SSRS subscription creating duplicate job

We have this sporadic problem where when we go in to save an edit on a SSRS report subscription, it gives us a duplicate job number error. When I look at the Jobs in the Agent, there are duplicates, so I need to manually delete both duplicate jobs,
then the subscription save will work. If we delete just 1 of the jobs, the issue seems to clear for a while, but then reoccurs. This has happened to us on multiple reports, but not consistently. The subscriptions look fine. Has anyone
else run into this? Any ideas what is causing this to happen?

I have the issue with version 10.50.1600.1 where one unique subscription ID has created three corresponding SQL jobs with the same name but unique job IDs. When I attempt to execute the job manually via SSMS, i.e. exec
sp_start_job@job_name
=
'0E02285B-4D85-4F5C-92C3-74F44F27B5ED', SQL Server throws the following error:
Msg 14293, Level 16, State 1, Procedure sp_verify_job_identifiers, Line 54
There are two or more jobs named '0E02285B-4D85-4F5C-92C3-74F44F27B5ED'. Specify @job_id instead of @job_name to uniquely identify the job.
So it would be helpful to know the root cause to avoid the same issue in the future.
Thanks,
Ben Lezin
Ben Lezin

Similar Messages

SSRS Subscriptions help

Hello all,
I need help in creating report subscription to run on every Wednesday for Year to last Friday.So we were to generate the report next week, we should generate it for 01/01/2014- 06/06/2014. I am new to SSRS subscriptions. Please help.
Thanks

we should generate it for 01/01/2014- 06/06/2014.
Hi Lshi123,
In Reporting Services, we can create subscription to send report to specified E-mail address on a schedule. However, the execute time on the schedule cannot be the past date. So in your scenario, we cannot create subscription and generate it for 01/01/2014/-06/06/2014.
Here are some link about SSRS subscription for you reference.
http://msdn.microsoft.com/en-IN/library/ms160334.aspx
http://msdn.microsoft.com/en-us/library/ms154020.aspx
http://www.youtube.com/watch?v=sO0Y_IxdE8w
If I have anything misunderstand, please point it out and elaborate your requirement, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

SSRS Subscriptions Issue

Hello All,
After the server migration (old-new are identical servers in all aspects including HardWare) the SSRS subscriptions are having issues.
1. They will run as scheduled but mails are delivered late.
2. They ran on weekends even though it was not scheduled and not triggered from team.
3. Job history is not getting updated when subscription run on weekend.
Workarounds We Did but not solved:
1. SQL Services restarted.
2. SSRS restarted.
3. Manually tested the Subscriptions.
Please advise.
Regards, Pradyothana DP. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

Hi Pradyothana,
According to your description, the subscription doesn’t work fine when you migrate it from old server to a new server.
In your scenario, please use code below to find the corresponding job of the subscription, then check if the schedule both in the subscription and the job is the same.
use ReportServer;
Go
SELECT
c.Name AS ReportName
, rs.ScheduleID AS JOB_NAME
, s.[Description]
, s.LastStatus
, s.LastRunTime
FROM
ReportServer..[Catalog] c
JOIN ReportServer..Subscriptions s ON c.ItemID = s.Report_OID
JOIN ReportServer..ReportSchedule rs ON c.ItemID = rs.ReportID
AND rs.SubscriptionID = s.SubscriptionID
Besides, since you mentioned the email will be delivered on weekends though it hasn’t been scheduled, you could use Reporting Services trace Log File to find which schedule deliveries this report. Please refer to this article:
Troubleshooting Subscriptions: Part II, Using the Reporting Services Trace Log File .
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Data loader : Import -- creating duplicate records ?

Hi all,
does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters of the job looks fine! ->
Duplicate Checking Method == External Unique ID
Action Taken if Duplicate Found == Overwrite Existing Records
but data loader have created new records where the "External Unique ID" is already existent..
Very strange is that when i create the import manually (by using Import Wizard) exactly the same import does work correct! Here the duplicate checking method works correct and the record is updated....
I know the data loader has 2 methods, one for update and the other for import, however i do not expect that the import creates duplicates if the record is already existing, rather doing nothing!
Anyone else experiencing the same ?? I hope that this is not expected behaviour!! - by the way method - "Update" works fine.
thanks in advance, Juergen
Edited by: 791265 on 27.08.2010 07:25
Edited by: 791265 on 27.08.2010 07:26

