Standard integration 2.0 from SFSF Recruiting to SAP HR

Hi,
we are going to utilize the standard integration 2.0 from SFSF Recruiting to SAP HR. However, I haven't found any information how to automize the transaction which actually transfers the data from SFSF Recruiting to SAP HR (I assume it will replace the transaction HRSFI_RCT_HIRE). Can it be scheduled as a background job or what would be the best approach to set automatism?
Have anyone already implemented the add-on 2.0 from SFSF Recruiting to SAP HR?
Thanks in advance,
Susanna

Hello
SFSF job applications can be imported to SAP by scheduling report RH_SFI_IMPORT_RECRUITING_DATA.
Once job applications are imported from SFSF to SAP, data appears in the staging area (transaction HRSFI_RCT_HIRE). As delivered, hiring process via this transaction is a manual process and cannot be automated.
Sridhar

Similar Messages

How to interface Candidates from Peopleclick Recruitment to SAP HCM

Hi all,
We have the requirement to upload candidates personal data from Peopleclick Recruitment Management System to table T752F in order to run afterwards the transaction PA48, that actually needs also to be extended in order to verify if it is new hire or re-hire, but it is another topic.
I would like to know if there is any standard iDOC/RFC that can be used to do this technical upload?
Thanks in advance.
Best regards,
/Luis T.

Hi Luis!
To load applicant, you can use the BAPI HR_MAINTAIN_MASTERDATA or HR_INFOTYPE_OPERATION, in this case always using TCLAS = B.
All others parameters have filled.
If you wand, send-me a e-mail in the follow ad: mlanzoni at br.ibm.com.
Regards!
Edited by: Marcello Lanzoni on Jul 23, 2008 3:02 PM

Integrating third party recruitment with SAP

Hi folks,
I had a question regarding intergrating the third party system with SAP HR masterdata. I am basically looking at transferring the applicant data from the Recruiting (third party tool ) system into SAP HR Masterdata. I found using the feature PAPLI something like integration could be done. I do not know how ???
Right now, at the click of button something like Data transfer (entering the applicant id) can be manually imported into SAP Masterdata from the SAP recruiting module on the same system.
Can such a process be achieived using a third party tool? Is direct transfer process from the thrid party tool into SAP Employee Masterdata possible? Is the feature PAPLI (found from IMG) something like this can be accomplished?
The version we are using is SAP 4.6C
Any thoughts or leads in this area will be highly appreciated.
Thanks in advance,
SK

I am not sure of any standard integration programs specific to recruitment, but through customization we can integrate third party rectt systems like People click, HRP etc.
Develop inbound programs with ALE-IDOC system to transfer the data to Rectt tables.
The switch will control activation of integration between the systems.
If this helps, pl do reward.
Thanks
Narasimha

Data transfer from E-recruitment to PA

Dear All,
we are Implementing E-recruitment. while transferinf the data from E-recruitment to Personnel administraion, I am getting the error, No data available from the partner system table T752F). We are using the same server for E-rec and PA.
While doing the data transfer activity in E-recruitment i m getting succfulll. In R/3 while going to the Tcode PA48 i m getting the error.
Please help me on this.
Thanks and Regards,
Revathi.

An integrated hiring (data transfer) scenario with SAP e-recruitment
and R/3 starts with creating a "Data Transfer for New Employees"
activity within e-recruiting for the candidate selected to be hired.
Data from e-recruitment is transferred to the target HR (via an RFC
call) and stored there in a holding table (T572F) for processing
by an appropriate action. Within the HR system, execute transaction
PA48 to access the holding table. Select the candidate you want to
process and then click the "Hire" button, and continue with the
appropriate action.
This message occurs, if you execute PA42 or PA48, in order to perform
the personnel action RA (Integration with Recruitment in Partner
Systems) and no data exists on the R/3 or external system.
You will find all the relevant information in the IMG documents
available. Please check;
- Set Up Data transfer from SAP ECC
- Set Up Data Transfer for New Employees

Transport data into IT 22 and 105 from E-Recruiting

Hello,
During the hiring candidate due to PA48 we need to transport the communication and education data from E-Recruiting to HCM. It means that during the hiring action info-types 0022 and 0105 must be filled by data from E-Recruiting automatically and be displayed for personnel administrator. We have the standalone scenario of integration E-Recruiting - HCM (two instancies) and help.sap.com does not contain any information about any enhancement (BAdI or something else) for this case.
Does anyone know how it can be realized?
Thanks.

Hi ,
Yes it possible to transfer 105 and infotype 0006 . I am not sure about IT22.
Please check the OSS note 1006679,989410
"An external candidate was set. Their hiring date is in the future. As
soon as this date has been reached, you can use the HRALXSYNC report to
assign the external candidate to the personnel number. The system does
not transfer the address of the external candidate, but the system
creates a new address in accordance with infotype 0006 (new business
partner BP). However, in E-Recruiting, you can only access this address
if infotype 5110 is maintained in such a way that it is in line with the
address data of the relevant business partner. With the corrections
(call of the SYNCH_ADDRESS_AND_COMM method, also during 'Move'), the
synchronization also occurs when you transfer the external candidate to
the internal candidate."
Regards,
Ram

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

How to Transport standard text in scpits from 1 client to other

HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
Veerendra

Hi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m.

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Pro

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?

