ST03N - missing Application Server Statistics

One of our SAP system has 7 application servers and out of which only 5 application server statistics is available through Wprkload ST03N, 2 application servers are entirely missing in the ST03N transaction.
When I explicitly logon into the application servers(which are not shown in ST03N) and try ST03 and to check today's statistics, it shows another servers statistics - Can anyone kindly explain why?
SAP System is 4.6c running in Solaris 9 , with Database as Oracle 9.2.0.8
Thanks in advace.
Regards,
Suresh

check the time zones in 000 and prd client,whether all are same??

Similar Messages

  • ST03 Visualization Issue - Application Server Missing

    Hi Gurus.
    I've a strange issue related to the Workload analysis.
    When I call transaction ST03N I see in the the workload only the Central Instance.....Application Server is missing.
    I've checked the SAPWLSERV table and both server are listed here.
    What I'm noticing is that no entry are found in table SWNCMONI nor in SWNCMONIINDEX.
    Well, it's not correct at all...I found an old entry of last february, but nothing more!
    Already checked the time_zone also....everything seems to be corretly configured.
    Any Ideas?
    Thanks in Advance,
    Marco

    Problem seems to be with report : RSSTAT98 ,
    Check the following notes:
    Note 966309 - Contents of table TCOLL in SAP_BASIS 700   (schedule of report RSSTAT98)
    Note 1135491 - RSSTAT98 - Inconsistent host name when setting up SAPWLSERV
    If it was visible earlier and vanished one fine day , pls let us know if there was any kernel upgrade performed?

  • OPEN DATA SET to write files in application server folder - some of the files are missing

    Hi,
    I'm using OPEN DATASET statement in batch job to write the files in application server. what i'm experiencing is when i schedule the batch job all the files are not writing into the folder.
    If i run the report again to write the missed files, the files are writing into the application server folder.
    after opening the dataset, i'm closing it. do we need to give any delay between creation of the files? or until the first write operation is done, 2nd one can't start ..how can we achieve this.
    Thanks for your help in advance.
    Thanks,
    Adi.

    Hello Bathineni,
    Are you using the sy-subrc check after the OPEN DATASET statement.
    If not use a sy-subrc check and transfer the contents to file only when the OPEN DATASET returns value sy-subrc = 0.
    if sy-subrc is 8 repeat the same loop say for 3 attempts until the OPEN DATASET becomes 0.
    DO 3 TIMES. <---- put any number of attempts as you need
    OPEN DATASET.
    IF sy-subrc = 0.
       TRANSFER contents to file.
       EXIT.
    ENDIF.
    ENDDO.
    CLOSE DATASET.
    Regards,
    Thanga

  • Application Server 10 g Load Handling statistics

    Hi,
    We are in planning stage, to deploy multiple applications used by our organization onto Oracle 10 g Application Server am scratching my head on designing appropriate infrastructure for these applications.Can any one please guide me to a document , where I can see some input on Load Handling capabilities of this Oracle 10 g Application Server ? ( I would like to know , for example we need 2 application servers in a cluster for handling 100000 users , kid of ) statistics.
    Thanks in advance.
    Giri.

    Hi,
    I too am facing the same issue.
    Please do lemme know if you have found anything abt this.
    Thanks in advance.
    Regards,
    Sindhiya V.

  • Oracle application server availability statistics

    Hi!
    Does anyone know if it's possible to obtain availability statistics of application server applications?
    I'd like to be able to, at the end of each year, say the application was available to the public eg. 98% of the time.
    I'm running application server 10.1.3.1 on SUSE Enterprise Linux 10.
    I have the enterprise manager but I can't see this option anywhere.
    Thanks!

    You may can get this statistics using AgreSpy but you won't get a record of older statistic. You may want to read this doc. Chapter 2.
    Link:[http://download.oracle.com/docs/cd/B14099_19/core.1012/b14001/monitor.htm#sthref71]
    Greetings.

