Purchase Card fields in VA01
Hi everyone
In our QAS system within transaction VA01 we have some fields appearing relating to Payment Cards but in our PRD system they do not appear. The difference between the two systems is causing us a few problems. Does anybody know how to display hide these fields? I haven't found anything that looks useful in SPRO nor within SAPMV45A - yet!
We are on version 4.6C.
Thanks
Andy
Hi
I believe they are SAP standard fields - ccdata-ccins, ccdata-ccnum and ccdate-exdatbi.
The program versions appear to be the same in QAS and PRD.
thanks
Andy
Similar Messages
-
No value in Purchasing Document field in FBL1N Transaction
Hi All,
While executing a report RFITEMAP (Transaction FBL1N), Purchasing Document field is blank while I can see the corresponding Purchasing Document in BSEG table. I have a requirement to show the same in the output. Do we have some settings or ABAP code changes to achieve it?
Any kind of input would be helpful to me.
Rgds,
KhanshiHi,
Please read note 152335
You can achieve it via OSS note 112312, but you need to program the BTE as per your business requirements, as stated in the note there is no standard functionality for this.
You may refer to the following wiki page, it has an example, but in the example, another field was used, maybe it can be useful for you.
http://wiki.sdn.sap.com/wiki/x/fg3cCw
regards
Waman -
Search Help for ROUTE field in VA01
Hi All,
I need help in assigning search help to ROUTE(VBAP-ROUTE) field in VA01 Transaction.Instead of standard F4 list I need a list of Routes from the Custom table which will be maintaned.This new F4 list has to be displayed based on order types...Means only for order type ZXXX it should show the new F4 List, for the rest of the ordertypes it should show the standard F4 List.
P.S : Search help H_TVRO is assigned to the Route.This Search help doesn't have Search help Exit or Append Search help options.
Your help is highly appreciated.
Thanks.
Satyan.Hi,
You can do that using search help exits you would find several threads already posted to the forum for this like below:
Link[Search Help Exits|Search Help Exit;
Regards,
Himanshu -
Purchase order Field LIke Material , Non editable by using Trax code Me22n
Guru
How to make Purchase order Field LIke Material , Non editable by using Trax code Me22n
ThanksHi
Check this in SPRO- SAP IMG- Material Management - Purchasing- Purchase order- Define screen lay out at document level
In this select the particular field selection key and change the material field to display.
Hope it will do
Regards,
Raman -
Dear All,
I awant to add purchase order field in T-Code F-40. Following is Scenario.
Transaction to be processed : Outgoing Payment
PstKy : 29 (Special G/L Debit)
Account : (vendor Account)
SGL IND : J
uner more data also it is not showing. I have also used T-Code OB41 but still it is not showing PO field in first screen.
DineshHi,
Following are the steps i have gone through.
1. T-Code OBXT to search G/L Account, then i gone through the combination AcctypeSGL Ind (KJ). Then Chart of Accounts. Then i Listed all G/L which are in used.
2. T-Code FS00, Field Status Group.
3. T-code : OBC4, Then Field Status Group(which is in use of G/L Account) and marked purchase order field as required field under (material management/purchase order)
Still it is not showing purchase order field in first screen of F-40.
Dinesh -
Purchase order field in Cash Journal
Hi,
We want to post expenses with reference to Purchase order in Cash Journal. Purchase order field is not available in the Cash Journal. How to update the purchase order field in Cash Journal.
Regards,
AzeemHi,
In Cash journal, there are fields which are standard from the program SAPMFCJ0 and Control FTCJ_E_POSTINGS.
So you can see in FBCJ, while you post transaction line at the extreme right, you can see "configuration" there you can see the available fields. If you want to include, contact ABAP consultant or SAP team.
Regards,
Ramesh. -
Purchase requisition and Purchase order fields in the APO system
Hi
I have to develop a report in the APO system for which material id needs to be linked with purchase order and purchase requisition fields. I am not able to locate the table to pick these fields.Please anyone can tell which table,FM or BAPI to use.
thanks in advanceYou should be able to retrieve the PegID for this particular material/plant combination using /SAPAPO/DM_PEGID_GET_MATERIAL and then using OM LC Get data you should be able to retrieve all the order categories you need for the report.
-
Disabling selected Purchase Order field(s) after released/approved
Hi Experts,
I have a requirement to disable specific Purchase Order fields after released via ME29N.
