Startup ldap problem

when trying to start a weblogic server (any server) on linux (wl7.0sp1, linux 7.2
(kernel 2.4.7-10) I get the following error. If I turn off nativeio then the error
goes away. Any ideas?
<Oct 17, 2002 2:21:27 PM EDT> <Error> <EmbeddedLDAP> <171517> <An error occurred
while attempting to get exclusive access to the embedded LDAP data files directory
- ./examplesServer/ldap/ldapfiles. The exception thown is java.io.IOException:
lock error, ./examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok, No locks available,
errno=37.>
<Oct 17, 2002 2:21:27 PM EDT> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:weblogic.server.ServiceFailureException: Error
getting exclusive access to embedded LDAP data files - with nested exception:
[java.io.IOException: lock error, ./examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok,
No locks available, errno=37]
java.io.IOException: lock error, ./examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok,
No locks available, errno=37
     at weblogic.ldap.FileLock.openWithLock(Native Method)
     at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:893)
     at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:204)
     at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:691)
     at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
     at weblogic.Server.main(Server.java:32)
thanks
Joel

We just got a message back from weblogic support, here is there response:
This error is coming because the OS is not able to lock the file.
1) Could you try to remove the following files
<dbname>.tran, <dbname>.trpos, and <dbname>.twpos under the ldap directory for
the server
and try to start the server?
2) If it still does not start, Can you please try to remove the monuted NFS drive
from the picture
and try?
We have seen in case of linux with mounted drive this error occurs.
This is mostly because of the OS lock manager. Could you please verify with your
sysadmin about this?
In order for NFS to work, you would need to make sure that portmap, lockd, and
statd are running. The docs at:http://www.linux.org/docs/ldp/howto/NFS-HOWTO/client.html
, give a good overview of how to set all this up. You need to ensure that the
above processes(lockd, etc) are running. Based on the error message,it is possible
that the above processes were not running.
"Richard Vissers" <[email protected]> wrote:
I am getting the same error (but running in Win2K, WL7.0sp1) and running
NativeIO and have searched all the past newsgroups, BEA's online docs
and
haven't found anything so I am very interested if anyone has an idea.
"Joel Nylund" <[email protected]> wrote in message
news:[email protected]...
when trying to start a weblogic server (any server) on linux (wl7.0sp1,linux 7.2
(kernel 2.4.7-10) I get the following error. If I turn off nativeiothen
the error
goes away. Any ideas?
<Oct 17, 2002 2:21:27 PM EDT> <Error> <EmbeddedLDAP> <171517> <An erroroccurred
while attempting to get exclusive access to the embedded LDAP datafiles
directory
- ./examplesServer/ldap/ldapfiles. The exception thown isjava.io.IOException:
lock error, ./examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok, No locksavailable,
errno=37.>
<Oct 17, 2002 2:21:27 PM EDT> <Critical> <WebLogicServer> <000364><Server
failed
during initialization. Exception:weblogic.server.ServiceFailureException:Error
getting exclusive access to embedded LDAP data files - with nestedexception:
[java.io.IOException: lock error,
../examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok,>> No locks available, errno=37
java.io.IOException: lock error,../examplesServer/ldap/ldapfiles/EmbeddedLDAP.lok,
No locks available, errno=37
at weblogic.ldap.FileLock.openWithLock(Native Method)
at weblogic.ldap.EmbeddedLDAP.ensureExclusiveAccess(EmbeddedLDAP.java:893)
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:204)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:691)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
thanks
Joel

Similar Messages

Win 98SE Startup Logon Problem

All our Win 98SE had the startup logon problem when we migrated to Cisco 1240AP. Previously, we don't had this problem when we are still using the SMC AP.
When we want to login to windows 2000 Domain during startup, the system will complain that it can't find a DC and we had to click ok to proceed. Once login, we can see that it can detect the AP with good signal strength. Then we need to logoff and then only we can login to the Domain without any problem.
But when we restart the system to login to the Domain again, the same problem occurs. Only when you click ok to login without network and then logoff again to login without restart the system, then the PC can find the Domain and login without problem. All our PCs are using the static IP assignment with DNS and WINS configure.
We are currently using the DLink client wireless adapter and we had try to change to Belkin client wireless adapter with more recent Win98 driver but with the same problem.
Our Window XP don't had this issue. As i had said, previously when we are using a SMC AP, we don't had this problem.
Anyone here had the same problem that had a solution ?
Thanks.
CMYip

Yes. The solution was to upgrade to upgrade the customer's laptops to WinXP.
(Drive mappings were also a related issue).