  • Missing CRLF in file created on application server

    Hello,
    We have a requisite to create a file on the Application Server (AS/400) with CRLF at the end of every record. The records are stored in this structure:
    - OUTPUT: CHAR655, text to export;
    - LENGTH: NUMC4, length of the record (text to export).
    To create the file I have the following code:
      open dataset lv_filename
        for output in text mode
        encoding default
        with windows linefeed.
      loop at pt_output into ls_output.
        try.
            clear lv_length.
            lv_length = ls_output-length.
            transfer ls_output-output to lv_filename
              length lv_length.
          catch cx_root into gv_oref.
    *    TODO
        endtry.
      endloop.
    I have two problems:
    1º When I open the file in Notepad++ the records should have 500 caracters (lv_length = 500), but it has 502;
    2º Only LF appears, not CRLF.
    Can anyone help me please?
    Regards.

    Hello,
    Strangest thing, when I test it with 255 characters it works fine (CR+LF):
            clear lv_string.
            ls_output-output+254(1) = cl_abap_char_utilities=>cr_lf.
            lv_string = ls_output-output+0(255).
            transfer lv_string to lv_filename
              length 255.
    When I try with 256 characters it doesn't work, at the end of each record I can only find LF:
            clear lv_string.
            ls_output-output+255(1) = cl_abap_char_utilities=>cr_lf.
            lv_string = ls_output-output+0(256).
            transfer lv_string to lv_filename
              length 256.
    Don't understand why...
    Regards.

  • Monitor website usage statistics in Sun Java System Application Server

    Hi, I have a website in JSP/Struts running on Sun Java System Application Server..I want to monitor the number of visitors and hits in my website..How will i do it?
    Thanks in advance for your help..

    You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.

  • Application Server Role missing

    I am using the Server Manager to add server roles and I do not see the Application Server role.  Was that removed or replaced by something else?

    Hi,
    According to my test, the application server role is removed for the technical preview.
    http://micloud.azurewebsites.net/2014/10/01/windows-server-technical-preview-newremoved-windows-server-roles-and-features/
    Application Server role is deprecated in windows server 2012r2, the Application Server role is deprecated and will eventually no longer be available as an installable server role. Instead, install individual features and roles separately.
    https://technet.microsoft.com/en-us/library/dn303411.aspx 
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Connection type "Application Server ..." missing

    I'm trying to create a connection to an "Oracle Application Server 10g". When prosessing the wizard you have an option to select "Connection Type". This list does not show "Oracle Appliaction Server".
    If I press the Help button the list shows these options:
    Standalone OC4J 11g
    Oracle Application Server 11g
    Oracle Application Server 10g
    WebLogic Server 9.x
    Tomcat 5.x
    JBoss 4.0.x
    Is Oracle Application Server removed from the preview?

    Just a quick note. JDeveloper 11g will not provide deployment to 10.1.3.x directly. This feature will be enable through Ant tasks which JDev provides.
    --Ric                                                                                                                                                                                                                                                                                                                               

