Start JCoIDoc.Server within SAP WAS
Hello,
is it possible to start an JCoIDoc.Server in the SAP WAS Server? I´ try to start this server within a WebDynpro application to receive Idocs, only if the server is started. Or have you any best practice to do something like that?
Regards
Verena
Thanks for your help !!!!!!
Similar Messages
-
Publishing XI exposed webservices in the UDDI Server of SAP WAS JAVA 640
Hi Friends,
I have a question regarding publishing a WSDL created via XI (Integration Directory) to a UDDI Server of SAP WAS JAVA 640. Can I publish the WSDL generated from XI in the UDDI Server provided as a part of SAP WAS 640 ? I know that the WSDL will be specific for a client( sender) but I feel that its better than emailing the WSDL to the client after generating it in the integration directory. Any relevant documents, links explaining how to do that will be appreciated.
The above question was asked by Siva Maranani before. His question was as below .
"I know that whenever a webservice is developed using NDS it can be deployed in WebAs and the same can be registered in UDDI ( webAs acting as UDDI registry).
Now my requirement is to register a WSDL file (which describes) for an external webservice. Can WebAs be used as a UDDI registry..?
I like to know if this is possible or not..? if yes.. how..?"
Waiting for the reply...
Thanks & Regards,
MathewHi Naveen,
Thanks for the quick response. I tried the steps mentioned in the link.
1. Successfully created a new local UDDI registry in SAP WAS..
2. Assigned users etc.
The place I am getting stuck is..
"Make sure that the Web Service Definition has already been created and configured".
I have a WSDL document created via Define webservice in the XI integration directory.(We are successfully able to call the webservice using this WSDL via .net & xmlspy)
Where should I upload this WSDL ? so that the users will able to download/reference it w/out myself emailing to them.We dont/won't have NDS installed in our landscape.
I understand that whenever a webservice is developed using NDS it can be deployed in WebAs and the same can be registered in UDDI ( webAs acting as UDDI registry).
The requirement is to register a WSDL file generated via XI w/out using NDS.
Did you able to publish a WSDL file generated via XI in the local UDDI w/out using NDS ?
waiting for your reply
Thanks a lot,
Mathew -
Start weblogic server within java code
From edoc.bea.com, I got:
====
The following sections describe alternate ways to start an Administration Server:
Starting an Administration Server from the Windows Start Menu
Starting an Administration Server When the Host Computer Boots
Starting an Administration Server With the java weblogic.Server Command
====
Could we start weblogic server within java code?
(like ServerLoader provided by JBoss?)
Thanks in advance.
-KevinThe follwoing code:
//====
import weblogic.*;
public class MyTest
public static void main(String[] args)
String[] myArgs = new String[6];
myArgs[0] = "-Dweblogic.home=C:\\bea";
myArgs[1] = "-Dweblogic.RootDirectory=C:\\bea\\weblogic81\\samples\\domains\\examples";
myArgs[2] = "-Dweblogic.ConfigFile=C:\\bea\\weblogic81\\samples\\domains\\examples\\config.xml";
myArgs[3] = "-Dweblogic.Name=examplesServer";
myArgs[4] = "-Dweblogic.management.username=weblogic";
myArgs[5] = "-Dweblogic.management.password=weblogic";
Server.main( myArgs );
//====
Seems that did not feed the arguments in:
C:\myTest>java -cp .;%CLASSPATH% MyTest
<Sep 22, 2005 6:08:40 PM EDT> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server: -
Solved!!Error when starting HTTP Server
Hi againg
When restarting the HTTP Server I receive the following error
HTTP Server. Using Web Configuration View
JVM: Java Virtual Machine initialized
HTTP Server: Java Virtual Machine Loaded
DSAP Filter SAP Ticketcerifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only initializing
Cannot find NOTES.INI variable MySapDebug, Debug is turned off
Using NOTES.INI variable MySapPsePath = c:\domino\sap\verify.pse
Cannot find NOTES.INI variable mySapView. Using default settings:$Users
Cannot find NOTES.INI variable MySapSuppressEmptyTicketWarning. Default is used (warning messages are written to the log)
DSAP Filter SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only started
HTTP Server: DSAPI SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only Load successfully
Servlet engine initialization was successful
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
HTTP Server Started
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
SAP Ticketverifier: invalid ticket
Opened the NOTES.INI file and started to look for the variables of mySapView, and MySapSuppressEmptyTicketWarning, but they are not presented in this file
Need help to start looking for error
Regards
Kay-Arne
Message was edited by: Kay-Arne AarlieThere are several ways to do this, but for best results on a single installation (versus many), manually add and configure the following SAP TV variables in Notes.ini. Remember to leave a single blank line at the end of the file (a known issue with the last variable not being read):
<b>;===Custom Start===
MYSAPPSEPATH=<your path info goes here>\verify.pse
MySapDebug=<True or False>
MySAPVIEW=<the custom view name, if one is used>
MySapSuppressEmptyTicketWarning=<True or False>
;===Custom End===</b> -
OBIEE 11g- unable to start application server
Dear All,
I have recently installed OBIEE 11g 11.1.1.6.0 for the first time (enterprise install)
am able to login to anaytics page and create reports, but Iam not able to connect to enterprise manger , console.