Unresponsive Keyboard and Trackpad problem AT STARTUP + Sleep problem

When I turn on my computer it boots the OS and everything works except for the trackpad and the keyboard. I wait for about 5-7 minutes and then the trackpad and the keyboard start working.
Additional problems:
If I try to sleep my computer, the screen turns off, but the computer never stops working, so I have to force it to shut down.
Temporal Solutions
1) Boot in safe mode, it solves the trackpad/keyboard problems but not the Sleeping problem
Attempted fixes
1) Conencted external keyboard mouse/keyboard. Doesn't work
2) Reset the battery controller.
3) Reinstalled 10.6
4) Installed 10.5
5) Installed 10.6.3
Known Stuff:
1) The trackpad/keyboard are always connected as I can move the mouse and use some gestures with the Better Touch Tool app, and the keyboard works because if I click the Caps Lock key, the small led turns on.
2) Also, I have the HardwareGrowler app which tells me if hardware gets connected or disconnected and it never tells me anything about the trackpad/keyboard getting disconnected.
3) The OS is working at startup because apps show stuff and get updated and I can still get growl notifications.
NOTE: This is an intermittent problem, about 1 out of 10 times I turn on the computer I GET the problem.
Thanks a lot!

I came across a similar issue as the original poster. My trackpad and keyboard are unresponsive for 5 - 7 minutes after startup. I've updated my OS to 10.6.4 twice and it's still happening. I recognized this behavior after the Preferences->Network pane froze while I was trying to remove a VPN setting. Removing /Library/Preferences/SystemConfigurations did not help the problem.
Do any of you have advice on debugging the issue?
windowserver.log
Aug 27 13:35:00 [58] Display 0x4271580: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 de058e87398afe70975928a7b248fe42)
Aug 27 13:42:58 [58] CGXRunOneEventPass: timed out after 175 events with wait time of 0.010000
Aug 27 13:42:58 [58] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x6 not owned by caller Dropbox
system.log
Aug 27 13:42:58 localhost WindowServer[58]: Timeout waiting for IOKit to be quiet

Ldap problem, ORA-06521: PL/SQL: Error mapping function

I am getting this error(s)
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_LDAP_API_FFI", line 0
ORA-06512: at "SYS.DBMS_LDAP", line 1338
ORA-06512: at "SYS.DBMS_LDAP", line 1273
ORA-06512: at "SYS.DBMS_LDAP", line 529
ORA-06512: at line 127
after binding and searching an ldap directory.
Line 127 is:
my_dn := DBMS_LDAP.get_dn(my_session, my_entry);
Both of the 'my_xx' parameters have been successfully set earlier in the script I believe as they produce no errors and DBMS_LDAP.count_entries(my_session, my_message) returns = 1.
I am following the example at:
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96577/smplcode.htm#636994
In fact any of the functions used in the 'while loop' in the above example give a similar error.
Apparently SYS.DBMS_LDAP_API_FFI is a call to an external C program, but this would be a standard Oracle one, not one I have written.
I am connecting to a non-Oracle ldap server, and have tried several (OpenLDAP 2.X, & Windows 2000 AD), with same results.
Any suggestions gratefully received.
Cheers
KIM

Scott,
Thanks for your concern. I should have explained. I am working in HTMLdb, successfully using ldap to authenticate, but now need to get the logged-in user's name and other details. All my attemps to use the wwv_flow_ldap functions have failed, and I am no resorting to DBMS_LDAP to get what I want. I am hoping thatsome helpful person can shed some light on this problem
Cheers
KIM