  • Application Server instance shutdown for no apparent reason

    Hi Experts,
    Our production ECC 6.0 Application server instance work process ended by itself, and this is the second time it happens;
    Our Platform is;
    Windows 2003 server, ECC 6.0, SQL Server 2005,
    Kernel Release : 150
    here are the sm21, dev_disp, dev_icm, dev_rd, dev_w0 logs;
    How can i prevent this error,
    Regards
    sm21 logs;
    03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)
    03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)
    03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)
    03:02:49 RD                                  Q0  I Operating system call recv failed (error no. 10054)
    03:02:50 RD                                  S3  0 SAP gateway was closed
    03:03:00 DP                                  Q0  M Message server disconnected
    03:03:00 DP                                  Q0  5 Stop SAP System, Dispatcher Pid 28
    dev_disp;
    Tue Aug 12 21:15:12 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 164
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.0.211:1592) [nixxi.cpp    4424]
    Network error of client T28, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T28 is 192.168.0.211(192.168.0.211)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (11539HASANS 28 EnAltDepo ) [dpxxdisp.c   11577]
    RM-T28, U11539, 100       HASANS, EnAltDepo, 21:14:47, M1, W1,     , 3/1
    Wed Aug 13 03:02:48 2008
    DpSigInt: caught signal 2
    DpHalt: shutdown server >sapapp1_KEC_00                          < (normal)
    DpModState: change server state from ACTIVE to SHUTDOWN
    Stop work processes
    Wed Aug 13 03:02:49 2008
    Stop gateway
    Stop icman
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    waiting for termination of gateway ...
    Wed Aug 13 03:02:50 2008
    wait for end of icman
    waiting for termination of icman ...
    Wed Aug 13 03:02:51 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:52 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:53 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:54 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:55 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:56 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:57 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:58 2008
    waiting for termination of icman ...
    Wed Aug 13 03:02:59 2008
    DpStartStopMsg: send stop message (myname is >sapapp1_KEC_00                          <)
    DpStartStopMsg: stop msg sent
    Wed Aug 13 03:03:00 2008
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
    MBUF state OFF
    MBUF component DOWN
    cleanup EM
    ***LOG Q05=> DpHalt, DPStop ( 2804) [dpxxdisp.c   10461]
    dev_rd ;
    Thu Aug 07 10:51:11 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 13 / sock 464
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3707) [nixxi.cpp    4424]
    Wed Aug 13 03:02:34 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 43 / sock 468
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.0.201:2898) [nixxi.cpp    4424]
    Wed Aug 13 03:02:49 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 14 / sock 440
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2503) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 5 / sock 44
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4669) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 38 / sock 52
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2508) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 3 / sock 492
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2421) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 8 / sock 420
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2480) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 9 / sock 408
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2481) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 10 / sock 396
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2482) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 11 / sock 384
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2483) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 37 / sock 72
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3043) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 41 / sock 40
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2657) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 480
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3318) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 40 / sock 48
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3462) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 13 / sock 464
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4059) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 12 / sock 372
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2862) [nixxi.cpp    4424]
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 15 / sock 340
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2548) [nixxi.cpp    4424]
    Wed Aug 13 03:02:50 2008
    ***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     14656]
    dev_icm ;
    trc file: "dev_icm", trc level: 1, release: "700"
    sysno      00
    sid        KEC
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    148
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3012
    [Thr 3008] started security log to file dev_icm_sec
    [Thr 3008] ICM running on: sapapp1.koyuncu.com.tr
    [Thr 3008] MtxInit: 30001 0 2
    [Thr 3008] IcmInit: listening to admin port: 65000
    [Thr 3008] DpSysAdmExtCreate: ABAP is active
    [Thr 3008] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    [Thr 3008] Thu Jul 10 09:14:17 2008
    [Thr 3008] DpShMCreate: sizeof(wp_adm)          42016     (1616)
    [Thr 3008] DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    [Thr 3008] DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    [Thr 3008] DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    [Thr 3008] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    [Thr 3008] DpShMCreate: sizeof(comm_adm)          552080     (1088)
    [Thr 3008] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    [Thr 3008] DpShMCreate: sizeof(slock_adm)          0     (104)
    [Thr 3008] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    [Thr 3008] DpShMCreate: sizeof(file_adm)          0     (72)
    [Thr 3008] DpShMCreate: sizeof(vmc_adm)          0     (1864)
    [Thr 3008] DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    [Thr 3008] DpShMCreate: sizeof(gw_adm)     48
    [Thr 3008] DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000001FB0050, size: 6365440)
    [Thr 3008] DpShMCreate: allocated sys_adm at 0000000001FB0050
    [Thr 3008] DpShMCreate: allocated wp_adm at 0000000001FB2150
    [Thr 3008] DpShMCreate: allocated tm_adm_list at 0000000001FBC570
    [Thr 3008] DpShMCreate: allocated tm_adm at 0000000001FBC5D0
    [Thr 3008] DpShMCreate: allocated wp_ca_adm at 0000000002520470
    [Thr 3008] DpShMCreate: allocated appc_ca_adm at 0000000002526230
    [Thr 3008] DpShMCreate: allocated comm_adm at 0000000002528170
    [Thr 3008] DpShMCreate: system runs without slock table
    [Thr 3008] DpShMCreate: system runs without file table
    [Thr 3008] DpShMCreate: allocated vmc_adm_list at 00000000025AEE00
    [Thr 3008] DpShMCreate: allocated gw_adm at 00000000025AEE80
    [Thr 3008] DpShMCreate: system runs without vmc_adm
    [Thr 3008] DpShMCreate: allocated ca_info at 00000000025AEEB0
    [Thr 3384] IcmProxyWatchDog: proxy watchdog started
    [Thr 3008] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 0
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 1
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 2
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 3
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 4
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 5
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 6
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 7
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 8
    [Thr 3008] IcmCreateWorkerThreads: created worker thread 9
    [Thr 3428] IcmWatchDogThread: watchdog started
    [Thr 3432] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do not trust any intermediary
    X.509 cert data will be removed from header [http_plg.c   720]
    [Thr 3432] ISC: created 400 MB disk cache.
    [Thr 3432] ISC: created 50 MB memory cache.
    [Thr 3432] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
    [Thr 3432] HttpExtractArchive: files from archive E:\usr\sap\KEC\D00\exe/icmadmin.SAR in directory E:/usr/sap/KEC/D00/data/icmanroot are up to date
    [Thr 3432] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
    [Thr 3432] CsiInit(): Initializing the Content Scan Interface
    [Thr 3432]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
    [Thr 3432] CsiInit(): CSA_LIB = "E:\usr\sap\KEC\D00\exe\sapcsa.dll"
    [Thr 3432] Thu Jul 10 09:14:18 2008
    [Thr 3432] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
    [Thr 3432] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=1052677) for /:0
    [Thr 3432] Started service 8000 for protocol HTTP on host "sapapp1.koyuncu.com.tr"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
    [Thr 3432] Thu Jul 10 09:14:24 2008
    [Thr 3432] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 6 seconds [icxxman.c    4578]
    [Thr 3432] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxman.c    4634]
    [Thr 3008] Tue Jul 22 16:47:29 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)
    [Thr 3008] Tue Jul 22 16:49:43 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 2 broken (rc=-8,nirc=-6)
    [Thr 3008] Wed Jul 23 15:06:44 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)
    [Thr 3008] Wed Jul 23 15:23:34 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 1 broken (rc=-8,nirc=-6)
    [Thr 3008] Wed Jul 23 16:54:47 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 2 broken (rc=-8,nirc=-6)
    [Thr 3008] Thu Aug 07 09:50:19 2008
    [Thr 3008] *** WARNING => IcmMsgProcess: connection to WP 0 broken (rc=-8,nirc=-6)
    [Thr 3384] Wed Aug 13 03:02:58 2008
    [Thr 3384] IcmProxyWatchDog: Shutdown request received
    [Thr 3384] *** IcmProxyWatchDog: exit thread ***
    [Thr 3428] Wed Aug 13 03:02:59 2008
    [Thr 3428] IcmWatchDogThread: Shutdown request received
    [Thr 3428] *** IcmWatchDogThread: exit thread ***
    [Thr 3008] IcmLoop: Shutdown request received
    [Thr 3008] Deactivated service 8000 for protocol HTTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)
    [Thr 3008] Deactivated service 0 for protocol SMTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)
    [Thr 3008] Removed service 8000 for protocol HTTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)
    [Thr 3008] Removed service 0 for protocol SMTP on host: "sapapp1.koyuncu.com.tr"(on all adapters) (timeout=30)
    [Thr 3008] *** ICM shutdown completed (pid: 3012) ***
    dev_w0
    A Mon Aug 11 09:32:57 2008
    A  GENER starting inline generation: AQA0SYSTQV000006ZFI_MBL_001=== (reason: explicit generation).
    A 
    A Mon Aug 11 09:35:51 2008
    A  GENER starting remote generation: /1BCDWB/SAPLIQ000000000079 (requested by W1).
    M 
    M Mon Aug 11 11:08:35 2008
    M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T100) on server sapapp1_KEC_00     
    M 
    M Mon Aug 11 11:40:23 2008
    M  *** WARNING => ThSndDelUser: delete client/user 100/MURATU       (T81) on server sapapp2_KEC_00     
    M 
    M Mon Aug 11 11:51:37 2008
    M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T28) on server sapapp1_KEC_00     
    M 
    M Mon Aug 11 12:21:53 2008
    M  *** WARNING => ThSndDelUser: delete client/user 100/HIKMETB      (T99) on server sapapp1_KEC_00     
    A 
    A Mon Aug 11 22:28:59 2008
    A  GENER starting remote generation: SAPL0F21 (requested by W1).
    M 
    M Tue Aug 12 09:47:58 2008
    M  *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_GUI [pfxxstat.c   4133]
    M 
    M Tue Aug 12 15:34:33 2008
    M  ***LOG US1=> Login, Wrong Password (UMITK ) [sign.c       4523]
    M 
    M Wed Aug 13 03:02:48 2008
    M  in_ThErrHandle: 1
    M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   
    M  ThIErrHandle: I'm during shutdown
    M  PfStatDisconnect: disconnect statistics
    M  Entering ThSetStatError
    M  ThCallDbBreak: use db_sqlbreak
    C  SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
    M  ThIErrHandle: don't try rollback again
    M  ThShutDownServer: shutdown server
    M  PfStatIndInit: Initializing Index-Record
    M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20080807 095145 SAPDB          
    B 
    B Wed Aug 13 03:02:49 2008
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=252484, com_tx=21560)
    B  statistics db_con_rollback (roll_total=984, roll_tx=11)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 4192) [dpnttool.c   333]

