ST22 doubt

Hi
I have to do Analysis of Dumps in ST22 for user ID and suggest them how we can i Avoid.
i want to know for what value he entered on selection screen the dump occured .
how will i get that .
Thanks,
Gayatri

Hi,
There is no direct way which will tell you what the user entered which resulted in a dump.
You will have to analyse the issue and find out what exactly caused the error.
When you analyse the error; in section Chosen Variables' can sometimes help you in determining what was teh data which was present in the variables at the time when the dump occured.
Although it is a pure analysis.
Regards,
Ankur Parab

Similar Messages

Dunning - ST22- Exception in GET_DUNNING_CUSTOMIZING FM.

Hi Experts,
Issue is,
When the user ran the Dunning report on July 16th, (selection criteria is--> July 16th & From customer 1 TO customer 999999999), bcoz of some thing, at CUST_444, the Exception was raised (say, for customers CUST_111, CUST_222, CUST_333, its successful), saying that...ABAP/4 processor: RAISE_EXCEPTION and it stopped there/job cancelled!
So, now, again when the user wants to(subsequent running of dunning report) run the report for customer 1 to 999999999, SAP is blocking CUST_111, CUST_222, CUST_333 reports and saying already printed on July 16th!
ST22- Exception in GET_DUNNING_CUSTOMIZING FM.
So, How to fix it? I guess, we hv to delete the July 16th history report, If so, How to delete it?
thanq.
Message was edited by:
Srikhar

Hi Sheshu,
If u get chance, pls. culd u respond to my other thread, title is,
SM 30 -
AUTHORITY-CHECK OBJECT 'XXX' ??
search criteria: authority-check object
area: abap general-abap development
time: 7 days.
Pls. clarify my doubts, sent to Roman!
I copied and paste the same code to my requiremetn, after declaring necessory data part, but not working!
if u did not find the thread , pls. let me know!
thanq.

Short dump in ST22

My application is running correctly and we never getting any dump in browser but in ST22 there are thousands of dumps recorded for application.
The details are as below. My all services are activated. Kindly suggest what could be the cause
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_GENERAL
Date and Time          07/07/2011 10:39:42
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CX_WD_GENERAL=================CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    WebDynpro Exception: ICF service node
    "/sap/bc/webdynpro/sap/App/undefined" does not exist (see SAP Note
    1109215).
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_WD_GENERAL"
    "CX_WD_GENERAL=================CP" or "CX_WD_GENERAL=================CM003"
    "RAISE"

Hi Shefali,
In ST22 what does in show in the "Source Code Extract" session. Usually it points to code which raosed the exception.
You can try putting a breakpoint there and see what happens at runtime.
Please revert back in case of doubts.
Regards,
Sumit

Dumps ST22

Good days
My doubt is the following one is if a note exists of sap or a document where one explains the dumps that take place in the transaction ST22 in the ECC 6.0.
Thanks

Hi Marcos,
Note which you can find in service market place which relates to you queries and issues & ST22(ABAP Runtime error) transaction is where you can check the ABAP Related Dumps.
Regards,
Krishna

Doubt on Alerts

Hi ,
        I had a doubt regarding 'ALERTS':
1.How do we test alerts ? Is it through report 'RSALERTTEST' , if so any mandatory parameters should be given while testing alerts ?
2. what are these "alert dumps" how to trace them in transaction ST22, any example for clear understanding purpose?
3. In case of alerts what is use of transaction "SLG1"?
plz answer to above questions & ur help will be more valuable .
                                                                                Regards,
                                                                                Smitha.

>         I had a doubt regarding 'ALERTS':
> o we test alerts ? Is it through report 'RSALERTTEST'
> , if so any mandatory parameters should be given
> while testing alerts ?
You give the name of the Alert Category here.
> 2. what are these "alert dumps" how to trace them in
> transaction ST22, any example for clear understanding
> purpose?
Basically, if an Alert is not triggered in the runtime due to some error where youe expected an Alert to be triggered, you should be able to see the trace statements on why the Alert was not triggered here in St22.
> 3. In case of alerts what is use of transaction
> "SLG1"?
SLG1 is the transaction that is used to monitor all Trace Staement of your alerts. It will also contain info like when an Alert was triggered, the recipeient of the alert etc.
In ALRTCATDEF you would need to select option Write Log for this.
ST22 contains only error dumps, SLG1 is similar to MoNI . To understand what alert was triggered etc.
Regards
Bhavesh

Doubt in fbl1n transaction

hi i have a doubt....
in fbl1n transaction, there are open items and cleared items.
in it the cleared items for certain document types such as invoice etc is not present in the open item table (bsik)
however the cleared items for document types such as general voucher its present in the open items table (bsik)
is this possible as all cleared item entries shld b present in the open item table with an indicator set for cleared or not...
plz exlain!

