SSRS report running very slow but query is very fast in SSMS

I am running a very basic report. I am just retrieving some data from a table and I am using a parameter in the Where clause of the query. The query runs fast (in less than 5 secs) if I hardcode the parameter in the SSRS query but if it's left as a dynamically
chosen parameter the query takes over 5 minutes to render. I have read a little about "Parameter Sniffing" but I am not sure if that applies to my case since I am only using a TSQL query and not a SP.
Any feedback would be appreciated.
PS: My query looks like below:
Select Col1, Count(*)
From Tbl1
Where Col2 = @Para1
Group By Col1
KK

Hi Kk,
Is your data retrieval takes time or report rendering takes time? Run this query in your report server database to get the above two. Select * From Executionlog2
Check the timings data retrieval time, processing time, and report rendering time.
If data retrieval takes time,
Give some default values to filters (parameters).
If parameter rendering takes time
Choose different options for parameter selection. Instead of multiselction of parameter, use like etc.
Let me know which causing this problem after running the SQL profiler or executionlog query so that I can help you more. Or you can use SQL profiler to check what query takes more time.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

SSRS reports running slow while fetching data from SQL server DB

We are currently facing issues with lots of our SSRS reports running very slow. Approx they are taking around 15-20 minutes compared to earlier which was 2-3 minutes.
Also, the SSRS reports which fetch their data from a Database is acting as Subscriber for a reporting server. That is we have an OLTP DB server whose Database say 'A' is getting replicated onto the server where say Database 'B'. On this B we have our SSRS
reports fetching the required data and are reported to be running very slow.
As a start I have checked for Index and stats to be properly updated and yes they are.
I am not sure now, from where to start analysing the issue.
I believe replication, not to be the issue as earlier also we had replication set up and never saw the slowness.
IS memory or IO causing a problem, please help as i am not sure on how to find a fix for this?
Thanks in advance!

Hi,
You need to first find out what all are slow? Is it that the whole instance is slow? How about other queries /replication etc against those databases? Are they slow?
Check the reports which are slow, try to find the slowest reports and then start looking at execution plans. Check if there is any kind of blocking happening during the time the reports run. Also try running the reports manually and see if there is a difference
in execution time. Take a look at the waitstats during the time the reports are running.
Read this to get more better understanding -
https://technet.microsoft.com/en-us/library/ms177500%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

SSRS report taking more time but fast in SSMS

SSRS report taking more time but fast in SSMS,We are binding a string which more than 43000 length each and total number records is 4000.
Plese do the needful.It is not possible to create index because it crosses 900 byte.

Hi DBA5,
As per my understanding, when previewing the report, there are three options to affect the report performance. They are data retrieval time, processing time, rendering time.
The data retrieval takes time to retrieve the data from the server using a queries or stored procedures, the processing time takes time to process the data within the report using the operations in the layout of the report and the rendering time takes time
to display the information of the report and how it is displayed like excel, pdf, html formats. It is the reason why report take more time than in SSMS.
To improve the performance, we need to improve the three aspects. For the details, please see the great blog:http://blogs.msdn.com/b/mariae/archive/2009/04/16/quick-tips-for-monitoring-and-improving-performance-in-reporting-services.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Internet is very slow but says i have a good connection ?

My internet is very slow but yet i have a good connection please help

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
Are any other web browsers installed, and are they the same?
What about other Internet applications, such as iTunes and the App Store?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Firefox responds generally very slow but fast when moving the mouse

Firefox respons very slow but speeds up when I move the mouse over the page. Keeping the mouse moving results in normal speed.
?? Peter

Weird thing is that if I revert back to FF15, everything works with HA enabled and full bookmark menu.
but its a no go with FF16
PEACE

Report region runs very slow, but its sql runs fast

We have a page with a report region Type :SQL Query (plsq function body returning sql query) which runs very slow, pegging the tach on our db box for almost a minute before returning report rows. However, if we run the generated sql from sql plus, it returns all the rows in under 10 seconds with nary a blip on the box. Any idas how what could be causing this or how to debug?
Thanks,
Steve

