Start up delay problem..

After switching on my laptop the company's logo appears and then a black screen which remains for at least 4-5 minutes.After that welcome screen appears.Please help me solve the problem.......

In order to diagnose your problem we need to run Windows performance toolkit the instructions for which can be found in this
wiki
If you have any questions feel free to ask
Please run the trace when you are experiencing the problem
Please use the "boot" configuration and save all open work as this will reboot your computer.
Wanikiya and Dyami--Team Zigzag

Similar Messages

Why is Start Trigger Delay not applicable?

Hardware: PCI 6602
Driver: DAQmx 7.4
Programming Environment: ANSI C
Hello All,
I'm setting up a counter output pulse generation task which is to have a start trigger. To be specific, it is a digital edge start trigger (not an arm start trigger) which I plan to use in retriggerable mode so as to get a single output pulse of specified width for every trigger edge. Currently I'm baffled as to why the Start Trigger Delay and Start Trigger Delay Units properties do not seem to apply - whenever I try to access them I get an error message saying they're not applicable to the task. The other properties of interest - Source Terminal, Active Edge, and Retriggerable - can be accessed and modified without any problems. I don't actually need the delay but am curious to know why it doesn't apply in this case. Thanks in advance.
Jeff

Hey Jeff-
You will need to make sure that you don't stop the task at any point after the first generation. Most of the examples use DAQmxWaitUntilTaskDone() to wait for a single iteration, but in your case you want to run through several iterations of the task. So, you will want to enter a loop after starting to ensure that the task continues to run in the background on the hardware. I modified the single pulse DAQmx shipping example to include digital retriggerable start triggering. The empty loop spinning is obviously not ideal, so I'll leave you the choice to implement that as necessary.
Since you're working with retriggerable single pulses, you may also want to be aware of the information in this KB.
Hopefully this helps-
Tom W
National Instruments
Attachments:
DigPulse.c ‏4 KB

RE: Forte Start up Delay

Sean,
It may be because of the fact that your launch server is pulling down the
latest version of your installed partitions. I think we have the same
problem, and there are 2 ways of dealing with this. 1. Run the development
workshop using ftexec and not use launch server. 2. Put all the developers
into a model node that does not have any applicaitons installed into this.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: [email protected] [SMTP:[email protected]]
Sent: Monday, June 29, 1998 11:41 PM
To: Venkat Kodumudi
Subject: Forte Start up Delay
To: [email protected] @ Internet
cc:
From: [email protected] @ Internet
Date: 06/29/98 08:27:27 PM PDT
Subject: Forte Start up Delay
Hi all:
We've been experiencing something interesting
lately.
On a HP K9000 system and a DEC AlphaServer 800
system, the Forte Workshop window startup takes
estimated 75 seconds of delay.
It means, after forte printed out the usual
"Attemping to connect to Launch Server.....
Running release cl0 of applet Forte....... "
messages, it will wait about 75 seconds for
the Workshop window to show up.
If one workshop window is up and running, any subsequence
Forte Workshop window will show up immediately.
After closed all the Forte Windows, the delay will happen
again.
We figured it might have something to do with the network
setup, but we couldn't solve this problem.
Anybody have experienced the same problem?
Thanks in advance for any clues.
Sean
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Greg,
Thanks for the suggestion. It's really cool. I hope that I have your
suggestion earlier because we have all our client using the launcher to
start our application now. In fact, we divided up our application functions
into applets and have our own customized "launcher distributed" as a sort-of
menu ( which provides the access control ). Changing back to use ftexec -fi
.. would be a major modification. I just hope that Forte has some way to
cheat the "b-tree" so that we can download the applet ourselves ( using some
other media such as FTP, compression, floppy etc ) and update the "b-tree"
later.
Regards,
Peter Sham.
Hutchison Telecom. (Hong Kong).
-----Original Message-----
From: Greg Nyberg [SMTP:[email protected]]
Sent: 1998 07 02 13:12
To: 'Peter Sham (HTHK - Assistant Manager - Software
Development, IITB)'
Subject: RE: Forte Start up Delay
We dont use the launcher to upgrade applications.. We use a c
program
which is actually the program run when they doubleclick on the icon.
This program checks on an FTP server (sortof) to see if there is a
more
recent version, downloads the new version (which is really a
self-extracting self-installing InstallShield program) and installs
it.
The c program then starts Forte using ftexec -fi ... technique.
We have users all over the world, including a number of hotels in
the
Far East using a dial-up TCP/IP connection. With compression, etc,
we
get the size of the file down to about 2MB which takes like 30
minutes
for them to download when we need to upgrade.
Write me if you want more info.
-Greg
> -----Original Message-----
> From: Peter Sham (HTHK - Assistant Manager - Software Development,
> IITB) [SMTP:[email protected]]
> Sent: Wednesday, July 01, 1998 11:16 PM
> To: Venkat Kodumudi
> Cc: '[email protected]'; '[email protected]'
> Subject: RE: Forte Start up Delay
>
> Hi Guys,
>
> Isn't it frustrating! We have the same problem on this "pulling
down
> the
> latest version" feature on our production environment. We have
now
> about
> 100M of applets and some PC is connected back to our computer
center
> through
> some license line. Downloading all the applets means
out-of-business
> for
> the whole morning. Up-grading the license line means increasing
> operating
> cost due to IT department inefficiency. So we can just prey that
no
> PC
> crash on her hard disk, no btree will be corrupted or our user
> wouldn't do
> any funny things on his/her files, otherwise, reloading the whole
> application means nightmare. Worst of all, we can't put our
> application on
> the file server. Is there any way out? Does anyone has a
solution?
>
> Regards,
> Peter Sham.
> Hutchison Telecom. (Hong Kong)
>
> -----Original Message-----
> From: Venkat Kodumudi [SMTP:[email protected]]
> Sent: 1998 06 30 21:09
> To: '[email protected]'
> Cc: '[email protected]'
> Subject: RE: Forte Start up Delay
>
> Sean,
>
> It may be because of the fact that your launch server is
pulling
> down the
> latest version of your installed partitions. I think we have
the
> same
> problem, and there are 2 ways of dealing with this. 1. Run
the
> development
> workshop using ftexec and not use launch server. 2. Put all
the
> developers
> into a model node that does not have any applicaitons
installed
> into
> this.
>
> Venkat Kodumudi
> Price Waterhouse LLP
> Internet: [email protected]
> Internet2: [email protected]
>
> > -----Original Message-----
> > From: [email protected]
> [SMTP:[email protected].
> com]
> > Sent: Monday, June 29, 1998 11:41 PM
> > To: Venkat Kodumudi
> > Subject: Forte Start up Delay
> >
> > To: [email protected] @ Internet
> > cc:
> > From: [email protected] @ Internet
> > Date: 06/29/98 08:27:27 PM PDT
> > Subject: Forte Start up Delay
> >
> > Hi all:
> >
> > We've been experiencing something interesting
> > lately.
> >
> > On a HP K9000 system and a DEC AlphaServer 800
> > system, the Forte Workshop window startup takes
> > estimated 75 seconds of delay.
> >
> > It means, after forte printed out the usual
> >
> > "Attemping to connect to Launch Server.....
> > Running release cl0 of applet Forte....... "
> >
> > messages, it will wait about 75 seconds for
> > the Workshop window to show up.
> >
> > If one workshop window is up and running, any subsequence
> > Forte Workshop window will show up immediately.
> >
> > After closed all the Forte Windows, the delay will happen
> > again.
> >
> > We figured it might have something to do with the network
> > setup, but we couldn't solve this problem.
> >
> > Anybody have experienced the same problem?
> >
> > Thanks in advance for any clues.
> >
> > Sean
> >
> >
> >
> >
> > -
> > To unsubscribe, email '[email protected]' with
> > 'unsubscribe forte-users' as the body of the message.
> > Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
> -
> To unsubscribe, email '[email protected]' with
> 'unsubscribe forte-users' as the body of the message.
> Searchable thread archive
> <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

