Standard web template doesn't work

Hi,
I am currently experiencing difficulties when executing query from query designer and using Java web from RSRT.
I get this error message  The Web template "WEB_TEST" does not exist in the master system every time.
The web template "WEB_TEST" shouldn't exist in BI 7 because it belongs to BW 3.X and I don't know why I keep on getting this error message.
I have set the standard web template from RSCUSTV27 to 0ANALYSIS_PATTERN and even make the fields empty but I still get the error message.
If I use RSCUSTV21 and change the settings  I can easily see the result.
Can someone tell me why I can still get this error message and where can I set my default web template because SPRO settings doesn't work
thanks

Hi,
Default template 0Analysis_pattern wasn't changed or edited and I have installed it from Business content again and changed the settings from RSCUSTV27.
I think the settings that points to default template in Java web has changed. and I don't know if this was done in portal side or BI.
I can easily change the template settings back and front in ABAP Web (RSCUSTV21) and it works just fine.change
I made a work around solution by copying 0Analysis_pattern and renaming it to "WEB_TEST" template and Java web works properly.
so settings is pointing to WEB_TEST template and this template doesn't exist in the new BI. Its in BW 3.X
thanks

Similar Messages

  • WAD, execution of Web Template doesn't work

    HI,
    I have a problem with Web Template created with Web Application Designer.
    If I publish webtemplates to the portal,
    it works correctly, I can see my webtemplate on the portal.
    if I execute it from Web Application Designer,
    I see only a general report with buttons for: New Analysis, Open, Save as, Display as, etc...
    but not my webtemplate.
    I tried to execute many different webtemplates (custom and standard) but I saw always the same thing!
    I don't know why, but the results are the same for:
         ....2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=myWebTemplate
         ....2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=StandardTemplate
    and also if the link to the portal is like these:
         ....2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=
         ....2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?
    Can anyone help me?
    Thanks in advanced
    Fede

    I resolved my problem!
    In the Content Administration of the portal:
    -Portal Content
    --Content Provided by SAP
    ---Platform Add-Ons
    Business Intelligence
    iViews
    BEx Web... right click, Open -> Object
    I've deleted the value in the property "BEx Web Application Query String", I put in it nothing.
    Now, it works!
    Bye
    Federico

  • Hiding buttons in the standard web template based on roles

    Hi,
    In the standard web template, the requirement is to hide few buttons based on the authorization.
    Can this be achieved by assigning the roles? If not what is the work around?
    Regards
    Narayana

    Narayana,
    Restricting the Buttons is not feasible thru Role restrictions, you need to work around with the WAD..
    Action Events with Btn Clck.
    Cheer's
    HVR.

  • How to define a standard web template for a specific group of queries?

    Hello experts,
    I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
    Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
    Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
    Thanks in advance,
    Helder

    I have figured out how to  slice it up myself,  however it appears as though I have to do it all  manually, drawing  each box myself.
    Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
    This will result in either ALLOT of  work making sure  that each box is perfectly aligned with the one before  it, or uneven  slices.
    I am obviously doing something wrong.
    Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
    As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
    Mylenium

  • To copy standard web template

    Hi guys,
    i need to modify a standard web template,
    how do i copy as i was told not to touch
    the original, so that it becomes my default,
    help me out guys,
    Thanks

    Hi:
    This workes for me:
    In BW, run transaction:
    SE38
    COpy program 'RS_TEMPLATE_MAINTAIN'.
    Execute the program.
    In the next screen, you will see two drop-down boxes.
    1) Technical Name of a Template
    Here, select 0ADHOC
    Again Execute
    In the new screen, select the third Icon - Copy As.
    Give New Name. Make sure its not there before, so gicve something like Z0ADHOC1, etc.
    You are done.
    Open WAS and select Open Web  Template.
    THere, you will either see the new one in History or do a seach with the name that you just gave.
    Ram C.

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • What is the STANDARD Web Template in BI 7.0?

    Hello guys,
    Do you know what is the Standard Web Template in BI 7.0?
    Today we only use Workbooks and the java is already installed.
    Do we have to do some configuration in this Web template for our first execution?
    Thank you,
    Carlos Edaurdo

    Hi,
      0ANALYSIS_PATTERN is the standard Web template for the BI Queries when executed through Web.
      We can copy this template to a Ztemplate and make the changes necessory based on project need and can be assigned
      as default  in Configuration settings .
    Thanks,
    Prakash

  • In which DB table standard Web Templates located and also HTML code

    Hi gurus,
    Please help me on locaton of Standard Web Templates in DB table and how can I see the HTML code in WAD. Thanks in advance and I will assign points.
    Kaveri

    Hi,
    check the following link :
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
    1. open the web application designer
    2. left side u'll be seeing the applications like Table, dropwdown box , check box etc
    3.usually u drag and drop the application from left to right side--> once u dropped it u'll see 3 tabs at the bottom in that one of the Tab is HTML just click on it, it will lead u to the coding part.