OK, here is the bad boy, shortly after our code that returns the data.
declare
rc__ number;
simple_list__ owa_util.vc_arr;
complex_list__ owa_util.vc_arr;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 63;
null;
null;
simple_list__(1) := 'sys.%';
simple_list__(2) := 'dbms\_%';
simple_list__(3) := 'utl\_%';
simple_list__(4) := 'owa\_%';
simple_list__(5) := 'owa.%';
simple_list__(6) := 'htp.%';
simple_list__(7) := 'htf.%';
simple_list__(8) := 'wpg_docload.%';
if ((owa_match.match_pattern(p_string =>
'f'
/* */,p_simple_pattern =>
simple_list__
,p_complex_pattern =>
complex_list__
,p_use_special_chars =>
false)))
then
rc__ := 2;
else
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
end if;
:rc__ := rc__;
end;
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 1 25.53 26.59 4492 20992 60 1
Fetch 0 0.00 0.00 0 0 0 0
total 1 25.53 26.59 4492 20992 60 1

Very Slow SQL query - Fast in SSMS

We have a very simple query that executes instantly in SSMS, returning about 45,000 rows. Whenever I run the same query on a CFM page it takes about 47 seconds to execute.
I've tried reindexing, turning it into a stored procedure, etc.. but nothing seems to help. My other queries are also running a little slower, but not nearly as noticeable because they are smaller queries.
I have an additional CF10 server that seems to run the query perfectly fine on a test page.
The query is pretty much this:
Select X,Y,Z
FROM TABLE
WHERE BLAH BLAH BLAH
Can someone offer me some advice on what can cause this or how to find the issue?
Thanks!

Just an update. It ended up being "something" to do with the CF machine, although still not sure what exactly.
Ended up solving the issue by installing CF on identical hardware and patching to the same windows and CF versions. The site is now running like a champ and loading pages in less than 1 second.
Steve, I have a dynamic filter that I run a query of query on the 45k rows to generate. Once the first option is selected, it takes the distinct rows from the original query were x = selection and there can be 10-12 sub options to narrow down inside of that data. It seems to load much faster this way than by returning to SQL server each time a response is selected.
Thanks for your suggestions. Hopefully we don't have the issue again... whatever it was.

SSRS report with tabular model – MDX query CoalesceEmpty function does not return the provided string value

Hello everyone,
I created following calculated member in MDX query. I am using it in one of the report parameter in dataset (single select dropdown list as report parameter).
WITH MEMBER [Measures].[ParameterCaption] AS
CoalesceEmpty([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION,'None')
I would like to display 'None' text at the top of the dropdown list values. So that when user selects 'None' then this parameter will not considered in MDX query else the selected National Account Code will be considered to filter report data. But,
the above return blank/empty value for [Customer].[National Account Code].& member though I specified 'None' as text in CoalesceEmpty function. Any advice would be appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi Ankit,
It seems that you issue had been solved in your another thread.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5a5becac-226f-428a-95b0-aaaa22733818/ssrs-report-with-tabular-model-create-a-dropdown-report-parameter-with-none-option-as-the-top?forum=sqlanalysisservices#0e51bf8c-a66c-4df5-a244-0147728fdfdb
iif([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION="","None",[Customer].[National
Account Code].CURRENTMEMBER.MEMBER_CAPTION)
I marked this reply as answer, it will benefit to other members who have the similar issue.
Regards,
Charlie Liao
TechNet Community Support

SSRS report with tabular model – MDX query how to get the sum and count of measure and dimension respectively.

Hello everyone,
I am using the following MDX query on one of my SSRS report.
SELECT NON EMPTY { [Measures].[Days Outstanding], [Measures].[Amt] } ON COLUMNS,
NON EMPTY { ([Customer].[Customer].[Customer Key].ALLMEMBERS) }
HAVING [Measures].[ Days Outstanding] > 60
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM ( SELECT ( STRTOSET(@Location, CONSTRAINED)) ON COLUMNS
FROM ( SELECT ( {[Date].[Fiscal Period].&[2014-06]}) ON COLUMNS
FROM [Model]))
Over here, the data is being filtered always for current month and for a location that is being selected by user from a report selection parameter.
I would like to get the count of total no. of customers and sum of the amount measure.
When I am using them in calculated members it gives incorrect values. It considers all records (ignores the sub-select statements) instead of only the records of current month and selected location.
I also tried with EXISTING keyword in calculated members but there is not difference in output. Finally, I manage the same at SSRS level.
Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
Any help would be much appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
Hi Ankit,
We can use SUM function and COUNT function to sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension. Here is a sample query for you reference.
WITH MEMBER [measures].[SumValue] AS
SUM([Customer].[Customer].ALLMEMBERS,[Measures].[Internet Sales Amount])
MEMBER [measures].[CountValue] AS
COUNT([Customer].[Customer].ALLMEMBERS)
MEMBER [Measures].[DimensionName] AS [Customer].NAME
SELECT {[Measures].[DimensionName],[measures].[SumValue],[measures].[CountValue]} ON 0
FROM [Adventure Works]
Besides, you ask that does it make any difference if I manage it as SSRS level and not at MDX query level. I don't thinks it will make much difference. The total time to generate a reporting server report (RDL) can be divided into 3 elements:Time to retrieve
the data (TimeDataRetrieval);Time to process the report (TimeProcessing);Time to render the report (TimeRendering). If you manage it on MDX query level, then the TimeDataRetrieval might a little longer. If you manage it on report level, then the TimeProcessing
or TimeRendering time might a little longer. You can test it on you report with following query:
SELECT Itempath, TimeStart,TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering, ByteCount, [RowCount],Source
FROM ExecutionLog3
WHERE itempath like '%reportname'
Regards,
Charlie Liao
TechNet Community Support

