Standard output when calling a method from a jar
I have a question about obtaining standard output from a call to a method in a jar. I understand that a) and b) below are equivalent, but how do I get the output that the java call produces when I call SugarMain.decode in a java program? In other words, where does the output from SugarMain.decode go and is that equivalent to the standard output from the java SugarMain -decode call? I obtained the jar from http://bach.istc.kobe-u.ac.jp/sugar/ which has no user support.
Thank you,
Richard Becraft
a) SugarMain.decode("sugar5400.out", "sugar5400.map");
b) java SugarMain -decode sugar5400.out sugar5400.map
java SugarMain -decode sugar5400.out sugar5400.map
s SATISFIABLE
a creditHours 10
a id11672 true
a id11673 false
a id11674 false
a id11675 false
a id11676 false
a id12385 false
a id13043 false
a id13044 false
a id14032 false
a id13046 true
a id11852 true
a id11921 false
a id12832 false
a id12833 false
a id13355 false
a id14311 false
a
Without knowing anything about SugarMain it is difficult to answer your question.
It may help to know that there is nothing inherently different about classes referenced from jar files then classes referenced from loose class files. The specifies on how to get the output of SugarMain.decode() is dependent on SugarMain.decode().
You say that there is no user support but is there any documentation or source files or samples. If the answer is "No" to all of those, it may be that you lose.
Similar Messages
-
Permission Denied when calling a method from VB using WebLogic 8.1.2 JCOM
Hi,
We are calling an java/ejb methods from VB using WebLogic JCOM 8.1 SP2. But
using JCOM, we are getting a error Permission denied when called from VB. We think
that we should update pathch jintegra 2.0 or 2.1 in WebLogic 8.1.2 the to solve
this issue, because we faced the same problen "permission denied" when we used
JINTEGRA(third party software). Once we installed the JINTEGRA 2.1 it solved the
issue.
So, can anyone help on regard to this issue of "Permission denied" in WebLogic
JCOM 8.1 SP2.
Thanks & Regards
RaghuI too am experiencing the jCOM error: "Run-time error '70': Permission Denied". The problem appears to be related to a Microsoft Security Patch KB835732 (MS04-011 which, as you indicated, has been fixed in J-Integra v2.1 (FYI, jCOM 8.1 is based on J-Integra 1.5.4, see J-Integra/jCOM versions.
Did you ever get a resolution concerning 8.1 SP2? 8.1 SP3 is available now but I don't see any mention of jCOM updates in the WebLogic 8.1 What's New documention. I can't immediately upgrade (trying to stay on same version as a few other developers I work with) but I am hoping it is resolved in SP3. -
Can't add list element when calling a method from another class
I am trying to call a method in another class, which contains code listmodel.addElement("text"); to add an element into a list component made in that class.
I've put in System.out.println("passed"); in the method just to make sure if the method was being called properly and it displays normally.
I can change variables in the other class by calling the method with no problem. The only thing I can't do is get listmodel.addElement("text"); to add a new element in the list component by doing it this way.
I've called that method within it's class and it added the element with no problem. Does Java have limitations about what kind of code it can run from other classes? And if that's the case I'd really like to know just why.There were no errors, just the element doesnt get added to the list by doing it this way
class showpanel extends JPanel implements ActionListener, MouseMotionListener {
framepanel fp = new framepanel();
--omitted--
public void actionPerformed(ActionEvent e){
if(e.getSource() == button1){
fp.addLayer();
/*is in a different class file*/
class framepanel extends JPanel implements ActionListener{
--omitted--
public void addLayer(){
listmodel.addElement("Layer"+numLayer);
numLayer++;
} -
I am new to DAQmx and .NET.
In my application I need to activate a clock out on counter 2 (HW pci 16 E 4).
I went through all the steps like the sampling examples but instead of Analog input
I used counter output , and setup the pulse ratios.
When I click the switch in the user interface ( a user control databinded to the clock output)
the output works. Since I need to activate it programmatically I tried to call the daQmxUserControl11.Start()
method but this causes the following error :
An unhandled exception of type 'NationalInstruments.DAQmx.DaqException' occurred in nationalinstruments.daqmx.dll
Additional information: Specified operation cannot be performed while the task is running.
Task Name: DAQmxTask1
Status Code: -200479
Any ideas on what am I doing wrong?