Going through various posts, i came to know i should start Application server.
which i was not able to. was getting error as
'unable to get file lock will retry'.
I tried deleting
Navigate to the path : <OBIEE HOME>/C:\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp
“AdminServer.lok” file.
it still did not start
I try doing the same for “bi_server1″ lock file. but am not able to delete this file.
It says its in use. but i did not find any Java process running.
Can you please help. how can i start my Application server on windows OS.
Appreciate your help.
thanks in advance.
AchalaFirstly we have shutdown the application for OS activity for creating mount point(related to Business)
then we where trying to start the application all the work process are running with semaphore 50 , there no such error mesg ,just the work process are hang at running state with user SAPSYS
the i have shutdown the application and clean the ipc and again i restarted the app still the same issue
Hope u understand
Thank you
Haroon -
Can't start Application server
Hi,
When I am to start Application server within Jdev 11.1.1.4, I have got this
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
Exception in thread "main" Process exited.
What can be the reasons?
Regards,
Edited by: Hua Min on Feb 13, 2012 4:08 PMHi,
Check similar issue
java.lang.NoClassDefFoundError: weblogic/Server -
Unable to find SAP Server in SAP Management Console
Hi
I installed NSP Server in my Windows XP i used to work on this system.
I downloaded 90days licence from SAP site and it is valid upto 20060701.
Today we i try to start NSP Server using SAP Management Console there is server appearing in the tree which is usually appear in left panel.
Could any body help me how retrive the Server in SAP Management Console
Thanks
UmaHi uma
check the following service is running under windows service manager.
control panel->Administrative tool ->services
find the following service
sapnsp_instance number.
this service might be stop. start it.
also check the logon information for service.
now check the sap MMC.
regards,
kaushal -
How to start/ restart the service in visual admin of SAP WAS 6.4?
I have installed the sneak preview version of SAP NetWeaver WAS 6.4 for default Database MaxDB. While developing a simple application to manage simple database table citymaster with 2 columns in jsp I am getting error as
Exception e com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at : java.comp.
Looking at visual admin tool for WAS 6.4 all the entries are in color blue but the last entry for 'DATASOURCE' is in RED color where 'java.comp/env/JDBC/DATASOURCE' is the jndi reference created for default DataSource.
Can any one help me that why the last entry is in RED and it that say that some error has occured or that entry is not started then how to start that?
Please help....Dear Daniel,
I have checked the Visual Administrator's JNDI Registry service entry in the ejbContexts node but there is no entry for the project which I have created.
It get deployed while I right click on the project's ear file and click on "Deploy on J2EE Engine". But same as before while checking in Browserthe site gives the same error...
503 Service Unavailable
Application cannot be started!
Details: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application bcone.com/EntityCMPAppln cannot be started, because it has hard reference to resource CONFIG_DB with type javax.sql.DataSource, but it is not active on the server.
at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:508)
at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:149)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:285)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:355)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:120)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:224)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4170)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2390)
at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2267)
at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:101)
at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:80)
at com.sap.engine.core.thread.impl4.SingleThread.execute(SingleThread.java:70)
at com.sap.engine.core.thread.impl4.SingleThread.run(SingleThread.java:111)
Please help me, how to recover this error.
Rgds,
Vivek -
Which exe in SAP WAS 6.40 i need to execute to start J2EE engine
Hi
I am working on SAP WAS 6.40 SP9,
I need to start the J2EE not from the mmc (I know how to start the J2EE from MMC))but by invoking exe's.I was able to figure out that I need to invoke
C:\usr\sap\J2E\JC00\j2ee\os_libs\jcontrol.exe
with argument as
pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_[your_machine]
but when I execute the same on te command prompt the exe runs but when I use IE browser with URL "http://[your_machine]:50000/index.html" I dont get to see the index page
My work involves runing the SAP WAS 6.40 j2ee engine using ANT.I have to use ant tags to start,create deployment descriptors and deploy the ear.
