Starting my mac book pro 17''.

hi, i try to start my mac book pro 17''. when i press the start push button i can hear the intel starting tone and i can feel the hard disk is running ,but nothing is coming on screen, the screen is totally dark black, i have tried the method suggested in the opretional book.. plz help.thanks

You probably got the correct advice. A trip to the Apple store genius bar is the best option.
You could try SMC and PRAM resets, but I do not think that will be a solution. It will do no harm to try:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Similar Messages

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced. You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
Ciao.

How can i change when i start the mac book pro, between mac and win?

when i start the mac book pro, between mac and win?

If you want to set which OS your system boots into (provided Windows is installed using BootCamp and not a virtualization option such as Parallels, Fusion, or VirtualBox), just hold the "Option" key down when you turn your computer on. Continue to hold the key down until you see the options for booting into the OS of your choice. Just click on the arrow under the one you wish (tap to click won't work here if you have it enabled... you'll need to physically click the trackpad). If you want to change which OS your system normally boots into, just go into System Preferences in OS X and select "Starup Disk". Whichever OS you select here will be the OS your system will automatically boot into.

How to start my mac book pro safe mode?

my mac book pro is not start up but showing white screen . what should i do ?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Mac Book Pro start up, Mac Book Pro start up

My Mac Book pro is taking very long ot start up sometimes getting to home but then not loading anything else. it is a late 2011 model with Mavericks and about 4 years old now. i cant enter safe boot for some reason which is very annoying but cant reset PRAM. any thoughts on how to get it to work? it wont boot up after a crash the second time this week, which is the only time iv ever crashed. the other time it just shut down due to a kernel error. any thoughts on how to fix this problem? thank you very much for your time.

http://support.apple.com/kb/HT3964
The SMC is reset like the article above describes.
Barry

When starting up Mac Book Pro, a Flashing Globe appears

I am using a 2.4 GHZ Mac Book Pro, and whenever I boot up my laptop, it turns blue, and then a white screen appears for around a few minutes.. then a flashing globe pops up. My Mac still runs perfectly, but it takes around 5-8 minutes just to boot up my laptop.

Open the Startup Disk pane of System Preferences and set your hard disk as the startup disk.
(28622)

Starting my mac book pro, PROBLEM...

Hello there!
When i start my macbook pro with a short click on the start button it begins to work for 2 sec. then interrupts and it's out again. Only by long clicking on the start button i can start mac OS X or vista...
Is this a problem of the firmware because i remeber i had to make a long click during the update of my firmware half a year ago.... but this problem exists since yesterday...
can anybody help me?

Glad it worked.
Why did it happen? Lots of things can cause the SMC (which manages power in the system) to become corrupted...you might try to remember what you did between the last time it worked normally and when you noticed the problem.
Check the console logs, there may be a clue there.
At least now if it happens again you have an easy way to correct it.

Why do all the windows open when i start my mac book pro up

After closing all the windows on my macbook pro , i shut the computer down, on re-starting the computer it opens all the wuindows up again
any ideas why ?

Steve, are you closing the individual windows are quiting the programs? Do you have the box checked that says to open windows on restart? You should see that when you log out.

I start my mac book pro and sOSX utilities window instead of normal boot. I do not have Time machine back up and reinstalling not hapening. The installation window shows "Select the disk where you want to installl OS X thr is locked reovery?

I dont have time machine set up!!! how I can start in normal mode?
Thanks

Hi there jobe74,
You may want to try resetting the SMC and PRAM on your computer as an initial troubleshooting step. Take a look at the articles below for more information.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
-Griff W.

Hi, I accidentally erased my HD library, now I can't start my Mac book pro. Any suggestions? Thnx

The reason I did this was because there were two "library" folders in my HD and I was convinced one of them was a copy since they were identical.

I guess I should bring that disc with me in the future!
Actually you do not have to do that. Just burn a boot copy of your system discs that came with your computer or the universal install discs. Keep the bootable copy inside your travel computer bag and the originals home.
1.insert the leopard install DVD, open disk utility and select the whole DVD (model, not name) in disk utility.
2. go to File menu->new->disk image from the DVD. select CD/DVD master for format.
3. once the disk image is created, eject the install DVd and insert a blank DL DVD+R. drag the disk image to Disk utility, select it there and click "burn" in the toolbar.
Highly recommended discs: Verbatim DL DVD+R
SuperDrive: Mac OS X - How to burn data DVD-R disc
How to create a bootable CD in Mac OS X FAQ?

3 beeps at start up mac book pro

my daughter macbook slid off the sofa, after hitting the floor she opened the lid to check it and now it has 3 beeps at start up and wont actually start up.
i think its the RAM, could it have gotten knocked loose? If so, HOW do we locate it and put it back in place?

1. Yes.
2. Check your computer’s documentation, or click here and look up the instructions for the computer.
(113746)

Mac book pro was working normal but after shutdown I try to start but not start only black screen

My mac book pro was working normal , I shut down proper and I want to start again I press power button for start but not start , only black screen same on shut down position , so how can I start my mac book pro again

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Help My mac book pro does not start

i have a huge problem becauce i cannot start my mac book pro, i turn on and apear the gray screen with apple logo and round progresive bar, but just not have any change it cud be hours or days its the same, i already try to restore it by the comands (command+R) or (shift+caps lock) when i turn on my computher but alwais same logo screen, please i need help maby im doing someting wrong

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Need help with Mac Book Pro?

When I start the mac book pro, the disk drive keeps making noise. The computer can't get any further. Its like its looking for a disc startup. I put the start up disk in there and now it doesn't do anything. Its almost as if it won't boot the hard drive. Any advice would be appreciated.
Thanks, Matt

+the disk drive keeps making noise. The computer can't get any further.+
That's sounding like a hard disc failure sadly ...
+I put the start up disk in there and now it doesn't do anything.+
Restart holding down the 'c' key to force it to Boot from the DVD, if that works select Disc Utility from the top menu bar and then 'Repair Disc' and 'Repair Permissions' on the Internal Drive. Post your results here.

Starting my mac book pro 17''.

Similar Messages

Maybe you are looking for