Standby Server from CaminoSoft

Anyone use this? The product almost seems too good to be true as far as having a hot, off site spare. Looking for a reliable way to maintain a hot offsite spare for redundancy. We have a Fiber line running to a building several miles away that could be used as the link. Just wanting opinions. Thanks.

While I've never personally used it, it's been around for a long time, appears to work as advertised, and I've recommended it to many people with no negative feedback.
You do realise that it normally runs as a server in its own right, and when called into action that server disappears as it takes over the role of the failed server?

Similar Messages

  • UCCX 8.0 SNMP notification to report failover from active to the standby server?

    Does any know the UCCX 8.0 SNMP notification to report failover from active to the standby server?  (The specific notification.)
    ftp://ftp.cisco.com/pub/mibs/v2/CISCO-VOICE-APPS-MIB.my
    I see this in the MIB.
    cvaModuleStart NOTIFICATION-TYPE
      OBJECTS   { cvaAlarmSeverity, cvaModuleName }
      STATUS    current
      DESCRIPTION
            "A cvaModuleStart notification signifies that an
            application module or subsystem has successfully
            started and transitioned into in-service state. 
            This notification is working in conjunction with
            the cvaModuleStop notification to notify the start
            and stop status of a particular application module."
      ::= {ciscoVoiceAppsMIBNotifications 1}

    Attached are two files:
    cad-ecc-viewer.html
    This is a template HTML document which dictates how the pop up will look and what data fields are available.
    cad-ecc-viewer.vbs
    This is the Windows Scripting Host file which you run from a CDA workflow, and you pass it the values of the call data, it then launches an instance of IE and loads the above template.
    By default the code is setup to use the following data from the call, but can be modified to work with more, less, or different data:
    Customer Name
    Customer Status (like Premium, or Platinum)
    Customer Number (like an account number)
    Customer Phone Number
    So when you specify the VBS file to run in CDA you need to pass those variables in that order.
    The CDA should expect the VBS file on the root of C:\ by default, and the VBS file expects the HTML Template on the root of C:\ also.
    I have only tested this on UCCX 7x and IE 8x.  Use the code as a guide to your own solution, that suites your business requirements.
    EDIT: I see that this does not work on my Win7/IE9 system, so I will spend some time updating the code for Win7/IE9 and I'll let you know how it goes.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Procedure to delete archive log from standby server

    Hi
    We are using oracle10g(10.2.0.3) and we configured dataguard .
    I want to know procedure to delete applied archive log from standby server?
    Thanks
    With Regards
    umair

    [Delete Applied Archivelogs on Standby Database |http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html]
    http://tinyurl.com/p2krga
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Issue in configuring Standby Database from Active database in 11g by RMAN

    POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.
    Edited by: 895188 on Dec 21, 2012 5:50 PM
    Edited by: 895188 on Dec 21, 2012 6:09 PM
    Edited by: 895188 on Dec 21, 2012 6:22 PM

    Hello;
    Script has to be run from auxiliary.
    Great details, but what I don't see is how you connect in RMAN.
    Example
    Start RMAN
    $ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: RECOVER2 (DBID=3806912436)
    connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
    Generally for active duplication I start the future standby on a pfile NOMOUNT.
    Auxiliary Instance Initialization Parameters Needed :
    DB_NAME
    CONTROL_FILES
    DB_BLOCK_SIZE
    ( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
    Then start RMAN and finally run a single line duplication command.
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
    mseberg

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Got error when creating a standby DB from rman:  no backup or copy... Why?

