Start OEM issue. Thanks!
Hi, Dear friends,
I tried to start OEM, I started listener, then I issued:
$emctl start dbconsole
OC4J Configuration issue. /u01/app/oracle/product/10.1.2/bin/oc4j/j2EE/OC4J_DBConsole not found.Then I tried :
$emctl
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.2.0
Copyright (c) 1996,2005 Oracle Corporation. All rightd reserved.
Invalid arguments
Unknow command option "" or component ""
Usage::
Oracle Enterprise Manager 10g Application Server Control command:
emctl start| stop| status iasconsole
........Any help will be highly appreciate!!!
>
Then I tried :
$emctl
Oracle Enterprise Manager 10g Application Server
Control Release 10.1.2.2.0
Copyright (c) 1996,2005 Oracle Corporation. All
rightd reserved.
Invalid arguments
Unknow command option "" or component ""
Usage::
Oracle Enterprise Manager 10g Application
Server Control command:
emctl start| stop| status iasconsole
Looks like the 'emctl' you running is for iAS not Oracle Database. Application Server EM doesn't have dbconsole.
Do
which emctlfind out which emctl you are running by default.
Make sure your ORACLE_HOME point to Oracle Database Installation and in your $PATH, Oracle database installation $ORACLE_HOME/bin is in preceding position not Application Server.
Similar Messages
-
OWB - OEM issue?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31 (Win XP). The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
I find OEM (10.2.0.0.0 with oracle database ver 10.2.0.0.0) part of OWB program folder. As I start OEM, I creted the database connection in OEM explorer. I tried to loggin to created database connection.
I got “ORA-12541: TNS:no listener” error.
It was working all day in OWB/Sqlplus before starting OEM. I noticed OEM changed my tnsnames.ora file in OWbhome\network\admin directory using timestamp.
I came out of OEM session. All my logins via OWB/SQLpus/SQL developer results in “ORA-12541: TNS:no listener” error.
I checked via tnsping on command window, which results in “ORA-12541: TNS:no listener” error.
I restored my tnsnames.ora from backup, all are working except OEM.
Did anyone use OEM with OWB?
Any idea, what is going on ?
Thanks in advance.
RIHi,
over the connection goes not only the sql statements for connecting, also much auditing and logging informations goes from one machine to the other. So development and database should be as near as possible for better speed.
Perhaps working direct on the server will increase the speed?
Regards,
Detlef -
Hi,
I am getting the below error while starting OEM in oracle 11g.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://ipa27dor.i-flex.com:5502/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1/ipa27dor.i-flex.com_reveleus/sysman/log
bash-3.00$ more emagent.log
2010-09-04 21:25:55,463 Thread-1 Starting Agent 10.2.0.4.2 from /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1 (00701)
2010-09-04 21:25:55,897 Thread-1 [Oracle Exadata Storage Server] InstanceProperty (MgmtIPAddr2) is marked OPTIONAL but is being used (00506)
2010-09-04 21:25:56,451 Thread-1 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2010-09-04 21:26:02,158 Thread-1 EMAgent started successfully (00702)
2010-09-04 21:26:02,292 Thread-2328 <Upload Manager> Exceeded Max allowed Upload data - No of files: 6, Size of upload data: 8.346267MB, Pct() of Disk used:
99.42%, Disabling collections (00852)
2010-09-04 21:26:02,292 Thread-2328 Disable collector (00406)
2010-09-22 18:18:09,152 Thread-1 Starting Agent 10.2.0.4.2 from /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1 (00701)
2010-09-22 18:18:09,173 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
2010-09-22 18:31:17,886 Thread-1 Starting Agent 10.2.0.4.2 from /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1 (00701)
