Started same Process Chain automatically several times

Hi BW Experts,
could you help me, please?
I don't know, how I started the same Process Chain automatically again.
I have a following easily process chain as a example:
1. Start Process
2. DTP
3. DSO Acitvated
I have the idea to insert the process 4. "Abap program" to start the function module "RSPC_API_START_CHAIN" again. But their are any problems......
Have you another idea?
Thank you and regards.
Volker

Hi,
Are u sing the Direct DTP or the normal DTP's?
If u are using the normal DTP then u need change the process in ur PC..
Start Process
Infopackge load till PSA
DTP to load data to DSO
Activation of DSO
... U can also add the ABAP process as per requirement .. there wont be any issues in that..
thanks
Assign points if this helps

Similar Messages

Start BW process chain automatically after FPBW or FPCIBW is finished

Dear SAP Experts,
we would lilke to setup our process chains in BW, so they start automatically, after FI-CA mass activities (PFBW or FPCIBW) are finished in source system IS-U.
In fact, I know the process behind this, according to SAP note 135637, so
(1) Create an event in the BW system
(2) Create a function module in the BW system
(3) Create an ABAP/4 report in the R/3 System
As we have more process chains in BW, one for FI-CA open items, second for closed items, another one for sales statistics, I suppose there are different events in source system for every type of job as well, so when FPBW is finished, FPCIBW, when sales statistics processing is finished in source system etc..
My question is, which event is triggered after the job in IS-U (FPBW, FPCIBW) is finished?
Btw, I found implementation of function module FKJO_EVENT_1905, where I_ID LIKE DFK_JC_CNTR-ID was checked, but I don't know if this is for all jobs in source system, or only specific jobs..
Thanks and regards,
Peter

Hi, Carlo!
We were encountered the same problem in our project in the end of April. We wrote message to SAP, and still waiting when our customer provide access to supprot team for SAP system.

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Process Chain takes alonf time to run

Hello All,
We have a process chain which loads data for texts, attributes etc.
On certain days the process chain will run extremely fast and maybe take a couple of hours, other days the same process chain may take 24 hours to run. It appears to get stuck when extracting the data from our source system.
Is there any reason for these strange performance issues and does any body else have the same problem? Is there anything that can be done about it?
Thanks,
Nick.

Hi Nick,
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
It is a system error which can be seen under the Status tab in the Job Over View.
Cheers
Raj

Schedule the Process Chain automatically in BW

Hi SDN Guru's,
I have an urgent requirement in BW. I want to run the Process Chain automatically in BW when the job for the deltas in R/3 are completed.
I know that in BW we can trigger the process chain by the background job only by giving the date and time or after the event and after the job.
But my requirement is the process chain should automatically be triggered in BW once the R/3 delta job is run and completed and the delta records are updated in RSA7.
Can any body please let me know how we can do this as this is the urgent requirement for me.
Please let me know how and where we need to write the code or make the settings for satisfying my requirement.
Thanks & Regards,
Vamshi Krishna.

HI Vamshi:
Take a look at note 409239.
Thanks for any points you choose to assign (points are the way of saying "thanks" in SDN)
Best Regards -
Ron Silberstein
SAP

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Unable to start the process chain

Hi ,
I am trying to start a process chain manually , but it gives me a message saying process has no predecesssor ?
what should be done to start the chain?

Did you copy processes from another chain? Sometimes when this happens, you end up copying all the processes.
First, remove the process chain from scheduling. In RSPC, at the top, select Process Chain --> Remove from Schedule. This will delete all the batch jobs for the process chain.
Next, move all the processes in the process chain with your mouse. Sometimes the maintenance will put one process on top of another so you cannot see them all. By moving all the processes, you may find the "unattached" process so you can remove it from the process chain.
Hope it helps..

