Start project on a particular frame?

Hey everyone!
I just want to say thanks for the help I have gotten so far! It has been quite useful!
Does anyone know how I can start my project on a particular frame? I accidentally made my "main" page for my site on the 4th frame and it starts on the 1st frame....
Thank you again!

drag your 4th frame to first
or
write gotoAndStop(4) on frame 1
http://www.darshanrane.com

Similar Messages

Listing the objects in the particular frame

I have just started to refresh Swing. I want all the objects available in the particular frame.
Ex. I have a login frame. I want all the objects available in the frame.
ie.
objects of two textfields.
objects of two labels (un and pwd)
submit button
cancel button .
How to perform this ?

Hi,
use Container#getComponents()
NB : On JFrame (or JDialog) , you should use getContentPane().getComponents().
Nico

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames)

How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.

In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
Andy

Navigating from one movie to a particular frame in another

Is it possible to navigate to a particular frame in a different movie... the reason being, I am trying to minimise the size (mb) of the movie so it doesnt get to a stage where the machine it is on bogs down. For example, I am cutting the movie down into each product which has 20-30 stop frames in it (getting to around 24mb) per product... if i were to combine all products together (15 of them), u can imagine the size (mb) of the movie...
Thanks again

I found another post similar to this with an answer that worked. Sorry for the double post.

Poll: What is Your Web Start Project of the Year 2003?

Hi,
The Saturn Times announced the nominations for the "Web Start Project of the Year 2003" award today.
The line-up includes:
* NetX
* OpenJNLP
* Xito BootStrap
* JDistro/Warf
* Web Application Launcher (WAL)
* Web Start Services Pack
* Apollo
* Rachel
* Lopica Web Start Tools
* Vamp Ant Task Suite
Cast your vote today and help find the winner.
Full story and pollstation @ http://lopica.sourceforge.net/times/2003/12/poll_what_is_your_web_start_project_of_the_year_2003.html
- Gerald

Hi,
Due to popular demand here are the links to the ten Web Start Project of the Year 2003 contenders for easy reference.
* NetX online @ http://jnlp.sourceforge.net/netx
* OpenJNLP online @ http://openjnlp.nanode.org
* Xito BootStrap online @ http://xito.sourceforge.net/projects/bootstrap
* JDistro/Wharf @ http://www.jdistro.com
* Web Application Launcher (WAL) @ http://w-a-l.sourceforge.net
* Web Start Services Pack @ http://lopica.sourceforge.net/services
* Apollo @ http://ajax.sourceforge.net/apollo
* Rachel @ http://rachel.sourceforge.net
* Lopica Web Start Tools @ http://sourceforge.net/projects/lopica
* Vamp Ant Task Suite @ http://vamphq.com/ant.html
- Gerald

Load movie in root and go to particular frame

Hi,
I have main flash file called index.swf and in that I'm loading an external movie called help.swf using the below code:
loadMovie("help.swf",1);
On help.swf I have a button which brings me back to the main file i.e. index.swf using the below code.
_root.loadMovie("index.swf");
When index.swf is loaded I want it to go to a particular frame.
I tried using levels but then my print function doesn't work properly.
Need help urgently.
Thanks,
Sunira

Instead of using loadMovie you need to use the MovieClipLoader.loadClip() method so that you can listen for the completion of the file being loaded. If you look in he help documents for MovieClipLoader.addListener it includes an example.

Can you Choose a Particular Frame for Quicktime Icon Preview?

Is it possible to choose a specific frame for a Quicktime file icon preview? A lot of movies start out with a black frame and the icon preview in Finder is therefore a black square. I would like to be able to choose the frame to use for the preview.

Badunit wrote:
Is it possible to choose a specific frame for a Quicktime file icon preview? A lot of movies start out with a black frame and the icon preview in Finder is therefore a black square. I would like to be able to choose the frame to use for the preview.
I don't know if this is possible (ask in the QT forum) but you can trim the movie with QT player to get rid of the black frame at the beginning of the movie. you can also take a screenshot of any frame you want and apply it as a custom icon to the movie.