This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened)

Where is Posting Information From E recruiting Stored in SAP

Hi All,
I need to know where in R-3 the Posting information from E recruitment is stored.I have checked the following infotypes
Posting Information (Infotype 5121)
Posting Instance (Infotype 5122)
but they do not store the posting info.
I need to know the datbase for E recruitment.
Any help is greatly appreciated
Thanks and best regards
Rajeev

Hi,
Have you checked infotypes 5102,5103...?5141?
Check for tables starting with hrp5*.
Regards,
Manoj.

How to create the integration with webmethods from portals

Hi Experts,
I got a requirement to integrate the webmethods system from my portal server.....
If anybody have documents kindly circulate the same to [email protected]
Higher points will be rewarded for the each useful inputs....
Thanks In Advance,
Jasmine

HI jasmine,
For integrating webmethods you can use application integrator iViews.
For Step-By-Step Guide to implement Application Integrator
refre this weblog.
Re: Integration with Java applications
And for Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
refre this weblog
Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
And for refrence use this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/70/5a3842134bad04e10000000a1550b0/frameset.htm
PS: If helpful award points
--Deepak.

How Enabling ERP Integrator Drill Through from a Grid

Hi All,
Can any one tell me how to see the source data by using FR.
some where i saw we can see this by using Enabling ERP Integrator Drill Through from a Grid.
but i dont know how to set this...
can any one help on this...

Incidentally we had been trying to use Essbase studio as an option.But there are 2 oints that we are trying to investigate.
1) Can we bypass deployment of data and metadata everytime through Essbase studio after the initial outline is delpoyed? In the system architecture the relational tables are populated using ODI. We would like to load the data and metadata through ODI into the cube. Eeven then can we implement drill thru bypassing deployment through Essbase Studio?
2) If Essbase studio is imperative for drill through then what are the batch automation options for deployment through Essbase studio? Ideally the option should be after the relational tables are populated through ODI then the Essbase deployment should be invoked and batch script should load the data and metadata through Essbase Studio.
Please advise.
Thanks,
Anirban

SRM7.0-No standard Integration Scenarios & Integration Processes & Msg Map

Hi,
In Integration Repository of PI, for s/w component SRM 7.0, there is no standard 'Integration Scenarios & Integration Processes' & standard 'Message Mapping' in any of the namespaces. But in SRM 5.0, it 'Integration Scenarios & Integration Processes' are there like...
Plan_Driven_Procurement_SupplierEnablement &
Service_Procurement_SupplierEnablement
Pls help.
Thanks in advance,
rgds,
balu

Hi
Please check the proxy services under the name space "http://sap.com/xi/SRM/SE/Global" . SAP note 1263876 may help you in finding the right service for your scenario.
Thanks
Kiran

How to Import Standard (client specific) infosets from one Quality to Prod

Hello Experts,
Is there a way to Import Standard (client specific) infosets from Quality to Prod system without creating a transport request? (No TR is created on Quality system when changing the standard infoset)
Kindly show me the steps..
Points will be given out.
Thanks
Olekan Babatonde

Answer found by poster.

Installing CS4 Design Standard as an upgrade from InDesign

Installing CS4 Design Standard as an upgrade from InDesign CS on Mavericks OS but serial numbers not valid. Is there a keystroke to override this hangup?

Thanks kglad, I have attempted all of your suggestions with no success. This is a specific unique issue requiring a special set of keyboard commands to unlock or override my s/n. The product is an upgrade from an old InDesign CS. The InDesign CS is not on the harddrive, I cannot install the InDesign CS again after Mavericks upgrade. The CS4 install routine does not present an opportunity to enter the InDesign CS s/n when I attempt a trial install and launch. The initial install required a call to Adobe support and special keystrokes were provided from support to "open" the software. Please help. Adobe support via CHAT are not able to access this information.

[svn] 3529: Integrated TCAL SWCs from Build 183.

Revision: 3529
Author: [email protected]
Date: 2008-10-08 17:56:15 -0700 (Wed, 08 Oct 2008)
Log Message:
Integrated TCAL SWCs from Build 183.
These fix a problem introduced with the last TCAL SWCs, in which the Enter key in a TextArea was ignored. TCAL's Configuration class got a new manageEnterKey Boolean, but it now defaults to true instead of false.
Reviewer: N/A
Bugs: -
QA: No
Doc: No
Modified Paths:
flex/sdk/trunk/frameworks/libs/tcal_conversion.swc
flex/sdk/trunk/frameworks/libs/tcal_core.swc
flex/sdk/trunk/frameworks/libs/tcal_edit.swc

Dale,
What would you think my problem is. I have tried everything including calling Tech Support - nobody has an answer... Help! ?   My Mac Pro is now a shiny paperweight.
Process:         Pages [2821]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [199]
Date/Time:       2011-11-21 16:59:05.924 -0600
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          30531 sec
Crashes Since Last Report:           4
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      83C9E4A8-B8E9-45C6-B863-42D11D11401A
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/*/SFArchiving.framework/Versions/A/SFArchiving
History: Logic Board went bad. Took it in for warranty work, technician crashed it and had to restore my documents; for some reason they installed Lion for me - bottom line is, my Mac is running Lion and will not let Pages or Numbers start. Everything else seems fine. Would really like to do some school work.
Thanks!

Standard integration 2.0 from SFSF Recruiting to SAP HR

Similar Messages

Maybe you are looking for