Startup disk full warning and mac os doesn't load normally

i get a warning while loging into my user acount, since i have 2. It says that my startup disk is full. When i get into my user account, it doesnt load as normal.
the dock doesnt show up, the menu bar and anyother apps doesnt work. i cant work on anything. i need help to resolve this problem.
thanks.

Perhaps you should try updating your system if possible because according to your profile you are running one of the first versions of snow leopard (10.6.1) when you should be running 10.6.8. you can check your version by clicking the apple symbol in the finderbar at the top of the screen. you can also run system preferences from there as well as software update. another possibility is that your dock is set up to auto hide when not in use try dragging your cursor to the middle of the bottom of the screen and wait a couple seconds to see if it appears. my only other solution for you is to back up your files and try reinstalling Mac OS with a larger hardrive if possible.

Similar Messages

My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!

My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!

Did you empty the Trash?
What size hard drive & how much free space. You should always have a minimum of 10-15% or more free space?
 Cheers, Tom

HT1349 when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

Try starting in Safe mode which does not load all the software that is used in a regular boot. It also runs a disk check. After booting in safe mode transfer or trash stuff you don't really need so as to free up disk space. Be sure to hold the shift key down continously till a progress bar shows on the screen.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Startup disk full error - boots normally but won't start finder

I'm having a problem in which my iMac when it boots gives me an error that the startup disk is full, but other than that it can boot normally and allow me to log in, but after that the startup stalls. I never get past the default "outer space" desktop image and finder never starts, so there's no icons, no dock, and nothing on the menu bar. What's weird is that Safari and Mail start and I can see them because I believe I have them starting automatically at boot. Safari works (I'm using it now to enter this discussion). Mail on the other hand starts but is hung checking for the servers for incoming mail.
I've tried to boot in safe mode (holding down Shift key at startup), but it doesn't work.
I've tried to boot in single user mode (holding down cmd-S at startup), but it doesn't work either.
I've tried to boot from Snow Leopard installation media (holding down C at startup), but it doesn't work as well.
Each time I try one of these alternate boot methods, it just takes me to the normal login screen with the startup disk full message. I click OK, login, and get stuck.
I'm just trying to get the finder started so that I can delete some files, but I just can't get that far. It's strange that the browser works perfectly and internet connection is fine, but nothing else works.
Thoughts? Thanks. - Mike

Hi Lina, and welcome to Apple Discussions.
Safe Mode might allow you to boot and free up some space.
If you have access to another Mac and a FireWire cable, another option would be to use FireWire Target Disk Mode to transfer data to the other Mac and delete it on your MBA.
If either way works, you want to open up somewhere around 15% free space. Once you do that, run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).
Ultimately, though, it sounds like you need a larger HD . . . .

What do i need to do when i get a startup disk full error?

What do i need to do when i get a startup disk full error? I can't update software or use my MacAir at all.

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

I keep getting "startup disk full" message even when I already moved all my files/documents to an external hard disk

Dear all,
What should I do? I keep getting the "startup disk full" message even when I already moved all my files and documents to an external hard disk.
Thanks a heap.

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Startup Disk Full Error - Please help

Dear ALL,
I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message.
I have no clue as to how to correctly fix this issue. I looked at my HD and I seem to have 32GB available, which I would have thought would have been ample space. I have started to remove unwanted files and backup to CD large image files. So this should free up some more space. The question is will this be enough to get rid of this issue and is it associated with the amount of HD space on my drive? or would I need to run some script etc? or download/buy some other product to fix this?
Your help is greatly appreciated.
Max

OK I tried Macaroni...and when I tried to work with a TIFF file I get the same Startup Disk is FULL message. The I get an adobe message saying Scratch Disk is FULL.
Any further suggestions would be appreciated.

Adobe Photoshop Scratch Disk Full/Startup Disk Full error - PLEASE HELP

Dear ALL,
I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message. Never happended before.
Since my initial post I downloaded Macaroni (utility) and have run the daily/weekly/monthly backups, checked the /private/var/vm and /private/var/log and /Volumes. Nothing unusual there...
When I started getting this error I had 32GB left on a looked at my HD and I seem to have 32GB available on a 152GB drive. Now after deleting I have 76GB capacity left.
But when I tried to open a Photoshop PSD or TIFF file and do a crop I still get tge Startup Disk is Full error followed by the Adobe Photoshop error Scratch Disk is Full.
I am thinking of running the Disk Utility from the Applications/Utilities/Disk Utility and doing a Verify Disk and Verify Disk Permissions followed by Repair Disk Permissions. I will be logged into the machine whilst doing this. Is there any danger in this as I have read elsewhere that I need to do this from a bootable volume. If that is the case how do I create a bootable disk/cd? If not then what is the cure to my Disk Full as surely there is now nearly 50% FREE!!!!!
Please help.
Max

PS will always use the boot disk for scratch to some extent even with an alternate primary scratch disk.
Be sure to turn off Spotlight as it causes problems.
4GB of RAM would be nice, I understand small files don't work well if there is more than 4GB RAM but large files will. OS X uses free RAM as cache and RAM disk before using disk drives.
How much RAM is allocated to PS? More RAM would help.
A dedicated lean boot drive helps. Install just what is needed for your work, use a separate drive for data, and yet another RAID volume for scratch.
When in doubt, backup with SuperDuper, and do an erase and then restore. Always backup before repairing; and never, ever, use an old version of Tiger CD/DVD - like 10.4.2 on 10.4.7/.8. Use "fsck" instead, or your emergency boot drive.
Also, give Applejack a shot and delete the cache folders and swap files from time to time to keep a system humming. CS/CS2 and Tiger benefit nicely from more RAM.