    We try to create standby database from a production DB on another server (10.2.0.4). The RMAN backup is in the nfs file system which is also mounted to the target server (the DR box). So, the access path for the rman backup is the same look from primary DB server and DR DB server. I started the RMAN run:
    RMAN> RUN
    2> {
    3> ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
    4> ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
    5> DUPLICATE TARGET DATABASE for standby
    6> nofilenamecheck
    7> dorecover;
    8> }
    9>
    10> exit
    using target database control file instead of recovery catalog
    allocated channel: aux1
    channel aux1: sid=582 devtype=DISK
    allocated channel: aux2
    channel aux2: sid=584 devtype=DISK
    Starting Duplicate Db at 21-JUN-12
    contents of Memory Script:
    set until scn 12198261770353;
    restore clone standby controlfile;
    sql clone 'alter database mount standby database';
    executing Memory Script
    executing command: SET until clause
    Starting restore at 21-JUN-12
    released channel: aux1
    released channel: aux2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 06/21/2012 16:33:36
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    ===========================================================================
    The backups should have controlfile. There is rman show all display:
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    CONFIGURE BACKUP OPTIMIZATION OFF;
    CONFIGURE DEFAULT DEVICE TYPE TO DISK;
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/inbound/online/controlfile_auto%F';
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
    CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/backup/inbound/online/%d_%T_%t_%s';
    CONFIGURE MAXSETSIZE TO UNLIMITED;
    CONFIGURE ENCRYPTION FOR DATABASE OFF;
    CONFIGURE ENCRYPTION ALGORITHM 'AES128';
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/backup/inbound/online/snapcf_inbound.f';
    Why and how to fix? Thanks for help!

    Here is the list of command:
    RMAN> list backup of controlfile ;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    5518 Full 4.57M DISK 00:00:07 17-JUN-12
    BP Key: 5518 Status: AVAILABLE Compressed: NO Tag: TAG20120617T035926
    Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120617-00
    Control File Included: Ckp SCN: 12197994840698 Ckp time: 17-JUN-12
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    5522 Full 4.57M DISK 00:00:00 18-JUN-12
    BP Key: 5522 Status: AVAILABLE Compressed: NO Tag: TAG20120618T010158
    Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120618-00
    Control File Included: Ckp SCN: 12198041382572 Ckp time: 18-JUN-12
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    5526 Full 4.57M DISK 00:00:01 19-JUN-12
    BP Key: 5526 Status: AVAILABLE Compressed: NO Tag: TAG20120619T010352
    Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120619-00
    Control File Included: Ckp SCN: 12198090424606 Ckp time: 19-JUN-12
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    5530 Full 4.57M DISK 00:00:02 20-JUN-12
    BP Key: 5530 Status: AVAILABLE Compressed: NO Tag: TAG20120620T010304
    Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120620-00
    Control File Included: Ckp SCN: 12198146424201 Ckp time: 20-JUN-12
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    5534 Full 4.57M DISK 00:00:02 21-JUN-12
    BP Key: 5534 Status: AVAILABLE Compressed: NO Tag: TAG20120621T010357
    Piece Name: /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
    Control File Included: Ckp SCN: 12198210334547 Ckp time: 21-JUN-12
    ==================================================================
    I tried to catalog the controlfile:
    RMAN> catalog controlfilecopy '/backup/inbound/online/controlfile_autoc-2080040856-20120621-00';
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of catalog command on default channel at 06/21/2012 17:24:32
    ORA-19563: control file header validation failed for file /backup/inbound/online/controlfile_autoc-2080040856-20120621-00
    ====================================================================
    We have level 1 backup everyday, except Sunday. I have level 0 backup on Sunday. I alos tried the metalink note RMAN Duplicate For Standby Fails with Rman-06024: No Backup Or Copy Of The Control File Found To Restore [ID 466321.1]. It does not work.
    Thanks for help!

  • Updating standby database from primary using rman

    I have created a standby database using rman on my oracle linux server, now i want to update the standby from my primary database, but i didn't remember the scn which i used for creating the standby. How can i find out the scn from where i should perform the incremental backup on the primary, so that i can update my standby database with the latest information.

    You simply need to find out which logs on the Primary have yet to be applied to your Standby. Have a look at this (or any Oracle Data Guard docs.): http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10823/manage_ps.htm#1024046
    As long as the logs are available on the Primary server, then they should be sent across to the Standby server. Use the views described in the above link to check for any gaps, etc.

