ST03 on 46C/HP-UX/Cluster -   Statistics not Updated.

Hi all,
We had a cluster, 4 physical servers / 14 SAP Instances.
We are managing a strange problem regarding the ST03 workload analysis, since not all instances are update to the same time.
Example:
ST03 -> Perfomance database ->
TOTAL                         12.01 23:59
host_1_<SID>_01         Today 07:01
host_1_<SID>_02         Today 16:06
host_1_<SID>_03         Today 16:06
host_1_<SID>_04         Today 16:06
host_2_<SID>_01         Today 07:00
host_2_<SID>_02         Today 16:06
host_2_<SID>_03         Today 16:06
host_2_<SID>_04         Today 16:06
host_3_<SID>_01         Today 06:05
host_3_<SID>_02         Today 16:06
host_3_<SID>_03         Today 16:06
host_3_<SID>_04         Today 16:06
host_4_<SID>_01         Today 16:06
host_4_<SID>_02         Today 16:06
sapgni_GNI_00              Today 16:06
Sometimes they delays could be of one day!
Example:
host_1_<SID>_01         Today 07:01
host_1_<SID>_02         Today 16:06
host_1_<SID>_03         Today 16:06
host_1_<SID>_04         Today 16:06
host_2_<SID>_01         14.01.2009 06:05
host_2_<SID>_02         Today 16:06
host_2_<SID>_03         Today 16:06
host_2_<SID>_04         Today 16:06
host_3_<SID>_01         Today 06:05
host_3_<SID>_02         Today 16:06
host_3_<SID>_03         Today 16:06
host_3_<SID>_04         Today 16:06
host_4_<SID>_01         Today 16:06
host_4_<SID>_02         Today 16:06
sapgni_GNI_00              Today 16:06
The following notes are related with this problem:
Note 127642 - RSCOLL00 Tuning COLLECTOR_FOR_PERFOMANCEMONITOR
Note 12103 - Contents of the TCOLL table
Note 6833 - Deleting statistics file, size of statistics file
Jobs:
SAP_COLLECTOR_FOR_PERFMONITOR until yesterday it was running each hour, now we chance it to run each 2 hours, the idea: We think one hour is no sufficient for the collector to read all the stat file, so there a lot of lock over this file.
Our Tcoll table have this:
                   Mo    We    Fr    Su  0     2     4     6     8    10    12    14    16    18    20    22                                                                               
RSDBPREV  X  X  X  X  X  X  X  X     X     X     X     X     X     X     X     X     X     X     X  
RSHOSTDB  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSHOSTDC  X  X  X  X  X  X  X                 X                       X                          X  
RSHOSTPH  X  X  X  X  X  X  X                                                           X           
RSORA811  X  X  X  X  X  X  X                                      X                    X           
RSORAHCL                       X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSORAPAR  X  X  X  X  X  X  X                          X              X                 X           
RSORATDB  X  X  X  X  X  X  X                       X                                      X        
RSORAWDB                    X                                      X                                
RSRFCDLT  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSRFCDMN  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSSDBDLY  X  X  X  X  X  X  X     X                                                                 
RSSTAT60  X  X  X  X  X  X  X           X        X        X     X        X     X        X        X  
RSSTAT81  X  X  X  X  X  X  X                                                     X                 
RSSTAT83  X  X  X  X  X  X  X  X  X  X     X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSSTAT87  X  X  X  X  X  X  X  X  X  X     X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSSTAT90  X  X  X  X  X  X  X  X     X     X     X     X     X     X     X     X     X     X     X  
RSSTAT98  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X  X
RSSTATPH  X  X  X  X  X  X  X                                X                                      
RSTUNE80  X  X  X  X  X  X  X                                         X    
Our performance database configuration:
ST03 -> Goto -> Parameters -> Performance database  
Workload Analysis: Parameters Relevant to MONI Reorg.                                              
Statistical data to be cumulated & Controls for the collector
Cumulate data for weeks & month: CHECK
Cumulate hitlists (TopTime & TopRequests)    CHECK
Cumulate memory profile                               CHECK
Cumulate accounting & client profile               CHECK
Cumulate RFC profiles                                   CHECK
Cumulate terminal in/out messages (Req. bytes profile) CHECK
Cumulate server statistics for total system-wide stats CHECK (We activated this two yesterday)
Options for reorganizing statistical data (for all servers)
Delete seq.statfile after cumulation if size > 100 MB (sometimes there are stat files with size > 100 MB!! )
Max. no. of records cumulated per  600.000
Options for reorg of  application statistics data (valid for all servers)
Delete appl.statfile after cumulation if size if > 100 MB
Max. number of records cumulated per call 600.000
By the way, what does mean cumulation?
Delete seq.statfile after cumulation if size > 100 MB
It means that the stat file was complete read by the collector?
Best Regards,
Erick Ilarraza

