Problems starting server from within CFBuilder

I recently installed CFBuilder and setup a localhost server. I did not check the box to Use Windows Service to start/stop in the server setting. I currently have the CF Server set to manually startup in the Windows Services. When I finished the setup, I see the server starting up in the CFBuilder console. Everything seems to work fine until I restart my machine. Once I restart my machine and run CFBuilder, I cannot start the server from the Servers panel. A messages in the console comes back stating that the server is unresponsive. I thought it was my java version, so I updated the java to the latest 6_19. Still the problem exists. I uninstalled CFBuilder and reinstalled it, and it works fine (CF Server starts up in the console) until again I restart my machine.
I do have Windows Vista 32-bit. I downgraded back to Java version 6_06. I thought the problem was just my machine, but I have another Vista machine that is having the exact problem, and it has the same JAVA and Vista.
I looked through the Coldfusion Logs to see if I can find any errors. I have tried to find logs in CFBuilder, but I have not been able to locate any.
Any Ideas?
Thanks for your help!
Andrew

Hi Sam,
Unfortunately, this feature does not exist in Workshop 9.2
Regarding your question about redirecting the output, the logs are saved under the domain directory.
You could also refer to the following section for additional info on redirecting the output to multiple destinations.
http://e-docs.bea.com/wls/docs90/ConsoleHelp/taskhelp/logging/RedirectJVMOutput.html
Hope this helps.
cheers
Raj

Similar Messages

How to redirect console output while starting server from within IDE

Hello, i am using Weblogic Workshop IDE. When I start the server, a new cmd shell is launched and the jvm output is displayed in this cmd shell window. How can I redirect this output to show up within the IDE (for instance in the Console view)?
Problem is that when an error occurs, the cmd window disappears and I cannot tell what the error was.
Surely there is a way to do this as other IDEs (JBuilder, Rational etc.) allow this.
Thanks:
-Sam

Hi Sam,
Unfortunately, this feature does not exist in Workshop 9.2
Regarding your question about redirecting the output, the logs are saved under the domain directory.
You could also refer to the following section for additional info on redirecting the output to multiple destinations.
http://e-docs.bea.com/wls/docs90/ConsoleHelp/taskhelp/logging/RedirectJVMOutput.html
Hope this helps.
cheers
Raj

Is it possible to link to specific files on a server from within a pdf?

Hi all,
Is it possible to create hyperlinks to a specific file on a Windows server from within a pdf?
Let me explain further, I am working on a Mac trying to create hyperlinks from within InDesign to specific files on a Windows server. I am exporting the file to pdf, along with the hyperlinks, which look correct when I click on them from within Acrobat.
On Windows, the links will read as \\servername\directoryname\filename so this is exactly how I enter it as the hyperlink. When I view the hyperlink information in the resulting pdf from within Acrobat, it still looks correct as \\servername\directoryname\filename but when I try to click on it from the Windows side OR the Mac side, the link doesn't work and gets changed....the slashes revert to the opposite direction and the whole link gets messed up. I am trying to figure out if the cause is InDesign, Acrobat or whether this can even be done? Of corse, I never have issues with normal URLS.
What we are trying to do is set up an internal catalogue for the company of all our materials. (Everyone works on Windows)
Should I try to create the links from within a Windows version of Acrobat... do you think that will make any difference?
Thanks in advance for your help:)
Very much appreciated!
Christine

Thank you for your help...very much appreciated!
Basically, what we needed were for the links to be static and not relative, and they were mainly for Windows users. What finally worked was creating the links from within a Windows version of Acrobat. We plan to email the final pdf to several employees around the word (we are an international company) with all the links intact. Once they were logged into our network (vpn'd in) the links would still be valid no matter where the document was located. The trick is to change the start of the link to a specific IP address (the server address) when you are setting it up in Acrobat. I hope this makes sense and is helpful for everyone else out there:)
(P.S. This works for Windows users only though and cannot be done via the Mac version of Acrobat. I can set things up within the Mac version of Acrobat so that the links will work as long as the document resides in the same location on the server... the advantage to doing it THIS way is that it will work for BOTH Mac and Windows users.)
Thanks again,
Christine

