Starting server from the Developer Studio

Hi all,
During starting the server in the SAP MC perspective in NWDS, the System prompts me to enter my Username and Password :
"Please, enter the credentials of the SAP System Administrator (<SID>adm)"
Which system administrations credential are meant here indeed?
The Username and password, which I normally use to deploy an application is not accepted here.
Should I enter my Username in a special combination?
Thanks,
Ali

Hi,
you should use your OS username and password to start/stop the server.
Hope that helps!

Similar Messages

Error in starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:29 PM
Edited by: Sahir Pathan on Jul 14, 2008 5:37 PM

Maybe when you are on netweaver studio, the instance number passed is the java one instead of the abap instance one :
sidadm> sapcontrol -nr 01 -function J2EEGetProcessList
27.02.2009 17:13:02
J2EEGetProcessList
OK
telnetPort, name, pid, type, restart, exitCode, state, startTime, elapsedTime, restartCount, errorCount, cpu, debug
0, SDM, 11557, SDM Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:14:36, Switched off
50108, dispatcher, 11555, J2EE Dispatcher, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:24:21, Disabled
0, server0, 11556, J2EE Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 1:16:31, Disabled
sidadm> sapcontrol -nr 11 -function J2EEGetProcessList
27.02.2009 17:13:17
J2EEGetProcessList
FAIL: JsfOpenAdmin failed: object not found
sidadm>

Cannot deploy from netweaver developer studio to application server

Hi
I am trying to deploy a simple EAR (ConverterEAR) to my application server.
From NW developer studio, right clicked on the SAP server that I have configured and try to a publish. It gives me the below exception. For some reason its trying to contact my old IP address. Is there a file where I can change this setting. My Laptop is set to use DHCP so my IP changes when I reboot my laptop. I also have configured a Microsoft loop back adapter.
ct 16, 2007 2:58:42 PM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Thread-17,5,main]] ERROR: com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:45)
     at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:80)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:181)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:358)
     at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:148)
     at com.sap.ide.j2ee.wtpserver.SAPPublisher$DeployRunnable.run(SAPPublisher.java:380)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.sap.engine.services.dc.api.ConnectionException: NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:189)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:115)
     at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:24)
     at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:66)
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:42)
     ... 6 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(Initia:lContextFactoryImpl.java:488)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:166)
     ... 10 more
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104
     at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
     at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
     ... 15 more
Environment
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP01
Build id: 200710090648
SAP_J2EE_Engine_Version -- 7.1.3301.150742.20070516182900
Thanks
Madhu

Hi,
you could change the connection settings to the server in the preference page in the Developer Studio. Check <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/0cf28fb4d01f23e10000000a1553f7/frameset.htm">this</a> page in the documentation for details.
In your case, you can also use the host name of your laptop, or even just localhost, in the Message Server Host field in the preferences page. This should overcome the problem with dynamic IPs.
Hope that helps!

Error when starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:30 PM

Hello Sahir,
Can you post some other error logs ?
Regards,
Siddhesh

Is it possible to start a remote server from the IDE?

I would want to know if it is possible to start a domain that makes reference to a remote server (from the IDE). On this way I could start and stop the server without loading so much the machine that I use to develop my portal applications. If it is possible how I can do it?

There is no personal Information on a crash Report unless you put something personally identifiable in the comment field. For example, here is a crash report I had on my machine awhile back: https://crash-stats.mozilla.com/report/index/bp-1de8924f-7068-4702-a410-89c492121220.
You can go to about:crashes in your address bar, and click on the report to view the info there to satisfy yourself that there is nothing in the report. But submitting crash reports is very useful because it gives us the ability to view what crashes are plaguing our users and what we need to fix.

Starting a WSAD server from the command prompt and not from the IDE UI

Hi,
is there a way to run the WSAD server from the command prompt instead of using the IDE UI . i have tried starting the server from the Directory i have installed WSAD " D:\Program Files\IBM\WebsphereStudio\runtimes\base_v5\bin>startServer.bat" but it gives the Following error " The system cannot find the path specified." i am working . do i have to specify the workspace that i am currently working on

to see if the network adapter has registered with OPMN run: opmnctl status
the 6200 message is a timeout which can be set in opmn.xml, the reports server(s) and other processes managed by OPMN should still stop.
Try opmnctl stopall or opmnctl shutdown
Does the timeout shows up regularly ie can you repeat it?
After the stopall or shutdown try to start everything up again and try to stop the single reports server process again.

