Start-Up Items Question!!!???
in library/system/library/startupitems
I have
Apache, Appleshare, AppServices, AuthServer, CrashReporter, Disk, FibreChannel, IFCStart, IPServices, Metadata, NetworkTime, NFS, NIS, Printing Services, RemoteDesktopAgent,SNMP
Which of these are important and which ones can i delete out of the startup items area??
Greenmymac,
All are important, and none should be deleted.
It is a grave mistake to mess with any items in the system library.
If you must make room on your startup disk, check the recommendations listed in Freeing space on your Mac OS X startup disk, by Dr. Smoke.
;~)
Similar Messages
-
HI all
Pardon me for the stupid title - -been some time since on the forum
This is much better.
So the situation on son's Mac Book Pro.
It seems a few days ago the computer would not take a CD - -not huge deal
Then suddenly he had trouble.
Turned on computer and get the folder with the ? I am pretty certain this means it
can't find the start-up items.
I guess he tried to do some "diagnostics on the internet - it was a Hardware diag.
and said everything was OK but couldn't find a HD
So he bought a new HD and we just installed it. Start tje computer and the same question in folder.
He bought the HD from apple so not an aftermarket.
I guess he is not sure where is start-up disks our (kids) but what can we do now?
He is at our house now and can't seem to connect to the internet becuase he can't see my network
which is wireless.
Is there something we can try - -should we re-install the old HD - -the new one may not be formatted
not sure all we know is it was from Apple direct.
He just told me the OLD hard drive could be read by a device at school. So it seems perhpas the HD MAY? be
OK but there is some sort of communication thing going on.
In the old dayson my G-3 slot - -we would start up with a network
Not sure how do do any of that on this book
PLease help - - very important (he is a grad student and needs the computer that is why he paid for
on day shipping
What do we do? Any tips tricks?\ please offer any ideas - -dad is stuck - -Thanks
JimHello Grant - -Thanks - -
I notice you are west of Boston - -we in Medford and son goes to Tufts in town
(small world)
Not really certain what you are telling us - - I am not good at computers
A couple of other things that may be tips - -
1 - on wednesday of this week
our son noticed the fan was going on almost continuosly,
After that trouble started - -
2. - When we put the new HD in - -same things happened,
which is ? mark in folder (start-up items)
3. - His computer will not see my wireless even if I put it next to my I-mac
It sees several networks but not mine - -and if we type in my netwokr
info - -it will not take. He wanted to try a network start-up .
I forget how that is done.
4, - The bottom of the computer is getting hot - -much hotter than i think it should.
any ideas why his computer won't see my router?
I think he may just have to take it to Apple Store on Newbury Street.
Would they be able to get his info off the old HD assuming it is still good and
transfer to the new HD fairly easy.
LAstly - - I am pretty certain I have the str-up disks for my I-mac which is running
10.5.8.
Would I be able to do anything with my computer and hook into his computer
into mine like an external device or something like that
I really appreciate your thoughts and efforts on this and must admit I have no
external enclosrure? but I have an external HD on my I-mac
As you can tell - -I am not to good at this
Thanks from Meffa (lol0 Jim the father -
2013 workflow does not start on item created by a different worklow
hi :)
i have spd created reusable workflow 2010 on a list A creating an item in a list B.
on that list - B - there is a 2013 spd reusable workflow which is supposed to start on item created but does not.
the workflow does start manually.
and it does start when I create an item manually.
if i check a 2010 wf on the same scenario - it starts o.k.
the item "created by" is the user who triggered the workflow - not the system account.
anyone??
thanks !The first thing I'd ask is if the workflow on list b is set to trigger when a new item is created. If this has been set correctly, I'd try running the step within Workflow A which creates the list items under an impersonation step. This subs
in the account details of the workflow author and as such should trigger workflow b.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
After mozbackup restores "certificates" firefox cannot start, other items restore OK
I use Mozbackup to synchronise Firefox from my desktop to my laptop. My laptop's Firefox would not start and displayed a crash reporting dialog.
I completely uninstalled and made a fresh, new install with Beta 19.0.2. I then restored my Mozbackup from my desktop, item by item. When the "Certificates" item was restored, Firefox would not start and display the crash repoting dialog. So now I know that the certificates item is the culprit.
Why does this allow Firefox to start on my desktop but refuses to do so on my laptop?