2010-09-22 18:31:17,898 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
2010-09-22 19:00:44,129 Thread-1 Starting Agent 10.2.0.4.2 from /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1 (00701)
2010-09-22 19:00:44,130 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
2010-09-22 19:10:51,705 Thread-1 Starting Agent 10.2.0.4.2 from /oracle/oracle11g/app/ora11g/product/11.2.0/dbhome_1 (00701)
2010-09-22 19:10:51,707 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
operation. (error = 79)
2010-09-09 15:32:04,800 Thread-1 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag
2010-09-09 15:32:04,808 Thread-1 ERROR ssl: nzos_Handshake failed, ret=28862
2010-09-09 15:32:04,809 Thread-1 ERROR http: 6: Unable to initialize ssl connection with server, aborting connection attempt
2010-09-09 15:38:23,114 Thread-1 WARN http: nmehl_connect_internal: connect failed to (ipa27dor.i-flex.com:5502): A remote host refused an attempted connect
operation. (error = 79)
2010-09-09 15:38:57,970 Thread-1 WARN http: nmehl_connect_internal: connect failed to (ipa27dor.i-flex.com:5502): A remote host refused an attempted connect
operation. (error = 79)
2010-09-09 15:39:08,342 Thread-1 WARN http: nmehl_connect_internal: connect failed to (ipa27dor.i-flex.com:5502): A remote host refused an attempted connect
operation. (error = 79)
Please guide
Thanks.OEM is starting now... but not able to connect thru IE.
in logs i get the below error :- <Upload Manager> Exceeded Max allowed Upload data -
and when i try to upload manuallly i get the below error
EMD upload error: Upload was successful but collections currently disabled - disk full
how can i overcome this error. there is 600 MB of space in the disk curently -
System Start up issue in my ABAP + JAVA system
HI,
when i try to start up my SAP (ABAP+JAVA) system, server processes fail to start. Below is the trace file.
Though it says missing file jvmx.jar, not sure if this is the reason for the start up issue.
Thanks to check and assist.
trc file: "D:\usr\sap\P1D\DVEBMGS00\work\dev_server1", trc level: 1, release: "700"
node name : ID3944951
pid : 7752
system name : P1D
system nr. : 00
started at : Wed May 05 13:27:07 2010
arguments :
arg[00] : D:\usr\sap\P1D\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
arg[02] : -DSAPINFO=P1D_00_server
arg[03] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1243
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=P1D
arg[08] : -DSAPMYNAME=blrkec115278d_P1D_00
arg[09] : -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 7756] Wed May 05 13:27:07 2010
[Thr 7756] *** WARNING => INFO: Unknown property [instance.box.number=P1DDVEBMGS00blrkec115278d] [jstartxx.c 841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.host=blrkec115278d] [jstartxx.c 841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : blrkec115278d
-> ms port : 3901
-> OS libs : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : blrkec115278d
-> ms port : 3901
-> os libs : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3944900 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3944950 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [03] bootstrap_ID3944951 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3944900 : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID3944950 : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] ID3944951 : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 7756] JLaunchRequestQueueInit: create named pipe for ipc [Thr 7756] JLaunchRequestQueueInit: create pipe listener thread [Thr 7776] WaitSyncSemThread: Thread 7776 started as semaphore monitor thread.
[Thr 7764] JLaunchRequestFunc: Thread 7764 started as listener thread for np messages.