I would be grateful If one can help me out
Thanks in advance
SaiHi Vladmir
Thanks for the advice
I saw the trace files and there was folwing exceptions :
#1.5#000FFE10EF3C00010000000000000CE00003F749651E606B#1116319531292#com.sap.engine.core.cluster.impl6.ms.MSRawConnection##com.sap.engine.core.cluster.impl6.ms.MSRawConnection.receiveRawMessage()#######SAP J2EE Engine|MS Socket Listener##0#0#Error##Plain###java.io.IOException: Error reading length field of message. EOF has been reached.#
#1.5#000FFE10EF3C00010000000100000CE00003F749651EB09B#1116319531308#com.sap.engine.core.cluster.impl6.ms.MSRawConnection##com.sap.engine.core.cluster.impl6.ms.MSRawConnection.receiveRawMessage()#######SAP J2EE Engine|MS Socket Listener##0#0#Error##Plain###java.io.IOException: Error reading length field of message. EOF has been reached.
at com.sap.engine.core.cluster.impl6.ms.MSMessageHeader.read(MSMessageHeader.java:441)
at com.sap.engine.core.cluster.impl6.ms.MSMessageObjectImpl.readHeader(MSMessageObjectImpl.java:141)
at com.sap.engine.core.cluster.impl6.ms.MSRawConnection.receiveRawMessage(MSRawConnection.java:1689)
at com.sap.engine.core.cluster.impl6.ms.MSListener.run(MSListener.java:87)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
#1.5#000FFE10EF3C00010000000300000CE00003F749651EB86A#1116319531323#com.sap.engine.core.cluster.impl6.ms.MSListener##com.sap.engine.core.cluster.impl6.ms.MSListener.run()#######SAP J2EE Engine|MS Socket Listener##0#0#Error#1#/System/Server#Java###.#1#MSLib: Exiting the listener loop. Cluster communication is not working anymore. This is due to an interrupted reconnect session. Node will reboot.#
#1.5#000FFE10EF3C00000000000700000CE00003F749651F2D03#1116319531355#com.sap.engine.core.cluster.impl6.ClusterManagerImpl##com.sap.engine.core.cluster.impl6.ClusterManagerImpl.init(java.util.Properties)#######Thread[Thread-1,5,main]##0#0#Fatal#1#/System/Network#Plain###Cannot attach to the Message Server. cluster Id is not unique.#
#1.5#000FFE10EF3C00000000000800000CE00003F749651F2EE8#1116319531355#com.sap.engine.core.cluster.impl6.ClusterManagerImpl##com.sap.engine.core.cluster.impl6.ClusterManagerImpl.init(java.util.Properties)#######Thread[Thread-1,5,main]##0#0#Fatal##Plain###com.sap.engine.frame.cluster.ClusterException: cluster Id is not unique.#
#1.5#000FFE10EF3C00000000000900000CE00003F749651F3066#1116319531355#com.sap.engine.core.cluster.impl6.ClusterManagerImpl##com.sap.engine.core.cluster.impl6.ClusterManagerImpl.init(java.util.Properties)#######Thread[Thread-1,5,main]##0#0#Fatal##Plain###com.sap.engine.frame.cluster.ClusterException: cluster Id is not unique.
at com.sap.engine.core.cluster.impl6.ms.MSRawConnection.attachToMessageServer(MSRawConnection.java:815)
at com.sap.engine.core.cluster.impl6.ms.MSConnectionImpl.attachToCluster(MSConnectionImpl.java:73)
at com.sap.engine.core.cluster.impl6.ClusterManagerImpl.init(ClusterManagerImpl.java:985)
at com.sap.engine.core.Framework.loadSingleManager(Framework.java:396)
at com.sap.engine.core.Framework.loadManagers(Framework.java:163)
at com.sap.engine.core.Framework.start(Framework.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.boot.FrameThread.run(FrameThread.java:58)
at java.lang.Thread.run(Thread.java:534)
I saw the http://help.sap.com/ site and there it has been mentioned that :
The following processes must be running for the simplest installation (one dispatcher, one server):
Message Server ( msg_server or msg_server.exe)
Enqueue Server ( enserver or enserver.exe)
Dispatcher and server process (two jlaunch.exe)
Software Deployment Manager (SDM, jlaunch.exe)
Also when I see the developer trace file for jcontrol.exe It actually invokes Jlaunch.exe internally
based on the above stacktrace will you be able to suggest me what might have went wrong
Actually I am trying to find out which all exe file files should be executed in what order so as to start the SAp J2EE engine so that I can deploy some applications on it
Thanks in advance
sai -
Error in starting application server SAP Netweaver ABAP Trial version
After starting the application server on my Windows Vista system, i'm getting next error :
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24701,ERR_EXHNDLR: Could not initialize exception handler.