Having problem starting server

I am running into this problem starting server in weblogic 9.1, The server changes to RUNNING mode but throws this error after this .
Here is stdout:
C:\projects\config\ddev91>echo $Header: /u01/projects/cvs/omega/build/conf/weblogic/startwl.cmd,v 1.11 2005/11/16 15:55:51 rphillips Exp $
$Header: /u01/projects/cvs/omega/build/conf/weblogic/startwl.cmd,v 1.11 2005/11/16 15:55:51 rphillips Exp $
A subdirectory or file filestore already exists.
Remote Debugging is Off
Using Default memory model
C:\projects\config\ddev91>if not exist c:\projects\config\ddev91\servers\ddev-desktop\data\ldap\ldapfiles\nul.ext (
echo LDAP files no found, calling authwl_desktop.cmd
call authwl_desktop.cmd
C:\projects\config\ddev91>"/bea91/jdk150_04\bin\java" -Xms256m -Xmx512m -XX:MaxPermSize=128m -Dweblogic.alternateTypesDirectory=c:/projects/config/ddev91/lib/mbeantypes -DProductionModeEnabled=true -Dorg.xml.sax.driver="weblogic.apache.xerces.parser
s.SAXParser" -DEJBNoClassLoader -Dcom.frontier.epn.EPNI_Handler_lookup="com.emergis.els.server.persistence.loan.handler.EPNIHandler" -Dlog4j.configuration=file:/projects/config/ddev91/props/log4j.properties -Dcom.frontier.epn.log4j=/projects/config/d
dev91/props/log4j.properties -Dconfig.path=/projects/config/ddev91/props -Dweblogic.Domain=ddev91 -Dcallback.listener.config=/projects/config/ddev91/props/EPNI.properties -Dweblogic.Name=ddev-desktop "-Dbea.home=/bea91" "-Djava.security.policy==/bea9
1/weblogic91/lib/weblogic.policy" "-Dweblogic.management.username=system" "-Dweblogic.management.password=weblogic" "-Dcom.frontier.epn.USE_PSTMT=true" -Dweblogic.RootDirectory=c:\/projects\/config\/ddev91 weblogic.Server
<Jan 25, 2006 9:56:36 AM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\projects\config\ddev91\lib\client.jar;C:\projects\config\ddev91\lib\cmn-log.jar;C:\projects\config\ddev91\lib\commons-beanutils-1.6.1.jar;C:\projects\config\ddev91\lib\commons-collections-2.1.jar;C:\projects\config\ddev91\lib\commons-httpclient-2.
0.jar;C:\projects\config\ddev91\lib\cos.jar;C:\projects\config\ddev91\lib\CR096950_61sp4.jar;C:\projects\config\ddev91\lib\CR177114_81sp3.jar;C:\projects\config\ddev91\lib\DbLog-bin-jdk14.jar;C:\projects\config\ddev91\lib\DbLog-bin-jdk15-generics.jar
;C:\projects\config\ddev91\lib\DbLog-bin-jdk15.jar;C:\projects\config\ddev91\lib\elsStartup.jar;C:\projects\config\ddev91\lib\FrontierEPN-jdk14.jar;C:\projects\config\ddev91\lib\FrontierEPN.jar;C:\projects\config\ddev91\lib\gnu-regexp-1.1.4.jar;C:\pr
ojects\config\ddev91\lib\iText.jar;C:\projects\config\ddev91\lib\jakarta-regexp-1.3.jar;C:\projects\config\ddev91\lib\jaxb-rt-1.0-ea.jar;C:\projects\config\ddev91\lib\jaxb-xjc-1.0-ea.jar;C:\projects\config\ddev91\lib\jcert.jar;C:\projects\config\ddev
91\lib\jpedal-jdk13.jar;C:\projects\config\ddev91\lib\jpedal-jdk14.jar;C:\projects\config\ddev91\lib\jsse.jar;C:\projects\config\ddev91\lib\jstl.jar;C:\projects\config\ddev91\lib\log4j.jar;C:\projects\config\ddev91\lib\mbeantypes\eLendingProviders.ja
r;C:\projects\config\ddev91\lib\ojdbc14-10.2.0.1.0.jar;C:\projects\config\ddev91\lib\ojdbc14-9.2.0.5.jar;C:\projects\config\ddev91\lib\omegaUtils.jar;C:\projects\config\ddev91\lib\resolver.jar;C:\projects\config\ddev91\lib\standard.jar;C:\projects\co
nfig\ddev91\lib\struts-1.2.4.jar;C:\projects\config\ddev91\lib\testsupport\classes12.jar;C:\projects\config\ddev91\lib\testsupport\commons-beanutils-1.6.1.jar;C:\projects\config\ddev91\lib\testsupport\commons-collections-2.1.jar;C:\projects\config\dd
ev91\lib\testsupport\commons-digester-1.5.jar;C:\projects\config\ddev91\lib\testsupport\commons-httpclient-2.0.jar;C:\projects\config\ddev91\lib\testsupport\commons-logging-1.0.3.jar;C:\projects\config\ddev91\lib\testsupport\freemarker-2.3rc3.jar;C:\
projects\config\ddev91\lib\testsupport\handlerTraceTool.jar;C:\projects\config\ddev91\lib\testsupport\httpunit-1.6.1.jar;C:\projects\config\ddev91\lib\testsupport\js.jar;C:\projects\config\ddev91\lib\testsupport\junit.jar;C:\projects\config\ddev91\li