Thanks a lot! [email protected]I used the Mozbackup file from my desktop, which does not seem to have this probem, to restore all my Firefox settings. I restored the settings category by category until I found the culprit by process of elimination. The "Certificates" item from the backup is the one that prevented Firefox from starting. My question is, why this happens?
-
Hi
We are having SRM5.0.
Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
Contract is created and getting message Contract created.
But when tried to release the contract it shows "Awaiting approval".
In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
What could be the reason. Please let me know the solution if anyone of you come across such error.
Thanks in advance
JagadishMasa
It is maintained as General task already.
It seems the workflow task WS14000085 does not have definition.
When checked in SWDD for the above teask there are no steps defined for that workflow.
SAP says that we need to define and action for workflow WS14000085.
But what is the procedure to define the workflow.
I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
Anyone of you know how to define the workflow and activate the same?
Regards
Jagadish -
Start Menu items/shotcuts and Start Menu search ability on multiple workstations
2/13/2014 our IT department began to receive complaints of missing programs. After investigation of a few users we were able to determine that the programs existed but all shortcuts and items from the start menu had been completely removed. In addition the
searching feature of the start menu was not functional. This happened to about 90% of our environment and the catalyst seemed to be Windows updates or at least occurred after the auto reboot initiated by Windows Updates. The only items visible in start
menu were items added after the fact, internet explorer, magnifier, command prompt, and notepad. All other items, folders, and the ability to search installed programs or folders were completely removed. However all programs are present in the program files
folders. THe start menu folder in program data was empty except for the aforementioned items. Additionally properties of start menu had all necessary checks in boxes such as search program files and folders etc. Also show hidden items and folders is enabled
for many users so the items were not hidden but gone. And the biggest kicker of all was after a full domain investigation into the issues we found that the majority of our windows server platforms, primarily 2008, were also affected and system restore is unavailable.
This conflicts with our idea that Windows Updates caused this since our servers get their updates on a manual initiated basis by their admins which we have not performed as of yet for this month. This caused me to begin looking at SCCM SCEP as all systems
have System Center Endpoint Protection and received definition updates. Also accessing different user profiles or even a new profile did not make a difference, issue still present.
Due to the enormous inconvenience we sent out a company wide email asking users to perform system restores to get us in a stable state. A system restore to the day before Windows updates (second Wednesday of every month configured by SCCM SCUP) restored
the start menu items.
On a multitude of machines IT performed troubleshooting and system restores recording the changes removed and added. We then, on a healthy machine, started to apply the windows updates and SCEP (antivirus) definitions 1 by 1 with out success of replicating
the issue. Next we performed a system wide antivirus full scan and did not find any viruses. This is obviously not a system criticle issue bringing us down but is a huge concern for us in IT as it happened company wide and caused a large flux of tickets and
some down time for non-technical users. We most definitely want to know the cause and after several days of investigation and troubleshooting Im turning to the Microsoft community for help.
I know I categorized this as a Windows 7 issue and its affecting windows server 2008, 2003, and 7, but I did not see a forum for all windows platforms. Since the majority of affected users are Windows 7 I opened it here.
So to summarize in a bulleted format:
Issue: Wide spread issue affecting around 60-70 users and servers, all profiles, were all start menu items save one or two system defaults were removed. Additionally the searching feature for the start menu looks to be broken as programs
exist in program files and are unsearchable from start menu. IT was also affected and I remain affected until I find the cause.
Investigation and Troubleshooting:
Start menu properties: nothing has changed and search options are enabled.
Missing items are not hidden, hiding and unhiding does nothing and folder options show hidden files is checked.
Program data start menu location is indeed empty as well as user app data start menu location
No group policy's are in place altering start menu items and no group policy changes were made as of recent
No SCCM packages pushed company wide in last month or pushed individually
Windows Updates occurred on windows 7 machines only before the issue occurred and computers restarted and the issue surfaced
System Center Endpoint Protection Antivirus updates and definitions deployed just before the occurrence with windows updates. SCEP def updates happen on all windows boxes to include servers
Paint.exe was completely missing from system32 folder for some users machines to include my own
System restore to that morning before restarts or previous day fixes the issue for windows 7 users
No windows updates were initiated on any servers
Servers were also affected with windows 7 machines
About half the users affected had corrupt Microsoft Office 2013 Pro Plus Click to Run installations and for some the system restore did not fix this and we had to re-install office for around 10 users
SCEP antivirus did not catch any viruses that could cause this, I performed MBAM scans on a handful of machines and didn't find anything either.