Thanks DavidThanks a lot,
I also discovered that dragging the user control onto my user interface doesn't allow alternate activation.
( I actually tried stopping and then starting but the result was the same )
Calling the routines as indicated in the header comments also gave some hiccups ( I had to remark some code to get the system working progrtammatically.
public void Start()
#region Update UI
this.switch1.Caption = "On";
this.switch1.Value = true;
#endregion
daqmxTask.Start();
public void Stop()
#region Update UI
this.switch1.Caption = "Off";
this.switch1.Value = false;
#endregion
daqmxTask.Stop();
#region Methods -
FUNCTION NOT IMPLEMENTED error when calling C# method from SAP, why?
Hi,
I've build a server stub in order to get SAP calling my own methods that exist in the C# world, for that I developed several methods in a class that extends SAPServer and then implemented them...
I added the special custom properties needed (Abap Name, length, etc) to the function and to its parameters, I've made the ABAP code required to call it...
I've checked, every parameters that I place in ABAP (importing, exporting and tables) are also defined in C# (its 53 parameters) with the same name (in C# they are in capital letters and in a diferent order but I tried this before and it didn't matter)...
The name of the function is the same...
How can I get the 'FUNCTION NOT IMPLEMENT' error in SAP?
What's going wrong when I get this error?
Can anyone tell me?
Is there any place in this site that has a error description and possible reasons?
When I get a parameter wrong I get a different error (I tried to make smaller functions and they work fine).
Thanks for the help,
Nuno Felino
Message was edited by: Nuno FelinoHi,
I'll explain what I'm doing:
- we have a set of services made in a C and VB that are available using an API in C#, these services must be available to SAP. So I have a program that will see what parameters the API service requires and makes a proxy so that SAP can call these services.
To do this I must map SAP types with C#, build the function signature and then implement it. So I cannot use the wizard to do this
Now, back to the question, what kind of customer attributes I got wrong to get that exception? The most logic is the AbapName of the function but they are equal (the one called in SAP and the one in the customer attributes of the function)...
Thanks for the answer, can you give me any more hint? -
NoSuchMethodError when call JPublisher method
Im getting a java.lang.NoSuchMethod error when calling a method within
a Java class generated by JPublisher.Hi Larry,
thanks for the answer:
DB Version is:
select * from v$version:
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.0.1.4.0 - 64bit Production
PL/SQL Release 9.0.1.4.0 - Production
CORE 9.0.1.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 9.0.1.4.0 - Production
NLSRTL Version 9.0.1.4.0 - Production
Is there a possibility to get out if intermedia is installed? I really think it is because the methods work. I can process the image - the problem is that somehow a error occurs but the the method worked. The image written to the filesystem has the correct values.
describe ordsys.ordimage leads to the expected output:
SQL> describe ordsys.ordimage;
Element Type
SOURCE ORDSYS.ORDSOURCE
HEIGHT INTEGER
WIDTH INTEGER
CONTENTLENGTH INTEGER
FILEFORMAT VARCHAR2(4000)
CONTENTFORMAT VARCHAR2(4000)
COMPRESSIONFORMAT VARCHAR2(4000)
MIMETYPE VARCHAR2(4000)
INIT FUNCTION
COPY PROCEDURE
PROCESS PROCEDURE
PROCESSCOPY PROCEDURE
SETPROPERTIES PROCEDURE
CHECKPROPERTIES FUNCTION
GETHEIGHT FUNCTION
GETWIDTH FUNCTION
GETFILEFORMAT FUNCTION
GETCONTENTFORMAT FUNCTION
GETCOMPRESSIONFORMAT FUNCTION
SETLOCAL PROCEDURE
CLEARLOCAL PROCEDURE
ISLOCAL FUNCTION
GETUPDATETIME FUNCTION
SETUPDATETIME PROCEDURE
GETMIMETYPE FUNCTION
SETMIMETYPE PROCEDURE
GETCONTENTLENGTH FUNCTION
GETCONTENT FUNCTION
GETBFILE FUNCTION
DELETECONTENT PROCEDURE
SETSOURCE PROCEDURE
GETSOURCE FUNCTION
GETSOURCETYPE FUNCTION
GETSOURCELOCATION FUNCTION
GETSOURCENAME FUNCTION
IMPORT PROCEDURE
IMPORTFROM PROCEDURE
EXPORT PROCEDURE
PROCESSSOURCECOMMAND FUNCTION
OPENSOURCE FUNCTION
CLOSESOURCE FUNCTION
TRIMSOURCE FUNCTION
READFROMSOURCE PROCEDURE
WRITETOSOURCE PROCEDURE
MIGRATEFROMORDIMGB PROCEDURE
MIGRATEFROMORDIMGF PROCEDURE
GETPROPERTIES PROCEDURE
I do not want to use a database link. everything is stored in that one database. I really have no clue why plsql thinks I want to.