SSRS Report running out of MS CRM

I have a large multi-page SSRS report that takes about 30 minutes to run. The report is run from CRM.
The problem is that because of the time it takes to run the report users have a tendency to go away and do other things, and when they come back to it later and go to the second page it has expired. It's fine if they go through the pages straight after the
report is complete.
Are there any settings that could control and increase how long the pages are available before they expire? Is this something to do with the IIS app pool timeouts?
SQL SSRS 2008, CRM 4.0, Server 2008. Separate Reporting and CRM SQL server.

To me it sounds like a session time-out issue. Due to how long your report is taking to run your report isn't being kept alive long enough in cache (the temporary DB). Here is a great article that explains it...
http://blogs.msdn.com/b/jgalla/archive/2006/10/11/session-timeout-during-execution.aspx
If you have to adjust the session timeout and can't get the report to run any faster by tuning your query, with 2008 you might be able to adjust the session timeout more easily by connecting to the Reporting Services instance in SSMS, Right-clicking the
website URL and selecting ‘Properties’, then in the “Server Properties” window select ‘Advanced’ from the list on the left and adjust the setting there.

Zimbra login is very slow - SQL query takes 35+ seconds

Hi,
my Zimbra login process remains very slow, 35-40 seconds with only a single user using it. I have Beehive set up as directory synchronized, with about 6500 users in it. However, I and a couple of colleagues the only ones making any use of it for testing. With just one person logging in, the following SQL query takes about 35 seconds to execute:
SELECT /*+ LEADING(rf rf_pp) USE_NL(rf_pp) INDEX_ASC(@rf_connect_by rf@rf_connect_by (ws_real_folders.parent_eid ws_real_folders.eid)) */ RF.ENTERPRISE_ID AS
ENTERPRISE_ID, RF.SITE_ID AS SITE_ID, RF.ENTITY_TYPE AS ENTITY_TYPE, RF.EID AS EID, RF.LOCK_ID AS LOCK_ID, RF.CACHE_ID AS CACHE_ID, RF.CACHE_TS AS
CACHE_TS, RF.CACHE_SQ AS CACHE_SQ, FLOOR(RF.SECURE_CHECK/10) AS ACCESS_TYPES, RF.PARENT_ENTITY_TYPE AS PARENT_ENTITY_TYPE, RF.PARENT_EID AS
PARENT_EID, RF.NAME AS NAME, RF.OWNER_ENTITY_TYPE AS OWNER_ENTITY_TYPE, RF.OWNER_EID AS OWNER_EID, RF.CREATED_ON AS CREATED_ON,
RF.CREATOR_ENTITY_TYPE AS CREATOR_ENTITY_TYPE, RF.CREATOR_EID AS CREATOR_EID, RF.MODIFIEDON AS MODIFIED_ON, RF.MODIFIED_BY_ENTITY_TYPE AS
MODIFIED_BY_ENTITY_TYPE, RF.MODIFIED_BY_EID AS MODIFIED_BY_EID, RF.VISIBILITY AS VISIBILITY, CASE WHEN (BITAND(:B13 , :B12 ) = :B12 ) THEN CAST(MULTISET(
SELECT METADATA_CEN