Fail to start project

Hi, everyone
When I click start to run the project, there is a error message:
Failed to start project
ADDITIONAL INFORMATION:
Method not found: 'Boolean Microsoft.SqlServer.Dts.Design.VisualStudio2012Utils.IsVisualStudio2012ProInstalled()'. (Microsoft.DataTransformationServices.VsIntegration)
I installed vs2012 iso and integrated, my version is 11.0.5058.0.
Any help appreciate.

Hi Everyone,
I have just reloaded my machine from scratch. I've only installed Office 2013, SQL Server 2012, Visual Studio 2012, the latest SQL Server Data Tools and the latest SQL Server Data Tools for BI. And after wasting an entire day I get exactly the same error.
Here are the steps to reproduce...
1) Take one HP machine with Intel i3 processor and 8GB ram
2) Install Windows 8.1 64bit and then full Windows Update for all products, restart
3) Install Windows 8.1 Update 1 then Windows Update all products, restart
4) Enable windows features - IIS, Hyper-V and .NET 3.5 and Windows Update all products, restart
5) Install Office Pro 2013 32bit
6) Install Visio 2013 32bit and then Windows Update all products, restart
7) Install SQL 2012 Developer 64bit with all options except Data Tools, update, restart
8) Install Visual Studio 2012 Ultimate with all options except Data Tools, update, restart
9) Install SQL Server Data Tools 11.1.40403.0 EN
10) Install SQL Server Data Tools for BI VS2012 x86
11) Install SQL Server 2012 Service Pack 2
12) One final Windows Update with Microsoft Products and then a restart
13) Unlucky 13, the SSIS packages open in the editor but trying to execute gives the error described here

How do you start music on the 8th frame in iMovie on iPad

how do you start music on the 8th frame on a ipad with imovie

Add a song to the start, trim it to 10 frames or what you want,
THen turn the volume to zero.
THen next track then starts where the silent track ended.
Terrible workaround, but it works.

How do I start on a particular frame?

Hey guys, I need my Adobe Flash CS5 project to start on the 4th frame in the project on the timeline, instead of the first.
I have tried gotoAndStop and gotoAndPlay, but both somehow disable other actions I have setup on the timeline, like on the website I'm making, 3 buttons, "Home / About / Info" it disables buttons from switching frames, very odd.
Thank you!
Michael

Ok..thats pretty confusing to read, I am a beginner.
The reason why I have actions on different frames is between i have motion tweens on each one to animate them.
Let me paste my timeline.

Project not showing full frame in a compound clip

Hi Folk;
I am finishing my first project in FCPX (10.0.9) . Overall everything went very well.
I had another editor start the project on another computer.
I copied the event to my iMac and continued the edit. No problems until I exported the project for the client review.
I have a compound clip with mixed footage and a storyline and connected clips that I have used in a project with several compound clips.
I can play this particular compound clip fine and all the video displays fine. (see picture #2)
I lay the this Compound clip into the project and I get less than full frame out in my "storyline" elements - especially after the orange render bar disappears -
I sent the client a version with the "drop out" video (see first pix below where image does not reveal full frame ) and have spent a few hours looking for a cause for my issue. I am wondering if I am the only one dealing with this.
I have created a work around - exported the compound clip and reimport it as a full clip and layed it into the timeline.
The setting for the compound clip are XDCAM sony and the footage that is at issue is AVCHD from a panasonic.
I have several events providing footage for the compound clip
The project has seveal compound clips from different events
The event folder I created seems to be where the issue lives. or maybe the render -
I am using orginal footage not proxies.
I want to avoid this in the future so any insight is helpful.
I feel I have made a mess of my first project and want to clean up any bad habit that may be causing my problem.
Thanks for the opportunity to diagnos this.
I am sure this is as clear as mud.
Cheers!