  • Standby database from RMAN backup

    I have been assigned to create a standby database from our RMAN backups in a different machine, as this is my first attempt at recovering, I am struggling a bit. I would appreciate if someone can throw any light on what dumb mistakeI am doing here. I ahve absolutely no control over the back up script which is done by my vendor, but can do anything in the reocvery portion. I did try going through the documentaiton and other help available for the last 2 days.
    Database : Oracle 10G R2
    OS : Windows Server 2003
    My backup script is
    configure channel device type disk format 'J:\RMAN\RMAN_df_%U' maxpiecesize 2048M;
    SQL "ALTER SYSTEM SWITCH LOGFILE";
    SQL "ALTER SYSTEM SWITCH LOGFILE";
    backup database;
    SQL "ALTER SYSTEM SWITCH LOGFILE";
    SQL "ALTER SYSTEM SWITCH LOGFILE";
    backup current controlfile for standby FORMAT='J:\RMAN\RMAN_sc_%U';
    For recovery of a standby database,
    I have copied the the back up pieces and the archive logs to the standby server where I have just created an instance with the same name as production db.
    set ORACLE_SID=NGINPROD
    set dbid 820336652
    STARTUP NOMOUNT
    RESTORE STANDBY CONTROLFILE FROM 'I:\TEMP\RMAN_Backup\RMAN\RMAN_SC_2UMIUJM1_1_1';
    CATALOG BACKUPPIECE 'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_1_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_2_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_3_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_4_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_5_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_6_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2RMIUIE4_7_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_1_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_2_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_3_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2SMIUJ88_4_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_DF_2TMIUJLN_1_1',
    'I:\TEMP\RMAN_Backup\RMAN\RMAN_SC_2UMIUJM1_1_1';
    RESTORE DATABASE;
    Till this step I do not encounter any issues, but when i try to recover the database I am hit with the below error.
    RMAN> recover database;
    Starting recover at 16-AUG-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    starting media recovery
    unable to find archive log
    archive log thread=1 sequence=253340
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 08/16/2011 09:31:57
    RMAN-06054: media recovery requesting unknown log: thread 1 seq 253340 lowscn 4696173517
    ------------------------------------------------------------------------------------------------------------------------------------------------

    Here's the standard dcoumentation on the procedure :
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377
    Appendix "F Creating a Standby Database with Recovery Manager" of the "Oracle® Data Guard Concepts and Administration" guide.
    I don't see ArchiveLog backups being done by the vendor's script. How do you backup the ArchiveLogs ?
    In your post you state that you have copied the ArchiveLogs. Are they copied to the same log_archive_dest location ? RMAN needs to be "aware" of them. You can use the "CATALOG" command in RMAN to register them into the controlfile.
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230
    A Standby Database uses a Standby Controlfile which is created from the Primary (with the "ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'locaion';" command) and then copied over to the Standby server.
    Hemant K Chitale

  • How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

    Hi,
    Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
    DB : 11.2.0.2
    OS : RHEL5
    RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
    Thanks in Advance..

    Hi;
    Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
    DB : 11.2.0.2
    OS : RHEL5I had similar issue, what i did
    1. Used source oracle_home on standby server
    2. Created new asm instance and use same naming
    3. I took RMAN full backup on source and move it to target
    4. I edit initora file remove RAC setting and restore db(also edited listener file)
    Regard
    Helios

  • Will RMAN delete archive log files on a Standby server?