    Hi, i have the equal problem :
    Fri Sep 11 11:51:48 2009
    TRACE FILE TRUNCATED ( pid =     2328 )
    sysno      00
    sid        PRD
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    201
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2328
    kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
    length of sys_adm_ext is 364 bytes
    Fri Sep 11 12:01:34 2009
    SoftCancel request for T39 U9644 M2 received from REMOTE_TERMINAL
    Fri Sep 11 12:05:20 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 24 / sock 808
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.254.87:2122) [nixxi.cpp    4424]
    Network error of client T28, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T28 is 192.168.254.87(192.168.254.87)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (9645 MAGAZZ-ORIO 28 paolo ) [dpxxdisp.c   12205]
    RM-T28, U9645, 200  MAGAZZ-ORIO, paolo, 12:05:20, M2, W5,     , 3/1
    Fri Sep 11 12:18:01 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 23 / sock 1120
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.254.98:1542) [nixxi.cpp    4424]
    Network error of client T80, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T80 is 192.168.254.98(192.168.254.98)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (9730 MAGAZZ-ORIO 80 HP-DIREZIONE) [dpxxdisp.c   12205]
    RM-T80, U9730, 200  MAGAZZ-ORIO, HP-DIREZIONE, 12:17:23, M0, W10, SP02, 2/1
    Fri Sep 11 13:21:19 2009
    DpHdlDeadWp: restart wp (pid=4152) automatically
    Fri Sep 11 14:06:55 2009
    SoftCancel request for T56 U9281 M4 received from REMOTE_TERMINAL