b\testsupport\junit3.8.1.jar;C:\projects\config\ddev91\lib\testsupport\junitperf.jar;C:\projects\config\ddev91\lib\testsupport\nekohtml-0.9.1.jar;C:\projects\config\ddev91\lib\testsupport\optionalEls.jar;C:\projects\config\ddev91\lib\testsupport\quar
tz-1.4.0.jar;C:\projects\config\ddev91\lib\testsupport\soapclient\axis.jar;C:\projects\config\ddev91\lib\testsupport\soapclient\commons-discovery.jar;C:\projects\config\ddev91\lib\testsupport\soapclient\commons-logging.jar;C:\projects\config\ddev91\l
ib\testsupport\soapclient\jaxrpc.jar;C:\projects\config\ddev91\lib\testsupport\soapclient\saaj.jar;C:\projects\config\ddev91\lib\testsupport\soapclient\wsdl4j.jar;C:\projects\config\ddev91\lib\testsupport\xercesImpl.jar;C:\projects\config\ddev91\lib\
testsupport\xmlParserAPIs.jar;C:\projects\config\ddev91\lib\testsupport\xmlunit1.0.jar;C:\projects\config\ddev91\lib\testsUtils.jar;C:\projects\config\ddev91\lib\tiles.jar;C:\projects\config\ddev91\lib\tncore.jar>
<Jan 25, 2006 9:56:36 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.5.0_04-b05 from Sun Microsystems Inc.>
<Jan 25, 2006 9:56:37 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<Jan 25, 2006 9:56:40 AM EST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : \bea91\license.bea>
<Jan 25, 2006 9:56:40 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 25, 2006 9:56:40 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 25, 2006 9:56:41 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\projects\config\ddev91\servers\ddev-desktop\logs\ddev-desktop.log is opened. All server side log events will be written to this file.>
<Jan 25, 2006 9:56:41 AM EST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'C:\bea91\jdk150_04\bin;.;C:\WINDOWS\system32;C:\WINDOWS;/bea91/weblogic91\bin;c:\OptimizeitSui
te\OptimizeitSuite42;C:\jikes-1.22\bin;C:\bea91\jdk150_04\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\cvsnt;C:\apache-ant-1.6.5\bin;%JAVA_HOME\bin;C:\jikes-1.18\bin
;"C:\Program Files\GNU\WinCvs 2.0";C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;;/oracle/ora90\bin'
>
<Jan 25, 2006 9:56:42 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 25, 2006 9:56:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 25, 2006 9:56:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 25, 2006 9:56:48 AM EST> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<Jan 25, 2006 9:56:48 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jan 25, 2006 9:56:48 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jan 25, 2006 9:56:49 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, http.>
<Jan 25, 2006 9:56:49 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.44.0.171:7001 for protocols iiop, t3, ldap, http.>
<Jan 25, 2006 9:56:49 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "ddev-desktop" for domain "ddev91" running in Development Mode>
<Jan 25, 2006 9:56:49 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jan 25, 2006 9:56:49 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Jan 25, 2006 9:56:50 AM EST> <Error> <HTTP> <BEA-101359> <The servlet weblogic.servlet.AsyncInitServlet init method failed while it was run in the background. The exception was: java.lang.NoClassDefFoundError: org/apache/commons/digester/RuleSet.
java.lang.NoClassDefFoundError: org/apache/commons/digester/RuleSet
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at weblogic.servlet.AsyncInitServlet.createDelegate(AsyncInitServlet.java:43)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:92)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
Truncated. see log file for complete stacktrace
>

The only thing abnormal is
java.lang.NoClassDefFoundError: org/apache/commons/digester/RuleSet
Do you have the digester's jar in the WEB-INF/lib of you application?