Starting the 10G server from the command line

How do I start the 10G APP SERVER FROM THE COMMAND LINE?

http://download-west.oracle.com/docs/cd/B10464_01/core.904/b10376/start.htm#1007557
Documentation library for Application Server 10g. It has a section on starting/stopping

Deployment of SQL Server Business Intelligence Development Studio (2008 R2)

Looking for some guidance on deploying SQL Server Business Intelligence Development studio (2008 R2). I have a requirement from our Data Warehouse developers, and they require the SQL Server Business Intelligence Studio deployed to
the server that will hold the production data warehouse. Is the SQL Server Business Intelligence development studio normally deployed on a production server?
I am hesitant about installing the SQL Server Business Intelligence Development studio since it's a development tool. I haven't seen anything that it is required to run the developed objects.
Any information you can provide will be appreciated.
Thanks.
DJ

Hi DonsJones,
The SQL Server Business Intelligence Development studio (BIDS) is a client tool for BI Projects development and won’t be installed on the production server in most cases. For a DW/BI system, the BIDS is generally used to develop ETL packages, Data Mining,
and Reporting. The development activities should be performed in the Dev environment, and the eventually ETL packages or reports should be deployed to the production server or report server. For a production server that will run the ETL packages (usually in
SQL Server Agent jobs), SSIS should be installed on the production server.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

I have install the Developer Studio ,what's the next ?

I install the Developer Studio on my computer.
I need a remote server.
how build a remote server?
How can i set in the developer studio>windows>Preferences-->SAP J2EE Engine
and how to set in the SAP application server?(ECC6).
and how set the developer studio>windows>Perferences-->Web Dynpro.
if i finish a web dynpro project in the Developer Studio, how can i deploy it to the SAP Application server?
and how to test the application.
where can i get the all the manual ?

hi,
in studio>windows>Preferences-->SAP J2EE Engine
you give the WAS (web application server) path, you will gate them from below link..
http://service.sap.com/instguides
For All about NWDS
the easiest way to download NWDS is in Service Marketplace , there go to the software download center (service.sap.com/swdc) and click on "Search for all Categories" on the left hand side. If you search for "Developer Studio" and then click on "SAP NW DEVELOPER STUDIO 2.0" in the results, you can navigate down and find the SP that you are looking for. SP18 is available now.
or take a look here
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Download of SAP Netweaver Developer studio
for binding , deploying and running your application :http://help.sap.com/saphelp_nw04s/helpdata/en/26/6e5a3e740be946e10000000a114084/frameset.htm
Creating your first application:http://help.sap.com/saphelp_nw04s/helpdata/en/fd/ed32a8c9994b4ba4a1645a764814db/frameset.htm
Sample tutorials on web dynpro for javahttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d [original link is broken]
hope it helps
regards

Where can I download the developer studio?

Howdy,
I'd like to demo the developer studio to my ABAP team - anyone know where I could download this from?
Thanking you kindly.

Hi Steve,
seems that you are behind a squid proxy and it does not support proper ftp authentication.
Maybe you should try from home...
Additional info, maybe this holds only for a short time:
Under ftp://ftp.sap.com/pub/sdn/devkits/EP_DevEdition_SneakPreview/SP9 you will find EP6, KMC, WebAS & DevStudio SP9 the install instructions under ftp://ftp.sap.com/pub/sdn/devkits/EP_DevEdition_SneakPreview/install.htm All this is not officially anounced till now...
Have fun!
Best regards
Detlev

Problems starting server from within CFBuilder

I recently installed CFBuilder and setup a localhost server. I did not check the box to Use Windows Service to start/stop in the server setting. I currently have the CF Server set to manually startup in the Windows Services. When I finished the setup, I see the server starting up in the CFBuilder console. Everything seems to work fine until I restart my machine. Once I restart my machine and run CFBuilder, I cannot start the server from the Servers panel. A messages in the console comes back stating that the server is unresponsive. I thought it was my java version, so I updated the java to the latest 6_19. Still the problem exists. I uninstalled CFBuilder and reinstalled it, and it works fine (CF Server starts up in the console) until again I restart my machine.
I do have Windows Vista 32-bit. I downgraded back to Java version 6_06. I thought the problem was just my machine, but I have another Vista machine that is having the exact problem, and it has the same JAVA and Vista.
I looked through the Coldfusion Logs to see if I can find any errors. I have tried to find logs in CFBuilder, but I have not been able to locate any.
Any Ideas?
Thanks for your help!
Andrew