[Thr 7756] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202) [Thr 7756] CPIC (version=700.2005.12.02)
[Thr 7756] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx1024m [jstartxx.c 2604]
[Thr 7756] [Node: server1] java home is set by profile parameter Java Home: C:\j2sdk1.4.2_21 [Thr 7756] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID3944951]
-> node name : server1
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_21
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=160m -XX:MaxNewSize=160m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC
-> java vm version : 1.4.2_21-b03
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\server1
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50026
-> shutdown timeout : 120000
[Thr 7756] JLaunchISetDebugMode: set debug mode [no] [Thr 7792] JLaunchIStartFunc: Thread 7792 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server1]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]:
-> -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonP
-> roxy arg[ 7]:
-> -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.Por
-> tableRemoteObjectProxy arg[ 8]:
-> -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=256m
-> arg[ 12]: -XX:MaxPermSize=256m
-> arg[ 13]: -XX:NewSize=160m
-> arg[ 14]: -XX:MaxNewSize=160m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1 arg[ 20]:
-> -Dsun.io.useCanonCaches=false arg[ 21]: -Djava.awt.headless=true arg[
-> 22]: -XX:+UseParNewGC arg[ 23]:
-> -Dsys.global.dir=D:\usr\sap\P1D\SYS\global
-> arg[ 24]: -Dapplication.home=D:\usr\sap\P1D\DVEBMGS00\exe
-> arg[ 25]: -Djava.class.path=D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 26]:
-> -Djava.library.path=C:\j2sdk1.4.2_21\jre\bin\server;C:\j2sdk1.4.2_21\
-> jre\bin;C:\j2sdk1.4.2_21\bin;D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs;D:
-> \oracle\product\10.2.0\db_1\bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYS
-> ROOT\System32\Wbem;C:\Program
-> Files\CA\SharedComponents\ScanEngine;C:\Program
-> Files\CA\SharedComponents\CAUpdate\;C:\Program
-> Files\CA\SharedComponents\ThirdParty\;C:\Program
-> Files\CA\SharedComponents\SubscriptionLicense\;C:\Program
-> Files\CA\eTrustITM;C:\Program Files\Windows
-> Imaging\;D:\usr\sap\P1D\SYS\exe\uc\NTI386
-> arg[ 27]: -Dmemory.manager=1024M
-> arg[ 28]: -Xmx1024M
-> arg[ 29]: -Xms1024M
-> arg[ 30]: -DLoadBalanceRestricted=no
-> arg[ 31]: -Djstartup.mode=JCONTROL
-> arg[ 32]: -Djstartup.ownProcessId=7752 arg[ 33]:
-> -Djstartup.ownHardwareId=N1596875852
-> arg[ 34]: -Djstartup.whoami=server
-> arg[ 35]: -Djstartup.debuggable=no
-> arg[ 36]: -DSAPINFO=P1D_00_server
-> arg[ 37]: -DSAPSTART=1
-> arg[ 38]: -DCONNECT_PORT=1243
-> arg[ 39]: -DSAPSYSTEM=00
-> arg[ 40]: -DSAPSYSTEMNAME=P1D
-> arg[ 41]: -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 42]:
-> -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
-> arg[ 43]: -DFRFC_FALLBACK=ON
-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost arg[ 45]: -DSAPSTARTUP=1
-> arg[ 46]: -DSAPSYSTEM=00 arg[ 47]: -DSAPSYSTEMNAME=P1D arg[ 48]:
-> -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 49]: -DSAPDBHOST=blrkec115278d
-> arg[ 50]: -Dj2ee.dbhost=blrkec115278d
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType loadInto [Thr 7792] JHVMLoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server1]
[Thr 7872] Wed May 05 13:27:08 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 7872] Wed May 05 13:27:09 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 7872] JLaunchISetClusterId: set cluster id 3944951 [Thr 7872] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)] [Thr 7872] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Wed May 05 13:27:13 2010
5.640: [ParNew 81920K->5980K(1007616K), 0.0258446 secs]
Wed May 05 13:27:17 2010
9.773: [ParNew 87893K->13835K(1007616K), 0.0529425 secs]
Wed May 05 13:27:21 2010
13.293: [ParNew 95755K->17179K(1007616K), 0.0572638 secs]
Wed May 05 13:27:23 2010
15.634: [ParNew 99099K->17958K(1007616K), 0.0419008 secs]
[Thr 6392] Wed May 05 13:27:26 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver [Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6392] Wed May 05 13:27:29 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 7804] Wed May 05 13:27:33 2010
[Thr 7804] JLaunchIExitJava: exit hook is called (rc = -11113) [Thr 7804] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 7804] JLaunchCloseProgram: good bye (exitcode = -11113)Have you changed your java administrator password recently? If so, have you changed it in the configtool as well?