Process Chain for Real Time Demon

Please help I am stuck I followed the step by sdn but this is missing in step. how to create now process chain.
I created the below
DSO CONNECTED TO dATASOURCE via Trans,
Real Time IP
Real Time DTP
assigned to Datasource and assigned the DS, IP, DTP to Deamon in RSRDA. NOW I started also manually via start all IP. but How to set the process chains now.
PLEASE HELP ME STEP BY STEP TO PROCESS CHAIN SINCE i am new to this daemon in process chains
Thanks
Soniya
null

Hi
refer to this
CREATION OF PROCESS CHAINS
Process chains are used to automated the loading process.
Will be used in all applications as you cannot schedule hundreds of infopackages manually and daily.
Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

Process chain taking long time to complete

Hi,
I am having following issues in the process chain daily loads
1) The PSA deletion is taking very long time on fridays only (nearly 3 hrs). Other days it gets deleted in 1 hr max.
2) Just to load 381 records via dtp from DSO to cube takes nearly 2 hrs(Delta load). No major routines are written in the transformation.
How to analyse a process in process chain which does not fail, but takes very long time to complete. Is there any tool or transaction in BW which can help us to analyse why the process chain takes so long time to complete in different days. One day it completes in 8 hrs, another day it takes 12 hrs.
None of the transactions, SM37, SM50, SLG1, LOGS etc are giving me any help to analyse this issue.
If it fails we have error logs to check and analyse, but without failing how we can analyse and fix the delay and reduce the time of loading data. Please guide me.
Thanks in advance.
Vishwanath

Hi.......
1) This might be due to the poor performance of the system ..there wont be enoughwork processes avilabe in teh system .- What needs to be done if it does not have enough work processes available. Though I can find that lots of dialog processes were free during these jobs as well some Background processes were also free.?
Look to increase Work Process.......................u can do two things..............U can cancel some Job...........which r not progressing...........or which r not very important for the time being..........
Or if possible........u can increase number of servers..........
Look When a Job will start...............first it will run in background.............u can start in in Dialog also..........but for Dialogue after some time ..load will go to time out.................now many Child jobs will be created for a single background jobs..............they may run in Dialogue..........u can monitor them through SM66............
2) Check ST04 for lock waits and dead locks ..if the same lock persist for long then check with basis team.
What needs to be conveyed to the basis team when these locks happen?
generally these will be temporary Locks.............after some time locks will be realeased..............if they persist for a long time...........then u can contact Basis people..........Or if u can understand that which job is creating the lock.............like if u double click on the job >> click on Job details...............from there u will find the PID................copy that.............and check in ST04..........whether they matches or not..............now suppose it match.............and u know that job is not very important............then u can cancel the job.............
Check also the table space availba in St04 . the usuage should nt be more than 90%
What needs to be conveyed to the basis team if the usage is more than 90%.?
U can ask them to increase the Table space........
Check the sm37 >> delay column it should nt be high
What needs to be done if delay column is high. Actually it is high for these jobs (PSA deletion and load from DSO to Cube visa DTP (Delta load)?
If Delay is more.............it means ...........that there is no free work process...jobs r going to Release state............solution I had already given u.......
Check the PID refeclting in lock waits in sm66 wether they are progressing or nt ..
If they are not progressing what action needs to be taken?
Actually...........suppose one Dialogue job is running............it may change..........ie that Dialogue job will go to Stop status.........some other job will start............anyways if it does'nt progress............u can cacel the JOb.........
Check OS07 for DB if the idle time is less then 20% then its a problem ..
If the Idle time is less than 20% what action needs to be taken?
U can contact the Basis people.......
Check sm21 and RFC connection with other source systems in sm59 ..
What needs to be checked in SM21 and SM59 specifically? What parameter i need to check?
In SM21.............if red status is there............check the Log beside that..............may be it will be some Terminal disconnected.......
In SM59...........clck on test connection..........
if the problem is occuring due to only one source system then check the performance of that system ..
How to check the performance of these systems? Any tools available in R/3 system to check its performance?
No.....in this way u can check performance for all the source system...........go to SM59............double click on the desired source system>> click on test connection......
If All these are persisting then its a performance problem and check with basis team ..
Is there any special settings which needs to be maintained to achieve better performance of Process chain loads?
U can Improve the performance of process chain by Parallel Processing..........ie split the loads by giving selections...........and execute thenm in parallel..........
Regards,
Debjani........

