Standard Quality Management Report

Plz any one tell me standard quality control reports in sap for detail that how much material accpet and reject after result analysis/usage decision

Hi Punit,
Please try following t-codes,
MCVA
MCVE
MCVE
MCXA
MCXC
Anand

Similar Messages

  • Cash Management Report Requirement

    Hello All
    We have a requirement where  the users want to track thier receivables and forecast cash.
    They would like to see someting like
    Customer.... due before period, due during period, due after period,  Sales order due before period, during period and after period.
    Can anyone please suggest the best way to proceed for this kind of reporting.
    Thanks
    Sanjeev

    Hi Sanjeev,
    standard Cash Management reports that SAP offers are transactions FF7A (Cash positions) and FF7B (Liquidity forecast). Apart from it you can create own reports using transaction TRM0.
    BR, Tomislav

  • Standard Asynchronous ES for Quality Management interface

    Hi,
    Synchronous standard ES is available for Quality Management interfaces under ES bundle. 
    Could you please suggest if there is any standard Asynchronous ES available for above QM interfaces like Inspection plan, Inspection results and Usage Decision.
    Br,
    Madan

    Dear Hummel
    This link required SAP ID and use less for those who do not have S User ID's.
    further more.... could you please differentiate Stand SAP QM process compare to QM process in  RDS?

  • A Quality report as a tool for the Quality management of Web services

    Hi everybody,
    I would like to explain and discuss my current research project with you:
    The differentiation from competitors is crucial for the economic success of a product. This differentiation can be achieved in addition to price and the date of the market entry through the product quality. To differentiate the quality of products, it is necessary to distinguish between several relevant product characteristics, to determine their values, to evaluate these values and to relate this evaluation to the evaluation of other products. Techniques for the determination of the quality of a product are used in many areas of the quality management, e.g. in the quality assessment.
    Web Services are software systems supporting a machine-machine interaction over a network. Web services are often used as modules in different software architectures, especially in Service-oriented architectures (SOA).
    In the course of quality management of a Web service applied in software consequently needs appropriate procedures and quality models as means to determine the quality. As there is a lack, research is needed in this field.
    In order to eliminate the described deficit, a procedure is to develop that helps to determine the quality of a Web service. A report is conceivable which integrates all relevant views, all influences on the quality and all phases of the life cycle of a Web services.
    During the research a lot of similarities between Life cycle assessments of environmental management and the quality management have been identified. These similarities include e.g. principles, procedures and the terminology. Since the Life cycle assessments relate on the product life cycle, on the stakeholders and on all relevant product characteristics, an adaption of the method on the quality management of software seems to be promising.

    I would like to answer the following two research questions:
    - Is it possible to adapt the principles and procedures of Life cycle assessment and Sustainability reporting to the quality management of Web services?
    - Is a quality report based on these findings an appropriate tool for quality management?
    Do you have any experiences with the quality management of Web services? Which procedures do you use to determine the quality of Web services? How are your experiences with that procedures? Where are their weaknesses?
    Edited by: Bastian Grabski on Jan 7, 2010 11:36 AM

  • Batch Management report Issue.

    Hi Friends,
    I have a question on batch management report, for detailed information please see the steps below
    Step 1 : I have material X and Y created with class u2018XYZu2019, and characteristic value temperature 10 u2013 100 c
    Step 2 : I have done Goods receipt for both the material
    Material document     Material     Batch Number     Characteristic Value
    123          X     TEMP1          10 C
    124          X     TEMP2          10 C
    125          Y     TEMP3          10 C
    126          X     TEMP4          20 C
    127          Y     TEMP5          20 C
    I have two questions now?
    1.     Is there any report to find out the list of materials with characteristic value 10 C?
    2.     is there any report to find out list of batches for 10 C?
    Thanks and Regards,
    Chalaa

    There is no standard report for your requiremet, go for ABAP development.

  • Is Quality management module required to be used for vendor evaluation?

    Hi,
    There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are rejected). Can I get this report without using QM?
    Thanks in advance,
    Satish

    you can enter Quality results manually in vendor evealuation, so QM is not necessary for this, however with QM you can get the scores semi-automatic and  automatically.

  • Oracle Reports - Distributing Multiple Reports in a Management Report

    Hi,
    I am new to Oracle Reports and would sincerely appreciate some guidance.
    Requirement.
    I plan on using Oracle Reports to write multiple reports containing Text, Graphs, Crosstabs, Tables etc. There are 3 developers and each will be developing a number of reports.
    At the end of each month, we need to run all the reports and publish it into a Management Report Pack.
    This Management Report Pack must contain a table of contents with the names of the different reports and page numbers. Each Report in the Report pack needs to have a header, footer and page number.
    The number of reports will change on a monthly basis so the page numbering will not be specific to a report.
    Summary,
    3 developers writing multiple reports
    All reports must be run and then printed out in a specific order.
    Table of Contents page with page numbering for each report.
    How can we do this with Oracle Reports?
    Is it possible, and if so, how?
    What is involved and what is required?
    Your assistance is highly appreciated.
    Thank you.