    Environment:
    Oracle 11.2.0.3 EE on Solaris 10.5
    I am currently NOT using an RMAN repository (coming soon).
    I have a Primary database sending log files to a Standby.
    My Retention Policy is set to 'RECOVERY WINDOW OF 8 DAYS'.
    Question: Will RMAN delete the archive log files on the Standby server after they become obsolete based on the Retention Policy or do I need to remove them manually via O/S command?
    Does the fact that I'm NOT using an RMAN Repository at the moment make a difference?
    Couldn't find the answer in the docs.
    Thanks very much!!
    -gary

    Hello again Gary;
    Sorry for the delay.
    Why is what you suggested better?
    No, its not better, but I prefer to manage the archive. This method works, period.
    Does that fact (running a backup every 4 hours) make my archivelog deletion policy irrelevant?
    No. The policy is important.
    Having the Primary set to :
    CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBYBut set to "NONE" on the Standby.
    Means the worst thing that can happen is RMAN will bark when you try to delete something. ( this is a good thing )
    How do I prevent the archive backup process from backing up an archive log file before it gets shipped to the standby?
    Should be a non-issue, the archive does not move, the REDO is transported and applied. There's SQL to monitor both ( Transport and Apply )
    For Data Guard I would consider getting a copy of
    "Oracle Data Guard 11g Handbook" - Larry Carpenter (AKA Dr. Paranoid ) ISBN 978-0-07-162111-2
    Best Oracle book I've read in 10 years. Covers a ton of ground clearly.
    Also Data Guard forum here :
    Data Guard
    Best Regards
    mseberg
    Edited by: mseberg on Apr 10, 2012 4:39 PM

  • Logical standby server stopped applying changes

    Hi
    I set up a logical standby database with database guard and it worked fine for some time. But recently I had to use it again and discovered that applying changes from primary database to secondary database just stopped working. I see in V$ARCHIVED_LOG one entry per day. If I restart the logical standby then the changes from primary server are also applied. But if I just make a change on primary server and even call 'alter system switch logfile' then I see an entry in V$ARCHIVED_LOG on primary server but not on standby server (BTW in general there are much more entries in this view on the primary server). I checked pairs of log files indicated by the parameter *.log_file_name_convert in standby server's spfile: their last changed date is always the same.
    I will paste spfile of my standby server (dh5). Primary server name is dh2.
    dh2.__db_cache_size=79691776
    dh5.__db_cache_size=96468992
    dh2.__java_pool_size=4194304
    dh5.__java_pool_size=4194304
    dh2.__large_pool_size=4194304
    dh5.__large_pool_size=4194304
    dh2.__shared_pool_size=71303168
    dh5.__shared_pool_size=54525952
    dh2.__streams_pool_size=0
    dh5.__streams_pool_size=0
    *.audit_file_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/adump'
    *.background_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5/control01.ctl'
    *.core_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='dh2','dh5'
    *.db_name='dh7'
    *.db_recovery_file_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.db_unique_name='dh5'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=dh2XDB)'
    *.fal_client='dh5'
    *.fal_server='dh2'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(dh2,dh5)'
    *.log_archive_dest_1='LOCATION=/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5_local
    VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)
    DB_UNIQUE_NAME=dh5'
    *.log_archive_dest_2='SERVICE=dh2 LGWR ASYNC
    VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
    DB_UNIQUE_NAME=dh2'
    *.log_archive_dest_3='LOCATION=/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5
    VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLES)
    DB_UNIQUE_NAME=dh5'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_dest_state_3='ENABLE'
    *.log_archive_format='%t_%s_%r.arc'
    *.log_archive_max_processes=30
    *.log_file_name_convert='oradata/dh2/redo01.log','flash_recovery_area/DH5/onlinelog/o1_mf_4_5x0o5grc_.log','oradata/dh2/r
    edo02.log','flash_recovery_area/DH5/onlinelog/o1_mf_5_5x0o61mw_.log','oradata/dh2/redo03.log','flash_recovery_area/DH5/on
    linelog/o1_mf_6_5x0o63gj_.log'
    *.nls_language='AMERICAN'
    *.open_cursors=300
    *.pga_aggregate_target=311427072
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.undo_management='AUTO'
    *.undo_retention=3600
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/udump'
    Thanks in advance for any help.
    JM