Kind regards,
Mark -
Reg:Server0 start up issue,exit code = -2
Hi Experts,
We have a dual stack system runnig on windows server, 2003
We are facing an issue while starting the Java instance...SDM, Dispatcher are up and running, but the Server0 start up failed with exit -2
Please, help me resolve the issue
Thanks in advance
regards
VenuYou need to check the logfiles
dev_bootstrap
dev_server0
std_server0.out
Markus -
MAJOR Start-up Issues: Can my imac be saved?
Hello all-
I sure hope someone can help me. I am really worried about the state of my imac. It is only ONE YEAR old and has always been maintained with the latest updates.
Quick background: A few weeks ago, while in screensaver mode, I returned to my mac to find a white screen with a folder and a question mark. I had never seen this before! It was frozen. I had to force shut down by holding the button on back. Since that time, the same thing has sporadically happened when the computer was in screensaver mode. In the last few days the problem has worsened with start up issues. Yesterday, when i started up the computer I kept getting just a blank white screen and what sounded like "a slow revving" of the disc several times and then nothing. After continually trying to restart (including in Safe Mode) eventually I got the apple logo and it started. When that happened, I immediately backed up everything for fear my hard drive is dying and then began to troubleshoot.
What I've tried: After looking through the threads I have tried a number of suggestions.
- I repaired the Disk using First Aid (it says all was Okay)
- I repaired permissions
- I disconnected all cords & reset the SMC
- I booted from the disc & ran the Extended Apple Hardware Test (it said all appears Okay)
After doing these things last night, the computer started up several times just fine so I shut it down for the night.... which brings me to this morning!
Start up was MUCH worse than yesterday. Same slow revving sound, white screen and nothing (at least 10 times) - even when trying Safe Mode. Then it worsened to a black screen and no sound at all - as if nothing was happening. I thought it was dead! I unplugged the power cord for 15 seconds and tried again - this changed it back to the white screen and a sound of more revving power. After about 3 tries, I got the apple logo and the spinning wheel for about 2 minutes - then it started!
This is where I am now. I am afraid to turn it off and not sure what else to try. I thought after all I did last night, the problem was fixed. Why does the hardware test and repair disc say all is fine? And why after doing those things last night did it start up numerous times? (and speedy too!) But then this morning I'm back where i started.... ? How can I troubleshoot this problem further?
I would really like to try everything before resorting to taking it in. Money is tight right now.
GREATLY appreciate any advice!
Thanks a lot,
KarenWarning!! ** (See bottom of post)
New Development: From Disk Utility, I chose to run "verify disk" again. (Somewhere I had read that sometimes, it needs to be run a few times before it will find a problem with the disk).
Sure enough! This time I got errors and it suggested I repair the disk!
Errors in verify mode were in RED as follows:
Invalid index key
The volume Macintosh HD needs to be repaired
Error: Filesystem verify or repair failed
I then restarted with the system disc, opened First Aid and chose Repair.
The following showed up in RED during the repair process:
Invalid index key
Incorrect number of thread records
Invalid directory item count
volume bit map needs minor repair
Invalid free block count
volume header needs minor repair
And finally in GREEN (after 10 min):
HD Repaired Successfully
** After doing this, and trying to restart, i get the white screen and the spinning wheel indefinitely. (even when i try Safe Mode) It appears I can no longer boot my HD. I wanted to share the errors above incase it brings anyone to any further insight, but I'm not so sure it helped my situation.
Suggestions? -
Having start-up issues with my 1st gen Macbook Pro
Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
http://youtu.be/oDCfHM-ZoesSafe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
Use Software Update to update your os to 10.6.8 and anything else that needs to be updated. -
Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%. -
I have an iPhone 6. For the first two weeks my bluetooth worked fine but then started having issues. Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls. The radio continues to play. Please help!
Hello there, Srushevics.
