SSRS 2005 - table heading adds a keyword " ID " on one of the column need to remove

HI All
I have an column name which is dynamically generated like [02 Mar 08 Mar 2015] , when I add it on report table, it adds suffix : ID to it showing it like [ ID 02 Mar 08 Mar 2015 ]
If i want to remove the ID using replace expression it doesnt work for me.
This is how my column look when i run the sp
The daterange column changes as shown below with Id suffix and minus "-" is vanished too.
Kindly help me out on this.
Thanks a lot in advance.

Hi xXShanXx,
According to your description, the column name with square brackets and a dash can display correctly when executing the query, but the column name will change in Reporting Services.
In Reporting Services, the column name must begin with a letter followed by letters, numbers, or the underscore character(_). In your scenario, since the column name start with a square bracket and followed by a dash, it’s an invalid name and it can’t be
recognized by Reporting Services. By default, the Reporting Services remove all invalid parts, and the column is prefixed with a keyword to indicate it’s a valid name. This is a by design behavior.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

How to store data file name in one of the columns of staging table

My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
Abhay

Pl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini

Is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.

is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.

Okay then. If your seven numbers are in column B then the formula next to each number in column C would be
=IF(B=0,0,1700/COUNTIF(B,">0"))
This assumes all non-zero numbers are positive numbers. The sum will be 1700.

TS3276 On the left side of the mail page there is an "On My Mac" header with several folders included. One of the folders, in white, is one called "recovered mail" I don't know how this got there and am not able to delete it. Not receiving any email now.

On the left side of the mail page there is an "On My Mac" header with several folders included. One of the folders, in white, is one called "recovered mail" with 843 messages in it. I don't know how this got there and am not able to delete it. I am also no longer receiving any email now. Help!

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

How to add dynamic data type as one of the terminals of a Custom VI

Hello,
Can anybody tell me if it's possible and how to add a dynamic data type as one of the terminals of a sub-VI? I would like to have a terminal that I can connect signal from DAQmx to my sub-VI. Thanks.

Here is one of the coolest things about LV, and one of its major advantages over languages like VB - it has automatic memory management and it compiles whenever you make a change. This allows you to be very free in the way you handle data and change your code. In this case, you should note the small gray dot that appears when you wire the dynamic data into the Array of Waveforms input. This gray dot means that LV coerces the source data type (DDT, in this case) to the target data type (Array of waveforms). If it wouldn't match, you would get a broken wire, the VI couldn't run, and if you hover over the wire or press the broken run button you would get an exact description of the error. Cool, eh?
This can also be seen in other things. For example, you can change an array's data type or number of dimensions by simply doing it. This will automatically be reflected anywhere the array is called in the program, and if anything won't match, the VI will be broken. If you change the # of dimensions of an array, any array function which that array is wired to will adapt. This allows you to be very safe in the way you write code, because you have LV watching all that annoying stuff for you. You don't have to worry about misspelling a variable here (for the most part).
One important point about coercion - it does take processor power. This will usually only be evident in large arrays or loops, but it is an important point. Another thing is that coercing numeric types can cause you to lose data - coercing a DBL to a U16, for example, will cause you to lose all the fractional data.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

How do I add a keyword tag in iPhoto on the iPad?

I looked through the Help for iPhoto and couldn't find a section on how to add keyword tags to my images.
Things like the names of the people in the photos, etc.
The screen shots of iPhoto show a Face Taggging feature.
How do I get to that?
Thanks for any help or advice!

I talked with Apple Support.
The iPhoto app on the iPad is not the same as iPhoto on the Mac.
It doesn't support adding keyword tags.
Possibly a feature to be added in the future.
I have iCloud enabled for PhotoStream.
So my iPad picture was sent automatically to my download folder on my pc.
I can take it from there into PhotoShop Elements and add the tags.