  • Application Server Starting and then Stopping

    For some reason my NSP server is starting with MMC, but then after about a minute it stops again. Please see the log files below. It seems to be a database problem but I don't know how to fix it...
    dev_w0
    trc file: "dev_w0", trc level: 1, release: "700"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Fri Jun 20 23:50:24 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
    B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
    B  New connection 0 created
    M sysno      00
    M sid        NSP
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    23
    M intno      20050900
    M make:      multithreaded, ASCII
    M pid        4928
    M
    M  kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4928) [dpxxdisp.c   1288]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          5280     (880)
    M  DpShMCreate: sizeof(tm_adm)          3351072     (16672)
    M  DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1076)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
    M  DpShMCreate: allocated sys_adm at 04C80040
    M  DpShMCreate: allocated wp_adm at 04C81978
    M  DpShMCreate: allocated tm_adm_list at 04C82E18
    M  DpShMCreate: allocated tm_adm at 04C82E48
    M  DpShMCreate: allocated wp_ca_adm at 04FB5068
    M  DpShMCreate: allocated appc_ca_adm at 04FB5518
    M  DpShMCreate: allocated comm_adm at 04FB59C8
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 05036878
    M  DpShMCreate: allocated gw_adm at 050368B8
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 050368E8
    M  DpShMCreate: allocated wall_adm at 050368F0
    Y  *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
    Y  *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
    Y  *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
    Y  *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Fri Jun 20 23:50:25 2008
    M  ThInit: running on host PackardBell
    M  calling db_connect ...
    C 
    C  DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.019) UPDSTAT optimized (note 870327)
    C    (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
    C    (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
    C    (0.008) Support of SDBUPDEXCL (note 847616)
    C    (0.005) Switch stream compression on/off (note 835809)
    C    (0.005) ITAB stream handling optimized (note 835809)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 002-121-083-965
    C  SQLDBC Library Version : libSQLDBC 7.6.0    BUILD 018-123-113-357
    C  SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
    C  INFO : SQLOPT= -I 0 -t 0
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
    [dbsdbsql.cpp 98]
    C  Try to connect (SQLOPT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 118]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1195] [dbsh    1195 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1391]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9995]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server PackardBell_NSP_00 on host PackardBell (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Fri Jun 20 23:50:25 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10180
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 4928) [dpnttool.c   327]