User migration vom SAP DB to LDAP: Problem when userId not equal to logonId

Hello
I have to write a migration tool which migrates the users stored in the SAP DB to LDAP. Thereby the logon ID of the users in the SAP DB is not equal to the user ID.
The migration works fine and in SAP Identity Management (IDM) everything is ok.
But when I try to log onto the portal with a migrated user, the portal tells me that no portal role is assigned to the user. But the IDM shows clearly that the portal role is assigned to the user.
Investigation showed that when I create in the LDAP a user with the same logon ID and user ID, the log onto the portal works ok. As soon the logon ID differs from the user ID, the portal does not find the assigned portal role anymore, although in IDM everything works.
How can I solve this problem? It is important that the logon ID and the user ID are different as otherwise all the stored data has wrong references.
Greetings
Rolf
Edited by: Rolf Grüninger on Jul 19, 2011 6:08 PM

Problem solved:
The naming attribute of the user account has to be set to the same attribute as the one of the user object and not to the user logon ID.

Open Directory or LDAP Problem with 10.5 Client and 10.4 Server

Yesterday, the client-server setup we've been using successfully FOR YEARS decided not to work on a v10.5.8 MacBook Pro client. Did not do anything to the v10.5 client recently (other than to boot it up). Not sure if any software was updated on the server recently (where do I check for this?). Curiously, a v10.4.11 client running on a Mac Pro (tower) continues to work fine/as though nothing's changed. It appears as though the only difference is v10.4 client (working) vs. v10.5 client (not working).
Here is what IS working:
1) Network Home Directories on dedicated drive partition of Mac running OS X Server v10.4.11. AFP, DNS, and Open Directory are all up and running (normally, I think) as shown in Server Admin application.
2) Mac Pro (tower) client running v10.4.11 binds to and authenticates at v10.4.11 server. Any valid user can access their home directory on the server seamlessly when logging in at this v10.4.11 client Mac.
3) That same v10.4.11 client Mac also contains a LOCAL admin user with its home directory on the local hard drive. That LOCAL admin account is used to update software on a per machine basis (and preclude users from adding unauthorized software, needing to use a specific machine, etc.).
Here is what IS NOT working:
4) On a MacBook Pro client running v10.5.8, the LOCAL admin account looses access to the partition containing its local home directory. The drive partition literally disappears. The only "solution" I've been able to find (and it's not truly a solution) is to turn off the Open Directory/LDAP binding (using the Directory Utility application). With binding turned off, the LOCAL admin user has no problem accessing their home directory on the local hard drive partition. Turn binding on again (using Directory Utility application), and the LOCAL admin user can no longer see its local home directory.
Again, binding is necessary to allow regular users to use the v10.5 MacBook Pro with Network Home Directories (as in items 1-3 above). Binding should be turned on for this reason. However, with binding on, the LOCAL admin user cannot manage the computer because the local partition containing the admin home directory disappears/is inaccessible. Turn binding off, and the partition containing the admin home directory reappears.
Perhaps there's something in the sever logs that will help. I don't really know how to read these, so if your help involves the logs, please refer to them explicitly (e.g., "in Server Admin, go to Open Directory->Logs->LDAP log" or similar).
Any help greatly appreceated.

Nope. Never used sso_util.
I try to use Apple's GUI server management tools unless absolutely necessary/at the end of my rope (i.e., last step before re-install etc.). I figure there's just too many things going on under the hood: using the command line may fix one setting, but not re-configure the two or three others that Apple NEEDS in order to have the whole thing working in harmony. Unless you really know what's going on with all the configuration files, it's best to let the GUI manage the settings.
In my particular circumstance, I've now got ALL Leopard clients, one Leopard v10.5 server, and one Tiger v10.4 server. Everything is working fine now, but it was not a simple matter getting the Tiger v10.4 server re-integrated into the otherwise ALL Leopard environment. OD/Kerberos is on the Leopard v10.5 server. Home directories are still on the Tiger v10.4 server.
Two keys to getting THIS/MY set-up working:
1) Tiger v10.4 server needs to have Open Directory set to "Connected to a Directory System" and has to be joined to the Kerberos realm that was set-up on the Leopard v10.5 server (use Server Admin to do all of this).
2) Sharepoint on Tiger v10.4 server has to have SOME, but NOT ALL checkboxes for guest access enables/checked. See:
http://discussions.apple.com/message.jspa?messageID=10903468#10903468
Number 2 immediately above is contrary to what Apple manual for User Management reads, but this is what worked for me/my set up, after pulling my hair out following the manual's instructions to the letter and not getting the thing to work!