How do I start flexilayouts from within dreamweaver?

how do I start flexilayouts from within dreamweaver?

Did you install the extension and enable it in your Extension Manager yet?
Command > Manage Extensions.
FlexiLayouts extension
http://www.extendstudio.com/product/tableless-css-layouts-for-dreamweaver.html
Nancy O.

I have a problem when buying from within the game

I have a problem when buying from within the game
i used visa..

All games? Settings > General > Restrictions has an option to prevent In-App Purchases. Is that on?

Error in starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:29 PM
Edited by: Sahir Pathan on Jul 14, 2008 5:37 PM

Maybe when you are on netweaver studio, the instance number passed is the java one instead of the abap instance one :
sidadm> sapcontrol -nr 01 -function J2EEGetProcessList
27.02.2009 17:13:02
J2EEGetProcessList
OK
telnetPort, name, pid, type, restart, exitCode, state, startTime, elapsedTime, restartCount, errorCount, cpu, debug
0, SDM, 11557, SDM Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:14:36, Switched off
50108, dispatcher, 11555, J2EE Dispatcher, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:24:21, Disabled
0, server0, 11556, J2EE Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 1:16:31, Disabled
sidadm> sapcontrol -nr 11 -function J2EEGetProcessList
27.02.2009 17:13:17
J2EEGetProcessList
FAIL: JsfOpenAdmin failed: object not found
sidadm>

Problem starting server with nodemanager

Hello,
I have a cluster running on JRockit on Windows 2003 sever and everything works fine when I start nodes from command line, but when I try to start cluster nodes from admin console through node managers in the log file I get:
=================
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Starting WebLogic server with command line: C:\bea\JROCKI~1\jre\bin\java -Dweblogic.Name=Alfa1 -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy -Dweblogic.management.server=http://141.146.8.111:7001 -Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;c:\program files\imagemagick-6.2.8-q16;C:\Program Files\Support Tools\;C:\Program Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\ -Djava.class.path=.;C:\bea\patch_weblogic910\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\webservices.jar -Dweblogic.system.BootIdentityFile=C:\bea\user_projects\domains\alfa_domain2\servers\Alfa1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false weblogic.Server >
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Working directory is "C:\bea\user_projects\domains\alfa_domain2">
<Jul 21, 2006 10:50:57 AM> <Info> <NodeManager> <Server output log file is "C:\bea\user_projects\domains\alfa_domain2\servers\Alfa1\logs\Alfa1.out">
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-jrockit     to select the "jrockit" VM
-client     to select the "client" VM
-server     to select the "server" VM [synonym for the "jrockit" VM]
The default VM is jrockit.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent library <libname>, e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming language agent, see java.lang.instrument
<Jul 21, 2006 10:50:59 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
==============
It seems that node manager appends system PATH to the java.library.path of the server it is trying to start. The problem is spaces in the system PATH:
-Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;c:\program files\imagemagick-6.2.8-q16;C:\Program Files\Support Tools\;C:\Program Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\
java expects another option after space.
How do I make nodemanager not to append system path to server's java.library.path?
Is there a way to make node manager start server nodes with java.library.path value in quotation marks?
P.S. I'm running node manager as windows service. I saw a post that solves this problem by starting node manager from command line but this solution is not sufficient.