-24748,ERR_FILEOPEN: Error opening file C:\sapdb\data\wrk\dbmsrv_ACN7440R8FCGNN.
err
-24826,ERR_NIERROR: Can not open file 'C:\sapdb\data\wrk\dbmsrv_ACN7440R8FCGNN.e
rr'. (System error 5; Access is denied.)
Error: Error while calling dbmcli
"C:\sapdb\programs\pgm\dbmcli" -d NSP -u , db_online
============== Start database failed !
Press any key to continue . . .
Any suggestions to solve this ?
regards,
HansMay I ask what you mean by "first start Windows services related to MaxDB" ?
I have what I believe is very a similar problem.
Only the MessageServer starts in sapmmc. The Dispatcher soon stops and I then get the message
"C:\SAP\NSP\DVEBMGS00\work>set DBNAME=NSP
C:\SAP\NSP\DVEBMGS00\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
C:\SAP\NSP\DVEBMGS00\work>dbmcli -U "c" db_state 1>adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "ONLINE" adatmp
C:\SAP\NSP\DVEBMGS00\work>dbmcli -U "c" dbm_version VERSION 1>adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.2" adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.3" adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.4" adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.5" adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.6" adatmp
C:\SAP\NSP\DVEBMGS00\work>findstr "7\.7" adatmp
Error: Database NSP NOT started !"
in C:\SAP\NSP\DVEBMGS00\work\stderr0.
The best I can get is that the disp+work.EXE Dispatcher is "Running, Message Server connection, OK, Dialog Queue time: 0.00 sec" after starting in sapmmc but it stops after 1:15 with the above message.
Most grateful for any suggestions.
Edit : I now have instead of the above
C:\SAP\NSP\DVEBMGS00\work>findstr "ONLINE" adatmp
ONLINE
Database NSP successfully started !
but still the Dispatcher stops afer 1:15.
I now find the message that the system cannot find a file that I see is in fact present under the path given in the message:
ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 [dlnt.c 241]
M Error 126 = "Das angegebene Modul wurde nicht gefunden."
which puzzles me. -
SAP WAS J2EE server installation on Windows Vista
Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus -
Error while starting Apache WebServer in SAP Content server from sapcs user
Dear Consultants,
We are facing a Issue while staring Apache Server from SAPCS user
We have installed SAP Content server 6.4 with SAP MAX DB 7.6 on RHEL
Linux 64 bit OS, we also installed Apache web server server following SAP
Standard Installation guide,
When We run Apache server using sapcs user we are facing a error
Error (1) -
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Error (2) - same issue we get when we use httpd script to start apache
service.
[sapcs@hpsebdev1 bin]$ httpd -k start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Please Help regarding the issue
Regards
Gagan Sharma
SAP BASIS ConsultantHello Gaghan,
From the error it seems that port 80 is being already used. Did you install the second Apache under a different user?
Can you please try using another port?
Regards,
Blanca -
WLST start managed server throws error but the server was successf. started
Hello,
I have a funny problem.
We are already using long time the WLST feature to startup managed servers via WLST connected to the Admin Console.
Normally when we start a managed server it looks WLST output like this:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Successfully connected to Admin Server 'xxx_admin' that belongs to domain 'xxx_domain'.
Starting server xxx_001 .................................................................................
Disconnect from Admin server
This was working without any errors when inside your nodemanager.properties file the following is set:
StartScriptEnabled=false
Unfortunately I'm now forced to use:
StartScriptEnabled=true
and specified a custom "+StartScriptName+" (startWebLogicCustomScript.sh) as well.
What happen now is the following. WLST starts the script set at "StartScriptName" and once this script is finished (The script do not generate errors and returns return code 0) I get an error:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Successfully connected to Admin Server 'xxx_admin' that belongs to domain 'xxx_domain'.
Starting server xxx_001 .................................................................................
Exception while starting server 'xxx_001'
No stack trace available.
This Exception occurred at Thu Mar 03 01:01:40 CET 2011.
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name xxx_001 failed to be started
at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleHandler.java:502)
at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.java:523)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
The funny thing now is that the managed server which WLST is given the error above is RUNNING so the everything is fine.