Regards,
Markus -
Calling a method from another file
This is pretty basic stuff but i can't seem to get it right. I am calling a method from another file. The other file IS located in the same folder BUT when i compile i get errors
"cannot find symbol" <===referring to limit and sieve i believe.
The method name is "sieve" the file name is "PrimeSieve2008" and "limit" is the variable in brackets in the real method.
public static void main (String [] args) {
final int [] PRIMES;
int sieve = PrimeSieve2008.sieve(limit);
PRIMES = sieve(getValidInt());
for (int j = 0; j<PRIMES.length; j++) {
System.out.println("Prime[" + j + "] = " + PRIMES[j]);
Is "int sieve = PrimeSieve2008.sieve(limit)" the wrong way to call a file?
Thanks a million,
Alex
Edited by: Simplistic2099 on Apr 3, 2008 7:47 PM
Edited by: Simplistic2099 on Apr 3, 2008 7:49 PMSimplistic2099 wrote:
the other method runs fine:
"public static int[] sieve(final int limit){
int candidate; // possible prime
int count; // no. of primes found
boolean[] mayBePrime = new boolean[limit+1];
// remaining possibilities
final int[] PRIMES; // array to return
// initialize mayBePrime
for ( int j = 0 ; j <= limit ; j++ ) {
mayBePrime[j] = true;
mayBePrime[0] = mayBePrime[1] = false;
// apply sieve, and count primes
candidate = 2;
count = 0;
while ( candidate <= limit ) {
if ( mayBePrime[candidate] ) {
count++;
for ( int j = 2 * candidate ; j <= limit ; j += candidate ) {
mayBePrime[j] = false;
} // end for
} // end if
candidate++;
} // end while
// fill up new array with the primes found
PRIMES = new int[count];
count = 0;
for (int j = 2 ; j <= limit ; j++ ) {
if ( mayBePrime[j] ) {
PRIMES[count] = j;
count++;
} // end if
} // for
return PRIMES;
} // sieve
I really am clueless here.in this one you are passing in limit.
in the other one you are getting limit from somewhere outside of main. -
Help on Calling a method from another class
how can i call a method from another class.
Class A has 3 methods
i just want to call only one of these 3 methods into my another class.
How can I do that.When i am trying this
A a=new A;
Its calling all the methods from class A. I just want
to call a specfic method.How can it be done?When i am trying this
A a=new A();
Its calling all the methods from class A. I just want to call a specfic method.How can it be done? -
Calling a method from another class or accessing a component from another
Hi all
im trying to make a find/replace dialog box
my main application form has a jtextpane and when i open up the find and replace dialog box it has two textboxes (find and replace)
now i have the code to do the finding on my jtextpane but how do i call that code to do the find method?
I have tried having the code in my main application class but then how do i call that method from my dialog box class?
ive also tried having the code in my dialog box class, but then how to i tell it to work on my jtextpane which is in my main ap class?well if someone had been nice enough to provide me
with a tutorial i wouldnt have gotten into this
muddle, no need to be rude is there!I'm not rude. And you also wouldn't have gotten into the muddle if you searched yourself. This site provides many very good tutorials about all kinds of stuff.
http://java.sun.com/docs/books/tutorial/java/javaOO/classes.htmlAmong other things, it mentions that "static" defines everything that belongs to a class, as opposed to an object. -
Call C# method from javascript in WebView and retrieve the return value
The issue I am facing is the following :
I want to call a C# method from the javascript in my WebView and get the result of this call in my javascript.
In an WPF Desktop application, it would not be an issue because a WebBrowser
(the equivalent of a webView) has a property ObjectForScripting to which we can assign a C# object containg the methods we want to call from the javascript.