when you first create a new project, FCPX *can* be set to accept "Automatic Settings" -- basically, it will take the properties of the first clip dropped in the storyline. This can be very convenient if you know the media will be all the same, or you know how to manipulate the "first drop".
If you know the format you want your project to be, it's better to set that up manually when you start a new project (Advanced Options). When you apply your media to the storyline, FCPX will conform the media to the project settings. It doesn't always work perfectly (due to custom or proprietary differences in file formats for the containers holding the media.) For instance, one of my older (SD) camcorders produces "Samsung AVC" (from Get Info on the file) and FCPX simply will not recognize the anamorphic footage.
Anyway, so, yes, I would suspect the 1440x1020 footage might be problematic. (Are you sure it's 1020?? or did you mistype? If it's actually 1080, it still might be giving you problems. All of my 1440 footage requires manually adjusting the width by 133.33%).
You can force a change for your project by clicking going out into the Project Library and with your project selected, you should see a wrench icon at the bottom right of the inspector. Click that and adjust your project settings (you cannot change the frame rate once a project is started, but you can change just about everything else.) Once you get the format set up (and you go back into your project), then you'll know which clips will need to be adjusted. If you have footage that won't fit the frame, you will probably need to go into the video tab > Transform, turn down the Scale disclosure triangle and adjust the X scale (usually) and Y scale (only if necessary.) If the footage you need to conform is SD, there is an Anamorphic Override option available in Info > Settings.
About compound clips... FCPX tries to guess a format based on "common" properties. If you're creating compound clips with mixed media - Use Custom Settings and set the properties to be the same as the project format.
HTH

ActionScript Project - Export classes in frame 2?

I have a holder swf that loads in a swf that has its own built in preloader. Problem is those preloaders are not seen. The loaded swf only displays after it is 100% complete. On its own, the swf with preloader works fine.
I created the preloader by using the Frame metadata tag:
(import classes etc.)
[SWF(frameRate=60, width=900, height=580, backgroundColor='#2A3146')]
[Frame(factoryClass="screens.Preloader")]
public class MainClass extends Sprite
Then in the Preloader class when all is loaded:
        private function onLoaded():void
         this.nextFrame();
         var mainClass:Class = Class(getDefinitionByName("MainClass"));
         if(mainClass)
             app = new mainClass();
             addChild(app as DisplayObject);
            app.start();
In the holder swf it does something like this to load the swf:
            gameLoader = new Loader();
            gameLoader.load(new URLRequest(gamepath));
            gameLoader.contentLoaderInfo.addEventListener(Event.INIT, onGameLoadStart);
            gameLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, onError);
        private function onGameLoadStart(e:Event):void
            preloader = gameLoader.content;
            addChildAt(preloader,0);
I thought this was the to do a "export classes in frame 2" kind of thing in an actionscript project, and it works great on its own but not when loaded inside another swf. Is there something I'm missing?
I know I could just built a preloader in the holder swf, but the holder swf is loading in games that all have a unique style on thier own and the games' preloaders all dipict its games style.
Thanks.

You were right. It was the Loader not having the size. After your post I checked the to see if the server was serving with the right mimetype and with no g-zip compression. Everything was in in correct order. Then I checked from my connection at home and everything is loading as intended. Come t find out its something with our firewall. When checking from work and the swfs are on a server outside our firewall the total bytes are unknown. If they are on a server within our firewall they are fine. (Most problematic in Webkit browsers). So I guess i was going about it the right way. Thanks for your help.

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

How to export a flash project with a changing frame rate to a video

I have a Flash project that is a series of roughly 1000 images. The result of the images is a simple animation, and there is music imported on a separate layer.
There are moments in the music that I wanted to line up with certain frame changes, and there are sections of the music that I wanted to match up with a faster (double-time) frame rate.
I used this code in several places in the a code layer:
stage.frameRate = x;
The result is exactly what I want in SWF -- the animation speeds up and slows down at the exact right moments to match up with the music track, but it seems like it's just not possible to export this variable frame rate project to a video file?
According to the accepted answer on this post: http://forums.adobe.com/message/4019538, it seems that:
The export function in Flash Pro doesn't transcribe *frames*, rather it plays the Flash animation and records it like a camcorder
If that's true, then I would think there is a way to record a variable frame rate project into a video -- does anybody know if this is possible?