Sorry to hear about your duplicate records, Juergen. Hopefully you performed a small test load first, before a full load, which is a best practice for data import that we recommend in our documentation and courses.
Sorry also to inform you that this is expected behavior --- Data Loader does not check for duplicates when inserting (aka importing). It only checks for duplicates when updating (aka overwriting). This is extensively documented in the Data Loader User Guide, the Data Loader FAQ, and in the Data Import Options Overview document.
You should review all documentation on Oracle Data Loader On Demand before using it.
These resources (and a recommended learning path for Data Loader) can all be found on the Data Import Resources page of the Training and Support Center. At the top right of the CRM On Demand application, click Training and Support, and search for "*data import resources*". This should bring you to the page.
Pete

SSRS subscriptions in default zone of sharepoint 2013 are not showing in intranet zone and vice versa.

one of the Sharepoint 2013 site collection has alternate access mappings created. Default site is .com and intranet is .local.
So when we add SSRS subscription in .com - they are not showing in .local and vice- versa. How do we fix this so the subscriptions are same in both .com and .local.

Hi spanda,
Per my understanding that you have configured the alternate access mappings which Default site is .com and intranet is .local. But the subscription in one of the site will not list in another mapped site, right?
Actually, if you are on a different Alternate Access Mapping other than the Subscription was created on, we will get no subscriptions, Because we are using the method "Microsoft.ReportServices.SharePoint.UI.ManageSubscriptionPages"
to deal with the logic by creating the value for "m_reportUrl" using the current context of the URL the user is using and passing that to the "SubscriptionListControl". You can find the code in this article if you have some
knowledge of development:
SQL Server Reporting Services ignores Alternate Access Mappings When Checking for Report Subscriptions
I recommand you to submit an feedback at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service
provided.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Multiple Duplicate Jobs in Solution Manager.

Greetings,
We see duplicates of Job CCMS_CPH_AGGR_DATA_UPDATE and CCMS_CPH_RAW_DATA_UPDATE in our Solution Manager.
I understand these jobs are used to transfer data from the CCMS monitoring infrastructure to the associated BI of the SAP Solution Manager. The data is written directly to a number DSOs. Job CCMS_CPH_AGGR_DATA_UPDATE should be scheduled once every day and Job CCMS_CPH_RAW_DATA_UPDATE should be executed every hour.
However, we see huge number or duplicate jobs. I wanted to know if it’s alright to delete the duplicates?
Thank you,
Haseeb Ahmed.

Hi Roland, Thanks for your reply. These jobs are completing successfully and No errors have been recorded. In our Solution Manager System, we see Job CCMS_CPH_RAW_DATA_UPDATE and CCMS_CPH_AGGR_DATA_UPDATE has been created multiple times by user SM_EXTERN_WS. There are like hundreds of same jobs created. Since these are weekly and daily jobs, it does not make sense to keep them all. I wanted to know if its okay to clean-up the duplicates or not? I don't understand why duplicate jobs were created and is there a specific case when once of them will be active? Thanks, Haseeb Ahmed.

Email Recipient limits on SSRS Subscriptions - SharePoint Integrated mode

Hi I hope this is the right forum to post this question in.
I have had a requirement to setup our users to be able to create and manage there own mail delivery SSRS subscriptions, this is not a problem. However I have been asked to set a limit on the number of recipients they can specify in the "To" field,
and I am not sure how to do this.
We are running in SharePoint integrated mode (SharePoint 2010), with SSRS 2008 R2 and I cant find anywhere that I would set this up..... I have had a look through the rsreportserver.config and unable to find any nodes that allow me to set a limit, nor
have I been able to find it online. SharePoint doesnt seem to have anywhere to set this, and it seems to sit within SSRS.
The nearest I have got is someone has suggested that it can be limited on Exchange, but before I go down that route I wanted to find out if it is possible in either SharePoint or SSRS.
Could anybody offer some insight to this?
Thanks
Tim

Hi Tim,
As per my understanding, there is no maximum number of recipients per subscription limitation in Reporting Services. Just as you said, it depends on the SMTP server. For example, Exchange Server 2013 supports 500 recipients as the Recipient limit. This is
the default limit for Exchange Server 2013 organizations. Administrators can change this value for their organization.
References:
Exchange Online Limits
Subscription and Delivery (Reporting Services)
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Procedure which updates duplicate jobs to some new jobs

as i am new to pl/sql i want to create a procedure which updates duplicate jobs to some new jobs without using count and if then else statement.
EMPNO ENAME JOB
7000 ELLISON OWNER
7369 SMITH CLERK
7499 ALLEN SALESMAN
7521 WARD SALESMAN
7566 JONES MANAGER
7654 MARTIN SALESMAN
7698 BLAKE MANAGER
7782 CLARK MANAGER
7788 SCOTT ANALYST
7839 KING PRESIDENT
7844 TURNER SALESMAN
EMPNO ENAME JOB
7876 ADAMS CLERK
7900 JAMES CLERK
7902 FORD ANALYST
7934 MILLER CLERK
i want to update duplicate jobs with each new name which is not replicating
e.g if it is for salesman it should be newjob_s1,newjob_s2,newjob_s3.
Edited by: Aviral on Aug 1, 2011 6:20 AM