    You should be creating a universe using the table with filter utilizing a column which accepts a parameter value of language and shows the data in that specific language. This concept is already used in SAP standard audit universe which accepts language for any query and shows the data in that language.. The logic for the derived column for the table should look something like below Table.LANGUAGE = @Prompt(Select language)

  • Quality Management - Usage Decision error

    Hi all,
    My scenerio is - There is a material ABC which is procured from the supplier. The Quality of the material is 'below standards'. However, material ABC, in Tcode QA11 Usage decision was done as ACC1 (accepted). Since the material ABC is not meeting quality standards, Usage decision is changed to RET1 (Bad Raw Material - Return) using Tcode QA12.
    Now the problem is that when I enter QA11, the system does not allow me to enter as a message appears 'Detailed Info- Usage decision made is disallowed' is showing.
    Please provide me a solution as the material is lying in the unrestricted stock and it has to be returned to the supplier. Also please consider costing implications.
    Thanks in advance

    Cancel the inspection lot in QM using the function to change the usage decision.
    Logistics - Quality management - Quality inspection - Inspection lot - Usage decision - Change with History - Usage decisions - Functions - Cancel lot 
    Reward if cleared and close the thread.

  • Integration with Quality Management

    Dear Friends,
    We want to integrate DMS with Quality Management. We want to attach originals in the transactions Quality Usage Decsion (QA12 ) and Inspection lot (QA03).
    I didn't found any objects for these. Is there any standard objects there. How can we bring the tab / screen for attaching / assigning DMS document in above said transactions.
    Regards,
    Sai Krishna

    Hi friends,
    Does any one can clear my doubt.
    Shall I know the difference between "service for object"  (for certain transaction availble on top left corner) and DMS link (thru customization adding Object link ). Sall I know the advantages / disadvantages in both cases.
    SAP didn't given DMS link for all certain transactions like QA12 . In that case can we allow the users to use this functionality for certain transactions like QA 12 thru authorization.
    When we are using DMS, how to restrict the users not use this.
    I do understand that we can create new objects and assign to DMS Doc. types. We can do it thru SE 80 or  create new objects, module pools SAPLCV130 and SAPLCV140 and function module OBJECT_CHECK_XXXX (XXXX = object name).
    Regards,
    Sai Krishna

  • CC 5.1:Incorrect Management Report

    Hi All,
    I have the following 2 queries:
    1. I have created one user 2 days  ago in production system 
       and assigned SAP_ALL profile. There are 2 background
       jobs scheduled to run daily and those are:
        1.User/Role/Profile Synchronization (Incremental)
        2.User/Role/Profile/Critical Actions Batch Risk Analysis
           (Incremental) with Management Report option selected
       I have been monitoring these jobs daily and these job are running fine and are in Ready status.
    However much to my surprise, the number of violations have not been increased inspite of assigning SAP_ALL profile! Earlier, when I assigned SAP_ALL profile to any user on temporary basis, CC immediately increased the number of SOD violations to 2 or 3 times what already is available.
    FYI: when I am doing user analysis from Informer Tab,
    the user Id what I have created is properly shown. If I
    select "Critical Roles/Profiles" as  Report Type, its showing
    that this user is assigned SAP_ALL profile.However what
    I expect is that SOD violations should also increase in
    Informer Tab. Otherwise, the results shown by CC are not
    reliable.
    Kindly suggest me any work arounds.
    2.When we run these reports, in Informer tab, CC shows all
        SOD violations based upon certain criterion. But my
        question is: Is there any way by which we can determine
        like what changes have been made to what objects (Users
        Roles or Profles) during a particular period of time, lets
        say during last two days?
    Hope somebody would answer or suggest!
    Thanks and Regards,
    Faisal

    Is SAP_ALL set as a critical role/profile and if so are you deliberately excluding critical roles/profiles from standard reports via configuration?

  • Quality Manager - Clearing Unscored Call recordings

    Probably a very basic question, but unfortunately I'm not yet familiar with this product.
    Some of our supervisors wish to clear out a backlog of "Unscored" recordings from the list in Quality Management Desktop, so that they can start with a clean slate the following week.
    Can anyone advise how to do this? I've searched documentation and googled but haven't had much luck.

    Hi
    The unscored reports will eventually disappear.
    You set different retention periods for scored and unscored recordings in the admin tool.
    The idea is that you might for example set:
    2 weeks for unscored
    1 week for scored
    Then your scored recordings would disappear after being available for a week for review, and the unscored ones will be around longer to allow time to get round to scoring them.
    The scores are then kept on file (along with answers to the rating questions etc) for reporting purposes.
    The retention periods are configured on the Workflow in QM Desktop Administrator...
    Regards
    Aaron
    Please rate helpful posts...