    Ok I eventually figured it out... The SAP Application Server starts the database using the XUSER authentication - For some reason my system lost all settings for this.
    In order to recreate, I had to use the command prompt and use the XUSER command.
    Firstly "XUSER LIST" lists all user keys - I had none.
    I then needed to set the default XUSER:
    XUSER -d NSP -u SAPNSP,<password>
    <password> is the password for the user specified
    Then I created the "c" key:
    XUSER -d NSP -U c -u SAPNSP,<password>
    The reason I set up the "c" XUSER is because I noticed that in "\usr\sap\NSP\DVEBMGS00\exe\" there is a batch file used to start the DB - "strdbs.cmd". Inside this file it uses "c" as the user key in order to set the state of the DB.
    After all of that it worked again...

  • SAP Gui Logon - application server shutdown

    Hi!
    I'have installed SAP Netweaver 7.0 Abap TRIAL on my Windows XP Service Pack 3.
    After lunching NSP-->Start Application Server, all is ok.
    But when i try to Logon with Sap Gui 7.10, i get this error :
    application server shutdown
    Component     DPTM
    Release                710
    Version             10
    Return Code     -17
    Counter             1
    Could you please help me?
    Thanks a lot!

    Hi!
    MaxDB seems to start correctly :
    http://www.fabiocavallo.it/sap/maxdb.jpg
    ...here comes dev_w0 :
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu May 22 19:58:50 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c       237]
    M          Error 126 = "Impossibile trovare il modulo specificato."
    B  *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
    [dbcon.c      4726]
    M sysno      00
    M sid        NSP
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    95
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        3376
    M
    M  kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3376) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Thu May 22 19:58:51 2008
    M  DpShMCreate: sizeof(wp_adm)          6328     (904)
    M  DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    M  DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1280)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06420040, size: 4205552)
    M  DpShMCreate: allocated sys_adm at 06420040
    M  DpShMCreate: allocated wp_adm at 06421A28
    M  DpShMCreate: allocated tm_adm_list at 064232E0
    M  DpShMCreate: allocated tm_adm at 06423310
    M  DpShMCreate: allocated wp_ca_adm at 067935A0
    M  DpShMCreate: allocated appc_ca_adm at 06793A50
    M  DpShMCreate: allocated comm_adm at 06793F00
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06814DB0
    M  DpShMCreate: allocated gw_adm at 06814DF0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 06814E20
    M  DpShMCreate: allocated wall_adm at 06814E28
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host PCFABIO
    M 
    M Thu May 22 19:58:52 2008
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c       237]
    M          Error 126 = "Impossibile trovare il modulo specificato."
    B  *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
    [dbcon.c      4726]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server PCFABIO_NSP_00 on host PCFABIO (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu May 22 19:58:52 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3376) [dpnttool.c   327]
    Thanks again, Sergo!
    Regards.
    Fabio