Hi
There are 2 tables(open and Closed Items) in FI for Account Payables and Account Receivables and GL accounts
1.Account payables: BSIK is Open Items and BSAK is Closed items
2.Account Receivables; BSID and BSAD for OPEN and closed items
3/GL accounts : BSIS and BSAS for Open and Closed Items
Reward points for useful Answers
Regards
Anji

Doubt in creation of a new object

Hi All,
I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype
of any existing object, then what should we enter in the Program field for creating the object?
I hope I am clear with my question.
Thanks in Advance,
Saket.

Hi Saket,
Following will be required for created a custom business object.
1. Object Type - ZTEST (Internal Techincal Key)
2. Object Name - ZTESTNAME (Technical Key Name)
3. Name - TEST (Name of BO, it is used while selecting the object type)
4. Description - (Short Description of BO)
5. Program - ZTESTPROGRAM (ABAP program in which the methods of the object type are implemented)
6. Application - A or B.. etc (Area to which your BO is related)
Please remember that you can learn these basic things by giving F1 help on those fields and in HELP.SAP.COM.
Regards,
Gautham Paspala

ST22 short dump with error DFIF_REPO_SQL_ERROR

HI, All
SAP ERP 2004s on windows 2003x64 with SQLserver database.
Here is ST22 and dev_w0
20.03.2014 Dynamic List Display 1
Runtime Error
|Date |Time |Host |User |Client|Keep|Name of runtime error|Exception|Appl. component|Report|No. Sess|
|20.03.2014|08:48:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
|20.03.2014|08:18:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
D:\usr\sap\PRD\DVEBMGS00\work\dev_w0
trc file: "dev_w0", trc level: 1, release: "640"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, M
B
B Mon Mar 17 13:26:13 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.405)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 414
M intno 20020600
M make: multithreaded, Unicode, 64 bit
M pid 4544
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4544) [dpxxdisp.c 1227]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 58560 (1464)
M DpShMCreate: sizeof(tm_adm) 38387184 (19184)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1248000 (624)
M DpShMCreate: sizeof(vmc_adm) 0 (512)
M DpShMCreate: sizeof(wall_adm) (400056/346328/64/192)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B9B0050, size: 40479544)
M DpShMCreate: allocated sys_adm at 000000000B9B0050
M DpShMCreate: allocated wp_adm at 000000000B9B1C30
M DpShMCreate: allocated tm_adm_list at 000000000B9C00F0
M DpShMCreate: allocated tm_adm at 000000000B9C0118
M DpShMCreate: allocated wp_ca_adm at 000000000DE5BF08
M DpShMCreate: allocated appc_ca_adm at 000000000DE61CC8
M DpShMCreate: allocated comm_adm_list at 000000000DE63C08
M DpShMCreate: allocated comm_adm at 000000000DE63C20
M DpShMCreate: allocated vmc_adm_list at 000000000DF94720
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000DF94748
M DpShMCreate: allocated wall_adm at 000000000DF947B8
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M tskhstart: taskhandler started
M tskh_init: initializing DIA work process W0
M tskh_init: rdisp/cleanup_after_crash = 1
M
M Mon Mar 17 13:26:15 2014
M calling db_connect ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:16 2014
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:22 2014
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png
I
I Mon Mar 17 13:26:26 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000016320050, size: 41613000)
M SHM_ROLL_AREA (addr: 000007FFC4050050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018AD0050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020AE0050, size: 2678942)
M SHM_PAGING_ADM (addr: 0000000020D70050, size: 787488)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000020E40050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateNoBuffer: correct_btc_behaviour = 1
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0000000020ED0050
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0000000020F700D8, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0000000020F70320, size: 6240232)
B dbntab: Buffer FTAB(item array) (addr: 0000000021563B08, size: 24960000)
B dbntab: Buffer FTAB(data area) (addr: 0000000022D31708, size: 128000000)
B dbntab: Buffer IREC(hash header) (addr: 000000002A7500D8, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 000000002A750320, size: 6240232)
B dbntab: Buffer IREC(item array) (addr: 000000002AD43B08, size: 6240000)
B dbntab: Buffer IREC(data area) (addr: 000000002B337208, size: 13312000)
B dbntab: Buffer STAB(hash header) (addr: 000000002BFF00D8, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000002BFF0320, size: 6240232)