  • Solution Manager 7.1 SP10- Alert Management Reporting no input

    Hello there,
    we use the Solution Manager 7.1 SPS 10 for System Monitoring (with customer specific tempaltes and SAP Standard templates), the PI/PO MOnitoring an some other Features.
    By the way if we start the dashboard for "Alert Management Reporting" we don't get any data.
    Also we can't select the managed objects.
    In the "BI Diagnostic Center" there is the overview for the Reporting Scenarios. We see our Scenarios "System Reporting" and "End USer Experience Moitoring" active. When i select "Alert management Reporting" and try to click the Button "Scenario Setup" nothing happens.
    Is this a bug?
    Can anybody help me get the Alert Management Reporting Dashboard run?
    Thanks and kind regards
    torsten

    Hi Torsten,
    Please follow the instructions of the note 1862024.
    The ALM extractor is scheduled within the "Technical Monitoring"
    setup in SOLMAN_SETUP, step 7. Before in the scope selection you need to
    select the solution manager system. If the extractors are already
    active, you'll need to deactivate (also uncheck the "keep
    custom settings if checked), then restart SOLMAN_SETUP and re-activate.
    Kind regards,
    Roland

  • SAP Data Quality Management: how to replace input fields

    Hi all,
    the input fields in the SAP DQM 4.0 Real time job Job_Realtime_DQ_SAP_Name_And_Address_Match are:
    REC_NUM
    NAME_FIRST
    NAME_LAST
    NAME1
    NAME2
    HOUSE_NUM1
    STR_SUPPL1
    STREET
    CITY1
    COUNTRY
    POST_CODE1
    REGION
    ADDR_TYPE
    MTCSTD1
    MTCSTD2
    PO_BOX
    POST_CODE2    
    THRESHOLD
    I want to replace one of the fields (i.e ADDR_TYPE) with "Account_group" column.
    The idea is replace, not create of additional fields ( as described in SAP BusinessObjects Data Quality Management (DQM): Enhancements for more fields other than address data for Duplicate Check SAP Business Objects Data Quality Management ( DQM ) Enhancements for more fields other than address data for Duplicate Check.).
    Could you please let me know if the standard  XML file sent by the RFC server contains the Account_group column.
    Any other suggestions and ideas are welcome
    Thanks in advance
    Goran

    Hi,
    the additional data tab is controlled by means of classes created in DMS.
    if your requirement is something like,
    project name
    responsible person name etc..
    for this - in CL01, you can create class, say Project XYZ
    in CT04 - you can create characteristics as project name and person name..etc for this class.
    in each characteristics you can maintain the values which will serve the requirement.
    hope this helps U..!
    Thank You,
    Manoj
    award points if useful..!

  • Management Reporter CU11 Timing Out

    Morning All,
    I use SQL 2012 and I installed Management reporter CU11, but I keep getting this error message after installing management reporter CU11;
    Tasks.RecordException] Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Stack trace: Inner Exception: [System.ServiceModel.FaultException`1[Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceFault]]
    Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Stack trace: at Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceBase.HandleException(Exception exceptionToHandle, ReportingException
    exceptionToThrow, Boolean logError) at Microsoft.Dynamics.Performance.Reporting.Common.Service.ServiceBase.BaseExecute[TResult](Func`1 executor) at Microsoft.Dynamics.Performance.Integration.Reporting.Adapter.CompanyProvider.InsertCompany(IntegratedCompany
    item) at Microsoft.Dynamics.Performance.Integration.Reporting.Adapter.CompanyProvider.WriteObject(Object value) at Microsoft.Dynamics.Integration.Service.Tasks.RecordWork.DoRecordWork(DbMap map, Object key, OperationType operationType, String loggingSourceName)
    User: XXX\administrator Machine: 

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is only one forum among the many
    that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.  This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
    don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more
    detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…?
    forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • BADI for SAP Claims Management Reporting

    Does anyone has information in regards to the 2 BADI´s for SAP Claim Management Reporting.
    - Business Add-In: Data Change in 'Claim Overview' Report
      CLAIM_REPORT_ADD_1
    - Business Add-In: Data Change in 'Claim Hierarchy' Report
      CLAIM_REPORT_ADD_2
    How to implement and what benefits do these BADI´s provide ?
    Thanks

    Hi,
    This is what the documentation for the BADI says,
    1) Business Add-In: Data Change in 'Claim Overview' Report - CLAIM_REPORT_ADD_1
    Use
    With this enhancement you can change data in the claim report 'Claim Overview'.
    Do not change the key QMNUM in the transfer table pt_qmel.
    Requirements
    If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM001 you must first add these additional columns to the structure RCLAIM001.
    2) Business Add-In: Data Change in 'Claim Hierarchy' Report - CLAIM_REPORT_ADD_2
    Use
    With this enhancement you can change data for the claim report 'Claim Hierarchy'.
    Do not change the key fields QMNUM, MANUM and OBJNR in the transfer table pt_qmel.
    Requirements
    If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM002 you must first add these additional columns to the structure RCLAIM002.
    It would be better if you could get in touch with your ABAP guys to know about how to implement these BADI's
    Regards,
    Gokul

Maybe you are looking for