In an Windows Store Application, it is slightly different because the WebView
only contains an event ScriptNotify to which we can subscribe like in the example below :
void MainPage_Loaded(object sender, RoutedEventArgs e)
this.webView.ScriptNotify += webView_ScriptNotify;
When the event ScriptNotify is raised by calling window.external.notify(parameter), the method webView_ScriptNotify is called with the parameter sent by the javascript :
function CallCSharp() {
var returnValue;
window.external.notify(parameter);
return returnValue;
private async void webView_ScriptNotify(object sender, NotifyEventArgs e)
var parameter = e.Value;
var result = DoSomerthing(parameter);
The issue is that the javascript only raise the event and doesn't wait for a return value or even for the end of the execution of webView_ScriptNotify().
A solution to this issue would be call a javascript function from the webView_ScriptNotify() to store the return value in a variable in the javascript and retrieve it after.
private async void webView_ScriptNotify(object sender, NotifyEventArgs e)
var parameter = e.Value;
var result = ReturnResult();
await this.webView.InvokeScriptAsync("CSharpCallResult", new string[] { result });
var result;
function CallCSharp() {
window.external.notify(parameter);
return result;
function CSharpCallResult(parameter){
result = parameter;
However this does not work correctly because the call to the CSharpResult function from the C# happens after the javascript has finished to execute the CallCSharp function. Indeed the
window.external.notify does not wait for the C# to finish to execute.
Do you have any solution to solve this issue ? It is quite strange that in a Window Store App it is not possible to get the return value of a call to a C# method from the javascript whereas it is not an issue in a WPF application.I am not very familiar with the completion pattern and I could not find many things about it on Google, what is the principle? Unfortunately your solution of splitting my JS function does not work in my case. In my example my CallCSharp
function is called by another function which provides the parameter and needs the return value to directly use it. This function which called
CallCSharp will always execute before an InvokeScriptAsync call a second function. Furthermore, the content of my WebView is used in a cross platforms context so actually my
CallCSharp function more look like the code below.
function CallCSharp() {
if (isAndroid()) {
//mechanism to call C# method from js in Android
//return the result of call to C# method
} else if (isWindowsStoreApp()) {
window.external.notify(parameter);
// should return the result of call to C# method
} else {
In android, the mechanism in the webView allows to return the value of the call to a C# method, in a WPF application also. But I can't figure why for a Windows Store App we don't have this possibility. -
How to Call C++ Method from Java
I need to call C++ method from Java.
I have gone through the JNI tuorial , but was not able to pin point things.
I read that :
You have to write JNI c functions which then call your C++ member functions.You need to write a JNI function which will call new on your C++ class.
Now i have java class :
Java Code JavaClass.java ---->
class JavaClass{
public native void nativeMethod();
static
System.loadLibrary("NativeCppCode");
private void callCppMethod()
//call C++ method
JavaClass jvc = new JavaClass();
jvc.nativeMethod()
}Cpp Code:
NativeCppCode.h---->
class NativeCppCode
public:
getValue();
setValue();
private:
int a;
JNIEXPORT void JNICALL Java_JavaClass_nativeMethod(JNIEnv *env
,jobject obj);NativeCppCode.C---->
NativeCppCode::getValue()
return a;
NativeCppCode::setValue()
a = 1;
JNIEXPORT void JNICALL Java_JavaClass_nativeMethod(JNIEnv *env
,jobject obj)
NativeCppCode* nativeInstabce = new NativeCppCode();
NativeCppCode.setValue();
}Is this the correct way to do it.
Any suggestion would be a great help to metryit wrote:
I need to call C++ method from Java.Not possible.
JNI uses C methods.
Is this the correct way to do it.Same way you would do it in any C/C++ method (not java)
MyClass* p = ....
p->doit();
Common idiom for the pointer in the above is to pass it back and forth to your java code as a java long. You cast it it and from your class pointer. Provide an explicit java method to free it when done. Besides providing the explicit method also implement a finalizer to free it as well (however that is a fail safe and should not be relied upon.) -
XML Deserialization Error when calling WebService-method
Hi all,
when calling a WebService-method from my WebDynpro-application, I get the following error message:
"Deserializing fails. Nested message: XML Deserialization Error. Can not create instance of class [com.karmann.ApplMan.dto.SoftwareKomponenteDTO] when deserializing XML type [urn:com.karmann.ApplMan.dto][SoftwareKomponenteDTO].."
