SSRS Report Display Question in Reportviewer

I created a report using a list to group data by system names in order to filter data. Based on filtered data, I populate the chart associated to the group. If I run this report in report builder, everything looks good as in following image.
However, if I put this report in reportviewer 10.0 and render in IE10 and above, all the chart are not displaying correct. Somehow a very big space is added after every chart. I don't have problems with displaying any charts not in list, or any list only
contains text data.
I have been researching this issue for two days, and could not find any solution. Please help. Thank you!

Hi Sichen,
Based on my test, I cannot reproduce the same issue in my test environment.
In SSRS, if we are use list to display tablix, the location of the tablix in the list would affect the structure of this tablix in the report. For example, if there are lager gap between tablix bottom line and list bottom line, when we preview the report,
we will get big space between each charts. Please make sure it is proper gap in your report design.
The render mistake in IE 10 may be due to the IE compatibility issue. Please try to configure the IE 10 to run in Compatibility View mode to check if the report render correctly.
Reference:
http://social.msdn.microsoft.com/Forums/en-US/01c7db3e-8610-4bdd-957c-8eceba44907e/ie-10-ssrs-reports-no-longer-allows-drop-down-functionality
If the issue is persist, could you please post your dataset with sample data and the screenshot about your report design? It is benefit for us to do further analysis.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

Project Server Performance report using SSRS - Report display issue

Hi All,
We have developed and deployed a SSRS report in Project Server BI Center using performance dashboard, but half of the report only visible i.e. it is showing horizontal scroll bar at the bottom as below. I tried to change the web part width and height but
there is no difference. I also tried to change the performance point dashboard height and width but faced same issue.
Thanks in advance, Arun

As Per me their is not way to deal this issue. When you use web part and deploy SSRS RDL in project server horizontal bar display in the bottom if display area is not enough to display the data.
whatever height or width you choose in web part property it will come.
We have to live with this problem .
kirtesh

Display value in hh:mm time format in SSRS Report

Hi Everybody,
I have an SSRS report where one of the column is sum of time values. When I do the summation, the values are coming in this format. In the last column the minute value is getting displayed more than 60. How can I format it to proper time format as hh:mm
so that it displays as "08:15" . The expression which I am using is " Sum(CDec(FormatNumber(Fields!Overtime_Hours.Value,2)),"Month"). Your help would be highly appreciated.
January
31/1/2014
21/04/2014
00:00
07:75
00:00
07:75
Thanks & Regards,
RPC
Regards RCP

Hi RPC24,
According to your description, you can calculate the correct value of time summation. Now you want to make the result into proper time format (hh:mm). Right?
In this scenario, we can convert the time into string type, split the string based on delimiter ":" and convert each part into integer. Then do the calculation for each part and set the hour increase 1 every 60 minutes (we can adjust in expression).
We have tested this case in our local environment. Here are screenshots for you reference:
1. The report design looks like below:
A: =Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")
B:=CStr(SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(0)))+SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(1)))\60)+":"+CStr(SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(1)))
Mod 60)
Ps: In this sample, we used Time data type. You may need to do some modification in your expression based on the data type of the time data field.
2. The result looks like below:
Reference:
Summing the Value of HH: MM: SS In SSRS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Need to print an SSRS report in a web application to a designated printer without displaying in report viewer

In an asp.net webforms app, I need to be able to print SSRS reports directly to designated printers without displaying them in the report viewer. This needs to occur when I click on a button on the page, and I can use either local or server
side reports. There are 4 different reports, and one needs to be directed to a different printer from the other 3. One of them also has very rigid formatting requirements, so the formatting cannot be altered by the print method. I have
researched this for hours, but all the solutions I have found for doing this are for windows apps, not web apps. Can anybody help?