    Hi,
    Nice to hear you issue got resolved.
    It is good practice to keep monitoring the progress of SQL apply on the logical standby on a regular basis.
    You can mark my response as helpful if it has helped you.
    Regards
    Anudeep

  • How to create standby controlfile from restored backup

    Hi Techies,
    I am re-building one of my DR server, Source and target DB is oracle 10g.
    I have taken the source backup which is going to be restored on target, But I forgot to take a standby controlfile from source DB at the time (Pre/Post) backup.
    Now the issue is I can create a standby controlfile on primary and copy the same to target, But so many datafiles are added after the backup which I have taken to restore and medias are already shipped.
    I can send the other set of backup to DR site, but it takes a week time and I don't want to do that If I can regenerate it.
    So any clue to create standby controlfile on target with restored datafiles?
    Regards,
    Nick Loy

    Hmm... sounds like you perform this in a rather manual fashion...
    Do you use RMAN for taking the backups?
    Or maybe the BR*TOOLS?
    With these tools you are usually safe from such mistakes - I can only recommend to use them!
    However, since you don't have a control file at all on the target side, the only thing left to do would be to
    ALTER DATABASE BACKUP CONTROLFILE TO TRACE NORESETLOGS;
    on the primary side and manually remove the files that have been added since you took the backup from the control file script,
    Afterwards you use the script on the standby side to create the control files.
    regards,
    Lars

  • Standby server - WAIT_FOR_GAP error

    Hi,
    I have a Oracle Dataguard 10.2 running on Windows and found a WAIT_FOR_GAP error on the standby server.
    --> alert log of standby
    Sun Jan 30 20:00:04 2011
    ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
    MRP0 started with pid=18, OS id=2452
    Managed Standby Recovery not using Real Time Apply
    parallel recovery started with 3 processes
    Sun Jan 30 20:00:13 2011
    Waiting for all non-current ORLs to be archived...
    Clearing online redo logfile 10 E:\ORACLE\A30\ORIGLOGA\LOG_G10_M1.DBF
    Clearing online log 10 of thread 1 sequence number 17848
    Sun Jan 30 20:00:13 2011
    Errors in file z:\oracle\a30\saptrace\background\a30_mrp0_2452.trc:
    ORA-19527: physical standby redo log must be renamed
    ORA-00312: online log 10 thread 1: 'E:\ORACLE\A30\ORIGLOGA\LOG_G10_M1.DBF'
    Clearing online redo logfile 10 complete
    Media Recovery Log L:\ORACLE\A30\ORAARCH\A30ARCH\ARC17856_0681431456.001
    Sun Jan 30 20:00:13 2011
    Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
    Sun Jan 30 20:00:33 2011
    Media Recovery Waiting for thread 1 sequence 17857
    Sun Jan 30 20:51:19 2011
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[636]: Assigned to RFS process 4976
    RFS[636]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    Sun Jan 30 20:51:20 2011
    Fetching gap sequence in thread 1, gap sequence 17857-17863
    Sun Jan 30 20:51:20 2011
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[637]: Assigned to RFS process 4012
    RFS[637]: Identified database type as 'physical standby'
    Sun Jan 30 20:52:20 2011
    RFS[637]: Archived Log: 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC17864_0681431456.001'
    Sun Jan 30 20:56:34 2011
    FAL[client]: Failed to request gap sequence
    GAP - thread 1 sequence 17857-17863
    DBID 3371425568 branch 681431456
    FAL[client]: All defined FAL servers have been attempted.
    Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
    parameter is defined to a value that is sufficiently large
    enough to maintain adequate log switch information to resolve
    archivelog gaps.
    Sun Jan 30 22:00:44 2011
    RFS[636]: Archived Log: 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC17865_0681431456.001'
    Primary database is in MAXIMUM PERFORMANCE mode
    SQL> select process,sequence#,status from v$managed_standby;
    PROCESS    SEQUENCE# STATUS
    ARCH               0 CONNECTED
    ARCH               0 CONNECTED
    MRP0           17857 WAIT_FOR_GAP
    RFS                0 IDLE
    RFS                0 IDLE
    RFS                0 IDLE
    SQL> select * from v$archive_gap;
       THREAD# LOW_SEQUENCE# HIGH_SEQUENCE#
             1         17857          17863
    SQL> select sequence#,applied from v$archived_log order by sequence#;
    SEQUENCE# APP
         17855 YES
         17856 YES <--- Gap here
         17864 NO
         17865 NO
         17866 NO
         17867 NO
         17868 NO
         17869 NO
         17870 NO
         17871 NO
         17872 NO
    SEQUENCE# APP
         17873 NO
         17874 NO
         17875 NO
         17876 NO
         17877 NO
         17878 NO
         17879 NO <--- Gap here
         17889 NO
         17890 NO
         17891 NO
         17892 NO
    SEQUENCE# APP
         18067 NO
         18068 NO
         18069 NO
         18070 NO
         18071 NO
         18072 NO
    4032 rows selected.
    --> alert log of primary
    Sun Jan 30 20:00:03 2011
    Incremental checkpoint up to RBA [0x45c8.1f6c6.0], current log tail at RBA [0x45c8.1f7f5.0]
    Sun Jan 30 20:05:04 2011
    ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
    Sun Jan 30 20:30:11 2011
    Incremental checkpoint up to RBA [0x45c8.201e2.0], current log tail at RBA [0x45c8.20215.0]
    Sun Jan 30 20:51:12 2011
    Destination LOG_ARCHIVE_DEST_2 is UNSYNCHRONIZED
    LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
    LNSb started with pid=50, OS id=1792
    Sun Jan 30 20:51:19 2011
    Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
    Beginning log switch checkpoint up to RBA [0x45c9.2.10], SCN: 276988485
    Sun Jan 30 20:51:20 2011
    Thread 1 advanced to log sequence 17865 (LGWR switch)
      Current log# 17 seq# 17865 mem# 0: F:\ORACLE\A30\ORIGLOGB\LOG_G17_M1.DBF
      Current log# 17 seq# 17865 mem# 1: E:\ORACLE\A30\MIRRLOGB\LOG_G17_M2.DBF
    Sun Jan 30 20:51:20 2011
    ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
    Sun Jan 30 20:51:25 2011
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    Sun Jan 30 20:56:35 2011
    Completed checkpoint up to RBA [0x45c9.2.10], SCN: 276988485