Hi Yoganand Vedagiri,
Wonderful Observation! Thanks a lot.
In Venezuela last year the time Zone change from: UTC-4 to UTC-43.
In our productive XXX client / users are set to UTC-43. System time is UTC-43.
But in the client 000 the time is set to UTC-4!!!
User DDIC on client 000 is set to UTC-4 Too.
Since the SAP_COLLECTOR_FOR_PERFMONITOR job is scheduled on the client 000 with user DDIC, there is something wrong...
In this moment we can't chance this setting until the next maintenance.
Please could you explain to me how this problem (UTC-4 vs UTC-43) can impact the Job SAP_COLLECTOR_FOR_PERFMONITOR running on the client 000? Maybe this is one of the root-caused of the problem.
Today we get this:
Server                  Last record  
TOTAL                       15.01 23:59  
Host1_<SID>_01        Today 07:02   -> 2 Hours of delay.
Host1_<SID>_02         Today 09:04  
Host1_<SID>_03         Today 09:04  
Host1_<SID>_04         Today 09:04  
Host2_<SID>_01        Today 07:02   -> 2 Hours of delay
Host2_<SID>_02         Today 09:05  
Host2_<SID>_03         Today 09:05  
Host2_<SID>_04         Today 09:04  
Host3_<SID>_01        Today 06:05   -> 3 Hours of delay.
Host3_<SID>_02         Today 09:05 
Host3_<SID>_03         Today 09:05 
Host3_<SID>_04         Today 09:05 
Host4_<SID>_01         Today 09:05 
Host4_<SID>_02         Today 09:05 
On the other hand i found this log:
ST03 -> Enviroment -> Data Collector -> Stat. Rec. log
You get this: 16.01.2009   Several different errors occured
Double Click on the red line...
Click on File read info
Display Log on 16.01.2009
last record for the Host1_<SID>_01 and  Host2_<SID>_01 was at 08:31 a.m you get this record:  AS: No new records found in statistic file
last record for the Host3_<SID>_01   was at 07:31 a.m you get this record:  AS: No new records found in statistic file
For the others servers you get this:  Records successfully read
Best Regards,
Erick Ilarraza

Similar Messages

  • Contact statistics not updated while using campaign automatization

    Hi everybody,
    I m now working on campaign automatization. One campaign element within the workflow was specified to "adding BP in target group". After executing the workflow , the correspoding target group shows nothing in the contact statistics (we use WebGUI). It means, that NO new data was added in the table CRMD_IM_ML_head and CRMD_IM_ML_ITEM. But actually the BP has been sucessfully added in that target group as we expected. 
    On the contrary one another campaign element specified with "transfering reactor to channel" has all the complete and correct contact statistics.
    Does anybody know, why nothing was added in the CRMD_IM_ML_head and CRMD_IM_ML_ITEM?
    Did anybody experience this
    Thank a lot
    Yang

    This is because I think the campaign is not transfered to channel for execution, so data is not populated in the mentioned tables.
    If you execute the campaign automation with another workflow which is for sending the target group to channel then you will get the data in tables.