B dbntab: Buffer STAB(item array) (addr: 000000002C5E3B08, size: 6240000)
B dbntab: Buffer STAB(data area) (addr: 000000002CBD7208, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 00000000350400D8, size: 4744)
B dbntab: Buffer TTAB(anchor array) (addr: 0000000035041360, size: 6240232)
B dbntab: Buffer TTAB(item array) (addr: 0000000035634B48, size: 15600000)
B dbntab: Buffer TTAB(data area) (addr: 00000000365154C8, size: 113880000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 40, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000002CEEEA58)
B dbtbxbuf: Buffer TABL (addr: 000000003D1C0150, size: 263640000, end: 000000004CD2D510)
B dbtbxbuf: Buffer TABLP (addr: 000000002E780150, size: 61440000, end: 0000000032218150)
B dbexpbuf: Buffer EIBUF (addr: 000000004CD30158, size: 122880000, end: 0000000054260158)
B dbexpbuf: Buffer ESM (addr: 0000000032230158, size: 4194304, end: 0000000032630158)
B dbexpbuf: Buffer CUA (addr: 0000000054270158, size: 30720000, end: 0000000055FBC158)
B dbexpbuf: Buffer OTR (addr: 0000000032640158, size: 4194304, end: 0000000032A40158)
B dbcalbuf: Buffer CALE (addr: 0000000032A50050, size: 500000, end: 0000000032ACA170)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M rdisp/hold_keeps_time_slice -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000010E29190
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 3 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000331C00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000331C0C58
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 50852kb, dir_size: 25348kb.
A Attached to PXA (address 000007FFD4080050, size 720000K, 2 fragments of 334576K )
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FF26F71000 leng=20955136 end=000007FF2836D000)
A >> Shm MMADM area (addr=000007FF2741D070 leng=246976 end=000007FF27459530)
A >> Shm MMDAT area (addr=000007FF2745A000 leng=15806464 end=000007FF2836D000)
A RFC Destination> destination clusterx64_PRD_00 host clusterx64 system PRD systnr 0 (clusterx64_PRD_00)
A RFC Options> H=clusterx64,S=00,d=2
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 83148 bytes at 0000000033330050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 360000
Y ztta/diag_ara 250000
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\PRD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0,
B join_conforms_iso = 1
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.414.20020600]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [29]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume clusterx64_PRD_00
E Profile-Parameter: enque/sync_dequeall = 0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Mar 17 13:26:31 2014
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
B
B Mon Mar 17 13:26:34 2014
B table logging switched off for all clients
N
N Mon Mar 17 13:26:44 2014
N login/password_change_for_SSO : 1 -> 1
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0000000005990050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 00000000059907B8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 00000000059907F0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 00000000059907FC
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
D
D Mon Mar 17 13:26:51 2014
D GuiStatus: table test
D GuiStatus set generate inline >20140317132651<
D GuiStatus clear generate inline >20140317132651<
B
B Mon Mar 17 13:27:00 2014
B dbmyclu : info : my major identification is 3232240218, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is C8157D392BFA064AAC992593949203BE.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
G
G Mon Mar 17 13:27:03 2014
G GetWritePermissionForShm( pLocation = 283, pEnforce = 0 )
G
G Mon Mar 17 13:27:04 2014
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M ThEMsgArrived: sysmsg_for_rfc = 0
G
G Mon Mar 17 13:27:18 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
A
A Mon Mar 17 13:31:19 2014
A ***ATRA: session closed by other process
D
D Mon Mar 17 13:35:06 2014
D GuiStatus generation SAPLSUU5 is not running
Y go to separate LUW generation ===> 20140317133506
Y GuiStatus generate texts: SAPLSUU5 M
Y return from separate LUW <=== WP: 1 th_rc=0 OK
G
G Mon Mar 17 13:35:16 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M
M Mon Mar 17 13:40:02 2014
M ThIUsrDel: th_rollback_usrdelentry = 1
A
A Mon Mar 17 13:44:07 2014
A ***ATRA: session closed by other process
B
B Mon Mar 17 13:46:35 2014
B create_con (con_name=++DBO++0020)
B New connection 1 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000001 ACTIVE NO NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