    Hi,
    I've seen that, if the following message persists for a long time, then it is an ERROR.
    FAL[client]: Failed to request gap sequence GAP - thread 1 sequence 17857-17863 DBID 3371425568 branch 681431456 FAL[client]: All defined FAL servers have been attempted.
    The possibility is that log shipping of 17857 is stuck. It is not stuck because of any network disconnect, as it is in the case you mentioned. It is probably due to the following.
    The parameter LOG_ARCHIVE_DEST_1 on standby is set as L:\ORACLE\A30\ORAARCH\A30ARCH\ARC and STANDBY_ARCHIVE_DEST is also set to L:\ORACLE\A30\ORAARCH\A30ARCH\ARC. When a GAP is identified, standby database tries to pull the missing files FROM PRIMARY, and the in turn when you enable standby destination on primary (log_archive_dest_state_2 = enabled), it starts shipping logfiles on its OWN.
    When such a situation occurs in a system when archived logs are generated at a high rate, it can happen that the file which standby is trying to pull is being pushed/already pushed by primary database. Then a conflict arise, and standby deletes the file and tries to pull it again...this may go on in a loop. (because the locations are SAME).
    When i had this issue, I maintained different locations for  LOG_ARCHIVE_DEST_1 and STANDBY_ARCHIVE_DEST on standby database. After this is done, you will find that the logs shipped by primary are written in STANDBY_ARCHIVE_DEST. The file written in this location will be used by the standby database only when you do a managed recovery. If you are doing a manual recovery by issuing the command RECOVER STANDBY DATABASE; then, the stanbdby database will check if the file exists in LOG_ARCHIVE_DEST_1.
    The point is, when there is BIG gap, then you have the option of doing the following procedure.
    1. On the primary database keep LOG_ARCHIVE DESTSTATE_2 = enable
    2. On the standby ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL.
    3. Copy the missing archive logs sequence from the primary to standby's LOG_ARCHIVE_DEST_1 and perform manual recovery on standby untill the gap is over.
    4. issue the command ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT to start managed recovery. ( This will use the files present in STANDBY_ARCHIVE_DEST ).
    Hope the above procedure helps.
    Note: If the GAP is not that big and you see that last applied log is advancing, then conflict is not there...standby will automatically fill the GAP. But it is advised to maintain different location for the parameters i mentioned.
    Regards,
    Anish
    Edited by: Mohammed Anish on Feb 10, 2011 6:48 AM