  • Any samples for using JMX for displaying cluster statistics 3.6 ?

    Hi,
    Our Coherence 3.6 cluster is configured in the WLS domain and controlled using WLS node manager. This is all working well. We have created a WLS console extension to show the actual live cluster topology (rather than the configured topology) so we can ensure all the domains are configured correctly and there are no nodes in the cluster that there should not be (we have many domains/environments).
    I can show basic cluster statistics and show the members etc using the CacheFactory. But for each cluster member I would like to show if it is storage enabled and free memory and other statistics. I was expecting to get that from the Member or Cluster objects returned from the CacheFactory methods but it seems not. It seems that JMX is the way to go. Does anyone have any sample JMX code they might share that would connect to the cluster and retrieve stats and info that is not available from the CacheFactory api ?.
    TIA
    Martin

    Hi Revanth,
    The issue seems to be with the JMX URL value defined in the 'server URL' property.
    Apparently I ran into the same issue as I was unable to access the Admin Server URL from the SMA.
    Changing the Host and Port value properly resolved the issue for me.
    Regards,
    Anandraj

  • How to read data from a CLUSTER STRUCTURE not cluster table.

    Hi,
    how to read data from a CLUSTER STRUCTURE not cluster table.
    regards,
    Usha.

    Hello,
    A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
    Regards,
    Mansi.

  • SAP database tables - Column statistics not found for table in DB02 - During import, inconsistent tables were found - Some open conversion requests still exist in the ABAP dictionary.

    Hi Experts,
    I'm implementing SAP note 1990492 which requires manual implementation. Implementation includes modifying standard tables (i.e. append
    the structure FIEU_S_APP_H to table FIEUD_FIDOC_H). After this I've adjusted the table in SE14 (Database Utility). I've done checks in SE14 and it shows the table is consistent.
    But during DB02 -> Space folder -> Single table analysis -> Input table name -> Indexes tab -> Upon clicking statistics, there is a warning "Column statistics not found for table".
    Our basis team is implementing an Add-On in the development system related to RWD Context Sensitive Help. They cannot proceed due to the following inconsistencies found in the table.
    Screenshot error from the activity:
    Screenshot from DB02:
    I'm an ABAP developer and have no other ideas on what to do. Thanks in Advanced.

    Hi All,
    We were able to fix the issue through the following:
    1. Call transaction
    SE14.
    2. Enter the name of
    the table and choose "Edit".
    3. Choose
    "Indexes".
    4. Select the index
    and choose "Choose (F2)".
    5. If you choose
    "Activate and adjust", the system creates the index again and it is
    consistent.
    6. Check the object
    log of this activation.
    7. If an error
    occurs, eliminate the cause and reactivate the index.

  • In cluster or not ?

    Hi,
    on 10g R2 on HP Unix :
    I'm begining to administer a new database
    in alertlog I have :
    ORA-29702: error occurred in Cluster Group Service operationBut when :
    srvctl status service -d MYDB
    PRKR-1001 : cluster database MYDB does not exist
    PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: MYDBAre we in cluster or not ? Any other way to verify ?
    Thank you.

    ORA-29702: error occurred in Cluster Group Service operation
    # problem
    SQL> startup nomount;
    ORA-29702: error occurred in Cluster Group Service operation
    29702, 00000, "error occurred in Cluster Group Service operation"
    // *Cause: An unexpected error occurred while performing a CGS operation.
    // *Action: Verify that the LMON process is still active. Also,
    // check the Oracle LMON trace files for errors.
    # cause - cloned a RAC ORACLE_HOME to a server with no CRS
    # solution
    cd $ORACLE_HOME/rdbms/lib
    make -f ins_rdbms.mk rac_off
    make -f ins_rdbms.mk ioracle
    source:-http://blog.contractoracle.com/2009/08/ora-29702-error-occurred-in-cluster.html