  • OC4J Application Server - InstantiationException

    Error : java.lang.InstantiationException: Error initializing ejb-modules: message-destination-mapping tag with missing 'location' attribute
    HI All,
    Hope someone can help me with the following error. I've got a ear file which deploys 100% correct, and the application can run successfully after deploying. But if I stop and start the container, then i get the following exception, the container starts up but the application does not start successfully.
    Oracle Container start-up exception:
    09/05/11 09:17:15 Start process
    Listening for transport dt_socket at address: 8688
    0.000: [GC [PSYoungGen: 43776K->4394K(51008K)] 43776K->4394K(517056K), 0.0290830 secs]
    3.295: [GC [PSYoungGen: 48170K->7220K(51008K)] 48170K->8371K(517056K), 0.0499300 secs]
    6.817: [GC [PSYoungGen: 50996K->7218K(51008K)] 52147K->13636K(517056K), 0.0504670 secs]
    09/05/11 09:17:28 WARNING: Application.setConfig Application: stf-7.0.1 is in failed state as initialization failed.
    java.lang.InstantiationException: Error initializing ejb-modules: message-destination-mapping tag with missing 'location' attribute
    09/05/11 09:17:29 Oracle Containers for J2EE 10g (10.1.3.2.0) initialized
    29.062: [GC [PSYoungGen: 50994K->7226K(51008K)] 57412K->15785K(517056K), 0.0436860 secs]
    32.675: [GC [PSYoungGen: 51002K->7228K(50880K)] 59561K->16729K(516928K), 0.0346460 secs]
    We use jdk1.5, Ejb3 and Oracle 10.1.3
    We use message driven beans, for which we create an ejb-jar.xml that looks as follow:
    Start
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-jar version="3.0" xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
         <!-- OC4J EJB-JAR.XML for UDSWSConServices -->
         <display-name>vss-ejb</display-name>
         <enterprise-beans>
              <message-driven>
                   <display-name>VSSAdvancedQueueBatchBeanMDB</display-name>
                   <ejb-name>VSSAdvancedQueueBatchBean</ejb-name>
                   <ejb-class>
                        za.globed.varsite.hebs.bsi.services.ejb.VSSAdvancedQueueBatchBean
                   </ejb-class>
                   <transaction-type>Bean</transaction-type>
                   <message-destination-type>
                        javax.jms.Queue
                   </message-destination-type>
                   <message-destination-link>
                        jms/batchQueue
                   </message-destination-link>
                   <activation-config>
                        <activation-config-property>
                             <activation-config-property-name>
                                  acknowledgeMode
                             </activation-config-property-name>
                             <activation-config-property-value>
                                  Auto-acknowledge
                             </activation-config-property-value>
                        </activation-config-property>
                        <activation-config-property>
                             <activation-config-property-name>
                                  destinationType
                             </activation-config-property-name>
                             <activation-config-property-value>
                                  javax.jms.Queue
                             </activation-config-property-value>
                        </activation-config-property>
                        <activation-config-property>
                             <activation-config-property-name>
                                  subscriptionDurability
                             </activation-config-property-name>
                             <activation-config-property-value>
                                  NonDurable
                             </activation-config-property-value>
                        </activation-config-property>
                        <activation-config-property>
                             <activation-config-property-name>
                                  messageSelector
                             </activation-config-property-name>
                             <activation-config-property-value>
                                  Destination =
                                  'za.globed.varsite.hebs.bsi.services.VSSAdvancedQueueBatchBean'
                             </activation-config-property-value>
                        </activation-config-property>
                   </activation-config>
              </message-driven>
         </enterprise-beans>
         <assembly-descriptor>
              <container-transaction>
                   <method>
                        <ejb-name>VSSAdvancedQueueBatchBean</ejb-name>
                        <method-name>*</method-name>
                   </method>
                   <trans-attribute>Supports</trans-attribute>
              </container-transaction>
              <message-destination>
                   <display-name>
                        Destination for VSSAdvancedQueueBatchBean
                   </display-name>
                   <message-destination-name>
                        jms/batchQueue
                   </message-destination-name>
              </message-destination>
         </assembly-descriptor>
    </ejb-jar>
    -- end --
    Any help or suggestions would be much appreciated.
    Thanks
    Nina