Re-creating start menu shortcuts works
Happened to two of our companies locations NH and MA, all part of the same domain but different LANS of course. Companies are interconnected by MPLS connection.
I combed through SCCM to see if anything deployed and found nothing. Currently I have SCUP updates and SCEP updates disabled. I will post a list of Windows Updates that occurred when the issue occurred as well as the SCEP updates. I have read all the threads
about this types of issues and tried all steps without success. Googling the issue also did not rear results.
MichaelSpauldingHi,
I would like to suggest you try these steps to figure out what could be causing this problem.
1. Run Troubleshooter
Open the Search and Indexing troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Search-and-Indexing-troubleshooter
2. Create a new library and include fewer folders for test purpose. Now search for a file from that folder. See if it works.
Create a new library
http://windows.microsoft.com/en-US/windows7/Create-a-new-library
3. Try to rebuild search indexing. Refer the steps from the following article.
http://windows.microsoft.com/en-US/windows7/Change-advanced-indexing-options
Also you may use the System File Checker tool (SFC.exe) to check the issue. The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
http://support.microsoft.com/kb/929833
In addition, you may refer to the following Microsoft TechNet article for the Windows Search related Group Policies.
Group Policy for Windows Search
http://technet.microsoft.com/en-us/library/cc732491(WS.10).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
this is a weird start to my question; but i went to a music festival today and I was in a mosh pit and it was hot, and my iPhone 4 turned off and I was wondering weather it was from the heat or something else? And what I could do to fix it? Thankyou
okay, thankyou for you help anyway
-
I recently upgraded my OS from 10.4.11 to 10.6.8, so that I could download iTunes to my new iPhone 5. After upgrading to 10.6.8, I received error message about my Symantec Norton anti-virus security, so I upgraded that to security that's compatible with 10.6.8. Now I receive the error message above, about my Start-Up Items folder. There are currently no items in the folder. How do I get rid of the error message above? Thanks for any help.
Hello,
Resolution:
To prevent the "Insecure Startup Items folder detected" message from appearing
Open Disk Utility from /Applications/Utilities.
Select the name of the volume where Mac OS X is installed (default name is "Macintosh HD").
Click the Repair Disk Permissions button.
After permissions repair is complete, restart Mac OS X and verify that the message no longer appears.
http://support.apple.com/kb/TS3493?viewlocale=en_US -
Create Stop and Start Table item using HTMLDB_ITEM - APEX 2.2.0
Hi, all,
I guess the subject says it all. How can I create a Stop and Start Table item using HTMLDB_ITEM? I think I can just output "< /table >< table>", but I'd like to use the built-in function if there is one, in case the way tables are rendered were to change, or in case my thinking is wrong, which is always possible ; - )
Thanks, for this and for all of your help!Don, there is no function provided for this.
Scott -
Sharepoint 2013 workflow does not start when item is created by another workflow
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when
de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when de workflow
in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that
creates a new item in List B. The problem is that when de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?Hi Courfeyrak,
Here is another similar post with a workaround, you can try using the event receiver on listB item to start the workflow, when the listB item is created or updated by the workflow associated with listA.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/19f71e38-7c04-430e-aa6b-764cbbf18c1c/2013-workflow-does-not-start-on-item-created-by-a-different-worklow?forum=sharepointcustomization
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support -
Start Up Items (Listed on System Profiler)
Hi,
I have two macs. My Mac Mini is running on Tiger and MBP on Leopard. The Mini has 16 "start up items" listed on the systems profiler that I have no item what they do. My MBP only has 4.
How do I identify necessary from unnecessary start up items?
I would like to remove the items I do not need. (Faster start up and possible hacker crap).
Thank you....This are the listed Start Up Items. Do you see any problemware?
Adobe Version Cue
Apache
Apple Share
AppServices
AuthServer
CrashReporter
Disks
FibreChannel
IFCStart
IPService
Metadata
NetworkTime
NFS
PrintingServices
Virex -
Our school has a lab of 35 new Intel Macs. Some have begun to have programs start when the computer is booted up. Not all the programs are the same. I have checked the accounts for start up items and there is nothing in the list. How can I stop programs from starting upon start up of the computers?