Gediminas Aleknavicius skrev:
How do I make nodemanager not to append system path to server's java.library.path?Hi!
This news group is about JRockit. People here tend not to know that
much about non-JRockit products (like nodemanager). Try some WLx forum,
they should be able to answer your question!
Regards //Johan

Error when starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:30 PM

Hello Sahir,
Can you post some other error logs ?
Regards,
Siddhesh

Cannot start server from console

It seems that this problem has been reported before but I have not found anybody posting a solution. I followed the instructions to install sp7 and am getting this error.
Can anyone help out since we are also stuck on this one. An additional note is that the SYSTEM CLASSPATH to be
appended from the registry does not show up in the console messages window. Any ideas?
hi,,
i tried to run weblogic console and i started weblogic server,,
i got the error message
Tue May 16 16:40:21 EDT 2000:<I> <EJB> 0 deployed, 0 failed to deploy.
*************************************************************************** The WebLogic Server did
not start up properly. Exception raised: java.lang.reflect.InvocationTargetException java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not
found at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1390) at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:513) at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code) at
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at java.lang.reflect.Method.invoke(Native Method) at
weblogic.Server.startServerDynamically(Server.java:99) at weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55) java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112) at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53) at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1390) at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:513) at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code) at
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at java.lang.reflect.Method.invoke(Native Method) at
weblogic.Server.startServerDynamically(Server.java:99) at weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)
can anybody help me ..
thanks
bye
san

Yep...just in case
The weblogic classpath is as follows (obtained using wconfig)
d:\weblogic\lib\weblogic510sp7.jar;d:\weblogic\license;d:\weblogic\classes;d:\weblogic\myserver\serverclasses;d:\weblogic\lib\weblogicaux.jar
The system classpath is as follows
d:\weblogic\lib\weblogic510sp7boot.jar;d:\weblogic\myserver\serverclasses;d:\weblogic\jre1_2\lib\tools.jar;d:\weblogic\jre1_2\jre\lib\rt.jar;d:\weblogic\jre1_2\jre\lib\i18n.jar;d:\weblogic\license;d:\weblogic\classes\boot;d:\weblogic\classes;d:\weblogic\lib\weblogicaux.jar;d:\weblogic\eval\cloudscape\lib\cloudscape.jar
NOTE that we are able to start the server from the command prompt fine using startWebLogic.cmd
/Deepak
"Jim Clark" <[email protected]> wrote:
I guess you are running NT. Did you log out and log back in after setting
your CLASSPATH?
Can you echo your CLASSPATH? What is your WEBLOGIC CLASSPATH?
Jim
"Deepak Srinivasan" <[email protected]> wrote in message
news:[email protected]...
It seems that this problem has been reported before but I have not foundanybody posting a solution. I followed the instructions to install sp7 and
am getting this error.
Can anyone help out since we are also stuck on this one. An additionalnote is that the SYSTEM CLASSPATH to be
appended from the registry does not show up in the console messageswindow. Any ideas?
hi,,
i tried to run weblogic console and istarted weblogic server,,
i got the error message
Tue May 16 16:40:21 EDT 2000:<I> <EJB>0 deployed, 0 failed to deploy.
>
The WebLogic Server did
not start up properly. Exceptionraised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoSuchMethodError:weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not
found atweblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
atweblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1390) at
>
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
513) at
>
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled
Code) at
>
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at
weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
>
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at
java.lang.reflect.Method.invoke(Native Method) at
>
weblogic.Server.startServerDynamically(Server.java:99) at
weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
>
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112) at
>
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53) at
>
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
atweblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1390) at
>
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
513) at
>
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled
Code) at
>
weblogic.t3.srvr.HttpServer.start(HttpServer.java:442) at
weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code) at
>
weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825) at
java.lang.reflect.Method.invoke(Native Method) at
>
weblogic.Server.startServerDynamically(Server.java:99) at
weblogic.Server.main(Server.java:65) at
weblogic.Server.main(Server.java:55)
can anybody help me ..
thanks
bye
san