[Fwd: Starting Managed server problem ......]

Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

Hello Satya/All,
I'm also experiencing the exact problem you are facing. It would be great if
somebody could help in this regard at the earliest.
Thanks, senthil
Satya Ghattu <[email protected]> wrote:
Forwarding to the security news group...
-------- Original Message --------
Subject: Starting Managed server problem ......
Date: 1 Jun 2004 23:02:53 -0700
From: Sameer <barsatkiraat2001>
Newsgroups: weblogic.developer.interest.management
Hi All,
I need you guy's help in this regard, that I am using solaris 8 and
installed Weblogic8.1 Server.
My Scenario is;
Have configured Admin Server and Managed server with nodemanager on one
unix machine.
So, what am facing the problem;
I am not able to get run Managed server after starting the nodemanager
and admin server, getting the error in nodemanager logs that is :
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090482>
<BAD_CERTIFICATE alert was received from PortalQA - 10.12.10.94. Check
the peer to determine why it rejected the certificate chain (trusted
CA
configuration, hostname verification). SSL debug tracing may be required
to determine the exact reason the certificate was rejected.>
And in Admin Server logs it's saying;
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <Security> <BEA-090504>
<Certificate chain received from PortalQA - 10.12.10.94 failed hostname
verification check. Certificate contained AdminQA but check expected
PortalQA>
The WebLogic Server did not start up properly.
Exception raised:
'weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.'
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Warning> <NodeManager> <BEA-300038>
<The node manager is unable to monitor this server. Could not create
an
SSL connection to the node manager. Reason :
[Security:090504]Certificate chain received from PortalQA - 10.12.10.94
failed hostname verification check. Certificate contained AdminQA but
check expected PortalQA>
Reason: weblogic.management.configuration.ConfigurationException: Due
to
faulty SSL configuration, this server is unable to establish a
connection to the node manager.
<Jun 2, 2004 9:44:26 AM GMT 04:00> <Emergency> <WebLogicServer>
<BEA-000342> <Unable to initialize the server:
weblogic.management.configuration.ConfigurationException: Due to faulty
SSL configuration, this server is unable to establish a connection to
the node manager.>
If some one can help me, I do appreciate in all due respect.
Sameer.