  • Ucs 6248 HA cluster can not login

    6248-A manager ip1.1.1.2
    6248-B manager ip1.1.1.3
    cluster VIP 1.1.1.1
    cisco6248-A# show cluster extended-state
    Cluster Id: 0xd59a70527a4111e2-0x8b74547feebbcd64
    Start time: Sat Feb 23 12:44:03 2013
    Last election time: Sat Feb 23 12:55:11 2013
    A: UP, PRIMARY
    B: UP, SUBORDINATE
    A: memb state UP, lead state PRIMARY, mgmt services state: UP
    B: memb state UP, lead state SUBORDINATE, mgmt services state: UP
       heartbeat state PRIMARY_OK
    INTERNAL NETWORK INTERFACES:
    eth1, UP
    eth2, UP
    HA READY
    Detailed state of the device selected for HA storage:
    Chassis 1, serial: FOX1618GW6D, state: active
    Chassis 2, serial: FOX1625GAB0, state: active
    Chassis 3, serial: FOX1613G1LV, state: active
    MY PC IP 1.1.1.10 can ping all 1.1.1.1/2/3.and https all
    but when i reload 6248-A ,can not ping 1.1.1.1,but can ping 1.1.1.3.
    also can not https://1.1.1.1  (login error:failed login info:ucsm is not available on secondary node)
    when 6248A reload ok,can ping 1.1.1.1/2/3,and https all
    if fi6248 cluster is not ok?

    Hello,
    When you reload FI-A ( active primary ) , virtual IP is owned by FI-B, and should be become primary. Once it becomes primary, you should be able to access UCSM or SSH into FI via Virtual IP address ( 1.1.1.1 ).
    1) How are these FI mgmt ports connected to upstream switch / L3 gateway ?
    2) Are you able to SSH into FI-B with 1.1.1.1 ( when FI-A is reloading ) ?
    3) Have you configured any mgmt interface monitoring policy ?
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101010.html#d75788e1551a1635
    Padma

  • Two node cluster - disk not responding to selection

    I'm building 2 node cluster (Solaris 10/SC3.2) on Dell's 1950/PERC6i servers with quorum as a virtual server. Because I need to introduce quorum server to the cluster - my cluster nodes are still in install mode.
    I have tried to add quorum using scsetup or clsetup but I'm getting always the same message:
    root@node01:~# scsetup
    Failed to get node zone list
    Failed to get node zone list
        This program has detected that the cluster "installmode" attribute is
        still enabled. As such, certain initial cluster setup steps will be
        performed at this time. This includes adding any necessary quorum
        devices, then resetting both the quorum vote counts and the
        "installmode" property.
        Please do not proceed if any additional nodes have yet to join the
        cluster.
        Is it okay to continue (yes/no) [yes]?  yes
    Unable to establish the list of cluster nodes.
    Press Enter to continue:Also the most imortant issue is that immediately after restart of the first node during scinstall procedure, I started to getting those follwing messages:
    Feb  4 17:33:20 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
    Feb  4 17:33:20 node01      disk not responding to selection
    Feb  4 17:33:21 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
    Feb  4 17:33:21 node01      disk not responding to selection
    Feb  4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@1,0 (sd4):
    Feb  4 17:26:46 node02      disk not responding to selection
    Feb  4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
    Feb  4 17:26:46 node02      disk not responding to selectionBoth nodes are extreamly slow, I could use only telnet to login because of long timeouts for many services.
    Here is output from: cfgadm -l
    root@node01:~# cfgadm -al
    Ap_Id                          Type         Receptacle   Occupant     Condition
    c0                             scsi-bus     connected    configured   unknown
    c0::dsk/c0t0d0                 disk         connected    configured   unknown
    c0::dsk/c0t1d0                 disk         connected    configured   unknown
    c4                             fc           connected    unconfigured unknown
    c5                             fc           connected    unconfigured unknown
    usb0/1                         unknown      empty        unconfigured ok
    usb0/2                         unknown      empty        unconfigured ok
    usb1/1                         unknown      empty        unconfigured ok
    usb1/2                         unknown      empty        unconfigured ok
    usb2/1                         unknown      empty        unconfigured ok
    usb2/2                         unknown      empty        unconfigured ok
    usb3/1                         unknown      empty        unconfigured ok
    usb3/2                         unknown      empty        unconfigured ok
    usb4/1                         usb-hub      connected    configured   ok
    usb4/1.1                       usb-device   connected    configured   ok
    usb4/1.2                       usb-device   connected    configured   ok
    usb4/2                         unknown      empty        unconfigured ok
    usb4/3                         unknown      empty        unconfigured ok
    usb4/4                         unknown      empty        unconfigured ok
    usb4/5                         usb-hub      connected    configured   ok
    usb4/5.1                       unknown      empty        unconfigured ok
    usb4/5.2                       unknown      empty        unconfigured ok
    usb4/5.3                       unknown      empty        unconfigured ok
    usb4/5.4                       unknown      empty        unconfigured ok
    usb4/6                         unknown      empty        unconfigured ok
    usb4/7                         unknown      empty        unconfigured ok
    usb4/8                         unknown      empty        unconfigured okHow to solve those two problems? This one with SCSI issue and a problem with node list...
    Best regards,
    Vladimir

