Standard Planning function Type

Hi,
Would anybody give some example of standard planning function type except COPY and REVALUATION.
Points will be awarded to the suitable reply
Regards,

Hi ,
Kindly go through the below link for more details on all standard functions,
[http://help.sap.com/SAPHELP_NW04s/helpdata/EN/43/37d8c2af4c1bcbe10000000a1553f7/frameset.htm]
1. Unit conversion:
           Consider that all your planned records are in "G" unit and if you want to convert this to any other unit like "Pound", then you can use this planning function. The prerequisite for this is, you need to create a suitable "Unit conversion type" using the tcode: RSUOM, for converting "G" to "Pounds".
2. Currency Translation:
           Consider that all your planned records are in "EUR" currency and if you want to convert this to any other currency like "USD", then you can use this planning function. The prerequisite for this is, you need to create a suitable "Currency translation type" using the tcode: RSCUR, for converting "EUR" to "USD".
3. Deleting Invalid Combinations:
            Consider that you did not have any characteristicc relationships in your project and hence you have invalid data in your planning cube. For example, you have 'Product' and 'Product Group' in your cube and the end user has entered wrong values for 'product group' for a corresponding 'product'. In this case you can create a characteristic relationship for 'Product' and 'Product Group' and then execute this planning function so that all the records with invalid relationships between 'Product' and 'Product Group' will be deleted.
4. Repost:
         This is similar to 'Copy' planning function. But the only difference is 'Copy' copies the records from source to target. But 'Repost' moves the records from source to target, (i.e.) after the records are copied they are deleted in the source.
5. Repost (Characteristic Relationships):
         This is similar to 'Deleting Invalid Combinations' but the only difference is, instead of deleting the invalid combinations, this function reposts the old relationships to the new correct ones based on active characteristic relationships.
6. Distribution by Key:
        You can use the Distribution by Key function type to generate the characteristic combinations to which data is distributed in accordance with the master data and characteristic relationships. The key figure values are distributed according to the expressly specified distribution keys. These are distribution functions that determine the weighting of the distribution.
For example, you have planned revenue based on 'Country' but you have some part of the revenue which is "not assigned" to any country. You can use this planning function to distribute this "Not Assigned" revenue to any particular "Country".
7. Distribution by Reference Data:
          You use the Distribution by Reference Data function type to generate combinations of characteristics that correspond to the reference data. The system distributes data in accordance with these combinations. The key figure values are distributed by percentage in accordance with the reference data. You use the table for key figure selection to select the key figures that you want to distribute.
For example, you have actual values for the year '2011' and you want to use this data to distribute it to the future year '2012'.
In this case you can use this planning function, to distribute the '2011' data to '2012'. The prerequisite for this is there should be planned data already available for the year '2012'. This function is used after the manual planning is done for the future year.
Hope this clears your doubt.
Regards,
Balajee

Similar Messages

How to indicate a message by a planning function type in an ABAP-OO-Class

Hello,
I integrated a message with following statement " MESSAGE i003(upf1) WITH v1 v2." in an ABAP-OO-Class, which is used by a Planning Function Type. The function type works but it´s not indecated after executing the Planning Sequence, neither from web template nor in the planning modeller.
Does anybody know this problem/behavior?
Thank for response
Andreas

Hi Joerg,
how about this:
data: l_dummy type char100.
MESSAGE i003(upf1) WITH v1 v2 into l_dummy.
i_r_msg->add_msg( ).
You do not need to take special care about the variables. Just raise the message as you want it to be raised. The only thing you need to do is to raise the message into a string (..into l_dummy). The interface IF_RSPLFA_MSG and the implemetation of add_msg is going to read the standard message variables (SY-MSGNO, SY-MSGID, SY-MSGTY, MSGV1 ...). You just need to throw the message
and call i_r_msg->add_msg( ) e.g. in the execute method of your customer planning function.
Please give it a try and take a look at it in the debugger.
Hope this helps.
Matthias Nutt
SAP Consulting Switzerland

BI Integrated Planning Self-defined planning function type ( RSPLF1 )

Dear all,
I got 2 questions regarding the new BIIP customer defined planning function type.
1. How do we create the class for the planning function type ? Do we copy standard one( like CL_RSPLFC_DELETE ) as template ? Or , can we create a class whcih use standard class as a supper class and change the methods as we want?
2. Since the planning modeler is running on web , is it possible to debug the self-defined planning function type in SAPGUI?
Thank you,
Jeff