  • Error in standby server

    The standby server not receiving archivelogs continuesly . Scenario : in 10 files transmission,database transmitting only 7 or 8 files. remaining files i am copying maunally & then resolving the gap sequence .when i see alert log file in standby server I am geting an error like follows.what should i do?
    FAL[client]: Failed to request gap sequence
    GAP - thread 1 sequence 152366-152366
    DBID 3500755944 branch 694072247
    FAL[client]: All defined FAL servers have been attempted.
    Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
    parameter is defined to a value that is sufficiently large
    enough to maintain adequate log switch information to resolve
    archivelog gaps.
    -------------------------------------------------------------

    Post Operating System (OS) name & version for DB server system.
    Post results of
    SELECT * from v$version
    What clues exist in alert_SID.log file on Primary?

  • Why FRA filling faster in logical standby server.

    I have two standby servers one physical and one logical for my primary database. I have notice that on logical standby server the FRA is filling faster then physical standby server. Any one have some suggestions.
    Thx

    >
    I have two standby servers one physical and one logical for my primary database. I have notice that on logical standby server the FRA is filling faster then physical standby server. Any one have some suggestions.
    >
    That is to be expected, because the logical standby not only creates archive logs on behalf of the transmission from the primary but also generates its own archivelogs on behalf of the filling (& archiving) of the local online logfiles. If you watch a logical standby applying, you may notice that the standby logs are getting archived and the online logs as well. That is significant for a logical standby and leads to (at least temporary) higher space consumption in the recovery area. Temporary, because the applied archive logs can get deleted (automatically, if you allow that).
    Kind regards
    Uwe
    http://uhesse.wordpress.com

Maybe you are looking for

  • Number of users per room limit = 5000

    Hello, Regarding the 5000 users limit per room in LCCS: Is it an automatic limitation, or is there a way to over pass this limit? And why do you apply this limit? In a previous discussion, i was answered: "ideally if you want to build a really scalab

  • I got this problem when i include one more file in my jsp within if conditi

    i got the following error The server encountered an internal error () that prevented it from fulfilling this request. exception org.apache.jasper.JasperException: Unable to compile class for JSP: Stacktrace:      org.apache.jasper.compiler.DefaultErr

  • HT1229 How to save photos (iPhoto) on external HD, delete on internal HD

    To make room on my internal hard drive, I want to save my iPhoto library on external hard drive and delete some events from my internal hard drive. I don't want to lose them on the external hard drive too.  Is this possible?

  • HELP- Windowed mode for call of duty 4

    Hi. I've just brought call of duty 4 for my imac i5. Does anyone know how i can play this in a windowed mode so i can still do other things on my desktop at the same time. i've tried the command-d like someone else suggested and that doesn't work. Th

  • Upgraded to iTunes 10.5, reinstalled Windows 7, music is missing

    Hi. My PC crashed when I was atempting to backup iTunes and my Documents and I had to reinstall Windows 7 and upgrade to iTunes 10.5. All my music is now missing. I do not have a backup since that was the source of the crash. Thanks for your help. Ch