    During a last weekend I have reinstalled both nodes. I rebuild virtual disks (LUNs) under PERC 6i controller. I have chosen RAID0 instead of RAID1 as it was before. Still I'm not sure did RAID0 help me or just a rebuilding disks. MegaCli tool from LSI could not help me and tell what was wrong with disk/partitions that I used with first try. For MegaCli status of controller was without errors.
    Probably something was wrong with this partitioning. I used also as in first try Solaris 10 with latest patches 01/2009 and Sun Cluster 3.2 also with latest security patch.
    After reinstalling everything is almost fine :-). The only difference with other productive clusters (the patch level of Solaris & SUN Cluster is not as not this test cluster) is that cacao container agent is offline:
    offline        Feb_07   svc:/application/management/common-agent-container-1:default
    because of that I have following service as disabled:
    disabled       Feb_07   svc:/system/cluster/rgm:default
    Does anyone knows, how serious is this? And how to enable now svc:/application/management/common-agent-container-1:default?
    Here is svcs -xv output:
    svc:/application/print/server:default (LP print server)
    State: disabled since Sat Feb 07 10:42:05 2009
    Reason: Disabled by an administrator.
       See: http://sun.com/msg/SMF-8000-05
       See: man -M /usr/share/man -s 1M lpsched
    Impact: 2 dependent services are not running:
            svc:/application/print/rfc1179:default
            svc:/application/print/ipp-listener:default
    svc:/system/cluster/rgm:default (Resource Group Manager Daemon)
    State: disabled since Sat Feb 07 10:42:06 2009
    Reason: Disabled by an administrator.
       See: http://sun.com/msg/SMF-8000-05
    Impact: 1 dependent service is not running:
            svc:/application/management/common-agent-container-1:default
    svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
    State: offline since Sat Feb 07 10:42:07 2009
    Reason: Dependency svc:/application/management/sunmcagent:default is absent.
       See: http://sun.com/msg/SMF-8000-E2
    Impact: This service is not running.Regards,
    Vladimir

  • ERROR 2009-05-24 08:46:36 CJS-00288 Could not update database statistics.