Dear Aviral,
refer:- http://www.oracle.com/pls/db102/portal.all_books
please read forum ediquette
Posters, please mind these common-sense rules when participating here:
- When asking a question, provide all the details that someone would need to answer it. Consulting documentation first is highly recommended. - When answering a question, please be courteous and respectful; there are different levels of experience represented here. A poorly worded question is better ignored than flamed - or better yet, help the poster ask a better question.
- It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
- See more tips in the FAQ
Thanks for doing your part to make this community as valuable as possible for everyone!
- OTN

Need to make data driven ssrs subscription?

spent hours on thickets this week
Mike Monday 2.00
Tuesday 2.00
Mark
Monday 3.00
Tuesday 4.00
Lucy
Monday 6.00
Tuesday 7.00
Hello how can I make a data driven subscription which go mike's info to mike only mark info to mark only like that is there any sample code vailable for situation like this sssrs data driven subscription?

Hi MarkSubedi,
Based on your description, you can create an Data-Driven subscription and send email based on the different user you have selectted in the Parameter "UserName" in the report.Before create the data_driven subscription,
please make sure your SSRS edition will support it (Enterprise, Businness Intelligence), More Details:Features Supported by the Editions of SQL Server
Data-Driven subscription indeed can do this. A data-driven subscription can provides a way to use dynamic subscription data that is retrieved from an external data source at run time. It can deliver the report to different destinations,
each of which might receive a different render format of the report and a different set of parameter values on a recurring basis. You must also have a relational table that stores the mapping between destinations(e-mail address or a file share),report settings
and parameter values.
I have tested on my local environment and we can create an subcription delivery table to include an column for the User name and another column for the User related e-mail addresses.When you creating the Data-Driven subscription,you can configure
the subscription by provide the query to this table and assign the values in the query results to special settings in the subscription. Please find the Subcription delivery table you need to create and the steps of Data-Driven subscrition configuration of
using this table.
Subcription delivery table(when you want to modify UserName and e-mail address you can just modify this table but don’t need to do modification in the Data-Driven subscription):
CREATE TABLE TableName
(UserName nvarchar(50),
Mailto nvarchar(50))
INSERT INTO TableName
('Mike','[email protected]'),
('Mark','[email protected]'),
('Lucy','[email protected]'),
Details steps of Data-Driven subscrition configuration of using this table:
Specify a data source that contains the subscription delivery table which created like above.
Specify a command or query that return the list of the user name and the e-mail addresses and then click "Validate" button to make sure query validate successfully, click next.query that return the list of the user name and the e-main addresses
select * from TableName
Specify delivery extension settings for Report Server Email :in the dropdown list select the "Mailto" from TableName, click next.
Specify report parameter values for Report, Check as below and the e-mail will send based on each UserName, click next.
Specify when the subscription is processed by setting the schedule details, click Finish.
Below article for your reference about details steps of
Create Data-driven Subscription:Create Data-driven Subscription Page (Report Manager)
If you still have any question, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Error While creating a Job using JOB_OPEN

Hello,
I am trying to create a job in the output type of a standard transaction.
But the job creation is failing. While debugging the transaction in update mode, I found out that the JOB_OPEN is coming out in the 'COMMIT WORK'.
Is there any other way to create a job so that the program executes properly.
Thanis/Regards,
Abhijit Anandgaonkar.

Hi,
create a RFC function module....and inside the function module...create the batch job..
in the output type processing program...call the RFC function module in background task..
Thanks
Naren

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

Create Background Job after data saved in module

Hello,
I have a program that has a start selection screen with material group, you enter your data, execute. When it has finished you get a ALV of sales order with items where you can make changes to dates and other details and save. I would like to add a save in background option. Is this possible? I assume it would be difficult because of the container.. it uses a bapi to save sale orders...
The employees run this job which takes a little while.. at the end of the day.. they go home and of course SAP has timed out. If they can run it in the background then no problem....
Thanks,
AJ

well, you can pass the data from the same to an other program and submit it in background.
Just create a job.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = gv_jobname
       IMPORTING
            jobcount         = gv_jobcount
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc <> 0.
*   no error required
ENDIF.
submit your program with job name and job count.
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            jobcount             = gv_jobcount
            jobname              = gv_jobname
            strtimmed            = 'X'
       EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
IF sy-subrc <> 0.

