directory is not longer than
127 characters.
Test [ PASSED ] :
Less than 127 char = Less than 127 char
Action:
Oracle Home directory is not longer than 127 characters.
Rule [ 70 ]: Memory for Dev Kit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Developer Kits
install type. The minimum requirements is 256 MB.
Test [ PASSED ] :
Available = Available
Action:
The machine has enough memory to install J2EE & Webcache install type.
Rule [ 71 ]: Memory for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Business
Intelligence & Forms install type. The minimum requirements is 1 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough memory to install Business Intelligence & Forms
install type.
Rule [ 72 ]: Space for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough disk space to install Business
Intelligence & Forms install type. The minimum requirements is 2 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough disk space to install Business Intelligence &
Forms install type.
Rule [ 73 ]: control-center
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required control-center package version is
installed. For RedHat AS/ES 4.0: control-center-2.8.0-12.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.
Rule [ 74 ]: xscreensaver
~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required xscreensaver package version is
installed. For RedHat AS/ES 4.0: xscreensaver-4.18-5.rhel4.2.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.