It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
If you can’t use a Bluetooth accessory or car kit
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Narrow down start up issue need experienced/knowledgeble Mac Expert
Hi,
I have spoken with two level 2 mac specialists and both have concluded that I am having a 3rd party software issue with my Mac Pro 3.0. The issue is it takes 5 minutes for my Mac to boot up from start up/restart. Here is my question; in OS9 to narrow down an issue I could simply drag an Extension on to the desktop and restart to see if the issue continued. Since this issue that I am having is a 3rd party conflict in start up is there a way to remove or 'disable' 3rd party software so basically the system thinks it's not there so I can narrow this issue down to who is the problem child? I really don't want to trash all my 3rd party software to figure this out.
I have recently done a Archive and Install from the install CD 10.5 and the start up was fine. Then when I update to 10.5.4 or 10.5.5 the long start up issue is back. So I am concluding that something is not 10.5+ compatible.
Look forward to someone knowing the answer to my question.
Thanks.Hi Francine thanks for your input. If I'm not mistaken the Shift key is 'Safe Mode' and that is great but I need to either remove one 3rd party software package at a time or be able to add one at a time until I find the ugly step child. And I don't think Safe Mode will allow that.
I did try the Verbose mode which was pretty cool to see however once it kicks on the video card and goes to the blue screen that is the transition screen after the Apple and before the desktop I lose the verbose read out and at the blue screen is where it hangs for 4 minutes. So unfortunately that didn't work. I really need to know if I can take out a key 'Component' from a specific folder that will not allow a 3rd party to register and then if it's not it simply place it back in the folder and that software is back in business. I am amazed that with today's technology first, that the computer doesn't tell you what the issue is and second that no one has come up with a way to trouble shoot when things do go as planned. Sigh. Any other recommendations? Anyone....Bueller....Bueller? -
I installed Oracle9.0.2 on debain 3.0_r1 and selected software only option to install.
After installation finished, I try to start OEM, but it failed and also can not start dbca.
Error messages as following:
oracle@debian:~/product/9.2.0/bin$ ./oemapp console&
[1] 13128
oracle@debian:~/product/9.2.0/bin$ SIGSEGV 11* segmentation violation
stackbase=BFFFEC2C, stackpointer=BFFFD1E4
Full thread dump:
"SIGQUIT handler" (TID:0x4219a2a0, sys_thread_t:0x83127e8, state:R, thread_t: t@2051, sp:0x0 threadID:0x3359, stack_base:0xbf5ffaa0, stack_size:0x200000) prio=1075652256
"Finalizer thread" (TID:0x4219a088, sys_thread_t:0x83126c0, state:CW, thread_t: t@1026, sp:0x0 threadID:0x3358, stack_base:0xbf7ffaa0, stack_size:0x200000) prio=1075652256
"main" (TID:0x4219a0b0, sys_thread_t:0x830c338, state:R, thread_t: t@1024, sp:0x0 threadID:0x3348, stack_base:0xbfffec2c, stack_size:0x200000) prio=1075652256 current thread
java.lang.System.initializeSystemClass(System.java)
Monitor Cache Dump:
Registered Monitor Dump:
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Waiting to be notified:
"Finalizer thread" (0x83126c0)
Monitor registry: owner "main" (0x830c338, 1 entry)
[1]+ Aborted ./oemapp console
oracle@debian:~/product/9.2.0/bin$Thanks for the reply, I tried that but it just gives
me:
Oracle Enterprise Manager 10g Database Control
Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All
rights reserved.
Agent is running. Stop the agent and rerun the
command.
But the agent is definitely not running.i.e Stop the agent and rerun rodneyli's command you tried above. -
Hi,
I have installed Orcle grid control10.2.0.1 on node 1.Its a 11gr2 rac database.
But i am not able to start OEM.