Problems creating a job

hi
I have package with a procedure naming do_job which have to create a job using
dbms_job.submit the owner of this package is a user named "HOL" , but when I try to run this package (I create a public synonym for the package and I gave execute grant to "DES") with another user like "DES" does not create the job.
Can any body help me
Thanks

Hi,
For job scheduling tips and samples, you cannot beat Dr. Tim Hall:
http://www.oracle-base.com
He also has a book "Oracle Job Scheduling" with lots of working job scheduling examples, very nice:
http://www.rampant-books.com/book_2005_1_scheduling.htm
HTH . . .
Don Burleson
"root hog or die"

Creating a Job to execute a .sh file

Hi,
I have an important issue creating a Job to execute a .sh file,
the .sh (start_execution.sh) contains a lot of random calls like this:
#!/bin/bash
. /home/crm/.bash_profile
. /home/crm/argentina/crm/crmdw/clusters/mt/mt_pull_push/start.sh
. /home/crm/argentina/crm/crmdw/clusters/ota/ota/start.sh
sqlplus dware/argu01@crmarg @/home/crm/crmdw/AR/exec_dw.sql "MT"
sqlplus dware/argu01@crmarg @/home/crm/crmdw/AR/exec_dw.sql "OTA"
sqlplus dware/argu01@crmarg @/home/crm/crmdw/AR/exec_dm.sql "DAILY_DOWNLOADS"then creating the next job
Begin
dbms_scheduler.create_job
(job_name=>'job_AR',
job_action=>'/home/crm/crmdw/AR/start_execution.sh',
number_of_arguments=>1,
job_type=>'executable',
start_date => SYSDATE,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=20',
enabled=>false,
auto_drop => TRUE,
comments=> 'Run shell-script test_dbms_scheduler.sh');
dbms_scheduler.set_job_argument_value(job_name =>'job_AR', argument_position => 1, argument_value => 'Parameter passed from Oracle to Unix');
dbms_scheduler.enable('job_AR');
end;
/the system executes all process at the same time instead of one to one,
Is necessary the system executes one to one becouse is a Hierarchy of process with
corresponding dependencies.
what could I do to resolve the issue??
any ideas??
Thanks in advanced...