That or Premiere would both get the job done. After Effects might be more desirable as it has a feature called Time Remapping (right-click on the video layer, Time->Enable Time Remapping). You can add keyframes to any point in a video and then drag them around to speed up or slow down the video. That'll allow for very precise tweaks.
Finally all I'd suggest is when you jump into your next project, make a quick dummy test project to see if the software you're using is easily capable of producing what you want. It'll solve the headache of completing the project only to land where you are now. Now you know Flash won't play nicely with scripts and Export Movie. If your desired end result was always a video I'd probably use video editing software to make the video. There's some free stuff out there if you really look, but no, it won't be as nice as After Effects or Premiere by any stretch. Although when you see how amazing After Effects is, you'll probably want to buy it .

Arch Linux on SmartQ (V5II) -looking to start project-

Upfront I will note that I am not skilled enough to accomplish this alone at my current level. I will learn what I can in order to achieve this task, so any and all links to tutorials and ideas on how to get this working will be taken and put through heavy consideration. Primary concern will be getting a working "livecd" cloned image (basically, all the most standard core packages to get a working Arch Linux with USB Keyboard and mouse support, then build from there till I get X and all the nice features of the V5(II) working, and branch out from there Will probably look into repartitioning the NAND so I can have a complete and full install (probably preserve Android for being boot from SD, which is fine since it's a complete dual-boot which requires rebooting to switch anyway) As of now, I am referencing the development tutorial for SmartQ, tutorials for building firmware images from plugapps (nice Arch port to ARM devices) and whatever information I can gather from someone on the Arch Linux forums who has recently ported it to the newest ARM processor type (v7, if I'm not mistaken). All links will be provided at the bottom of this post.
My guess is that I will have to approach this with a "Linux From Scratch" mindset of compiling the kernel, busybox and whatever else I need to get a working base install (which, from there, I can compile everything else natively on the actual device)to the point where I reach a working system with gui, basic tools, maybe a game or two, and whatever else would constitute being enough for "firmware" status. I guess, my only question ahead of all that is how do I go about making the "base install" firmware to build up from? Secondary question to that is, once I get a nice setup, how do I take that (all being on the actual V5II) and remaster THAT into a firmware that I can then post online for others to test? I already have my homework cut out for me, so I'll be reading what i can to figure this out while anybody and everybody here throws me tutorial links and ideas on how I can accomplish this each step of the way... We shall see where this train takes us.
SmartQ Linux Development Guild: https://docs.google.com/View?id=ddtx8wk … skpm&pli=1
PlugApps Development Portal: http://www.plugapps.com/index.php5?titl … evelopment
Arch Forum post for developer who ported Arch Linux to the v7 ARM processor: https://bbs.archlinux.org/viewtopic.php?id=59638
can't think of anything else at this point, but I will categorize links the best I can to morph them into somewhat of a workflow process and group the help aids to each relevant step along the way. Anyone interested in helping, feel free to join in on the fun.. Will be looking that the ArchMobile stuff and incorporating what I can into my project... maybe this will help revive the ArchMobile project as well...

If you are a new programmer then Python is a good place to start. Install WingIDE 101 from the AUR for a good beginner's IDE for that.
Think Python is a free book to get started with (PDF or HTML download on that page and you can buy the dead tree if you want)
If you want to do programming that requires fast code above all else then C++ is the standard. Code::Blocks is a good IDE for that. Be sure to install "base-devel" and "gdb" to go along with it.
Programming - Principles and Practice Using C++ is a dead tree book for C++, you have to buy it but that is offset by the fact that its author is also the author of the C++ language.

Start project on a particular frame?

Similar Messages

Maybe you are looking for