Hi Jeff,
from the documentation it seems that you have to copy the delivered Classes: two methods are mandatory (the ones about execution IF_RSPLFA_SRVTYPE_IMP_EXEC and IF_RSPLFA_SRVTYPE_IMP_EXEC_REF). See the on line help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/548bafbc0f357ee10000000a11466f/frameset.htm
I didn't try yet, did you? Have you experienced something different?
Best regards
GFV

BIIP Self-defined planning function type ( RSPLF1 )

Dear all,
I got 2 questions regarding the new BIIP customer defined planning function type.
1. How do we create the class for the planning function type ? Do we copy standard one( like CL_RSPLFC_DELETE ) as template ? Or , can we create a class whcih use standard class as a supper class and change the methods as we want?
2. Since the planning modeler is running on web , is it possible to debug the self-defined planning function type in SAPGUI?
Thank you,
Jeff
How can I move this post to BPS forum?
Message was edited by: Jeff Huang

Jeff,
Copying a standard planning function is the simplest way to begin and CL_RSPLFC_DELETE is the simplest function, so that is the ideal one to start with (assuming you are not looking to collect reference data as well).
As far as debugging, simply put a hard BREAK-POINT statement in your method(s) and it will break as desired whenever you test it from the planning modeler.
Michael

BI IP - Planning Function Type Formula Error "Characteristic not Supported"

Hi all,
I have created a planning function type formula with very simple code. The code was copied from SAP Library and FISCPER was replaced with 0CALDAY. I continue to get an error 'Characteristic 0CALDAY is not supported".
The characteristic 0CALDAY is in the Infoprovider and the aggregation level. I have tried 'To Characteristic Usage' with both changed and in condition.
DATA D1 TYPE D.
DATA D2 TYPE D.
DATA I1 TYPE I.
DATA I2 TYPE I.
DATA CALDAY TYPE 0CALDAY.
FOREACH CALDAY.
CALCULATE 1ST DAY OF ZCALEND
D1 = C2DATE( CALDAY, S ).
CALCULATE LAST DAY OF CALDAY
D2 = C2DATE( CALDAY, E ).
CALCULATE THE DIFFERENCE BETWEEN LAST AND 1ST DAY MINUS TWO DAYS
I2 = 2.
I1 = D2 - D1 - I2.
    MESSAGE I001(UPF) WITH 'DIFFERENCE' I1.
ENDFOR.
Thank you in advance for any help.
Teri

Thank you very much for your reply. What would you suggest? I must use 0CALDAY. As you can tell I am very new to IP, I have tried other options for example:
DATA ZDAYS TYPE I.
DATA ZDT TYPE ZCALSTART.
DATA ZDF TYPE ZCALEND.
ZDT = ZCALSTART.
ZDF = ZCALEND.
ZDAYS = ZDT-ZDF.
{KF,ZDT,ZDF} = ZDAYS.
I received an error "ZCALSTART could not be recognized"
I also tried to call a function. 'FIMA_DAYS_AND_MONTHS_AND_YEARS'.
DATA D1 TYPE D.
DATA D2 TYPE D.
DATA DD TYPE I.
DATA CALS TYPE ZCALSTART.
DATA CALE TYPE ZCALEND.
D1 = CALS.
D2 = CALE.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
    I_DATE_FROM          = D1
I_KEY_DAY_FROM       =
    I_DATE_TO            = D2
I_KEY_DAY_TO         =
I_FLG_SEPARATE       = ' '
IMPORTING
   E_DAYS               = DD.
E_MONTHS             =
E_YEARS              =
I received an error "Types of parameter I_DATE_FROM () and variable D1(D) are inconsistent". From what I could find they should be consistant. Please provide any suggestions. Thank you!
Teri
Edited by: teri chandler on Mar 30, 2010 3:26 PM

Planning function type Exits.

Hi,
Could you guys tell me about Planning Function Type Exits. It will be helpful, if you guys send some Documents to [email protected]
Thanks,
meiy.

Hi,
Here is the step by step procedure for that.
I assume that you have already created a planning level and Planning package.
1.Double click on planning level
2.From Context menu of planning Function(2nd panel which lying below the Planng area/level panel)-->create planning function
3.Enter Tech name and description for planning function
4.Expand 'all functions' tab -->double click on 'Exit function'
5.Here you have to provide Function module for initialization(if necessary), and Function module where you have to write the logic, and 'Fields to be changed' and 'parameter name and data element for the same'.
6.Now create a Parameter group from context menu of Planning function and Provide necessary values as per your requirements.
Hope this helps

Enhance planning function type exit in BPS

Hello,
I have 2 questions concerning planning functions type exit in BPS:
1. Is there any way to do a check, if the data is from the selection of the planning package itself or created in the planning function, when looping over the XTH_DATA table. I mentioned, that the loop is done also over the newly created data. Now, I copy the XTH_DATA into a working version, add the data to it and assign it afterwardws.
2. I create new lines of data in the planning function. These lines can also contain data, which is not in the package selection. Now I need a condition for not writing the data, which checks, if the data can be added to the XTH_DATA or otherwise skips this particular line.
Background is, I don't want to read the variable values from the package selection to keep it more generic.
Hope anyone of you can help me solving these problems. Thanks in advance...