Dhcpcd hook problem: start python script within hook

Dear fellow Arch fans,
I'm encountering a rather annoying problem:
When I lose my internet connection my pidgin client doesn't get 'informed' about this and I won't receive IMs for an unspecified amount of time. I thought that I could work around this by myself, therefore I wrote two scripts in Python which connect/disconnect all active Pidgin-accounts using DBus. Both of them work fine. I also wrote a dhcpcd hook which should "listen" for a "NOCARRIER" and a "BOUND" reason which for itself also works fine (puts some output in a logfile).
The problem now is to invoke the python scripts from within the hook. My hook looks as follows:
lf='/var/log/myhook.log'
case $reason in
NOCARRIER)
echo "nocarrier branch" >> $lf
sudo -u os python2 /usr/lib/dhcpcd/dhcpcd-hooks/\
scripts/pidgin_dbus_discon.py >> $lf
BOUND)
sudo -u os python2 /usr/lib/dhcpcd/dhcpcd-hooks/
scripts/pidgin_dbus_con.py >> $lf
echo "bound branch" >> $lf
echo $reason >> $lf
esac
A sample output from the logfile /var/log/myhook.log after two cable pulls looks like
nocarrier branch
CARRIER
bound branch
nocarrier
CARRIER
bound
But even on unsuccessful invocation the pidgin_dbus_con.py-script should at least print
con-script started
con-script finished
Does anyone have a clue what the problem might be here?
I would appreciate any help!
os
Last edited by os (2010-12-29 13:47:15)

If I enable dhcpcd like this: "systemctl enable dhcpcd", i.e. w/o using an interface name, it kind of works:
May 16 19:42:57 epbyminw1076 dhcpcd[315]: eno1: waiting for carrier
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: carrier acquired
May 16 19:43:01 epbyminw1076 dhcpcd[315]: DUID 00:01:00:01:19:92:10:5e:6c:3b:e5:33:0a:0a
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: IAID e5:33:0a:0a
May 16 19:43:01 epbyminw1076 dhcpcd[315]: eno1: soliciting a DHCP lease
May 16 19:48:18 epbyminw1076 dhcpcd[315]: eno1: offered 10.6.44.58 from 10.6.0.3
May 16 19:48:18 epbyminw1076 dhcpcd[315]: eno1: ignoring offer of 10.6.44.58 from 10.6.0.6
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: leased 10.6.44.58 for 259200 seconds
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: adding route to 10.6.0.0/18
May 16 19:48:22 epbyminw1076 dhcpcd[315]: eno1: adding default route via 10.6.0.1
But it takes several minutes to obtain an IP-address.
Last edited by yarmash (2014-05-16 17:12:51)

Problems starting tcode from swo1-object via gos (so_sendobj)

Hi,
working with gos around some swo1-object, i got the problem to start a transaction which is called from an object method: the transaction starts but the wished details of that item do not appear as expected.
When I start the test environment within tcode SWO1, and at first, I create an instance from this object giving it the right key (for the wished item) then i succeed in starting the bespoken transaction from within that method showing me the details for that item.
In the last days, I have read and learned a lot about the possibilities and interdependences of the gos mechanism using many of the hints and advices which were given here in the forum in the past. But I'am not able to achieve the wished effect via gos (send object with note) from within our application.
My guess, we need to start an instance of the object before we can show details for the wished item. In the normal case, the application shows at the left windows with containers/trees for search filters and items and within the main window on the right the details for that item. Starting this transaction a popup-window appears (showing the standard filter) where you can give the wished item no.
As I remarked, starting all these things from within the swo1 environment everything is functioning as expected...
Is there anybody who has made a similar experience and can give me some advice what we have to do to succeed in?? Is there any function module of kind SWU..., SWE... SWO... or something else which is to be called in front of that task???
I forgot to mention that within our application, there is the correct? built up of the gos-object via class cl_gos_manager constructing the needed object and the needed key, so when calling the gos-action, the bypassed sap user finds the link in the inbound position and will be directed to the correct transaction with the side effects described before.
Wish you all together a happy new year.
Kind regards
Christian

My freind ,
in the   Bussiness Objects migatration there is no select-options like
sending range of data or the multiple selections.
for this we need separate   loop structure   where in we can send the multiple   data and everytime it calls the BAPI Obect evertime individaully ,
if you want the you have to define one new   BOR object (Custom bapi)...then rignt one function module for   select-options and attach it to you method in the BAPI   .
So that   your BAPI calls in the SAP function Module   for range of data .
Reward points if it is usefull ....
Girish