OBIEE and LDAP problem

Hi all!
After connecting our OBIEE 11.1.1.5 to LDAP we faced with a strange problem: after one user enters the system any next user logged in has the same privileges in OBIEE as the first one.
We turned off the following caches:
- WebLogic Principal Validator Cache in a security realm Performance section
- Group Membership Lookup Hierarchy Caching in our LDAP authentication provider Performance section
But the problem still occurs. Does anyone have any suggestions on this?

Hi I was having endless issues with OBIEE and LDAP, I followed the exact steps here:
http://docs.oracle.com/cd/E17904_01/web.1111/e13707/atn.htm#SECMG169
These worked for me, so you could check for a start these recommended setting are same in your environment.
Thanks

Update LDAP problem using SPLDAP_RECEIVE_ATTRIBUTES

Hi Friends,
I can create new data records in LDAP but when i try to update these records i get following error :
type id number message
E |LDAPRC |053 |LDAP server cannot execute operation
Does anyone has any idea about this?
Thanks.

I am getting the same problem. Can anyone tell us what is going on?

Preflight Droplet/Acrobat Startup Automation Problems

Hello,
We're experiencing some problems regarding preflight droplets not being executed for some instances when the Acrobat XI application
(Acrobat Pro XI and Windows XP) is not yet opened before the preflight droplet is executed (Acrobat is started/opened due to the preflight droplet call but it doesn't execute the preflight droplet anymore).
If Acrobat is not yet opened and we executed the droplet, Acrobat opens and loads but the preflight action is not executed (we waited for a long time thinking Acrobat is still warming up but nothing really happens), we tried executing preflight droplet again (with the opened faulty Acrobat) and still does nothing. We needed to close Acrobat and reopen manually before we execute the preflight droplet for it to work again. Note that we are executing the preflight droplet using the commandline using our program (java) and not using drag and drop. Seems Acrobat is still initializing so it wasn't able to queue the preflight process... Note though that this does not happen all the time.
Can anyone from Adobe check if this is a known issue?
Currently, the only resolution is to manually open Acrobat and open the preflight window and let it initialize and close the preflight window again and leave acrobat open before executing executing the droplet (which is a bit troublesome if we want to automate opening Acrobat when server is restarted or just turned on)
Please advise if there is a fix for this? Or is there a way to initialize the preflight preferences on startup of Acrobat via commandline line or any other option.
we can try to execute a script/bat file to start up Acrobat + initialize its preflight preferences before executing our program (though we're not sure if initializing the preflight preferences can be automated on startup of Acrobat).
Thanks

Hello,
We're experiencing some problems regarding preflight droplets not being executed for some instances when the Acrobat XI application
(Acrobat Pro XI and Windows XP) is not yet opened before the preflight droplet is executed (Acrobat is started/opened due to the preflight droplet call but it doesn't execute the preflight droplet anymore).
If Acrobat is not yet opened and we executed the droplet, Acrobat opens and loads but the preflight action is not executed (we waited for a long time thinking Acrobat is still warming up but nothing really happens), we tried executing preflight droplet again (with the opened faulty Acrobat) and still does nothing. We needed to close Acrobat and reopen manually before we execute the preflight droplet for it to work again. Note that we are executing the preflight droplet using the commandline using our program (java) and not using drag and drop. Seems Acrobat is still initializing so it wasn't able to queue the preflight process... Note though that this does not happen all the time.
Can anyone from Adobe check if this is a known issue?
Currently, the only resolution is to manually open Acrobat and open the preflight window and let it initialize and close the preflight window again and leave acrobat open before executing executing the droplet (which is a bit troublesome if we want to automate opening Acrobat when server is restarted or just turned on)
Please advise if there is a fix for this? Or is there a way to initialize the preflight preferences on startup of Acrobat via commandline line or any other option.
we can try to execute a script/bat file to start up Acrobat + initialize its preflight preferences before executing our program (though we're not sure if initializing the preflight preferences can be automated on startup of Acrobat).
Thanks