    Hi all.
    i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
    ERROR 2009-05-24 08:46:44
    CJS-00288  Could not update database statistics.<br>
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.<br>SOLUTION: See brconnect.log for details.
    when i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance DB5 failed
    BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
    Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
    please help me
    Thanks
    Senthil

    Hi All,
    Thanks for your help, that error it has passed but now in 31 st step starting RFC jobs
    i get this error
    ERROR 2009-05-25 18:08:05
    FRF-00007  Unable to open RFC connection.
    ERROR 2009-05-25 18:08:05
    FRF-00063  RFC logon failed with message: Failed: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failedConnect_PM  GWHOST=CTSINSAPEC5, GWSERV=sapgw00, ASHOST=CTSINSAPEC5, SYSNR=00
    but early during the last error update database statistics the SAP MMC console was up and running but now SAP is down during this error
    i tried to start SAP manually but it never works dispatcher goes down, i searched in forums and thought to update the kernal, so i updated the kernal also and tried it then also same error
    please help me my situation is very pathatic, i will be greatful if you help me
    Thanks
    Senthil

  • ERROR 2008-04-30 09:10:35 CJS-00288 Could not update database statistics.

    Hi Gurus..
    Hi i am in the middle of NW 2004  installation . At the step 29 database update statistics, system stops giving error
    ERROR 2008-04-30 09:10:35
    CJS-00288 Could not update database statistics.
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
    3.SOLUTION: See brconnect.log for details.
    When i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance P47 failed
    BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is desinged to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instantclient or to downgrade your db tools (brt* tools)......  Through :Forums I came to know that we have to downgrade  the br*tools to
    Could you please help me how to downgrade the Brtools.
    It's urgent.
    Points will be awarded .
    Regards
    Jan.

    Hi janakiram
    Now i am facing the same error which you have faced before, have you solved that issue if it so could you pls help me how to solve this
    Hi All,
    i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
    ERROR 2009-05-24 08:46:44
    CJS-00288 Could not update database statistics.
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.
    SOLUTION: See brconnect.log for details.
    when i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance DB5 failed
    BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
    Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
    please help me
    Thanks
    Senthil

  • Creating an OSB cluster but not with Configuration Wizard

    Hi experts,
    I would like to create an OSB cluster but not with Configuration Wizard. So my scenario for creating OSB cluster is:
    - create an AdminServer with Configuration Wizard
    - log into Administration Console and create two machines and a cluster
    - start node managers
    - configuration for starting servers automatically with node managers
    After these steps I have a cluster with 2 managed servers which will start with the node manager. However these managed servers are appropriate for deploying normal Java applications but not OSB components...
    My questions is what should I do with these managed servers to be able to deploy OSB components onto them?
    Or can I create an OSB domain only with Configuration Wizard?
    Thanks,
    V.
    Edited by: RickFlair on May 13, 2012 1:10 PM

    Hi Pierluigi,
    Thanks for the answer!
    When I created the domain (with Configuration Wizard) I could set that the domain should be an OSB domain so I think I don't need this template afterwards.
    If I create an OSB domain (with Configuration Wizard) with one AdminServer in it and later I add managed servers on the admin console then I get this message on the OSB Administration Console: Unable to obtain metrics data from the server. It means that something is wrong with the managed servers I can't use them properly.
    However if I create an AdminServer and managed servers with Configuration Wizard then I don't get this error (or warning?) message.
    Could you help me why it is?
    Thanks,
    V.

  • CF 7 cluster does not respond to configuration changes

    I am evaluating the clustering capabilities of CF 7 in order
    to upgrade our current CF6 + ClusterCats cluster.
    I installed CF7 (enterprise edition – multiserver) in
    two physical servers (Win 2003). On each server I created one
    instance of CF and successfully registered the remote instance on
    each server. Then, I configured the cluster on the first server,
    selecting the weighted random algorithm for load balance and
    session replication. Then, I used the webserver configuration tool
    to bind the cluster to each IIS server.
    The cluster worked properly, balancing the load between the
    two cf instances, but when trying to find a way to temporally
    restrict the load on one server for maintenance purposes I found
    that the cluster does not respond to cluster configuration changes.
    I changed the load to 0-100% using the coldfusion administrator
    interface but it did not work. The cluster still sends requests to
    the “restricted” instance. I even eliminated that
    instance from the list of instances that integrates the cluster,
    but it did not affect the behavior of the cluster. The eliminated
    instance still serves request from the cluster. I even eliminated
    the remote instance register and nothing… the cluster still
    balancing the load between the two instances that originally
    integrated the cluster.
    I do not understand how this is supposed to work. Does the
    cluster configuration interface works only when creating the
    cluster? When the changes in the cluster configuration performed
    from the CF admin interface should be reflected by the behavior of
    the cluster? What is the recommended procedure to temporally
    restrict one instance from the cluster without stopping the
    service?
    I appreciate your help
    Eduardo