Problem sending mail from within C#

Sorry, I am posting this question for the second time !!!!
I have constructed a snippet that sends mail from within C#.In My script, there are will be several receivers of my mail. The script will read from a file, mail addresses and send mail to each individual contained in the file. As test I run the script with
two mail addresses in the file,one my own and the second with outlook mail. However, the result is I get the mail but the second receiver never gets it.
What is the problem ????
Please help
I debugged the program and verified that Nsmtp and Mailreceiver are correct
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Net;
using System.Net.Mail;
using System.Net.Mime;
using System.Text;
using System.Windows.Forms;
namespace Note_Pss
public partial class Email : Form
public Note_Pss.Form1 m_parent;
Util util = new Util(); string signal = "#";
char g = System.Convert.ToChar("*");
char X = System.Convert.ToChar("@");
Utility_Types utility_type = new Utility_Types(); string P = "";
char p; String Mailsender; String Npass; String Nsmtp;
String Mailreceiver; String Mailbody; String MailTitle;
MailMessage mail = new MailMessage();
public Email(Note_Pss.Form1 parent)
InitializeComponent();
m_parent = parent;
string ListContent = util.openf(wsk.storagedbase + @"\TemFile");
wsk.listArray = util.arrayadjust(ListContent, signal);
private void multi_mail_Send()
{char g = System.Convert.ToChar("*");
MailParameters();
int Count_num = wsk.listArray.Count;
for (int i = 0; i < Count_num; i++)
string P = wsk.listArray[i].ToString();
string[] Sub_File = P.Split(g);
Mailreceiver = Sub_File[2].ToString();
Nsmtp = "smtp."+msmtp_name(Mailreceiver, "@");
Send_Mail();
//if (Enclosure.Text != "") MailAttachment();
//MailBody();
private String msmtp_name(string p, string p_2)
string P = p.ToString();
string[] Pp = P.Split(X);
string bbb = Pp[1];
return bbb;
private void MailParameters()
Mailsender = Sender.Text;
Npass = Senderpass.Text;
Mailbody = Body.Text;
MailTitle = Subject.Text;
private void Send_Mail()
try
MailMessage mail = new MailMessage();
SmtpClient client = new SmtpClient();
client.Port = 587;
client.Host = Nsmtp;
mail.From = new MailAddress(Mailsender);
mail.To.Add(Mailreceiver);
mail.Subject = MailTitle;
mail.Body = Mailbody;
textBox1.Text = Nsmtp + " " + Mailreceiver;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.UseDefaultCredentials = false;
client.Credentials = new System.Net.NetworkCredential(Mailsender, Npass);
client.EnableSsl = true;
client.Send(mail);
catch (Exception ex) { textBox1.Text = ex.ToString(); }
private void MailSend_Click(object sender, EventArgs e)
{ multi_mail_Send(); }
private void button2_Click(object sender, EventArgs e)
{ Enclosure.Text = util.openImage();}
private void button1_Click(object sender, EventArgs e)
this.Close();

Nsmtp and Mailreceiver are verified through debugging:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Net.Mail;
using System.Net.Mime;
using System.Net;
namespace Note_Pss
public partial class Email : Form
public Note_Pss.Form1 m_parent;
Util util = new Util(); string signal = "#";
char g = System.Convert.ToChar("*");
char X = System.Convert.ToChar("@");
Utility_Types utility_type = new Utility_Types(); string P = "";
char p; String Mailsender; String Npass; String Nsmtp;
String Mailreceiver; String Mailbody; String MailTitle;
MailMessage mail = new MailMessage();
public Email(Note_Pss.Form1 parent)
InitializeComponent();
m_parent = parent;
string ListContent = util.openf(wsk.storagedbase + @"\TemFile");
wsk.listArray = util.arrayadjust(ListContent, signal);
private void multi_mail_Send()
char g = System.Convert.ToChar("*");
MailParameters();
int Count_num = wsk.listArray.Count;
for (int i = 0; i < Count_num; i++)
string P = wsk.listArray[i].ToString();
string[] Sub_File = P.Split(g);
Mailreceiver = Sub_File[2].ToString();
Nsmtp = "smtp." + msmtp_name(Mailreceiver, "@");
Send_Mail();
//if (Enclosure.Text != "") MailAttachment();
//MailBody();
private String msmtp_name(string p, string p_2)
string P = p.ToString();
string[] Pp = P.Split(X);
string bbb = Pp[1];
return bbb;
private void MailParameters()
Mailsender = Sender.Text;
Npass = Senderpass.Text;
Mailbody = Body.Text;
MailTitle = Subject.Text;
private void Send_Mail()
try
MailMessage mail = new MailMessage();
SmtpClient client = new SmtpClient();
client.Port = 587;
client.Host = Nsmtp;
mail.From = new MailAddress(Mailsender);
mail.To.Add(Mailreceiver);
mail.Subject = MailTitle;
mail.Body = Mailbody;
//SmtpServer.Port = 25;
//textBox1.Text = Nsmtp + " " + Mailreceiver;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.UseDefaultCredentials = false;
client.Credentials = new System.Net.NetworkCredential(Mailsender, Npass);
client.EnableSsl = true;
client.Send(mail);
// MessageBox.Show("mail Send");
catch (Exception ex) { }
private void MailSend_Click(object sender, EventArgs e)
{ multi_mail_Send(); }
private void button2_Click(object sender, EventArgs e)
{ Enclosure.Text = util.openImage(); }
private void button1_Click(object sender, EventArgs e)
this.Close();