Hello,
You can try to use the Report Service web service to render the report and send to a printer to print the report programming.
http://printssrsreport.blogspot.com/2011/09/print-ssrs-report-using.html
Summer

Pre-Purchase Question - Deploying Crystal Report to SSRS Report Server

Our company has recently installed a SQL 2005 server for our accounting system. I had intended going down the path of using SQL Reporting Services as our reporting tool and deploying them to the builtin Report Server. However, I've been using Crystal Reports for years and find it much more user friendly for a non-programmer to use. I can actually write a report in Crystal, SSRS took me 3 days to achieve very little, I believe it requires too much SQL reporting knowledge for a beginner.
After spending many hours trawling the net looking for a solution to this problem, I found that Crystal comes as part of Visual Studio. However, I also believe the version of Visual Studio that comes with SQL2005 is the basic version, and I'd need the Pro version to get the Crystal add on.
To this end, I've downloaded the trial version of Crystal 2008 and installed it. I find I can write a report in Crystal, and then I can manually add that report to a SSRS project. When I open the Crystal Report within Visual Studio I can see all the correct Crystal toolbars and menus etc, so it would appear that the installation of Crystal for Visual Studio has integrated properly. I can then deploy that report to the Report server and see the report on the web page. However clicking to open the report then opens the full Crystal Reports application, instead of just displaying the report in the web page.
I've been unsuccessful in finding a solution to the above deployment problem. I'm seeking a solution so that my users can just see the report without Crystal itself opening up. I've been advised that there is a Crystal Report Server that I can purchase, but I don't wish to go to that expense when we already have this functionality built into our SSRS server.
Can you please advise if it's possible to deploy the Crystal report to the SSRS Report Server and then open the report within the web page without opening the full Crystal app, and if so what steps I would need to take to implement this.
If this issue can be resolved, I'll be more than happy to purchase the full Crystal 2008 package and forget SSRS as a bad idea.
Sorry to be so long winded, I wanted to be clear what the issue is. Any information /advice would be very much appreciated.

Hello Diane,
I would not know if Crystal Report can be used with SSRS but I know for sure that you can use the embedded Crystal Reports Version with comes with VS 2005 or VS 2008 to create reports and to display them in web and windows application.
We have lots of samples how to do this in our [dev community|https://boc.sdn.sap.com/].
Also, you can use [Crystal Reports 2008|https://boc.sdn.sap.com/developer/library/CR2008SDK] with MS SQL 2005.
Other products like Crystal Reports server can also use MS SQL 2005.
Please see our [supported platforms for CR 2008|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000712280&_OBJECT=011000358700000675322008E] on windows.
Hope this helps
Falk

Print Button of SSRS report is not display report in IE11

Hello All,
We are running on SSRS 11.0.0.0, .net framework 4.5, SQL server 2012.
Everything is working fine in IE9, IE10, now our client has updated their browser to IE11. In IE11 the print button in SSRS report is not showing. We have tried browser file,
it will show print button in IE11 but it is not functional. we have also tried to change browser mode to IE 10 or IE 9 (using <meta http-equiv="X-UA-Compatible" content="IE=8" />) but it didn't work in IE 11.
Some forum suggested to change framework to 4.5.1 but i
cant change framework now. so please suggest some alternatives to achieves the functionality.

Hello Pinakin,
I recommend that you post your question in SSRS or IE related forums.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to display an "All Day Event" date correctly in an integrated SSRS Report?

I have two event items in a calendar list in SharePoint 2010. Both items have the same start time and end time. One of them, however, has the "All Day Event" checkbox checked. If I access them through a REST service, this is how the data is
returned:

<d:StartTime m:type="Edm.DateTime">2014-03-21T00:00:00</d:StartTime>
<d:EndTime m:type="Edm.DateTime">2014-03-25T23:55:00</d:EndTime>
<d:AllDayEvent m:type="Edm.Boolean">false</d:AllDayEvent>

<d:StartTime m:type="Edm.DateTime">2014-03-21T00:00:00</d:StartTime>
<d:EndTime m:type="Edm.DateTime">2014-03-25T23:59:00</d:EndTime>
<d:AllDayEvent m:type="Edm.Boolean">true</d:AllDayEvent>
I have a report in the same SharePoint 2010 site that uses SSRS in integrated mode. The data source is the calendar list mentioned above. The date fields are not formatted, just displayed as them come from the list/database.
My locale is set to en-US. When I run the report, the start date for item 1 is displayed as "3/21/2014" ('all day' set to false) but the start date for item 2 is displayed as "3/20/2014" which is incorrect ('all day' set to true).
I did some research online and found out that SharePoint stores all date fields as UTC except for 'All Day Events', which are stored in local time (our servers are in Central Time, but I'm running the report fom Pacific Time, in the US).
I coudn't find a solution to display the date correctly in the integrated SSRS report. Is there a way, maybe some straightforward formatting, to show All Day Event dates correctly? I tried adding hours but this is inconsistent with daylight saving hour changes.
I would appreciate any help.
C#, Sharepoint