S
S Mon Mar 17 13:51:33 2014
S found spool memory service RSPO-ACTIONS at 00000000331C9090
D
D Mon Mar 17 14:05:56 2014
D GuiStatus generation RSSTAT26 is not running
Y go to separate LUW generation ===> 20140317140556
Y GuiStatus generate: RSSTAT26 SELECT
Y
Y Mon Mar 17 14:05:57 2014
Y return from separate LUW <=== WP: 2 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140557
Y GuiStatus generate texts: RSSTAT26 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
D
D Mon Mar 17 14:06:11 2014
D GuiStatus generation RSSTAT50 is not running
Y go to separate LUW generation ===> 20140317140611
Y GuiStatus generate: RSSTAT50 0010
Y
Y Mon Mar 17 14:06:12 2014
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140612
Y GuiStatus generate texts: RSSTAT50 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y
Y Mon Mar 17 14:07:10 2014
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate: SAPMSRD0 MAIN_NEW
D GuiStatus generate status prog >SAPMSRD0< status >MAIN_NEW< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate texts: SAPMSRD0 E
D GuiStatus generate texts prog >SAPMSRD0< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y Mon Mar 17 14:23:12 2014
Y
Y ===> running separate LUW generation: 20140317142312
Y ===> requesting WP: 1
Y GuiStatus generate: RSMSSDBPAHI 0100
D GuiStatus generate status prog >RSMSSDBPAHI< status >0100< >20140317142312<
D GuiStatus set generate inline >20140317142312<
D GuiStatus clear generate inline >20140317142312<
B
B Mon Mar 17 14:31:34 2014
B create_con (con_name=++DBO++0020)
B New connection 2 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000016 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000017 ACTIVE NO NO NO NO NO 004 255 255 20140317 143134 SAPPRDX64
B
B Mon Mar 17 14:51:33 2014
B Disconnected from connection con_da={++DBO++0020,17,2}
B
B Mon Mar 17 15:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000030 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000031 ACTIVE NO NO NO NO NO 004 255 255 20140317 153136 SAPPRDX64
B
B Mon Mar 17 15:51:33 2014
B Disconnected from connection con_da={++DBO++0020,31,2}
B
B Mon Mar 17 16:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Mon Mar 17 16:31:37 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000044 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000045 ACTIVE NO NO NO NO NO 004 255 255 20140317 163136 SAPPRDX64
B
B Mon Mar 17 16:51:33 2014
B Disconnected from connection con_da={++DBO++0020,45,2}
B
B Mon Mar 17 17:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000058 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000059 ACTIVE NO NO NO NO NO 004 255 255 20140317 173136 SAPPRDX64
B
B Mon Mar 17 17:51:33 2014
B Disconnected from connection con_da={++DBO++0020,59,2}
B
B Mon Mar 17 18:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000072 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000073 ACTIVE NO NO NO NO NO 004 255 255 20140317 183136 SAPPRDX64
B
B Mon Mar 17 18:51:33 2014
B Disconnected from connection con_da={++DBO++0020,73,2}
B
B Mon Mar 17 19:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000086 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000087 ACTIVE NO NO NO NO NO 004 255 255 20140317 193136 SAPPRDX64
B
B Mon Mar 17 19:51:33 2014
B Disconnected from connection con_da={++DBO++0020,87,2}
B
B Mon Mar 17 20:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000100 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000101 ACTIVE NO NO NO NO NO 004 255 255 20140317 203136 SAPPRDX64
B
B Mon Mar 17 20:51:33 2014
B Disconnected from connection con_da={++DBO++0020,101,2}
B
B Mon Mar 17 21:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000116 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000117 ACTIVE NO NO NO NO NO 004 255 255 20140317 213136 SAPPRDX64
B
B Mon Mar 17 21:51:33 2014
B Disconnected from connection con_da={++DBO++0020,117,2}
B
B Mon Mar 17 22:31:37 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000130 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000131 ACTIVE NO NO NO NO NO 004 255 255 20140317 223137 SAPPRDX64
B
B Mon Mar 17 22:51:33 2014
B Disconnected from connection con_da={++DBO++0020,131,2}
B
B Mon Mar 17 23:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000144 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000145 ACTIVE NO NO NO NO NO 004 255 255 20140317 233136 SAPPRDX64
B
B Mon Mar 17 23:51:33 2014
B Disconnected from connection con_da={++DBO++0020,145,2}
M
M Tue Mar 18 00:01:33 2014
M SecAudit(check_daily_file): audit file closed D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140318000001.AUD
B