For example, in Purchase Requisition - I can "Release Indicator - Field Selection Key" to control Purchase Requisition screen layout. However, for Purchase Order - the configuration for "Release Indicator" consist only standard default "Chgable" options.
Question:
Is there a way to customize the Purchase Order "Release Indicator" for screen layout based on customer requirements other that using the default as mentioned above?
Thank you.
StevenHi Padmasri,
I understand your explanation on the standard SAP behavior.
Nevertheless, I'm looking for some flexibility to meet customer requirement. Like in Purchase Requisition, there is option to further customize the screen layout by linking it to the "Release Indicator".
Therefore, apart from the standard 6 options given by standard SAP, can we add/customize the options? For example, my customer may one to change a field in the Purchase Order even after released.
Thank you.
Steven -
Purchase order field missed in inspection lot 17
Hi,
We create a purchase order and then inbound delivery in ECC6. inbound delivery is then distributed in SCM/EWM and good receipt is performed in EWM, an inspection document is created in EWM and an external number (17) is created in ECC6.
The issue is that the purchase number field is no more visible in the inspection document 17 when we display the inspection lot 17
(we are using this field in a workflow and now this action is failing).
Is there a way to bring that missing field
Any help on this will be appreciated
Thanks a lotThanks Jürgen L. for your reply.
I have made some test cases on development server but they are showing correct reference. To me also it looked program bug, -
Payment Card field not required when terms Credit Card is selected
Hi all,
I am trying to make Payment Card fields required when the user selects Credit Card as Payment terms. Right now it allows to save the Sales Order even if there is no credit card number entered, even though the Payment Terms has been selected as Credit Card. I found a note 606494 but it has to do with a component we don't even have installed, so I could not implement it. Did not have any luck searching the forums. Please help!
Thanks,
SergiyCheck the settings -
Set Up Payment Guarantees
Define Forms of Payment Guarantee
Transaction: OVFD
Tables: T691K
Action: R/3 is delivered with form 02 defined for payment cards. Other than the descriptor, the only other entry should be 3 in the column labeled PymtGuaCat
Define Payment Guarantee Procedure
Transaction:
Tables: T691M/T691O
Action: Define a procedure and a description.
Forms of Payment Guarantee and make the following entries Sequential Number 1
Payment Guarantee Form 02
Routine Number 0 Routine Number can be used to validate payment card presence.
Define Customer Payment Guarantee Flag
Transaction:
Tables: T691P
Action: Define a flag to be stored in table.
Create Customer Payment Guarantee = Payment Card Payment Cards (All Customers can use Payment Cards).
Define Sales Document Payment Guarantee Flag
Transaction:
Tables: T691R
Action: Define the flag that will be associated with sales document types that are relevant for payment cards
Assign Sales Document Payment Guarantee Flag
Transaction:
Tables: TVAK
Action: Assign the document flag type the sales documents types that are relevant for payment cards.
Determine Payment Guarantee Procedure
Transaction: OVFJ
Tables: T691U
Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
Payment Card Configuration
Define Card Types
Transaction:
Tables: TVCIN
Action: Create the different card types plus the routine that validates the card for length and prefix (etc )
Visa , Mastercard, American Express, and Discover
Create the following entries for each payment card
AMEX American Express ZCCARD_CHECK_AMEX Month
DC Discover Card ZCCARD_CHECK_DC Month
MC Mastercard ZCCARD_CHECK_MC Month
VISA Visa ZCCARD_CHECK_VISA Month
Regards
Sai -
IDOC Posting with new fields in VA01
Hi,
Previously i asked for creating New fields in VA01 screen.
i got that now i need to create a sales order based on the Inbound IDOC which i get and i will be getting new fields which are created .
And this Fields data is coming from an Extension to the Standard IDOC. Sales order is getting created but the new fields are not getting populated nor stored in VBAK Table.
pls let me know why is this.And provide me with a soultion.
MG.Hi,
i had a similar problem in my last assignment .
I think you are using IDOC_INPUT_ORDERS F/M for Posting the IDOC.
Here once you go into the code at line number 116 you can see that they are calling Transaction VA01 for posting the sales order .
If you go into any perform there you would be having the User Exits . Use the exits and you need to process the IDOC in the Foreground so that you can catch the Screen flow and the screen number , as you do in SHDB.
Now you need to make sure that you are getting the new screens there where you have desigined the fields on the screen.