Hi SharpBud,
The date for all day event stored in SQL in GMT time, the start time for an all day event returns the start time in GMT time, which is not the current time most likely.
This is a confirmed issue, as a workaround, I would suggest you to use a calculate column for the event for the column, using the following format:
IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",IF([Start Time]=ROUND([Start Time],0),[Start Time],DATE(YEAR([Start Time]),MONTH([Start
Time]),DAY([Start Time])+1)),[Start Time])
Thanks,
Qiao Wei
TechNet Community Support

Need to display the first 5 values of a Multi value parameter in SSRS report

Hi All,
I have SSRS report with multi value parameter. I need to display the parameter selection values in a text box. I've more than 50 records in the multi value parameter list. I've included the code to display "All" if I choose "select
all" option otherwise it will show the selected values. But, I need to change the logic. I have to show only the 1st 5 records if I choose more than 5 records.
How can I implement this?
I have used the below code
=iif(
Parameters!Country.Count = Count(Fields!Country.Value,
"Country")
,"All"
,iif(Parameters!Country.Count>5
,"Display the 1st 5 values"
,Join(Parameters!Country.Value,",")
Regards,
Julie

Hi Julie,
Per my understanding that you want to always show the first values from the param country to a textbox when you have select more then five values from the dropdown list, if you checked "select all", textbox will display "All", if
you select <=5 amount of values. it will display the selected values, right?
I have tested on my local environment and that you can create an hide parameter(Param2) to display just the first five values from the Country and when you select more then five values from country you will get the Join(Parameters!Param2.Value,",")
to display.
Details information below for your reference:
Create an new DataSet2 which the Param2 will get the values from：
SELECT TOP (5) Country
FROM tablename
Create an new param2 and hide this parameter, Set the "Available values" and "Default values" by select the "Get the values from a query"(DataSet2)
You can also Specify first five value for the "Available values" and "Default values", thus you will not need to follow the step1 to create the dataset2
Modify the expression you have provided as below:
=iif(Parameters!Country.Count = Count(Fields!Country.Value, "DataSet1"),"All" ,iif(Parameters!Country.Count>5 ,Join(Parameters!Param2.Value,","),Join(Parameters!Country.Value,",")))
Preview like below
If you still have any problem, please feel free to ask.
Thanks,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

SSRS Report Viewer display issues after KB2888505 and now KB2898785

After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change. Rolling back KB2888505 was a temp fix for my
users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar. The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time. Others have reported this same issue so
maybe we can get more visibility on TechNet.

Hi,
These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
Karen Hu
TechNet Community Support

Project Server 2013 - SSRS reports don't display icons

We have an SSRS report that works fine in Visual Studio. It works fine in the PWA reporting document library for test. However, when we put it into production, we are getting an issue where the SSRS icons/images and the report icons for the parameter drop
down do not display. The image inserted is of the top header of the report where everything is a dot and should be the "refresh" and left arrow/right arrow icons from the web page and the parameters and "collapse" icons that display
the red x.
Collin

Hi Collin,
This is more of a SharePoint / SSRS issue rather than Project Server. It could be a permission issue. Or even an access issue - may be you have an alternate access mapping etc.
It might be worth posting this query on one of the forums below:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
https://social.technet.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointgeneral
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

SSRS reports inside SPO 2013 - Question about ADFS

Our SPO 2013 Tenant is secured by ADFS Claims Based.
I understand SSRS integrated is not available for SPO 2013.
We want to allow links from SPO 2013 to SSRS Reports that authenticate with the same ADFS tokens - so no prompting.
Possible? If so, what do we need?
Possible to provision the SSRS server in ADFS? What versions of SSRS will allow this?