LDAP problems

Hi,
I'm sorry for crossposting this question to three different groups, but
I have security and personalization related problem with commerce
server, so I couldn't decide where to post...
I'm designing LDAP-schema for a company piloting Commerce Server. I'm
not a programmer, but I'd need to know little something about WebLogic
LDAP-use in order to create usable schema. I afraid (actually I'm
sure), that if I design the LDAP-schema based on customer's other needs,
it probable that WL/PS/CS can't use LDAP-directory.
I have studied Weblogic documentation, but it doesn't explain
LDAP-issues very clearly. Setting up LDAPrealm and using LDAP for
authentication and having groups in LDAP is OK. Also digging out
information from LDAP-directory using LDAP-api (or JNDI) is OK. I try to
find out, what LDAP-functionality WL/PS/CS support "out-of-a-box"
without too much additional programming.
Local BEA people haven't been able to answer my questions within the
week, so I thought I try to find experts from here.
Questions:
1. Personalization Server 2.0.1 manual "Creating and Managing Users"
talks about "registering user/group attributes for retrieval from LDAP".
Could someone explain for non-programmer, what this means in practise?
Registration must mean some "automatic" retrieval, because with JNDI I
can acces any attribute anyway.
2. Properties and rules - how these relate to LDAP-directory? Can I
define rules, which use "automatically" retrieved LDAP-attributes?
3. Are there LDAP-related restrictions given by WL? For example
- If uid is used for authentication, do I have to use uid in RDN
also?
- Can I have users stored in many LDAP-branches like
"OU=dep1,OU=people,O=acme.com", "OU=dep2,OU=people,O=acme.com"?
4. Do I loose some features if using LDAP-directory instead of
relational database?
All comments are appreciated very much.
Jari
Jari Pirhonen
-- [email protected]
-- "All work and no play makes Jack a dull boy"

j> Local BEA people haven't been able to answer my questions within
j> the week, so I thought I try to find experts from here.
I can't answer your Commerce or Personalisation questions, but I can
help with some others.
j> If uid is used for authentication, do I have to use uid in RDN
j> also?
Probably.
j> Can I have users stored in many LDAP-branches like
j> "OU=dep1,OU=people,O=acme.com", "OU=dep2,OU=people,O=acme.com"?
Not at present. All of your users have to be in one branch of the
tree, as do all of your groups (through the user and group branches
can be different).
j> Do I loose some features if using LDAP-directory instead of
j> relational database?
You can't store WebLogic ACLs in an LDAP database.
<b
Let us pray:
What a Great System.
Please Do Not Crash.
^G^IP@P6

Web Proxy Server & Secure LDAP Problem

Hi,
I'm currently trying to interface a test system with SunONE Web Proxy 3.6 SP4 with a SunONE DIrectory Server 5.2 system. Using unencrypted LDAP, things worked fine.
After creating a test certificate on the Directory Server, I reconfigured the Proxy to use SSL LDAP. Within the Administration Server of the proxy, communications with the SSL-enabled LDAP port looks fine and I am able to download the user/group lists from the directory server. Similarly, the ldapsearch tool works fine. However, the proxy instance itself does not even want to start, reporting the following problem(s):
[30/Mar/2004:13:49:24] info: ldap_pool: ldapu_pool_init() : can't contact server <bovproxy.bov.com>
[30/Mar/2004:13:49:24] security: ldap subsystem: ldap server(s) unreacheable. Acl evaluation may fail.
[30/Mar/2004:13:49:24] info: LdapCheckUp set to 30 seconds
A netstat whilst the proxy is starting reveals that the system does open ports with the LDAP server ok. I've tried various things without success. Any ideas/suggestions would be really welcome.
Thanks,
Herbert

Hi, Can you just guide how to setup this kind of scenario. I mean to say
im using solaris 9 X86 and i have to setup webproxy server (for internet connection sharing) and LDAP. The users should enter username and password for accessing internet. If you dont mind where can i get the documenattion on this. Please help me in this issue as im new bie in Solaris World.
Thanks in Advance
R. Venkat Sharma

Weblogic startup class: problem calling EJB's

Has anyone ever experienced a problem in using a startup class (registered in weblogic.properties)
and tried to lookup and use an EJB in the same application?
Basically, I have a startup class which registers to receive messages from an
MQ queue, and when it receives a message, it tries to do a lookup of a bean and
use it, but I receive a 'NullPointerException'.
I'm running Weblogic 5.1
(I know that Weblogic 6.0 makes use of MessageDrivenBeans, but my app isn't using
6 or EJB 2.0)
Thanks...