FROM OCS_ENTITY_METADATA_CENS_2_V META
WHERE META.ENTITY_EID = RF.EID ) AS OCS_COLLAB_ID_TBL_T) ELSE CAST(NULL AS OCS_COLLAB_ID_TBL_T) END AS METADATA_CENS, CASE WHEN
RF_PP.LAST_ACCESSED IS NULL THEN 'N' WHEN RF.MODIFIEDON > RF_PP.LAST_ACCESSED THEN 'U' ELSE NVL(RF_PP.RELATIVE_STATUS, 'N') END AS CHANGE_STATUS,
RF.PROPERTIES AS PROPERTIES_CLOB, RF_PP.PROPERTIES AS VIEWERPROPERTIES_CLOB, RF.DESCRIPTION AS DESCRIPTION
FROM (
SELECT /*+ QB_NAME(rf_connect_by) no_connect_by_cost_based */ RF.ENTERPRISE_ID ENTERPRISE_ID, :B4 SITE_ID, :B3 ENTITY_TYPE, RF.EID EID, RF.LOCK_ID LOCK_ID,
RF.ORA_ROWSCN CACHE_ID, RF.CACHE_TS CACHE_TS, RF.CACHE_SQ CACHE_SQ, RF.PARENT_TYPE PARENT_ENTITY_TYPE, RF.PARENT_EID PARENT_EID, RF.NAME
NAME, RF.OWNER_TYPE OWNER_ENTITY_TYPE, RF.OWNER_EID OWNER_EID, RF.CREATED_ON CREATED_ON, RF.CREATOR_TYPE CREATOR_ENTITY_TYPE,
RF.CREATOR_EID CREATOR_EID, RF.MODIFIED_ON MODIFIEDON, RF.MODIFIED_BY_TYPE MODIFIED_BY_ENTITY_TYPE, RF.MODIFIED_BY_EID MODIFIED_BY_EID,
RF.VISIBILITY VISIBILITY, RF.PROPERTIES PROPERTIES, RF.DESCRIPTION DESCRIPTION, RF.IS_HIDDEN IS_HIDDEN, LEVEL LEVEL_NUM, COALESCE (
(SELECT :B10 * 10 + 1
FROM AC_ENTITIES AEI
WHERE RF.EID = AEI.EID AND ( 1 = DECODE(AEI.SENSITIVITY_EID, :B9 , 1, 0) AND 1 = DECODE(AEI.OWNER_EID, :B8 , 1, 0) AND 1 = DECODE(AEI.AT_READ, :B7 , 1, 0) AND 1 =
DECODE(AEI.AT_DISCOVER, :B6 , 1, 0) AND 1 = DECODE(AEI.LOCAL_ACL_ID, :B5 , 1, 0) ) ) ,
(SELECT ACV.ACCESS_TYPES * 10 + ACV.IS_ALLOWED
FROM AC_CHECK_ONE_OF_V ACV
WHERE ACV.EID = RF.EID ) ) SECURE_CHECK
FROM WS_REAL_FOLDERS RF
WHERE RF.IS_HIDDEN = :B2 START WITH RF.PARENT_EID = :B1 CONNECT BY PRIOR RF.EID = RF.PARENT_EID ) RF, WS_RF_PRVT_PROPERTIES RF_PP
WHERE RF.EID = RF_PP.EID (+) AND :B11 = RF_PP.VIEWER_EID (+) AND 1 = BITAND(RF.SECURE_CHECK, 1) ORDER BY RF.LEVEL_NUMIt has ID atrvjdrmz2v6d in Enterprise Manager, and I've tried tuning it with the SQL tuning advisor in EM. I did the statistics gathering mentioned in another thread yesterday, to see if that helped - doesn't seem liked it. I'm running Database 11.1.0.6 and Beehive 1.5.1 in the build from the day it released.
Any hints? I'll post this to MetaLink as well, unless someone has some immediate idea what's wrong :-)

No speedup, the 35-40 seconds is for normal logins - and it's very consistent, at least if the database is otherwise idle. Immediately logging out and back in gives me the same wait, and the same query shows up in the Enterprise Manager interface.
It seems it might be related to Workspaces - from EM:
"PL/SQL Source (Line Number) BEE_CODE.WS_REAL_FOLDER_PKG (2998)"

HP Pavilion hard drive response time is very slow but tests pass (evenutally)