Deleting a row from a table containing CLOB as one of the columns

When i delete a row from a table which contains a CLOB (internal clob) i.e. CLOB or BLOB column, Will the CLOB data will also be deleted ? I understand that what exactly stored in the CLOB column is the clob locator which points to the actual data.
So, when I delete this row, the clob locator will be deleted, but will the actual data what this locator is pointing to is also deleted ??? if not what is the process to delete the data the locator is pointing to when the row containing the locator is deleted ? If this is not happening then the actual data might become an orphan data which nobody has access to, will automatic garbage cleaning occurs on a frequent intravels to delete unaddressed data residing on the database server ?
Thanks in advance for the help, can email me at [email protected] alternatively.
Regards,
Srinivasa C.

Michael,
Thanks very much for your inputs, here are the results i got when i tried the way you explained in your answer, the TRUNCATE command made the actual size back to normal, but the delete is not the same, so, how can i delete the data that a particular clob locator may point to ?
truncate would delete all the rows of the table, which might not serve my purpose, i would like to delete a row and also it's associated clob data from the database! is there anyway to do this ?
is there any limitation on the ool_sample size? i am basically a c++ programmer, i am looking for some function like FREE which would free the allocated memory to the clob once the locator is deleted.
your help is greatly appreciated - Thanks!
:-) Srini.
==========================
My Results:
==========================
SQL> create table sample (
2 id integer primary key,
3 the_data CLOB default empty_clob() )
4 lob (the_data) store as ool_sample;
Table created.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
20K
SAMPLE
10K
SQL> select count(*) from sample;
COUNT(*)
0
SQL> begin
2 for i in 1..1000
3 loop
4 insert into sample values (i, RPAD('some data', 4000) );
5 end loop;
6 end;
7 /
PL/SQL procedure successfully completed.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
6420K
SAMPLE
70K
SQL> delete sample;
1000 rows deleted.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
6420K
SAMPLE
70K
SQL> commit;
Commit complete.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
6420K
SAMPLE
70K
SQL> begin
2 for i in 1..1000
3 loop
4 insert into sample values (i, rpad('some data', 4000));
5 end loop;
6 end;
7 /
PL/SQL procedure successfully completed.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
9616K
SAMPLE
70K
SQL> truncate table sample;
Table truncated.
SQL> select segment_name, round(sum(bytes)/1024, 2) || 'K' as sotrage_consumed
2 from user_segments
3 where segment_name in ('SAMPLE', 'OOL_SAMPLE')
4 group by segment_name;
SEGMENT_NAME
SOTRAGE_CONSUMED
OOL_SAMPLE
20K
SAMPLE
10K

Creation of a Table Type value set with 'ALL' as one of the value

Gurus,
My requirement is to create [table type]value set which would show the [LOV]values in parameter of Conc Progr .
So far we have three such values to chose from ,they are, 'Frozen', 'Pending' and 'Testing'. I achieved it.
My question is ,
if user wants to choose 'ALL' three values , how shall I accommodate it in this table type value set?
Giving fourth option as ALL, which would eventually select 'ALL' three values 'Frozen', 'Pending' and 'Testing'.
thanks in advance.
-sDJ

You can't have UNION in the value set.
Try creating a view, which is having UNION with ALL.
Check the following links.
Table Value Set.
ORA-00907 Missing Right Parenthesis in Value Set
By
Vamsi

How to add Two Interface Mappings to One Receiver(BPM) Help needed urgently

I have a requirement where i get a flat file and split into multiple files and send to BPM.
For each split file I created Interface Mapping using Java Mapping Program.
In the Configuration how to add more Interface Mappings?
Thanks for your help in advance.
Regards
Sudha

You can use Enhanced Interface Determination to split one message to Multiple hence to multiple Interfaces.
You have to change the Occurance of Messages in Message Mapping and their Corresponding Interfaces in Interface Mapping. That would create Multiple Files with Multiple Interfaces to Receiver (BPM)
1) You need not to use Multilpe Interface Mapping
2) You will use Extended Interface Determination for this.
regards.
Jeet.