B Tue Mar 18 00:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000158 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000159 ACTIVE NO NO NO NO NO 004 255 255 20140318 003136 SAPPRDX64
B
B Tue Mar 18 00:51:33 2014
B Disconnected from connection con_da={++DBO++0020,159,2}
B
B Tue Mar 18 01:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000172 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000173 ACTIVE NO NO NO NO NO 004 255 255 20140318 013136 SAPPRDX64
B
B Tue Mar 18 01:51:33 2014
B Disconnected from connection con_da={++DBO++0020,173,2}
B
B Tue Mar 18 02:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000186 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000187 ACTIVE NO NO NO NO NO 004 255 255 20140318 023136 SAPPRDX64
B
B Tue Mar 18 02:51:33 2014
B Disconnected from connection con_da={++DBO++0020,187,2}
B
B Tue Mar 18 03:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000200 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000201 ACTIVE NO NO NO NO NO 004 255 255 20140318 033136 SAPPRDX64
B
B Tue Mar 18 03:51:33 2014
B Disconnected from connection con_da={++DBO++0020,201,2}
B
B Tue Mar 18 04:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000214 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000215 ACTIVE NO NO NO NO NO 004 255 255 20140318 043136 SAPPRDX64
B
B Tue Mar 18 04:51:33 2014
B Disconnected from connection con_da={++DBO++0020,215,2}
B
B Tue Mar 18 05:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000230 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000231 ACTIVE NO NO NO NO NO 004 255 255 20140318 053136 SAPPRDX64
B
B Tue Mar 18 05:51:33 2014
B Disconnected from connection con_da={++DBO++0020,231,2}
B
B Tue Mar 18 06:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000244 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000245 ACTIVE NO NO NO NO NO 004 255 255 20140318 063136 SAPPRDX64
B
B Tue Mar 18 06:51:33 2014
B Disconnected from connection con_da={++DBO++0020,245,2}
B
B Tue Mar 18 07:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000258 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000259 ACTIVE NO NO NO NO NO 004 255 255 20140318 073136 SAPPRDX64
B
B Tue Mar 18 07:51:33 2014
B Disconnected from connection con_da={++DBO++0020,259,2}
B
B Tue Mar 18 08:31:41 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000272 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 ACTIVE NO NO NO NO NO 004 255 255 20140318 083141 SAPPRDX64
B
B Tue Mar 18 08:51:33 2014
B Disconnected from connection con_da={++DBO++0020,273,2}
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1128862
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table RSEUMOD [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B *** ERROR => missing return code handler
abdebug#?[17989] does not handle return code 1 from dbcrtab#6[1596]
==> calling sap_dext to abort transaction
[dbeh.c 84]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(0) failed with dbcode 10054
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(1) failed with dbcode 10054
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B Reconnect state is entered by connection:
B 000: name = R/3, con_id = 000000000, state = ACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B RECONNECT: rsdb/reco_trials: 3
B RECONNECT: rsdb/reco_sleep_time: 5
B RECONNECT: rsdb/reco_sync_all_server: OFF
B db_con_reconnect: reconnecting to connection 0:
B 000: name = R/3, con_id = 000000000, state = INACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B disconnecting from connection 0 ...
B disconnected from connection 0
B opening connection 0 ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000279 INACTIVE NO NO NO NO NO 003 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 DISCONNECTED NO NO NO NO NO 000 255 255 20140318 085133 SAPPRDX64
B successfully reconnected to connection 0
B ***LOG BYY=> work process left reconnect status [dblink#6 @ 732] [dblink 0732 ]
B
B Tue Mar 18 09:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Tue Mar 18 09:31:36 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000286 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000287 ACTIVE NO NO NO NO NO 004 255 255 20140318 093135 SAPPRDX64
B
B Tue Mar 18 09:51:33 2014
B Disconnected from connection con_da={++DBO++0020,287,2}
B
B Tue Mar 18 10:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000300 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000301 ACTIVE NO NO NO NO NO 004 255 255 20140318 103135 SAPPRDX64
B
B Tue Mar 18 10:51:33 2014
B Disconnected from connection con_da={++DBO++0020,301,2}
B
B Tue Mar 18 11:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO

Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don

Doubt in sender mail adapter

Hi Everyone,
Can we read and validate the attachment of the mail.If so how to do it.
Thanks in advance,
Sakthi

Hi Sakthi,
Please refere the below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/52b240ac052817e10000000a1550b0/frameset.htm
Let me know if you have any doubts regarding this.
Thanks,
sekhar.

PI' RFC Connection pool doubt.

Hi PI exports:
i have a doubt about pi' RFC Connection pool ,pi RFC receive channel can set the conn pool size ,but when start the rfc receiver channel ,is there always only one Connection pool ,or there is only one Connection pool instance?
thinks
Edited by: kevin liang on Oct 19, 2009 6:45 AM

Hi,
Connection poolins size means how many number of connection you want to make open to send data to ECC, We can define maximum number of connection in Receiver RFC Adapter,Go to additional parameters section and define Max Number of connection give the number there,thats it.Internally it works as Connection poolin mechanism.
Regards,
Raj

Small Doubt Regarding SY-MANDT

Hi All,
     SELECT changenr FROM cdhdr CLIENT SPECIFIED INTO CORRESPONDING FIELDS OF TABLE it_cdhdr
                                         WHERE mandant = syst-mandt
                                         AND   objectclas = 'MATERIAL'
                                         AND   objectid   = wa_matl-matnr
                                         AND   tcode      = 'MM02'.
     I have written the select stament as shown above.
     In this i have a doubt like adding a field sy-mandt in the where condition will increase the Efficiency of program or not.
regards,
raghu.

Hi..
No doubt the efficency would be affected but from business point of view there will many things that need to be checked as in:
If you are viewing data from CDHDR and CDPOS which is client specific then you are not viewing complete data.
These tables give us and document changes made to a particular object in SAP but if anything is cross client like company code(lets assume) then changes to it wont be visible in all the clients..
so there can be some key information you can miss out while working on some of the objects.
else in this case its good to make query cross client.
regards
vishal

Doubts with control break statements on internal table loops (AT/ENDAT)

Hi, i've had a couple of doubts for a long while which I hope someone can clarify today:
1) I know how to use the AT statements, however, i'm not sure I get correctly what this part of help regarding this commands means:
"The control level structure with internal tables is static. It corresponds exactly to the sequence of columns in the internal table (from left to right). In this context, the criteria according to which you sort the internal table are unimportant."
I've always sorted the internal table before the control break and it works that way. For example:
SORT ITAB BY EBELN EBELP.
LOOP AT ITAB.
AT NEW EBELN.
* Code for the order header
ENDAT.
ENDLOOP.
If I don't sort the internal table, it doesn't work! (i get dupplicated processing). In the example, if i have more than one register with the same EBELN and they're not consecutive, the header gets processed twice. I really don't get that part of the help text.
2) I know this: "At the start of a new control level (i.e. immediately after AT), the following occurs in the output area of the current LOOP statement:
All character type fields (on the right) are filled with "*" after the current control level key.
All other fields (on the right) are set to their initial values after the current control level key."
My doubt is: WHY is that this way? Because sometimes (most times) I need those fields INSIDE the statement! So when that happened i've solved it in one of three ways:
LOOP AT ITAB INTO WA_ITAB.
WA_ITAB_AUX = WA_ITAB.
AT NEW FIELD.
 WA_ITAB = WA_ITAB_AUX.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
LOOP AT ITAB INTO WA_ITAB.
AT NEW FIELD.
 READ TABLE ITAB INDEX SY-TABIX INTO WA_ITAB.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
* (Without AT)
LOOP AT ITAB INTO WA_ITAB.
IF WA_ITAB-FIELD <> FIELD_AUX.
 FIELD_AUX = WA_ITAB_FIELD.
* ...Rest of the code for the first register
ENDIF.
ENDLOOP.
Is there any problem with this way of coding? Can be done better?
Thank you very much in advance.