I have owned a HP Pavilion M1199a originally running Windows XP, but has been running Windows Vista 32-bit for the last 3 years or more.
The PC started to lock up for 30 seconds or more (2 weeks ago), with the disk light constantly on then go again for no apparent reason. These lock ups have become more frequent and for longer durations. I removed anti-virus software, and a few other applications/services but generally this computer is fairly clean as I use it as a media center PC.
I have tried checking the disk (SATA) for errors, and it passes although the tests take a lot longer than they should. The resource monitor shows no excess CPU usage and there is plenty of memory available. The disk monitor shows response times of 5000-20000 ms.
What is the best way to proceed from here? Is there a SATA controller or motherboard (ASUS PTGD1-LA) test? Should I buy another SATA drive and try that? I suspect that it is either the drive, drive controller and/or the motherboard that is failing but I don't know how to isolate the problem. The computer hardware configuration has remained the same for years.
The OS has the automatic updates enabled and I uninstalled the recent ones in case they were somehow causing an issue.

tr3v wrote:
Thanks for replying.
1/ No, but I am running Vista, so assume this will be the same? Or should I just look at the tmp and temp environment variables to see what folders are being used?
In Vista type temp in the Search programs and files box and double click on the temp files icon that appears above. Delete all the files in the folder that you can. It is safe as they are exactly what they are called and that is temporary files. If you haven't done this ever or in quite a while there should be a noticeable increase in the operating system's response time.
2/ Yes. It completes after a very long time.
5/ No - but will try this out too.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

SSRS report with tabular model - MDX query to filter parameter data based on Tuple value.

Hello Everyone,
I am working on SSRS report in which a tabular model is being used as a backend.
I want to filter the report parameters which are dependent to other parameters. Like, country, state, and cities drop downs.
All are multi-select parameters. I am using MDX queries to filter the parameters data.
Based on selected one or more countries, the data of states needs to be filtered.
The point is the text which is being displayed in state dropdown for each state name is combination of 3 different members.
So, I created the following Tuple for the same and can see the expected display names in states dropdown.
"("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME +")"
Now, when I would like filter the cities data based on selected one or more states, I am unable to pass the multiple Tuples (more than one selected Tuples) as parameter for cities dropdown.
The following is my query for City parameter. It is working well when I select only one State from the dropdown.
However, when I select multiple states, it is unable to convert the Tuple into SET in ELSE part of IIF condition specified in following query.
Can anybody help me how to resolve the error that I am getting about STRTOSET function?
Or
Are there any other alternatives to achieve this requirement?
Any help would be much appreciated.
Query:
WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[City].[City Business].Children ON ROWS
FROM (
SELECT ( STRTOSET(@State, CONSTRAINED) ) ON COLUMNS FROM [Model])
WHERE ( IIF( STRTOSET(@State).Count= 1,
STRTOTUPLE(@State, CONSTRAINED),
STRTOSET("{
("+
[Location].[Code 1].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Code 2].CURRENTMEMBER.UNIQUENAME +","+
[Location].[Descr].CURRENTMEMBER.UNIQUENAME
+ ")
}",CONSTRAINED )) ) CELL PROPERTIES VALUE
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi,
I used following dynamic query in expression of dataset of parameter and it works like a charm.
"WITH MEMBER [Measures].[ParameterCaption] AS [City].[City Business].CURRENTMEMBER.MEMBER_CAPTION "&
"MEMBER [Measures].[ParameterValue] AS [City].[City Business].CURRENTMEMBER.UNIQUENAME "&
"MEMBER [Measures].[ParameterLevel] AS [City].[City Business].CURRENTMEMBER.LEVEL.ORDINAL "&
"SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , " &
"[City].[City Business].Children ON ROWS " &
" FROM [Model] WHERE ({"& join(Parameters!Location.Value,",") &"}) CELL PROPERTIES VALUE"
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

CR2008 report runs in designer but fails when deployed

Hi,
I have a report that was originally developed in CR XI. It worked perfectly fine in CRS XI also. We upgraded the server to CRS2008. But my report does not run on the server now. It gives the error "Invalid field name". However, the report runs fine when run from CR 2008 developer, CR XI and CRS XI. It gives the error when run from CRS2008 or run via a dot.net application.
Any help to resolve this issue is highly appreciated.
Thanks.

Hi Bin,
Post your question in SDK forum.
[NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio;
With following details:
Have you applied any service pack for Crystal Reports?
Visual studio version?
Windows or web application?
Operating system?
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Shweta

SSRS report running very slow but query is very fast in SSMS

Similar Messages

Maybe you are looking for