PSE 7+ Sudden Animation Time Delay problem?

I've been using Photoshop Elements 7+ for a long time now. And I've been able to make animations with it. Such as can bee seen on this url: http://i47.tinypic.com/35iumww.gif I know how to change the Time/Frame delay settings quite fine. But as of today my time delay hasn't been working. This is quite random considering I haven't done any kind of updating or editing to the program in general. When trying to set the time delay to 0.15 and clicking the preview button, I find that my animation is as at the default number's speed, 2. Upon changing the time delay many different times, from 0 to 10 (the min and the max), the animation's speed still doesn't change. I'm at the end of my rope with this and none of my PSE educationed associates know what could possibly be wrong. I did download two fonts today, but that's it. So unless someone might be able to figure out what's changed, then I might have to try and re-install the program. Something I don't want to do. I have a visual if that's of any help.
http://i47.tinypic.com/e9w64k.png
Also, I am using a Mac.

Which version are you using now? You can't be using PSE 7 on a mac, because there is no PSE 7 for mac. The frame delay problem exists in the mac versions 6 through 10. You can either upgrade to PSE 11 or use a program like the free giffun from stone.com to assemble the gif and set the frame rate.

What I've noticed about the Video Delay Problem of...

I was able to take a look at my old vids from way back V110. I've noticed everytime they improved the camera pictures, the video & audio sync suffer. My old videos didn't have audio delay problems even if they were more than a minute long.

I ordered 2 iPhone 4's from the AT&T Premier site on July 9 (my company has an agreement with AT&T). My credit card company immediately flagged the purchase as possible fraud, so it took a day or two to clear that up. The order went to "Processing" status on the AT&T Premier site on July 12. It stayed in that status until yesterday, July 20, when it changed to a status of "Shipped" and I got an email from AT&T with the FedEx tracking number. FedEx says that the phones shipped from Texas yesterday night and are on schedule to be delivered to me in Connecticut today (July 21). That's only 8 business days and includes the screw up from my credit card company - better than I expected. The "Processing" time probably included the time it took to ship the phones from Apple's factory in China to the AT&T facility in Texas.
By the way, here's the deal I got from AT&T Premier:
$38.50 - 550 shared minute plan (1st iPhone)
$ 9.99 - Additional line (2nd iPhone)
$19.25 - 2Gb personal data (1st iPhone)
$19.25 - 2Gb personal data (2nd iPhone)
$ 0.00 - pay as you go texting

MY macbook pro is slow to start up after log in. any suggestions on where to start addressing the problem?

MY macbook pro is slow to start up after log in. any suggestions on where to start addressing the problem?

Delete any items in System Preferences > Users & Groups (or Accounts) > Login Items
Same for HD > Library > StartupItems
Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon on your Deskop.
Click Get Info. In the Get Info window you will see Capacity and Available.
Make sure there's a minimum of 15% free disk space.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Oh wow, looks like a new feature.
The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
'''''Edit: Please skip the rest of this post and check out the next one.'''''
There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
First, copy the following code to the clipboard (it's all one long line):
 javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
Now, when you want to tweak the image display, click the button to run the script.
Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

HT6114 Delaying problem when switching desktop

After upgrading to Mavericks v10.9.2 Update my "Macbook pro Retina, 15-inch, Early 2013" is delaying when switching desktops or switching to mission control. An overall delay problems occured. I need help!

First off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark

I seriously don't know what caused this to start being a problem until today it worked fine, but I added an exception for popups full question in DETAILS

is there anyway to allow Firefox to allow pop ups from this 1 page of Facebook / well this 1 game https://apps.facebook.com/vampiresdarkside/ and not the entire pan in the Ass Pop up happy site, I cant see any sense in allowing popups from all
apps.facebook.com
and when I try to add it as the exception should be your program edits it to be that crap above instead of the exception I entered specifically,
apps.facebook.com/vampiresdarkside/
I seriously don't know what caused this to start being a problem until today it worked fine, but I added an exception for popups from this one site in Chrome and Firefox decided it wouldn't allow it popups from this part of Facebook and no I am not allowing all the FB apps to have popups I never had to before
apps.facebook.com/vampiresdarkside/
have popups after adding the popup exception in chrome, and no I did nothing to Firefox but it is kinda asking me to switch to Opera or some other crap browser with it acting like this, I modified the exception in chrome and Firefox now wont allow the pop ups it always had up until chrome allowed them WTF

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going

I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going to get a refurbished phone in place of my brand new phone which I just bought. The idea of a used phone repulses me. Any solutions ?

sumeshdua wrote:
The idea of a used phone repulses me.
Why? Your current phone is used... it has been since the instant it was removed from the shrink wrap and turned on.
sumeshdua wrote:
Any solutions ?
Live with the phone as is.
Take the device to Apple for evaluation... it may not need replacement.
Even if it does, neither you or the Apple tech should be able to tell if the replacement is new or refurbished.

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

Start up delay problem..

Similar Messages

Maybe you are looking for