Hello Jerrit,
there's no indication in XTH_DATA if data was already existing or is new. You have to program this logic yourself.
The selection of the planning package is passed to the exit in ITO_CHASEL. So you do not have to read the package or variables. However, checking data (XTH_DATA) against this selection can be quite performance intensive. If you are dealing with high data volumes such a check will probably take too long.
Regards
Marc
SAP NetWeaver RIG

Documentation for new Planning function types in 2004s

Hello,
We are analyzing the impact of migrating former BPS exit planning funtions to the new BI Planning function types. In fact, we are checking the SAP procedure for reusing the BPS exits from BI Planning, although I would like to know if there is some kind of procedure or documentation (I have already read the documentation in Business planning developer guide) for a quick reimplementation in BIP.
Thank you for your help.
Regards.
Message was edited by: Ignacio Arroyo
Message was edited by: Ignacio Arroyo
Message was edited by: Ignacio Arroyo

Hi
Please check below URL for the BI IP planning function types.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/37d8c2af4c1bcbe10000000a1553f7/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/37d8c2af4c1bcbe10000000a1553f7/content.htm</a>
Hope it Helps
Chetan
@CP

Can not create planning function types (for process empty records)

Hi! SAP Experts,
I want to copy 0RSPL_FORMULA to another function types for processing empty records, ZRSPL_FORMULA. I checked this function type via RSPLAN, there is no error!. But when i try to use it in planning modeler. We found the error message "Infoobject 1FORMULA is does not available in version A". Do we need to create this infoobject?... Anyone know, please let me know.
Thanks,
Sake

Hi!,
Thanks for your help but I've already put that parameter,HIDDENFORMULAVARTAB->1FORMULA, in my planning function, ZRSPL_FORMULA. I validated it and no error found. But when I go to planning modeler, in web browser, and try to create a new planning function based on ZRSPL_FORMULA. I found the problem as I mention in previous message, "infoobject 1FORMULA is not available in version A". I try to search this infoobject in my system. The result is there is no this infoobject in my system. So, my question is do i need to create it with myself? What kind of infoobject i have to create? Key Figures or Characteristics?
Anyway, If I have to do this, why 0RSPL_FORMULA still used as normal.
Brgds,
Sake

How to call standard planning function in FOX code

Hi,
I want to call std. Distribution by reference planning function in FOX formula. Through CALL FUNCTION std planning functions can not be used.
My requirement is that because I need to execute this distribution function thousands of times with different variable values so I am planning to pass the values for these variables through FOREACH loop.
Any help is appreciated.
regards
Amit Jain

Hi Amit,
unfortunately calling a planning function inside a planning function is not possible. And calling a planning sequence from a planning sequence is not supported as well.
I think is is better if go for a more complex FOX or an exit-function if the planning function needs to be executed online.
Another way some customers are using to met similar requirements is writing a z-program which determines the variable values in a loop (e.g. by reading a z-table). Inside the loop they set the variables (in the variable container) and when this is done execute a planning sequence for the current variable setting. The whole thing could be executed e.g. in a process chain.
Hope this helps ...
Regards Matthias Nutt
SAP Consulting Switzerland

Standard function type Forecasting in BPC.

Hello everyone!
Since BPC 7.0 NW does not have an standard planning function type forecasting (BPS/BI-IP) as a tool to predict the future development of key figure values (signeddata). What could be a good way to implement this function in BPC?
Any work around ideas?
Thanking you in advance.
Regards,
Russbel.