So in the Admin Console everything is shown running.
I don't would be normally worry about this since i can get around this with additional checks in my WLST script but what I'm worry about are the entries in the NodeManager log file which are generated (Especially the bold marked):
+<INFO> <xxx_domain> <xxx_001> <Starting WebLogic server with command line: <just removed>/domains/xxx_domain/startWebLogicCustomScript.sh >+
+<INFO> <xxx_domain> <xxx_001> <Working directory is '<just removed>/domains/xxx_domain'>+
+<INFO> <xxx_domain> <xxx_001> <Rotated server output log to "<just removed>/domains/xxx_domain/servers/xxx_001/logs/xxx_001.out00025">+
+<INFO> <xxx_domain> <xxx_001> <Server error log also redirected to server log>+
+<INFO> <xxx_domain> <xxx_001> <Server output log file is '<just removed>/domains/xxx_domain/servers/xxx_001/logs/xxx_001.out'>+
++<INFO> <xxx_domain> <xxx_001> <Server failed during startup so will not be restarted>++
+<WARNING> <Exception while starting server 'xxx_001'>+
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Checking the server output log everything looks ok.
Does anyone have an idea why WLST / NodeManager is trowing errors here and how to solve this problem ?
Does maybe my custom script needs to return a special return code ?
WLS version used is 10.3.3.0.
Thx a lot.Does nobody have an idea ?
-
Manged Server not able to start.. default policy provider was not found.
Hi All,
SOA suiite 11.1.1.1.3.0
I am able to start admin server successfully. and while starting Managed server I am getting below error.
I am trying to start managed server in cmd promt.
could anyone pls suggest me to resolve this??
####<Jun 5, 2013 7:06:26 PM IST> <Info> <Server> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439386568> <BEA-002609> <Channel Service initialized.>
####<Jun 5, 2013 7:06:26 PM IST> <Info> <Socket> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439386597> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<Jun 5, 2013 7:06:26 PM IST> <Info> <Socket> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439386617> <BEA-000436> <Allocating 3 reader threads.>
####<Jun 5, 2013 7:06:26 PM IST> <Info> <Socket> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439386619> <BEA-000446> <Native IO Enabled.>
####<Jun 5, 2013 7:06:26 PM IST> <Info> <IIOP> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439386802> <BEA-002014> <IIOP subsystem enabled.>
####<Jun 5, 2013 7:06:29 PM IST> <Error> <Security> <SantuSagar-PC> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370439389749> <BEA-090892> <The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.>
####<Jun 5, 2013 7:06:29 PM IST> <Critical> <WebLogicServer> <SantuSagar-PC> <soa_server1> <main> <<WLS Kernel>> <> <> <1370439389752> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getIdStoreConfig(LdapIdentityStoreProvider.java:228)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:110)
at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:61)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,
SantoshIt is quite clear you have an incorrect setting in your weblogic configuration:
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..
Can you please check your config.xml and ensure your admin host and port is valid? -
Does SAP WAS 6.40 has inbuilt JMS Server?
Hi all,
Does SAP WAS 6.40 has inbuilt JMS Server?if yes how to connect XI with that server?
regards
kishThis would help u in understanding the basics,
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
For connection
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cfe5ad90-0201-0010-9b9a-a62db638759b
Regards,
Prateek
Maybe you are looking for
-
File view permissions not working in Rel 1
I'm part of a team setting up a new portal; Oracle 9iAS rel 1. I have a portlet which is really a view into a folder called Social Events. Under Folder Style > Access, permission is granted to the company group: View Content, Manage Items, and this a
-
Hello, I have installed a JNLP app into the system cache and it fails to run under the administrator account in Windows XP SP2. But when I install it to the administrator's user cache the JNLP app works fine. Also, if I install the JNLP app to a norm
-
Is there any source that I can find "prel" files?
Hi all, Is there any source that I can find "prel" files! I realized that the best way of learning for me is to open prel files and examine ready projects and adjust according to my needs! This method is fastest according to reading books or watching
-
Project Special stock indicator PROJ-KZBWS
Hi, I created a project with TCODE CJ20N. The project's valuation indicator(KZBWS) is assuming "M" and this field was not visible at moment of creation, Is there any config to define "A" ? Regards, Menoita
-
Can someone post the right configuration to set when sample worklist is deployed as remote client (REMOTE_CLIENT setting in BaseServlet.java) ? I am facing the following exception. Please help. javax.naming.NameNotFoundException: UserMetadataService