And write the BDC Code with proper OK Codes before the Save ok code SICH is reached .
And make sure that you are writing the code at the header level only as you need to update the VBAK Table.
As this is a single screen you can directly write the BDC code for populating the fields data and at last make sure that the ok-code you are giving is the right one.
Pls let me know if this problem is solved , i need to check the code in which exit i have written . But here it would be the same EXIt i think .
the exit name is EXIT_SAPLVEDA_002 .
Pls check this and let me know.
Regards,
Naidu. -
Hi,
We have added a Z field to VA01 transaction header lever Additional Data B.
When we try and create a order using VA01 it is working fine but when we try to record the transaction using SHDB we are unable to find the Z field in additional data B.
that Z field is missing (so we cannot enter data and record the field).
Please help.
Thanks
LRK.You can just get the name of the zfield and include it in you recording for the screen where it is
EX:
perform bdc_field using 'ZFIELD' 'XXXX'.
This will resolve the issue.
regards,
Gurpreet -
VKM1 Status and Purchase Order Fields
Hi Everyone,
I'm new with SD and not familiar with transaction VKM1. I have a task that needs to get the corresponding Status field and Purchase Order field for a corresponding VBELN. To what table can I map these data?
Please help.
Many Thanks!Hi
Kindly use the belwo tables and fields
VBAK--BSTKD --POurchase order
VBUP-GBSTAOverall processing status of the SD document item
Regards
Damu -
Please email me the credit memo of $143.88 for receipt/order number AD014458308 that was credited to my purchasing card.
Linda Rawlins [email protected]Don't post order information or other personal information here. We're all just fellow users here - you are not communicating with Apple when you post here - and so posting such information just risks your privacy. I've asked the Hosts to remove all the private information from your post.
The serial number was included in the box ARD came in; the Apple Store will not have a record of it. If you've lost the serial number, you'll need to purchase a new copy of ARD, probably a good idea anyway since 2.2 won't run on any version of Mac OS X since, if memory serves, 10.4. It's a lot cheaper through the Mac App Store than it was back when you first purchased.
Regards. -
Purchase Requisition field in TCode:- MD09
Dear Experts,
I have a requirement, currently in MD09 we can enter the only one 'Purchase Requisition' number to get Pegged Requirement Details. My requirement is to make the 'Purchase Requisition' field available for multiple input entries... is there any user exits with which i can do this modification the SAP Standard MD09 Tcode....????
Plz suggest...
Thanks in advance...It may be easier to create an enhancement or implementation. Did you try looking at a BADI like ME_PROCESS_REQ_CUST? Inside here you can create an implementation .
Or, to find a BADI to put your code into, put a breakpoint inside this method. After executing your transaction you will see every BADI that this transaction will hit inside of this method:
CALL METHOD cl_exithandler=>get_class_name_by_interface
EXPORTING
instance = instance
IMPORTING
class_name = class_name
CHANGING
exit_name = exit_name
EXCEPTIONS
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
OTHERS = 6.
CASE sy-subrc.
Maybe you are looking for
-
Urgent! Adobe killed drag/dropping workflow in CC. Help restore it!
I posted this first FR at the end of another thread, here. Due to the importance of this issue, IMO, I'm giving this FR a new thread, plus adding as second version of the same FR. My stance is simple. Every change Adobe makes to Premiere Pro should
-
Problem with Chart of depreciation-Urgent
Hi while assigning chart of depreciation to company code, The following message is coming Inconsistency between FI company code XXX and chart of deprec. XXXX Message no. AC481 Diagnosis You tried to assign chart of depreciation XXXX to company code X
-
Oracle 10g - Chinese Charecter issue
Hi All I have the following scenario and I need your valuable inputs solve my problem I am using Oracle 10g version and I have a database created and it contains around 9 tables and 25k records, as per my current requirement I need to add few more co
-
Hi., i am using jdev 11.1.5 i need to insert a non database field in jspx page i had created a table finperiod i need to insert a four nondatabse fields named as rec,dist,supl,cust. How can i acheive this?
-
Creating Gender option buttons in the Screen ZP000200
Hi all, I am creating Gender option button (male, female) P0002-GENDR in the customized module pool ZP000200. Also the Gender field is maintained in the CI include or table P0002. CHAIN. FIELD p0002-categ. FIELD p0002-pstay. FIELD p000