Hi Sam,
Unfortunately, this feature does not exist in Workshop 9.2
Regarding your question about redirecting the output, the logs are saved under the domain directory.
You could also refer to the following section for additional info on redirecting the output to multiple destinations.
http://e-docs.bea.com/wls/docs90/ConsoleHelp/taskhelp/logging/RedirectJVMOutput.html
Hope this helps.
cheers
Raj

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Cannot start server from console

It seems that this problem has been reported before but I have not found anybody posting a solution. I followed the instructions to install sp7 and am getting this error.
Can anyone help out since we are also stuck on this one. An additional note is that the SYSTEM CLASSPATH to be
appended from the registry does not show up in the console messages window. Any ideas?
hi,,
i tried to run weblogic console and i started weblogic server,,
i got the error message
Tue May 16 16:40:21 EDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
*************************************************************************** The WebLogic Server did
not start up properly. Exception raised: java.lang.reflect.InvocationTargetException java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not
found at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1390) at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:513) at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code) at
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at java.lang.reflect.Method.invoke(Native Method) at
weblogic.Server.startServerDynamically(Server.java:99) at weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55) java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1390) at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:513) at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code) at
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at java.lang.reflect.Method.invoke(Native Method) at
weblogic.Server.startServerDynamically(Server.java:99) at weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)
can anybody help me ..
thanks
bye
san

Yep...just in case
The weblogic classpath is as follows (obtained using wconfig)
d:\weblogic\lib\weblogic510sp7.jar;d:\weblogic\license;d:\weblogic\classes;d:\weblogic\myserver\serverclasses;d:\weblogic\lib\weblogicaux.jar
The system classpath is as follows
d:\weblogic\lib\weblogic510sp7boot.jar;d:\weblogic\myserver\serverclasses;d:\weblogic\jre1_2\lib\tools.jar;d:\weblogic\jre1_2\jre\lib\rt.jar;d:\weblogic\jre1_2\jre\lib\i18n.jar;d:\weblogic\license;d:\weblogic\classes\boot;d:\weblogic\classes;d:\weblogic\lib\weblogicaux.jar;d:\weblogic\eval\cloudscape\lib\cloudscape.jar
NOTE that we are able to start the server from the command prompt fine using startWebLogic.cmd
/Deepak
"Jim Clark" <[email protected]> wrote:
I guess you are running NT. Did you log out and log back in after setting
your CLASSPATH?
Can you echo your CLASSPATH? What is your WEBLOGIC CLASSPATH?
Jim
"Deepak Srinivasan" <[email protected]> wrote in message
news:[email protected]...
It seems that this problem has been reported before but I have not foundanybody posting a solution. I followed the instructions to install sp7 and
am getting this error.
Can anyone help out since we are also stuck on this one. An additionalnote is that the SYSTEM CLASSPATH to be
appended from the registry does not show up in the console messageswindow. Any ideas?
hi,,
i tried to run weblogic console and istarted weblogic server,,
i got the error message
Tue May 16 16:40:21 EDT 2000:<I> <EJB>0 deployed, 0 failed to deploy.
>
The WebLogic Server did
not start up properly. Exceptionraised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError:weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not
found atweblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
atweblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1390) at
>
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
513) at
>
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled
Code) at
>
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at
weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
>
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at
java.lang.reflect.Method.invoke(Native Method) at
>
weblogic.Server.startServerDynamically(Server.java:99) at
weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
>
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
atweblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1390) at
>
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
513) at
>
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled
Code) at
>
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at
weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
>
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at
java.lang.reflect.Method.invoke(Native Method) at
>
weblogic.Server.startServerDynamically(Server.java:99) at
weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)
can anybody help me ..
thanks
bye
san

Is it possible to create a development object from the development tab?

Hello All,
One the central concepts of SAP Solution Manager is that you perform almost all activities starting in Solution Manager. As I understand, it is not possible to create a customer development such as a program from the development tab in SSM. You first have to logon to the 'satelite' development system and create the object. Then you can register this object at the development tab.
Is this correct?
Thanks in advance.

Hi,
You are right, you have to create your objects in your satellite system (its obvious).
This object can be against any servicedesk message or any requirement for a particular business process, thus keeping track of all the developments process wise, request wise.
Hope this solves your problem.
Feel free to revert back.
--Ragu

Is it possible to use some product on the unix server at the development level which would make it p

Hello,
We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
Best Regards,
Deepak

Dear Aandi,
I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
Best Regards,
Deepak Goyal

Starting server from the Developer Studio

Similar Messages

Maybe you are looking for