  • Standard Web Template

    We are using Portal and BI for Netweaver 2004s. 
    We want to create our own Web Application Template to be used for Ad-hoc analysis.  We have created the template in the WAD and named it "ZZ_0ANALYSIS_PATTERN_T001".
    We have entered this Template name into the IMG for "Set Standard Web Template" in the field for Ad-hoc Analysis(TCODE RSCUSTV27)
    I expect that whenever I use the BEx Web Analyzer iView that this template would appear.  Instead whenever I preview this iView the "0ANALYSIS_PATTERN" Web Application Template is displayed.  I also have found that the "0ANALYSIS_PATTERN" Template is used if we click on "BEx Web Analyzer" from the Business Explorer Workset.
    FYI - I have SAPALL on the BI system and in the Portal: bi_showcase, business_explorer_showcase,business_planning_showcase

    Hi Heike,
    Could you please guide me through how I'd go about changing the template used in iView ?
    I'm getting an error:  "<i>Web template error in specifications for the Web item report  Parameter REPORT for the Report Web item in the Web template is empty or missing</i> " [and it's using 0REPORT_DEFAULT_TEMPLATE] when I execute a query from Query Designer... from what I'm understanding is that perhaps the iView template is using 0REPORT_DEFAULT_Template even though my SPRO setting is set to 0ANALYSIS_PATTERN for AdHoc.
    Thank you!
    Fionna

  • Header links in the web template is not working

    Hi all,
    I have a created webtemplete in that, header links in the web template is not working. But individually header links. I am not why they are not working in webtemplete.
    guys please help for above situation.
    Thanks,
    James

    Hi Bob,
    There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
    For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
    Please make sure that all the references are updated in the manifest file.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • Smart Web Printing doesn't work in IE9

    Smart Web Printing doesn't work in IE9...
    This question was solved.
    View Solution.

    IE9 has not yet been released in final form, it is still in Beta.  I do not know if HP has any plans to support the Web Printing application on IE9, but if they do I would not expect them to release anything before the official IE9 release.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Set standard web template

    Hello,
    We are trying to change the standard web template to a web template we developed in the WAD.
    In transaction RSCUSTV27 we put the WAD technical name in the field Ad hoc analysis (=TMPLID_BCAST) but when I run ad-hoc report I'm still getting the standard template (0analysis_pattern)
    Please Advice,
    Amir

    Once you set the default template  you need to restart the J2EE Engineen to get the effect.
    thanks.
    Wond

  • Activation of Standard Web Template

    Can anybody tell me what I need to do to activate the standard web template?
    I have defined 0ADHOC as my web template in RSCUSTV21, but none of the template contents are displayed in my web applications.

    Hi Stuart,
    The standard web template comes into play when you publish the query to the web either form the query designer or from the BEx Analyzer. At this time, the results are embedded in this standard template. IS this what you are trying to do? If you create your own web template in the WAD, then you need to start from the scratch and build it up with the web items you require. The standard web template is not used by default for any web applications that you may create.
    Hope this helps...please post back if I have misunderstood your requirement.

  • My web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple :)

    my web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple

    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

Maybe you are looking for

  • Adobe reader 9.1 has encountered a problem and needs to close

    How many other ADOBE subscribers have suffered the same frustrations as we have? Over the last 4 days and numerous hours of frustration installing and uninstalling ADOBE 9.1 [and 7.1 and 8.1.3] to resolve the unknown cause of the current Adobe messag

  • Is there ever to be .vcs/.ics support?

    I get many appointment notifications via email, my business relies on it. With the email is a .vcs (vCal) attachment containing all the relevant information. Also attached is a .vcf (vCard) file with customer contact info. iPhone Mail app opens impor

  • Problem with only being able to connect one computer wirelessly at a time.

    Can anyone help me? I have a WRT110. Here is what happens, say computer 1 is connected wirelessly to the internet then computer 2 gets turned on and trys to connect wirelessly, then computer one will get kicked off of the internet.

  • Is there a quick way to change audio hardware output?

    Hello, I have a Focusrite Scarlett 2i2 USB audio interface hooked up to my Windows 8 machine. I use it to record vocals in a sound booth. The sound booth is closed off from access to the computer, so I monitor my recordings throught the headphones co

  • Does readLine return null at end of file?

    My program is reading lines from a file in groups of 5. I want it to stop reading when it has reached the end of the file. Does readLine return null when there are no more lines or is there another way to end a loop like this? Thanks! try { String a,