the problem is the content of the .sh file(start_execution.sh) is generated ramdomly and automatically and the code is :
FUNCTION F_GET_EXECUTION_PLAN
    CONN_STRING_TRG VARCHAR2--'dwa/arg@arg'
, EXEC_TEMP_DIR VARCHAR2--'/home/crm/crmdw/AR/'
) RETURN CLOB AS
BEGIN
DECLARE
    v_conn_string_trg VARCHAR2(255);
    v_exec_temp_dir VARCHAR2(255);
    v_select_aux VARCHAR2(32767);
    v_select CLOB := ' ';
    v_process_type VARCHAR2(5);
    v_process_name VARCHAR2(50);
    v_location VARCHAR2(255);
    v_result NUMBER := 0;
    TYPE t_array IS TABLE OF VARCHAR2(255);
    TYPE t_cursor IS REF CURSOR;
    v_array t_array := t_array();
    c1 t_cursor;
BEGIN
    v_conn_string_trg := CONN_STRING_TRG;
    v_exec_temp_dir := EXEC_TEMP_DIR;
    DBMS_LOB.TRIM(v_select, 0);
    DBMS_LOB.APPEND(v_select, '#!/bin/bash' || chr(13) || chr(10));
    DBMS_LOB.APPEND(v_select, BASH_PROFILE || chr(13) || chr(10));
    DBMS_LOB.APPEND(v_select, chr(13) || chr(10));
    v_select_aux := '
      SELECT A.process_type, b.process_name, b.LOCATION
      FROM
        SELECT process_type, process_id, LEVEL level2
        FROM
          SELECT process_type, process_id, dep_process_type, dep_process_id
          FROM crmdw_master_dependencies
          WHERE dependency_type <> ''PREVIOUS_DATE''
          UNION ALL
          SELECT process_type, process_id, NULL, NULL
          FROM
            SELECT ''STG'' process_type, ID process_id
            FROM crmdw_master_stg
            UNION ALL
            SELECT ''DW'', ID
            FROM crmdw_master_dw
            UNION ALL
            SELECT ''DM'', ID
            FROM crmdw_master_dm
            MINUS
            SELECT d.process_type, d.process_id
            FROM crmdw_master_dependencies d
        START WITH dep_process_type IS NULL
        CONNECT BY PRIOR process_type = dep_process_type
        AND PRIOR process_id = dep_process_id
      ) a
      INNER JOIN
        SELECT 1 ordinal, ''STG'' process_type, s.ID process_id, s.process process_name, c.location, s.active
        FROM crmdw_master_stg s
        INNER JOIN crmdw_master_clusters c ON (c.id = s.id_cluster)
        UNION ALL
        SELECT 2, ''DW'', ID, process, ''' || v_exec_temp_dir || ''', active
        FROM crmdw_master_dw
        UNION ALL
        SELECT 3, ''DM'', ID, process, ''' || v_exec_temp_dir || ''', active
        FROM crmdw_master_dm
      ) b ON (A.process_type = b.process_type AND A.process_id = b.process_id)
      WHERE b.active = 1
      ORDER BY b.ordinal, a.level2
    BEGIN
      OPEN c1 FOR v_select_aux;
      LOOP
        FETCH c1 INTO v_process_type, v_process_name, v_location;
        EXIT WHEN c1%NOTFOUND;
        v_result := F_CHECK_NEED_TO_EXECUTE (
                        v_process_type
                      , v_process_name
        IF (v_result = 1) THEN
          IF (v_process_type = 'STG') THEN
            v_select_aux := '. ' || nvl(v_location, '/') || lower(v_process_name) || '/start.sh';
          ELSIF (v_process_type = 'DW') THEN
            v_select_aux := 'sqlplus ' || v_conn_string_trg || ' @' || v_location || 'exec_dw.sql "' || v_process_name || '"';
          ELSIF (v_process_type = 'DM') THEN
            v_select_aux := 'sqlplus ' || v_conn_string_trg || ' @' || v_location || 'exec_dm.sql "' || v_process_name || '"';
          ELSE
            v_select_aux := '';
          END IF;
          IF (v_array.COUNT > 0) THEN
            FOR i IN v_array.FIRST .. v_array.LAST LOOP
              IF ((v_array.EXISTS(i)) AND (v_array(i) = v_select_aux)) THEN
                  v_array.DELETE(i);
                  EXIT;
              END IF;
            END LOOP;
          END IF;
          v_array.EXTEND;
          v_array(v_array.LAST) := v_select_aux;
        END IF;
      END LOOP;
      CLOSE c1;
      FOR i IN v_array.FIRST .. v_array.LAST LOOP
        IF (v_array.EXISTS(i)) THEN
          DBMS_LOB.APPEND(v_select, v_array(i) || chr(13) || chr(10));
        END IF;
      END LOOP;
    EXCEPTION
      WHEN OTHERS THEN
        DBMS_LOB.APPEND(v_select, chr(13) || chr(10));
    END;
    RETURN v_select;
END;
END F_GET_EXECUTION_PLAN;

Creating a job and scheduling a job error in OEM

Hi, Everyone,
I am trying to create and schedule a job thru OEM. In the the pl/sql block provide i have given my code like this
begin
SET SERVEROUTPUT ON;
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND;
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
SPOOL OFF;
end;
i have created the job and scheduled it but i am getting this error:
Error # 6550
Details ORA-06550: line 2, column 5: PL/SQL: ORA-00922: missing or invalid option ORA-06550: line 2, column 1: PL/SQL: SQL Statement ignored ORA-06550: line 3, column 7: PLS-00103: Encountered the symbol "C" when expecting one of the following: := . ( @ % ;
could anyone pls help as this is very urgent.
Thanks in advance

Ah, the problem is you are confusing SQLPlus commands with PL/SQL.
SET SERVEROUTPUT ON; -- This is a SQLPlus command, not necessary here.
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND; -- This is a SQLPlus command, in PL/SQL to write out to a file you will need to call the UTL_FILE package to open a file for writing to. Except that the file you write to will appear on the database server, not your workstation, when the scheduled job runs.
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL; -- In PL/SQL you need to SELECT columns INTO variables FROM tables. But in fact I guess you want to write the time to file using UTL_FILE again. However, you don't really need to do this, since scheduler will log the start time and run duration itself.
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910); -- This is the SQLPlus equivalent of the PL/SQL command:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
SPOOL OFF; -- This is a SQLPlus command, not necessary here.
So to summarise, all you really need is:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
And the scheduled job will log the start time and duration in the database, which you can find here:
SELECT * FROM USER_SCHEDULER_JOB_RUN_DETAILS

SSRS subscription creating duplicate job

Similar Messages

Maybe you are looking for