    Thanks for the information Jochem. I am afraid that these are
    not good news. If I have to restart the webserver in order to
    change the load balance, some requests in progress could be lost.
    My current configuration is composed by two physical severs,
    each one running a web server and a coldfusion instance. We balance
    the load between both webservers using hardware load balancing.
    This is the procedure that I have to follow in order restrict one
    instance without loosing any request:
    1.- Change server weight using Coldfusion admin interface
    2.- Configure hardware load balance to restrict server 1
    3.- Restart webserver at server 1
    4.- Configure hardware load balance to enable server 1 and
    restrict server 2
    5.- Restart webserver at server 2
    6.- Configure hardware load balance to enable server 2
    A similar procedure should be followed in order to enable the
    restricted instance. I know that I can do it for 2 servers; but,
    how is it handled in larger clusters? Is there a better procedure
    to restrict one instance without missing requests?
    Eduardo

  • Cluster does not work after a while

    Hi :
              I have 2 clustered EJB server, the IP address is 192.168.0.226 and
              192.168.0.227.
              A servlet server is calling these two EJB servers with
              t3://192.168.0.226,192.168.0.227:7001
              All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
              If I restart weblogic service, then the cluster works fine. but after while
              the cluster does not work, all the client request goto only one machine, in
              most case it's 227.
              It has no use even if I restart the service in the losted server. I have to
              restart all the server.
              The weblogic.log in the losted server is like this :
              Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
              peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1] gone:
              weblogic.rjvm.PeerGoneException:
              - with nested exception:
              [java.io.EOFException]
              Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
              peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1] gone:
              weblogic.rjvm.PeerGoneException:
              - with nested exception:
              [java.io.EOFException]
              Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a closed
              connection
              Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
              weblogic.rmi.ConnectException: Attempt to sendMsg using a closed connection
              Please help me
              thanks
              andrew
              

    Are you running with any proxy? Is the servlet server also the static httpd
              server?
              What type of network equipment are you using? If its high-end (Cisco) make sure
              all ports are set to 100/Full.
              Also, try setting the SendDelay slightly higher (ie. 25, 30, 35). Experiment
              with different values.
              weblogic.cluster.multicastSendDelay=25
              andrew wrote:
              > Mike, thanks for reply
              > The 192.168.0.204 is the servlet server.
              > I changed the NICs to use 100Mbps/Full duplex. it looks better: the error
              > msg is less than before, the it still happened.
              > Any suggestion?
              > thanks
              > andrew
              >
              > "Mike Kincer" <[email protected]> wrote in message
              > news:[email protected]...
              > > Which box is 192.168.0.204 ??
              > > It is communicating via multicast, which I would say is suspect.
              > > Otherwise, I'd say you have some network issues.
              > > Make sure all switch ports and all NICS are NOT set to "auto" config.
              > Select
              > > 100Mbps/Full duplex on all ports.
              > >
              > > andrew wrote:
              > >
              > > > Hi :
              > > > I have 2 clustered EJB server, the IP address is 192.168.0.226 and
              > > > 192.168.0.227.
              > > > A servlet server is calling these two EJB servers with
              > > > t3://192.168.0.226,192.168.0.227:7001
              > > >
              > > > All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
              > > >
              > > > If I restart weblogic service, then the cluster works fine. but after
              > while
              > > > the cluster does not work, all the client request goto only one machine,
              > in
              > > > most case it's 227.
              > > >
              > > > It has no use even if I restart the service in the losted server. I have
              > to
              > > > restart all the server.
              > > >
              > > > The weblogic.log in the losted server is like this :
              > > >
              > > > Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
              > > > peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1]
              > gone:
              > > > weblogic.rjvm.PeerGoneException:
              > > > - with nested exception:
              > > > [java.io.EOFException]
              > > > Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
              > > > peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1]
              > gone:
              > > > weblogic.rjvm.PeerGoneException:
              > > > - with nested exception:
              > > > [java.io.EOFException]
              > > > Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a
              > closed
              > > > connection
              > > > Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
              > > > weblogic.rmi.ConnectException: Attempt to sendMsg using a closed
              > connection
              > > >
              > > > Please help me
              > > > thanks
              > > > andrew
              > >
              > > --
              > > /\/\i|<e
              > >
              > > Mike Kincer
              > > Solutions Developer/Engineer
              > > Atlas Commerce "ebusiness evolved"
              > > Office phone: +1-607-741-8877
              > > mailto:[email protected] [http://www.atlascommerce.com]
              > >
              > >
              /\/\i|<e
              Mike Kincer
              Solutions Developer/Engineer
              Atlas Commerce "ebusiness evolved"
              Office phone: +1-607-741-8877
              mailto:[email protected] [http://www.atlascommerce.com]
              