Need to put flag in one of the column of internal table

TYPES : BEGIN OF ty_bseg.
          INCLUDE STRUCTURE bseg.
TYPES : flag(1) TYPE c.
TYPES : END OF ty_bseg.
DATA : gt_bseg TYPE TABLE OF ty_bseg.
SELECT * FROM bseg
            INTO TABLE <b>gt_bseg</b>
            FOR ALL ENTRIES IN gt_bsak
            WHERE bukrs = gt_bsak-bukrs
            AND   belnr = gt_bsak-belnr
            AND   gjahr = gt_bsak-gjahr.
Now I have to fill 'X' in the internal table gt_bseg.
how can I fill all the records of itab gt_bseg with flag 'X'.
For better performance... is there any command like modify or...?

Hi Sam,
Use the following code.
*Code start
loop at gt_bseg.
gt_bseg-flag = 'X'.
modify table gt_bseg transporting flag.
endloop.
*Code ends
Cheers,
Vikram
Pls reward for helpful replies!!

OAF :I need to show totals for columns that breaks on one of the column in Advance Table

I am using advance table (AT),
I have a requirement to calculate totals for few columns in the AT, based on the account number ( totals should break on the account # , as shown below )
Please help.
Account
Desc
Paid Amt
AP Credit
acc1
desc1
200
100
acc1
desc1
300
100
acc1
desc1
400
100
Total 900
Total 300
acc2
desc2
150
50
acc2
desc2
250
50
acc2
desc2
100
150
Total 500
Total 200
Message was edited by: 85de445e-a75a-4f2f-b086-8cb6abb09c5d
CAN ANY ONE PLEASE PROVIDE ANY INPUTS.. , AS ITS URGENT ! Thanks in advance.

Any updates on this please !!! ?
Please suggest if this can be achieved by any other region type or any specific type to be used ??

HOW populate target table if one of the column in target has sequence on it

Hi,
I am trying to insert rows in oracle target, on oracle table column is LIST_ID(PK) has sequence on it.
I am not mapping the LIST_ID(target) from source but it seeing an error invalid identifier.
How to solve this

at 14 step giving that invalid identifier as LIST_ID which is PK column in target column
how to slove to this

I am getting this error message for one of the columns in my big table:

FOR XML could not serialize the data for node 'NAME' because it contains a character (0x001A) which is not allowed in XML. To retrieve this data using FOR XML, convert it to binary, varbinary or image data type and use the BINARY BASE64 directive.

The message is fairly clear: it is simply the case that some characters are not permitted in XML.
Character 0x001A is 26 decimal and this is a control character and if you have this in a column called NAME there is something spooky with your data, and there is reason to investigate this:
SELECT * FROM tbl WHERE charindex(NAME COLLATE Latin1_General_BIN2, char(26)) > 0
If you don't care, you can wrap the troublesome column replace:
replace(NAME NAME COLLATE Latin1_General_BIN2, char(26), '?')
The binary collation is required since char(26) is typically an undefined character in a Unicode non-binary collation and unexpected things happens.
Erland Sommarskog, SQL Server MVP, [email protected]

Table Header not getting repeated in subsequent pages

Hi,
I have a table and i want to table header to be repeated in subsequent pages but only till 2nd page the table header is repeated from the 3rd page onwards the table header is not repeated.
I have selected the Header Row in hierarchy and in Pagination tab for the header row i have checked the the check box Insert Header Row in Subsequent Pages.
After selecting the checkbox also table header is repeated only in 2 pages and not repeated after the second page.
My table hierarchy in form is :
TableSubform
---Table
HeaderRow
Row1
I am using Designer 8.0 and Acrobat Reader 8.1.2
Can you please help me in solving this issue.
Regards,
Bala Baskaran.s

Hi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S

SSRS 2005 - table heading adds a keyword " ID " on one of the column need to remove

Similar Messages

Maybe you are looking for