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

Scheduling process chain 3 specific times a day

Hi ,
my requirement is to schedule a process chain 3 times a day.
i have gone through the forum and got the solution EVENTS.
please provide me how to do this in detail like step by step.
how to create a event in SM64 and how we will define the time there.
and creating a ZPROGRAM with the function module (please provide step bystep).
thanks
Sridhar

You create user events in SM62. In SM62, next to "User even names", click on <b>Maintain</b> and press Enter. Click on the Create icon to create a new event (let's call it ZEVENT).
Next, in your process chain, change the Start variant to be scheduled "After event", and put in ZEVENT for the event name. Also, click on the "Periodic job" at the bottom. This will automatically reschedule the jobs for the process chain after it executes.
Next, create an ABAP program (let's call it Z_EVENT_RAISE) to call the function module BP_EVENT_RAISE. You're code can look like this:
REPORT Z_EVENT_RAISE.
PARAMETERS: P_EVENT LIKE TBTCO-EVENTID.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = P_EVENT.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This ABAP program will prompt for an event name, so you will need to create a variant (let's call it ZEVENT) which will save the value of the event name (also ZEVENT). You will need the variant name to be able to trigger the event in a batch job.
Now all you need is the batch job. Use tcode SM36 to create a batch job where you call the ABAP program (Z_EVENT_RAISE) using the variant (ZEVENT).
Note, SM64 only triggers an event manually.
Does this help?
Oh, and you can copy this job to schedule it three times a day.
Message was edited by:
Geo

Process chain total execution time

Hi Experts,
Can you tell me how we can the total execution time taken by the process chain.
Thanks
Suneel

Hi Suneel,
I have understood your requirement : You need start and end timings for each and every run of the chain.
Goto the 1st process type in your process chain - >Right click and click on Display messages - > Go to the chain and copy the variant name from there.(repeat the same for last p.type for end timings of chain)
Now Go to table RSPCPROCESSLOG and insert the Variant name and the date of the chain run.
You will get details of all the runs of that particular chain.
Timings are there in the STARTTIMESTAMP and ENDTIMESTAMP fields.
Timings will not be in the requires format.
It will be like YYYYMMDDTIME.OTHERS
You will have to download it to excel and do some manipulations to take out the digit from 9-14 places.
But I think it will be better b'coz you will have to do that only once.
I have done the same thing in my project as well.
Revert back if you have any problems.
Reward with Points if helpful.
Regards
Hemant Khemani

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Process Chain excessive run time

Hi all
Would like to know if any of you have experienced what we are experiencing.
We have a process chain that runs every night. It is running the same master data which usually only takes seconds.
However, on occassions, the same amount of data is taking over 18 hours to load.
When we look on monitor in the detail tab, it shows that it has only taken seconds but the header tab is showing 18 hours. This then delays any other subsequent process chains from being kicked off.
We are investigating as to why this is happening but any comments would be appreciated.
thanks in advance
Sandra

Hi Sandra,
I can suggest you few things which may help u...
1) Increase the parallel processing during extraction
2) Selective loading.
3) Every job will be having a priority (A, B, C A being the highest and C being the lowest), choose this based on your scenario.
4) Check with basis for the sizing of your server.
5) You can increase the number of background processes during data loads. This can be done by making dialog processes as Background processes.
For this you need basis inputs. (This is done in some profile settings by making the system behave differently during loads. (something like day mode/night mode))
6) There are some maintenance jobs that should run regularly in any SAP box to ensure proper functioning.
7) Use of start routines is preferred instead of update routines.
Assign points if these help u...
Regards,
KK.

Process chain fails every time at "roll up of aggregates"

hi all,
A process is deffined in such a way that...                                        start
                                                                                i
                                                                                i
                                                        Delta loads to infocube1(load) deltaload to infocube2(load)       deltaload to infocube3(load)
                                                                        i                                                 i                                          i
                                                                        i                                                 i                                          i
                                                        delta load of aggregate(cube1)   delta load of aggregates(cube2)     delta load of aggregates
Every time when this process chain get executed,this fails at delta laod of aggregates step.If i repeat again it works fine.But repeating is not a solution for this.So,i want a permanent soltuion for this..
Please guide me what to do?and explain me why this happens.
Error message:-process rollup of filled aggregates/bia indexes,variant delta load of aggregates
Thanks( in advance)
Moushmi

Hi Moushmi,
Have you checked if the system has processes available while the chain is running? It could be that your system is overloaded and the aggregates wouldn't roll up because you have no processes or available memory.
Check with your Basis resource. Also, try changing your chain to do only 1 at a time. Do you have many aggregates to load, are they big, and most important are they being used.
Kathleen

Started same Process Chain automatically several times

Similar Messages

Maybe you are looking for