  • DST: the SQL Cluster did not change the time by itself..

    Hello,
    DST: the SQL Cluster did not change the time by itself..
    Where should I look for the issue. The time was changed manually to continue processing....
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi,
    Thanks for your posting.
    For the Sql cluster issue, i think you may ask in:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
    Regards.
    Vivian Wang

  • Labview graph scale labels do not update

    I am using XScale.NameLbl.Text and YScale.NameLbl.Text graph properties to programmatically change the labels on the X & Y axis. It seems to work when I run the subVI containing the graph, but when the subVI is placed in an application, they do not update based on the plot data that is selected to be plotted.
    Attachments:
    WC3000_Histogram_Plots.vi ‏96 KB

    I think I understand your question. Your subvi has the waveform wired as an output. In the main vi that calls the subvi, you wire the output to a graph - correct? So you're looking for the graph properties in the subvi to be transfered to the main vi graph - correct?
    If this is correct - it doesn't work that way. The waveform is just a cluster of t0, deltat, and the y array of data. None of the graphs properties are passed out of the subvi.
    There are many ways to do what you're trying to do. You could wire the returned strings that you use for x and y labels as outputs of the subvi, then update the property node of the main vi graph. You could also pass a reference to the main vi graph to the subvi and make the x and y label changes to the main vi graph in
    the subvi. I think the first option is probably easier.
    Tim

Maybe you are looking for

  • How can I export text messages from Companion?

    Dear all! I have a number of old text messages which I would like to keep for the future. They are already erased from my tiny phone memory (I have an old SE "Cybershot"). So, right now they are only accessible via PC Companion. But: This only works

  • Recovery Disk Creator (Express Media Player)

    Hello, This is my first visit to these forums.  I bought my Toshiba Satellite A105-S4284 laptop back in November 2006 from CompUSA.  Recently, I had to take my laptop to a local repair shop because I updated McAfee and the desktop froze-  this is jus

  • Black brush on layer mask not working. Please help/

    I have been using CS6 for a while now.  CS 6 decided that I can't use my black brush on a white layer mask. At all. I can use the white one on a black mask, but not the black one I.  I restarted the computer, but I am annoyed. Has anyone has this pro

  • How to insert data coming from 2 different file adapters in to one DB adapt

    Hi i want insert data in to database containing two diffferent tables, so i imported tables in to DB adapter by creating relation ships.But, data for two tables are in xml format & two are in different locations.So, i used 2 file adapters to get data

  • Rounding the aggregate function in a pivot table

    How do I round the avg(GRADE) when I tried just wrapping it around the avg function I get an error message saying expect aggregate function inside pivot operation pivot ( avg(GRADE) for Column in ('1012222','2221112','333113' ); Thanks for the help.