Could any of the students downloaded some 3rd party software. Some, known as APEs, modify the BSD part of the OS and can cause odd problems.
If the items are in the Dock, be sure that "Open at Login" is not checked. I don't know if they all would appear in the user login area.
As another test, create a new user on one of the machines and don't let anyone know the password.
See if the problem exists with the new user.
Check the download folder for any odd programs as well as the download window in Safari.
I suspect that this is related to student's installing programs.
Be sure that none of the computers give the students Admin permission. All student user privileges should be minimal, certainly not administrator. They should not have the ability to install software. -
For some really all the programs I had running when I log out/shut down start up again immediately when I login in/reboot. It's kinda annoying because it really slows things down when I first boot up. Is there a way to set it up so that just my start up items are the ones that start up? Thanks in advance.
captfred wrote:
It's on by default.
Yes, so unfortunately you'll have to remember to do it every time.
Until someone with a bit of intelligence knocks some heads together at Apple, and changes it to off by default.
Five minutes' work for somebody. I hope they do it soon. -
Can't make start up items disappearing
Hi,
Everytime i start leopard there are two things starting automatically. I can't figure out how to make them not starting:
1 Finder opens some path on idisk, always the same path, though it wasn't there at last shut down
2 Automator want me to create a new project. Since I once opened Automator it comes back at every start up..
There is nothing in my start up items list nor in administrators account that have to do something with these applications.
Kind regardsTry starting in "Safe Mode" (It will take more time to startup in Safe Mode because it runs a directory check.)
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
-mj -
WCS11G - Start Menu Items for Admin interface?
I'm looking into WCS 11G since I need to migrate a 7.5.5 site.
As it looks now, code or structure won't be modified to better support features such as supporting the contributor interface better so a lot of our users will expect to use the admin interface.
I am however having an issue enabling simple start menu items for content. I.e. a simple Start Menu Item for a Page, simply will not show up. It shows up just fine in the contributor interface however.
I've been going through all the documentation, but I cannot see any references to there being any limits on what kind of assets can be presented in the admin interface.
Is this a bug I'm experiencing? Or simply an approach taken to force users over to the contributor interface?
Thanks
/LarsBy default the Admin UI will not show certain asset types, this is intentional and controlled by the property advancedUI.enableAssetForms in futuretense_xcel.ini. If you set this to true and restart then the Page assets and others will show up. Here's an extract from the Property Files Reference Guide:
advancedUI.enableAssetForms
Used to enable and disable the WebCenter Sites
Admin interface for content contributors. Access
to the following assets is affected:
• All flex assets and their parent assets
• All basic assets
• Engage assets, such as recommendations,
segments and promotions
• Query, Collection, and Page assets
By default, this property is set to false, which
disables the WebCenter Sites Admin interface for
content contributors. The assets listed above
cannot be created, edited, searched for, or deleted,
except from the WebCenter Sites Contributor
interface, where they are supported by default.
Note: In the Contributor interface, asset types and
assets intended for developers are either available
only for inspection or they are inaccessible. They
must be accessed from the WebCenter Sites
Admin interface. For a comparison of features in
the Contributor and Admin interfaces, see the
WebCenter Sites User’s Guide.
Default value: false
Phil
Maybe you are looking for
-
Scanning hp laserjet pro mfp m125nw macos 10.9.4
Hi guys! I've just bought a new hp laserjet pro mfp m125nw and I can't scan from the HP Utility tool. Although there are no problems to scan from the Preview prog as well as from scanner program from Printers&Scans (in Sys. preferences). Thank you fo
-
Verizon Wireless has the absolute worst customer service I have ever received. The in store reps are unprofessional and spend more time texting and taking personal cell phone calls than in helping customers. They are not at all knowledgeable and ev
-
Bookmarks in webhelp generated from Framemaker
Hi all We're using the trial version of Framemaker 12 as part of the TCS5 suite. I've been experimenting with the Publish pod to create WebHelp and am wondering how to specify which Framemaker headings appear in the Webhelp TOC? I thought it might us
-
I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one..
-
Several programs are running at Startup
Hi Everyone, I truly need your assistance as I am a novice to the internal workings (system Admin) of the computer (Windows 7). My computer is performing terribly and when I check the "troubleshoot" system it tells me that "SEVERAL PROGRAMS ARE RUNNI