SoftwareKomponenteDTO is a class that I have implemented. It implements Serializable and overwrites the methods "equals()" and "hashcode()". It contains members of types long, String and java.sql.Date.
The method I call needs an argument of type SoftwareKomponenteDTO. Other methods which return something of type SoftwareKomponenteDTO do not make any problems.
The same error message appears when I test the WebService-method in the WebService-navigator. So I assume that the problem is not the way I call the method from WebDynpro.
Thanks for help,
ChristophHi all,
I found what my problem was. The complex type that I deliver to my method (i.e. SoftwareKomponenteDTO) must have a public constructor without parameters. I think that this is slightly confusing, because in the other direction (method delivers complex type as return value) this is not neccessary. Anyway, my problem's solved now.
Regards,
Christoph -
CallerPrincipal when calling one sessionbean from another
Hi all,
I have a little problem when calling one sessionbean from another sessionbean. The problem is, that in the method, which is called, is used SessionContext's getCallerPrincipal().getName(). This works great from client, but from other sessionbeans getCallerPrincipal() retuns an "ANONYMOUS" principal. How can I set the correct principal (the principal from the first sessionbean)?
Thank you
My env: Glassfish 2.1.1, Netbeans 6.8, Eclipselink 2.0.0, Java 1.6.0.18
My code:
@Stateless
public class ABean implements ASessionRemote{
@Resource
SessionContext ctx;
@Override
public void aMethod(){
String name = ctx.getCallerPrincipal().getName(); // the name is ANONYMOUS, when the call is done from other sessionbean
@Stateless
public class BBean implements BSessionRemote{
@Resource
SessionContext ctx;
@EJB
private ASessionRemote aSessionBean;
@Override
public void bMethod(){
aSessionBean.aMethod();
}"This works great from client"
What do you mean by this, i.e what sort of client are you using (stand alone app, servlet) ?
what shows up if you printout the caller principal in the calling bean ?
are the two ejbs in the same ear ?
what security meta-information are you using in ejb-jar.xml and sun-ejb-jar.xml, if any ? -
Video only enabled when call is initiated from one direction across SIP Trunk
wonder If anyone can shed some light on this.
I have an issue between two cucm clusters, tied together with a SIP trunk.
If we dial from Australia to the US there is two way video and audio. If the US calls Australia, there is only audio. I have run a test call from the US through VLT and have found the following SDP's (see below). When The US make a video enabled call to australia the message "Video is not available, Remote party has video off" on the US phone screen.
Both clusters have the SIP trunk set up with the same codec settings and video bandwidth between reqions and locations. the SIP trunk is configured pretty much stock standard and identical at both ends, yet the SDP seem to want to negotiate different Video Parameters (again see SDP's below). CUCM in australia is 10.61.2.82.
what other settings can I check to get video to work when calls get initiated from either direction,...................
both phones are SIP 8941's, again audio is no problem in both directions.
=======this is from the phone in Australia to the CUCM in australia phone IP 10.61.4.112======================================
45870304.002 |09:02:07.941 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.61.4.112 on port 34271 index 53563 with 2089 bytes:
[344530309,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.61.2.82:5060;branch=z9hG4bKe0103892bbb75
From: "Anonymous" <sip:[email protected]>;tag=109791678~1b5af941-cea2-4a00-a0bd-15a532224d7d-59374526
To: <sip:[email protected]>;tag=5057a887bfdd550c0d321a20-7f843426
Call-ID: [email protected]
Date: Wed, 29 Apr 2015 23:02:07 GMT
CSeq: 101 INVITE
Server: Cisco-CP8941/9.4.2
Contact: <sip:[email protected]:34271;transport=tcp>;video
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE,INFO
Remote-Party-ID: "Dennis Mink - 33935" <sip:[email protected]>;party=called;id-type=subscriber;privacy=off;screen=yes
Supported: replaces,join,sdp-anat,norefersub,resource-priority,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-7.0.0,X-cisco-xsi-8.5.1