Well, should we move this to the Power Query forum and try it there?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

SSRS report using mdx query to display sales of product by yearwise

There is a requirement to create SSRS report as
Product +Calender2011 -Calender 2012 +Calender 2013
+ Calender 2014
Jan12 Feb12 Mar12...
Product 1 50 100 200 ..
Product 2 150 900 200 ..
Product 3 250 180 900 ..
Product 4 450 100 200 ..
Product 5 50 100 200 ..
Product 6 50 100 200 ..
When I click on Calender2011 corresponding all months of 2011 has to appear and likewise for Calender2012, CalenderN
The MDX query I have like as follows-
Select Non Empty{
[Measures].[Product1],
[Measures].[Product2],
[Measures].[Product3],
[Measures].[Product4],
[Measures].[Product5],
[Measures].[Product6],
[Measures].[Product7],
[Measures].[Product8],
[Measures].[Product9],
[Measures].[Product10],
[Measures].[Product11],
} ON Rows ,
Non Empty { ([Dim Calendar H].[Year Name].[Year Name] ) *([Dim Calendar H].[Month name].[Month name])
ON COLUMNS
FROM ( SELECT ( { [Dim Calendar H].[Year Name].&[Calendar 2014],
[Dim Calendar H].[Year Name].&[Calendar 2013],
[Dim Calendar H].[Year Name].&[Calendar 2012],
[Dim Calendar H].[Year Name].&[Calendar 2011] } )
ON COLUMNS
FROM [Cube])
Please help me.
Advance thanks...

Hi Afans,
According to your description, you want to create a drill-down report using SQL Server Analysis Services database, right?
In this case, you need add the Year and Month fields to the column group, and set the Month column can be toogled by Year column group. I have teste it on my local environment, here is the sample query for your reference.
select [Measures].[Internet Sales Amount] on 0,
[Product].[Category].members*[Date].[Calendar].[Calendar Year].members*[Date].[Month of Year].members on 1
from
[Adventure Works]
Reference
http://popbi.wordpress.com/2012/03/02/ssrs-how-to-add-a-column-group-to-an-existing-table/
http://msdn.microsoft.com/en-IN/library/dd207042.aspx
Regards,
Charlie Liao
TechNet Community Support

Open SSRS report link in browser

Hi,
I have developed 3 SSRS report. these report contains quality and production updates. These report will be using as visual display dashboard in production area and will be view/flash in LCD monitor.
My requirements is how can i open the SSRS link using an script and put a time to perform the next SSRS link. Or it possible to use IE9 as browser and open the SSRS link. any idea guys is very much appreciated. thank
you.
Jon

Hi Jon,
Just as BI_group and Vishal said, there are two methods to open another report from one report in Reporting Services. We can enable an action with “Go to report” or “Go to URL” option to achieve the requirement. For more details, please see:
Method1: Go to report
Right-click a report item to open the properties dialog in main report, click Action in the left pane.
Enable Go to report action, then select the main report name in the drop-down list.
If we want to pass some parameters from main report to subreport, we can Add a parameter as below:
Select ID (a parameter name from subreport) in the drop-down list of Name, and select [ID] (a field name from main report) in the drop-down list of Value.
Method2: Go to URL
Right-click a report item to open the properties dialog in main report, click Action in the left pane.
Enable Go to URL action, the URL below is for your reference:
="javascript:void(window.open('http://server_name/ReportServer/Pages/ReportViewer.aspx?%2ffolder_name%2fsubreport_name&rs:Command=Render&parameter_name="&Fields!field_name.Value &"'))"
For more information about Drillthrough, Drilldown, Subreports, and Nested Data Regions (Report Builder and SSRS), please refer to the following document:
http://msdn.microsoft.com/en-us/library/dd207141.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do I execute a ssrs report rdlc file from c# winforms.

Hello
I am new to c#
How do I execute a ssrs report rdlc file from c# winforms.
I have a rdl file which i have converted to rdlc and "added" to my win form
when I try to run the report I dont get the output
Please help me with a sample code
regards
Manoj Gokhale

Hi Manoj,
According to your description, you want to display RDLC file using WinForms ReportViewer control.
In your scenario, you can add a ReportViewer control to a Windows application, then select a report that is part of the existing project. For more information, please refer to this article:
Using the WinForms ReportViewer Control.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS Report Display Question in Reportviewer

Similar Messages

Maybe you are looking for