[oracle@rac1 bin]$ ./opmnctl status
Processes in Instance: EnterpriseManager0.rac1.raczone.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | 0 | NONE
HTTP_Server | HTTP_Server | 8176 | Init
LogLoader | logloaderd | 0 | NONE
dcm-daemon | dcm-daemon | 0 | NONE
OC4J | home | 8168 | Init
WebCache | WebCache | 8191 | Alive
WebCache | WebCacheAdmin | N/A | Down
[oracle@rac1 bin]$ ./opmnctl startproc ias-component=OC4J
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no processes matched this request
[oracle@rac1 bin]$ ./opmnctl startproc ias-component=DSA
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no processes matched this request
[oracle@rac1 bin]$ ./opmnctl startproc ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no processes matched this request
[oracle@rac1 bin]$ ./opmnctl status
Processes in Instance: EnterpriseManager0.rac1.raczone.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | 0 | NONE
HTTP_Server | HTTP_Server | 8176 | Alive
LogLoader | logloaderd | 0 | NONE
dcm-daemon | dcm-daemon | 0 | NONE
OC4J | home | 0 | NONE
WebCache | WebCache | 8191 | Alive
WebCache | WebCacheAdmin | N/A | Down
[oracle@rac1 bin]$ opmnctl startproc process-type=OC4J_EMPROV
-bash: opmnctl: command not found
[oracle@rac1 bin]$ ./opmnctl startproc process-type=OC4J_EMPROV
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no enabled components for this request
[oracle@rac1 bin]$ ./opmnctl startproc process-type=DSA
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no enabled components for this request
[oracle@rac1 bin]$ ./opmnctl status
Processes in Instance: EnterpriseManager0.rac1.raczone.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | 0 | NONE
HTTP_Server | HTTP_Server | 8176 | Alive
LogLoader | logloaderd | 0 | NONE
dcm-daemon | dcm-daemon | 0 | NONE
OC4J | home | 0 | NONE
WebCache | WebCache | 8191 | Alive
WebCache | WebCacheAdmin | N/A | Down
[oracle@rac1 bin]$ ./opmnctl stopall
opmnctl: stopping opmn and all managed processes...
[oracle@rac1 bin]$ ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
3 of 4 processes started.
ias-instance id=EnterpriseManager0.rac1.raczone.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=9016)
failed to start a managed process after the maximum retry limit
Log:
/raczone/oem/OracleHomes/oms10g/opmn/logs/OC4J~home~default_island~1
[oracle@rac1 bin]$ ./opmnctl status
Processes in Instance: EnterpriseManager0.rac1.raczone.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 8936 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | N/A | Down
WebCache | WebCache | 8963 | Alive
WebCache | WebCacheAdmin | 8945 | Alive
[oracle@rac1 bin]$ ./opmnctl startproc process-type=DSA
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rac1.raczone.com:6202
no enabled components for this request
[oracle@rac1 bin]$ ./opmnctl status
Processes in Instance: EnterpriseManager0.rac1.raczone.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 8936 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | N/A | Down
WebCache | WebCache | 8963 | Alive
WebCache | WebCacheAdmin | 8945 | Alive
[oracle@rac1 bin]$ cd ../
[oracle@rac1 opmn]$ cd ../../agent10g/bin/
[oracle@rac1 bin]$ ls -lrt emctl
-rwxr--r-- 1 oracle oinstall 11777 Jun 19 20:59 emctl
[oracle@rac1 bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Malformed URL: http://rac1.raczone.com:%EM_SERVLET_PORT%/emd/main/
Error connecting to http://rac1.raczone.com:%EM_SERVLET_PORT%/emd/main/
[oracle@rac1 bin]$Its a fresh installation
nothing is logged in opms.log file
[oracle@rac1 logs]$ ls -lrt
total 196
-rw------- 1 oracle oinstall 0 Jun 19 20:48 opmn.log
-rw-r--r-- 1 root root 90 Jun 25 17:06 DSA~1
-rw-r--r-- 1 root root 76 Jun 25 17:06 LogLoader~logloaderd~1
-rw-r--r-- 1 root root 51 Jun 25 17:06 dcm-daemon~dcm-daemon~dcm~1
-rw------- 1 oracle oinstall 9043 Jul 4 12:26 ons.log
-rw------- 1 oracle oinstall 3479 Jul 4 12:26 WebCache~WebCacheAdmin~1
-rw------- 1 oracle oinstall 3400 Jul 4 12:26 WebCache~WebCache~1
-rw------- 1 oracle oinstall 14009 Jul 4 12:26 HTTP_Server~1
-rw------- 1 oracle oinstall 77612 Jul 4 12:26 OC4J~home~default_island~1
drwx------ 2 oracle oinstall 4096 Jul 4 12:26 states
-rw------- 1 oracle oinstall 57908 Jul 4 12:26 ipm.log
[oracle@rac1 logs]$ -
When starting oem Agent ir error out with java.lang.NoClassDefFoundError: o
Hi ,
Facing below error when starting oem agent with comand./emctl start oms
Oracle Enterprise Manager 10g Release 4 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
opmnctl: opmn is already running
93938978
ADMN-202045
An exception occurred while constructing the OracleAS Repository API, a DCM dependent component.