Startup Disk Full shows up

Dear Sir,
Please help me to solve this problem,
My Macbook Pro shows some errors 'Startup Disk Full',
and the bad thing is,it shows after i on my Macbook and the popup comes up before i can entering the menu,
So what should i do now?

It's after 2am her in the US.
Can you start up in safe mode? If so, empty your trash if there is anything in there. Also, start deleting some files or transfer them to an external disk.
Mac OS X 10.6: Starting up in safe mode
Mac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
Going to bed now. The night owls will need to take over from here if you need further help.

Startup Disk Full Message Keeps Occuring

I'm new at maintaining our Xserve here at work. It seems that each day the serevr gets incapacitated because the Startup Disk space fills up. I keep deleting log files and other files that are temporary, but to no avail. I can free a Gig or 2 then a day or two alter it's full again. Is there something wrong with the configuration?

You found a disk-full message and, well, piled onto the thread. OK. There's a decent shot that there is no connection to the previous disk-full error, too. If you lift the hood and look at the Unix layers, there are a large number of files being written, and many differing triggers for general or for excessive disk consumption.
As was mentioned earlier in the thread, this likely isn't specific to Xserve hardware, and this is probably a generic Mac OS X or Mac OS X Server issue, too; something occurring within the Unix layer of the platform. Something writing a log. Caching. A run-away process. Etc.
Get the [Grand Perspective tool|http://grandperspectiv.sourceforge.net> as a start. That can show you where your space is going.
Also launch Terminal.app and use the shell commands:
find / -size 1k -print+
sudo du -sHh /*
mdfind 'kMDItemFSSize > 10000000'
The first shows files larger than 1K, the second shows disk space. There are commands around to sort this stuff, too; to rank your use as output by du. That last one, the mdfind command, is a (fast) Mac search command that works reasonably well as part of a pipe.
And 150 gigabytes? That's comparatively tiny. I'm running 750 GB drives on servers that are now three years old. Go get yourself actual disk storage devices. Smaller drives can sometimes be used for high performance, but SSD is infiltrating that usage. The tiny SAS disks that were sold with various Xserve boxes were built for speed and bandwidth (as HDDs go), and aren't so good for storage or for sharing the operating system installation with, for instance, users.
And if it's log files, have a look at what's going on as - as is typical with many of these cases - the log can be filling because there's an error somewhere. And the specific trigger for the error can by most anything. Do your due diligence as a Unix server administrator and find your big file(s) and have a look at what's going on with your Unix server, in other words.
Also try a few Google searches, as this problem is a common one, and there are any number of discussions around of various find and du and mdfind and other commands that can be used here. It'd be nice if there was an integrated and GUI-friendly mechanism within Mac OS X, but that's not available; it's add-on or Unix shell commands for now...

Startup disk full on new Macbook Pro

I bought a Late 2013 13 inch 8 gb Macbook Pro to replace a mid 2010 that had hung up during an update and seized up. I migrated a backup of the 2010 to the 2013 and immediately began getting "startup disk full" notices. I mainly use it for pictures and music and very little document type stuff. I have emptied the trash and repaired permissions and emptied email and downloads etc. I can't figure out what is taking up my space. Storage looks like this, 16.94 free of 250.14. Other storage 166 gb, Apps 37 gb, Photos 14 gb, Movies 5 gb, Audio 10 gb. Any suggestions?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Startup Disk Full -- Weird

I'm on my Mac Pro as seen below. My main disk has boot camp partition.
Macintosh HD:
U: 73gb
F: 102gb
Windows:
U: 12gb
F: 3gb
In Photoshop CS3, when doing some light photoshop work, I OSX throws up "Startup disk full" and then CS3 throws "Scratch Disk full." Very strange as you can see my main disk has 102gb of free space. I checked the scratch disk settings in CS3 and confirmed that they are on the right drive.
Any thoughts?

I was having the same issue yesterday, I have since reset Safari (of all things?) and haven't had the issue since. Must be an issue with 10.5.2, it never happened before.

Help: Premiere is making my startup disk full, but I set everything to go on an external hard drive.

The iMac I am using is for the sole purpose of editing and nothing else. I have no idea what is making my startup disk full, and I can not locate the files that are filling the startup disk except the fact that it is telling me I am running out of space. The startup disk is a 250GB SSD, the second internal drive is 1 TB HDD. All of my premiere and video files are loaded ton a 4TB G-RAID.

Do you have your projects set to use a drive other than startup?
My 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

Startup disk full warning and mac os doesn't load normally

Similar Messages

Maybe you are looking for