Hi Russbel,
I posted a presentation created by the EPM RIG in the forum.
Creating Custom Script Logic Keyword BADI's - BPC NW
Cheers,
Scott

Function types for Balance Sheet Planning missing in SEM-BPS 6.0

Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA     700     0013     SAPKA70013     Cross-Application Component
SAP_BASIS     700     0013     SAPKB70013     SAP Basis Component
PI_BASIS     2005_1_700     0013     SAPKIPYJ7D     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
FINBASIS     600     0010     SAPK-60010INFINBASIS     FINBASIS 600 : Add-On Supplement
SEM-BW     600     0010     SAPKGS6010     SEM-BW 600 : Add-On Supplement
BI_CONT     703     0007     SAPKIBIIP7     Business Intelligence Content
Message was edited by:
        Lars B Rasmussen

Hi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK

BI IP: How to create a message in custom developed planing function type

Hello experts,
I try to set a message in a ABAP planning function.
I created a own planning function type and implemented the class in ABAP.
Everthing is working fine until here. But how can I create a message which is visible in the report.
Is it just to use the command " MESSAGE" ?
Or do I have to use paramteres of the ABAP class.
I've just implemented the interface IF_RSPLFA_SRVTYPE_IMP_EXEC and cannot find parameters for this.
Thanks in advance
Johannes

Hi Johannes,
please check
Custom Messages WAD
Re: How to indicate a message by a planning function type in an ABAP-OO-Class
Regards Matthias

Error when creating a planning function

hi,
I am creating a Planning function type using RSPLF1. Also i have created a custom class for the same. But when i try to create a planning function through RSPLAN, and using this custom planning function type, I get the following error:
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
    at java.util.Vector.get(Vector.java:733)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.hlp.FromToStore2.getToList(FromToStore2.java:74)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._fillTableFromStore(FromToHelperComp.java:1422)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._loadAll(FromToHelperComp.java:1825)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp.setAll(FromToHelperComp.java:388)
    ... 53 more
Can anyone let me know what this means and what I am missing ?

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Error while executing planning function with reference data

Hi,
I have a two planning functions one is used to upload the file (with out reference data checkbox in planning function RSPLF1) and other planning function ('Referece data'check box is selected in custom planning function RSPLF1) to execute the logic of creating new record along with the flat file data.
Following data is uplooaded
Company code | Profit_ctr | calmonth | Amount
1000                 | 50000      | 01.2011 | 150
Cube data
Field1    | Company code | Profit_ctr | calmonth | Amount
         | 1000                 | 50000      | 01.2011 | 150
Z1         | 1000                 | 50000      | 01.2011 | 150
Now I want to change the value from 150 to 200 and when I try to execute with the following data, it is giving dump 'a row with the same key already exists'.
Company code | Profit_ctr | calmonth | Amount
1000             | 50000          | 01.2011 | 200
Ideally in the second execution it should append the new row with Amount value 50 to cube which is the delta value.
I debugged the issue and found that I_TH_REF_DATA has following data and C_TH_DATA also contains the same records.
Field1     Company code | Profit_ctr | calmonth | Amount
#     1000                 | 50000      | 01.2011 | 150
Z1     1000                 | 50000      | 01.2011 | -150
Z1     1000                 | 50000      | 01.2011 | 150
Due to this, record which already exists in C_TH_DATA and trying to append new record with the same combination is failing.
C_TH_DATA should only contain the source data of Amount 200, but not sure why reference data is coming in C_TH_DATA.
Could anyone please guide me on how the reference data is getting populated in C_TH_DATA ?
Thanks in advance
Edited by: peppy on Aug 3, 2011 5:00 PM
Edited by: peppy on Aug 3, 2011 8:37 PM

Hi Peppy,
C_TH_DATA is hashed table! According to your post you are trying to append to C_TH_DATA and this results in a dump. Please take a look at the standard planning function to see how SAP is programming the planning functions. E.g. in CL_RSPLFC_REPOST method IF_RSPLFA_SRVTYPE_IMP_EXEC~EXECUTE you can find the following code:
CREATE DATA l_r_data_wa LIKE LINE OF c_th_data.
ASSIGN l_r_data_wa->* TO <s_data_wa>.
CREATE DATA l_r_new_wa LIKE LINE OF c_th_data.
ASSIGN l_r_new_wa->* TO <s_new_wa>.
LOOP AT c_th_data INTO <s_data_wa>.
<s_new_wa> = <s_data_wa>.
now the SAP code changes the values, you can do it your way here
and than write the changes back
        MODIFY TABLE c_th_data FROM <s_data_wa>.
ENDLOOP:
Another option is to use the READ statement to check if the record is already in the table. If not, you can use MODIFY otherwise you use INSERT. So you get something like this:
READ C_TH_DATA from <s_data_wa> transporting no fields.
if not sy-subrc EQ 0.
INSERT <s_data_wa> into table C_TH_DATA.
else.
MODIFY TABLE c_th_data FROM <s_data_wa>.
endif.
Depending on your requirements you can also use the collect statement.
If c_th_data shows the reference data as well, you may need to adjust the filter to restrict it to the correct values.
Hope this helps.
Best regards
Matthias Nutt
SAP Consulting Switzerland

Standard Planning function Type

Similar Messages

Maybe you are looking for