Resolution:
This exception may be occurring because the ias.properties file is misconfigured.
Check the exception thrown by the OracleAS Repository API for any additional resolution information.
Base Exception:
java.lang.NoClassDefFoundError
oracle/security/jazn/util/JAZNSecurityManager
java.lang.NoClassDefFoundError: oracle/security/jazn/util/JAZNSecurityManager
at oracle.ias.sysmgmt.persistence.SeedDbAccess.<init>(Unknown Source)
at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Source)
at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDbAccess(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ComponentTypeFactory.init(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
Starting HTTP Server ...
Starting Oracle Management Server ...
Checking Oracle Management Server Status ...
Oracle Management Server is Down. -
hi every1
i m getting problem while starting oem .
please help
C:\Users\thiru>set ORACLE_SID=cng1
C:\Users\thiru>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
Copyright (c) 1996, 2008 Oracle Corporation. All rights reserved.
https://RAMTECH-8.RAMTECH.COM:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...System error 5 has occurred.
Access is deniedCould be you don't have a dbconsole service. Or it can be started, default it's started automatic. Maybe it's on disabled.
Or take a look at emctl status dbconsole
If your on W2008 try opening the dos-box as "Run as Administrator".
Eric -
Started having issues with camera raw. cannot access from bridge. Greyed out.
Started having issues with accessing camera raw from bridge. I have CS6 and LR5. Should I attempt to uninstall CS6 and reinstall. I have backup on external hard drive for my photos but will I need to reimport photos after uninstall? Some of the forums are suggesting that my program might be corrupt. Can anyone assist?
This should solve problem. http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Maybe you are looking for
-
SDO Service Data Objects transaction behavior in BPEL question
I was led to believe (this is taught in the SOA BCA class) that if we create, modify, or delete an SDO then the changes are committed at the end of the scope activity in the BPEL process and rolled back if there is an uncaught fault in the scope. I h
-
HOW DO I GET NUMBERS TO DO WHAT I WANT?
HELP PLEASE: I FIND NUMBERS CONFUSING. THE OLD WORKS SPREADSHEETS WERE SO MUCH EASIER/SIMPLER. I CAN’T SEEM TO GET THE FORMULAS & FUNCTIONS ENTERED CORRECTLY. I DON’T KNOW WHAT THEY MEAN “PRESERVE ROW” OR “PRESERVE COLUMN”.. SO DON’T KNOW IF I NEE
-
I want make a apple id for my 12 year old where is the page for that
trying to set up different apple ids for kids one of them is under 14 how do i do the parent thingy
-
How to get Sequence File Name ?
Hello everybody !! I'm using TestStand 3.1 and i would like to get sequence file name. I've tried to use NameOf() function, but without success. Of course, I've searched previous posts about the same question, but nothing works. Is there someone able
-
Open specific PDF document in Windows 8.1 Reader Application without File Associating
I have a user case where i need to be able to open one spesific PDF document without changing "File Associating" from Adobe Reader. Is there a good way to open the reader app and a document from CMD or simular? I know I manual can use "Open With" but