Hi..,
1)
See if u sort the table on a field on which u r using AT ENDAT .. then all the records which are having the same value for that field will form a group or those reocrds will be at one place.. so when u sort the table for all the records AT ENDAT will get executed onli once..
If u dont sort this table on this field then all these records will be at different places and in between there may be records with different value for this field.. so this AT ENDAT will get executed for each record !!
2)
No u cannot use the Right hand fields of the field in the table .. Because these AT events work as Group based operations... So till that field on which AT ENDAT is working it breaks that record into two groups.. One is the left hand fields including that field.. and right hand fields as another group.. and makes the right hand group as stars ****. Thats y u can observe that even any one field in the left hand group changes the AT ENDAT will get executed !!!!
Hope u understood !!!
regards,
sai ramesh

LOOP DOUBT INSIDE PACKAGE

CREATE PACKAGE EMP_PKG AS
CURSOR EMP_CUR IS
SELECT EMPNO,DEPTNO,SAL,HIREDATE
FROM EMP
WHERE DEPTNO=30;
PROCEDURE P_EMP;
PROCEDURE P_GET_SAL(V_EMPNO NUMBER);
PROCEDURE P_GET_LOC(V_EMPNO NUMBER);
Now inside my Package Body
INSIDE THE MAINPROCEDURE P_EMP
I WILL BE CALLING THE BELOW TWO PROCEDURES
PROCEDURE P_EMP
BEGIN
FOR I IN EMP_CUR LOOP
P_GET_SAL(I.EMPNO);-- DO I NEED TO LOOP AGAIN IN P_GET_SAL PROC?
P_GET_LOC(I.DEPTNO);
END LOOP;
END;
NOW WHAT IAM DOING IS
in my P_GET_SAL Procedure is
PROCEDURE P_GET_SAL(V_EMPNO NUMBER)
V_SAL EMP.SAL%TYPE;
BEGIN
FOR I IN EMP_CUR LOOP
SELECT SAL INTO V_SAL FROM EMP
WHERE EMPNO=I.EMPNO --DOUBT HERE
END;
I WANT TO KNOW WHETHER I NEED TO LOOP AGAIN
HERE OR INSTEAD OF THAT
PROCEDURE P_GET_SAL(V_EMPNO NUMBER)
V_SAL EMP.SAL%TYPE;
BEGIN
SELECT SAL INTO V_SAL FROM EMP
WHERE EMPNO =V_EMPNO;
END;
SINCE iam calling V_EMPNO WITH CURSOR FROM MY
MAINPROCEDURE ..
WILL THE PROCEDURE USES THE CURSOR VALUES
AND LOOP ITSELF FOR EVERY EMPLOYEE TO
GET THE SALALRY ?
PLEASE LET ME KNOW SINCE MY PACKAGE IS MORE THAN 3000
LINES I cant proceed unless its confirmed i can
do so ..

Hi all,
Thanks for Looking into my Problem
I Got answer by MySelf ..i dont need to loop again my sub procedures
if i try to do that iam getting the error
ERROR at line 1:
ORA-06511: PL/SQL: cursor already open
Thank you all once again ..

Doubt on Rows and Coloums in BEx Query Designer.

Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharp

yes i am Doing Offest.
I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks.   in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
         Colums--> Forcast ( User Entered year )          Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks

Doubt regarding facebook integration for windows phone 8.1 silverlight app?

Hi,
I am developing a windows phone 8.1 silverlight application . For my application I integrated the facebook login. For this facebook integration I used the login with facebook app method.
My doubt is after getting the app id from the dev center , I updated the appid at developers.facebook.com , wmmanifest.xml (In extensions protocol (msft-appid without dashes)) . Or do I need to change the product id in the place holder also , I tried to
change the productid also but I am getting error like some signature is wrong try with different signature. I am confused how to do it .
Any help,
Thanks...
Suresh.M

Hi Suresh,
According to your description, I assume you want to complete facebook configuration in windows phone silverlight app. Please refer to the following link to see how.
http://facebooksdk.net/docs/phone/config/.
You can find code sample from
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/tree/master/Samples.
Facebook API is third-party library and it is our of our support range. You can post questions on here.
https://github.com/facebook-csharp-sdk/facebook-winclient-sdk/issues.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

ST22 doubt

Similar Messages

Maybe you are looking for