Allow-Events: kpml,dialog
Recv-Info: conference
Recv-Info: x-cisco-conference
Content-Length: 966
Content-Type: application/sdp
Content-Disposition: session;handling=optional
v=0
o=Cisco-SIPUA 28123 0 IN IP4 10.61.4.112
s=SIP Call
t=0 0
m=audio 16736 RTP/AVP 0 8 18 102 9 116 101
c=IN IP4 10.61.4.112
a=trafficclass:conversational.audio.avconf.aq:admitted
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 16738 RTP/AVP 126 97
c=IN IP4 10.61.4.112
b=TIAS:2000000
a=trafficclass:conversational.video.avconf.aq:admitted <----this is missing from US SDP
a=rtpmap:126 H264/90000
a=fmtp:126 profile-level-id=428014;packetization-mode=1;level-asymmetry-allowed=1;max-mbps=36000;max-fs=1200;max-rcmd-nalu-size=1300
a=imageattr:126 send * recv [x=640,y=480]
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=428014;packetization-mode=0;level-asymmetry-allowed=1;max-mbps=36000;max-fs=1200
a=imageattr:97 send * recv [x=640,y=480]
a=rtcp-fb:* ccm tmmbr
a=sendrecv
============below is coming from the US (phone IP is 10.1.109.81)================
04/30/2015 09:02:08.169 Send 10.61.4.112 SIP ACK bfa99a00-541162ed-71da57-52023d0a NotAvail
SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.61.4.112 on port 34271 index 53563
[344530326,NET]
ACK sip:[email protected]:34271;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.61.2.82:5060;branch=z9hG4bKe010481f320b08
From: "Anonymous" <sip:[email protected]>;tag=109791678~1b5af941-cea2-4a00-a0bd-15a532224d7d-59374526
To: <sip:[email protected]>;tag=5057a887bfdd550c0d321a20-7f843426
Date: Wed, 29 Apr 2015 23:02:05 GMT
Call-ID: [email protected]
User-Agent: Cisco-CUCM10.0
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 456
SDP Message
====================================================
v=0
o=CiscoSystemsCCM-SIP 109791678 1 IN IP4 10.61.2.82
s=SIP Call
c=IN IP4 10.1.109.81
b=TIAS:8000
b=AS:8
t=0 0
m=audio 16412 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=trafficclass:conversational.audio.aq:admitted <---what does this do here, and how?
m=video 0 RTP/SAVP 31 34 96 97 <-----------port 0. why?
a=rtpmap:31 H261/90000
a=rtpmap:34 H263/90000
a=rtpmap:96 H263-1998/90000
a=rtpmap:97 H264/90000
a=content:main
a=inactiveHi Dennis,
On US phone SDP media attribute is inactive.
a=rtpmap:97 H264/90000
a=content:main
a=inactive
Are you sure that audio works ? Can you please share all the SIP messages of both the scenarios.
Thanks
Manish -
Call Java method from c/c++ from native thread
Hi,
I know how to call a method from c/c++ with jni back to Java
but this fails when I try to do this from a native thread.
I can get the object class (jclass) but its seems to fail to get a method from that class.
How to make it work?
Thanks in advance.Ok, problem has been solved
I just get the jmethodID inside a JNI method and pass it to the thread.
Maybe you are looking for
-
How to print from iPhoto in the Czech Republic?
There is no option to select Czech rep. in the iPhoto print services. Closest state - Austria does not accept any Czech adress, therefore no option to get it send back to here. Does anybody have any trick, how to get it printed, exported etc to get p
-
How to extract special characters from a field
Hi there. I am a novice when it comes to Web Intelligence reports. I have been tasked with producing a final report that I can export to Excel which shows a project number and a project name. Very simple. Ultimately I need to import my final Excel fi
-
Songs Not Appearing in Library Correctly
After loading a CD into my library, only two or three appear with song titles/artist names -- the other songs are dumped in a file with simply "track 1", "track 2", etc. Anyone know what I'm doing wrong and how to correct it? Thanks
-
Can only see address bar.
When I open Safari the only thing that comes up is the address bar the rest of it just sort of disappeared (I see my wallpaper not the internet). Google Chrome is showing the whole image so it's just Safari. I'd post a screen shot but I don't see any
-
Sd/ssd max throttle in solaris 10 etc/system
Guru! I need to add any of following lines to /etc/system file for my new Hitachi storage (attached to the Soalris10 Box) setsd: sd_max_throttle = 16mm setssd:ssd_max_throttle =16 I want to know the difference between them and also how can I make sur