Problems starting up from panther discs

Hello! My Mother recently purchased a printer that only works with Mac OS X, but her iMac was only OS 9.2. I thought it'd be easy to upgrade, and purchased a retail version of OS X Panther discs from macresue.com. Well, everytime I try to start up from the first disc it flashes a white screen and then the "?"/mac face. It does that a few seconds and then does a normal start up. It's a iMac G3, Power PC, 400 mhz, 128 RAM (bought from an apple store a year after we purchased the computer.) It has a DVD Rom drive, but not a CD burner or anything like that. I'm pretty sure it should be able to start up the disc. I have the required firmwire update (4.1.9), and the only thing I can think of think of that might cause a problem is the keyboard. It's not an Apple product (kensingston) but the Apple keyboard we have is broken (water spilled on it!) I'm not about to go running to buy a new keyboard, because I'm not sure if that'll even help. I hope someone here can help me figure out what this computer's problem is with the OS X Panther discs?
Thanks,
Belle
iMac G3 Mac OS 9.2.x

Hi Belle, and welcome to the discussions.
First off, 128 MB is the minimum required for Panther; it will run, but it'll be slow. I just finished installing on a 350MHz iMac with 128MB of RAM (I'll be adding more RAM before putting the iMac to use). What you're doing will work - we just have to figure out what's wrong.
1. You say you have the required firmware update. Does that mean it's been installed?
2. From everything I've heard, macrescue.com is pretty reliable, but I just want to verify that you did indeed receive the retail disks. There should be four in the set, three black install disks, each with a large silver X in the middle, and one white XCode Tools disk with a picture of a hammer and blueprint in the middle.
3. Is your RAM a single 128MB module, or two 64MB modules? If you still have the Apple Hardware Test CD that came with the computer, boot from the CD and run a thorough test.
4. Even if your RAM passes the Hardware test, it's possible that something is wrong with it. Panther requires stricter adherence to RAM specifications than earlier operating systems, so the iMac might run perfectly under OS 9, but won't run at all under OSX. If the RAM was purchased from Apple, it should have a lifetime warranty. Take it back to the store and have them test the RAM, or better yet, see if they'll give you a discount on 256MB in exchange.
5. Assuming the firmware has been installed, and the disks are the retail version, check the first install disk for any scratches, fingerprints, or imperfections. Polish the CD with a soft cloth to get it as clean as possible, then try again.
Good luck, and post back with any questions/results.
Andrew

Problem calling servlet from within a jsp

I have a servlet which obtains images for a page
http://bychance.ca/servlet/ImageServlet?PhotoId=AJ-LA-4008
I use the servlet from within a jsp
<img src="servlet/ImageServlet?PhotoId=<%=rs.getObject("ID")%>" border="0">
for some reason it does not work, the images are never called. I have another servlet which is called the same way and it works fine
<img src="servlet/ImageServletLarge?PhotoId=<%=strPhotoId%>" border="0">
Thank you all for your time

this is my servlet code. Like I said it works fine in another servlet
rs.next();
byte[] bytearray = new byte[rs.getInt(1)];
int size=0;
InputStream sImage;
sImage = rs.getBinaryStream(2);
response.reset();
response.setContentType("image/jpeg");
while((size=sImage.read(bytearray))!= -1 )
response.getOutputStream().write(bytearray,0,size);
response.flushBuffer();
sImage.close();

Problems starting server from within CFBuilder

Similar Messages

Maybe you are looking for