    I would advise you to use the latest version - 10.1.3.5 - i remember some issues with 10.1.3.4.
    For certifications see here:
    http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-101310-097492.html
    You have two options to bypass the check:
    * Use ignore : runinstaller -ignoresysprereqs
    http://onlineappsdba.com/index.php/2008/11/24/upgrade-oracle-application-server-to-10134-10g-r3-patchset-4/
    * Or change in the installers file that lists the allowed versions - you can search for the numbers listed in your error dialog

  • Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

    Hi All,
    I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
    I have set the authentication scheme to Oracle Application server Single Sign On.
    When i run the application i am getting the below error.
    Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
    Please help me to resolve this.
    Thanks and Regards,
    Suhas

    Suhas,
    After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
    Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
    Ricker

  • Data access from Application Server - Seeking Opinion

    I am working on a fairly large scale ERP application that is written in Java both on the front end, and middle tier ( using a JBoss application server ).
    All of the database access happens in my app server, and when I wanted to get peoples opinions on the best way to extract and pass data to and from the database from the app server, and of course to and from the client.
    I am using JDBC to make database calls and extra data from the database. This is of course pretty trivial. And I first started writing POJO that represent tables in my database. I then wrote a faily length method that uses reflection to call the setting methods and pass in the objects returned from the database result set. This of course becomes tricky when you start to join multiple tables together. And often you only need a small subset of columns in a table and don't require an object with all the columns from the table ( some set, and some as null objects ).
    So then I decided I was use a combination of ArrayList objects and HashMap's to store the data. If a result set returned multiple rows, it would return an ArrayList of HashMap objects. Each hash map would contain the data for that row, and the hash map keys are the column names.
    This seems to work pretty well and resolves the problem of joining multiple tables together and keeping track of which columns get stored in which objects.
    Does anyone have a different solution or idea as to how to handle this? And thoughts or ideas would be greatly appreciated.

    bryano wrote:
    Let me pose a quick Hibernate question as well.Let me recommend that you not be so thin-skinned about responses.
    >
    If you had a table that had 40 columns in it and say 1000 rows. And you needed to run a query that returned all 1000 rows, but you only needed two out of the
    40 columns. Would it be better to extract those two columns into the HashMap / ArrayList collection I mentioned in my original post? Or would using something like Hibernate and a class that mapped all of the columns in the table be okay?Why not just map the columns you needed in Hibernate? Who said you had to map all 40 and have them be null?
    My concern is on efficiency,
    and I was wondering if building 1000 objects that each have 40 members that only 2 are populated is the most efficient way of extracting the data.Doesn't sound very efficient.
    I will admit, my knowledge of Hibernate is limited at best so I may be missing a component of Hibernate that would allow you to only extract the columns you required, but you are still working with an object that has 38 null value objects for the columns you didn't require.I don't believe you're required to map every column in a table.
    %

Maybe you are looking for

  • MBP 15 2.66Ghz removable battery... long time to charge (4 to 5 hours)?

    My MBP (early 2009) model with removable battery, just bought refurbished from Apple takes between 4 to 5 hours to fully charge from low battery while suspended (sleep). Battery shows as healthy condition Normal Capacity shows as 4519 mAh. Cycles sho

  • Report Painter Execution Problem

    Hi, I am working on Report Painter in which i am facing a problem that when i execute the Tcode GR55 and fill the Group Name in it ,if there is only 1 report in it ,it gets executed but when there are more than 1 report in it ,some times it gets exec

  • How to catch click event on BAR or a BAR GRAPH???

    Hello I want to implemnt following things, 1. there is Bar Graph containing 10 Bars. 2. So i want to navigate to 10 diff. pages on click of each bar. So how to catch click event on BAR or a BAR GRAPH.????

  • Connect an iMac to the internet through the iPhone

    Is it possible to connect to the internet on my iMac through my iPhone? Message was edited by: Seattle_Scott tethering not supported...yet. please disregard Message was edited by: Seattle_Scott

  • TimeZoneSupport messed up all my appointment times - how do I fix it?

    All of my appointments have had their time changed and I am urgently seeking help to return them to their correct times. I have 3 devices: Apple MacBook Pro (mid 2009) running the latest version of Snow Leopard iPad 2 running iOS 4.3.5 iPhone 3GS run