Can you post weblogic.log? Are you sure that EJB was deployed successfully.
Also comment the PROVIDER_URL in initial context and see if that solves the problem
Viresh Garg
BEA Systems
shaun wrote:
The exception is simply a 'NullPointerException' coming from the startup class
(I don't have the old log file or I would include the trace here.). Basically,
when my startup class receives a call to the onMessage(...) method (from listening
for messages), it looks up an EJB on the server, through the InitialContect class
and gets a 'null' returned back, thereby throwing the NullPointerException.
If anyone else is successful in having a startup class which can lookup and call
an EJB within the same Weblogic server, please help.
Thanks again....
Viresh Garg <[email protected]> wrote:
Can you post the exception stack trace? Also what exactly are you doing
in startup class.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Shaun wrote:
Has anyone ever experienced a problem in using a startup class (registeredin weblogic.properties)
and tried to lookup and use an EJB in the same application?
Basically, I have a startup class which registers to receive messagesfrom an
MQ queue, and when it receives a message, it tries to do a lookup ofa bean and
use it, but I receive a 'NullPointerException'.
I'm running Weblogic 5.1
(I know that Weblogic 6.0 makes use of MessageDrivenBeans, but my appisn't using
6 or EJB 2.0)
Thanks...

MI Client 7.0 startup classpath problem

hi experts,
I have installed jdk1.5.0_11 and MI Client 7.0 on my system. Now when-ever i try to start my client it shows me an error "Time out 61, cannot connect to server ". I have run the "startup.bat" file in cmd and it shows following trace.
C:\Program Files\SAP Mobile Infrastructure>startup.bat
C:\Program Files\SAP Mobile Infrastructure>set ME_HOME=C:\Program Files\SAP Mobi
le Infrastructure
C:\Program Files\SAP Mobile Infrastructure>set JAVA_OPTIONS=
C:\Program Files\SAP Mobile Infrastructure>set JAVA_EXE=1\bin\java.exe
C:\Program Files\SAP Mobile Infrastructure>set JAVA_HOME=1
C:\Program Files\SAP Mobile Infrastructure>REM set bootstrapjars=;
C:\Program Files\SAP Mobile Infrastructure>set bootstrapjars=C:\Program Files\
SAP Mobile Infrastructure\lib\system\crimson.jar;C:\Program Files\SAP Mobile Inf
rastructure\lib\system\jaxp.jar;C:\Program Files\SAP Mobile Infrastructure\lib\s
ystem\xalan.jar;
C:\Program Files\SAP Mobile Infrastructure>REM SET JAVA_HOME=
C:\Program Files\SAP Mobile Infrastructure>REM SET ME_HOME=
C:\Program Files\SAP Mobile Infrastructure>REM SET JAVA_EXE=
C:\Program Files\SAP Mobile Infrastructure>REM SET JAVA_OPTIONS=-mx256m
C:\Program Files\SAP Mobile Infrastructure>SET _OLDCP=C:\Program Files\Java\jre1
.5.0_11\lib\ext\QTJava.zip
C:\Program Files\SAP Mobile Infrastructure>set _MEJARS=
C:\Program Files\SAP Mobile Infrastructure>copy /b "C:\Program Files\SAP Mobile
Infrastructure\SetMejar.txt" + "C:\Program Files\SAP Mobile Infrastructure\listO
fJars.txt" "C:\Program Files\SAP Mobile Infrastructure\setMeJar.bat"
C:\Program Files\SAP Mobile Infrastructure\SetMejar.txt
C:\Program Files\SAP Mobile Infrastructure\listOfJars.txt
1 file(s) copied.
C:\Program Files\SAP Mobile Infrastructure>call "C:\Program Files\SAP Mobile Inf
rastructure\setMeJar.bat"
C:\Program Files\SAP Mobile Infrastructure>SET _MEJARS=C:\Program Files\SAP Mobi
le Infrastructure\lib\crimson.jar;C:\Program Files\SAP Mobile Infrastructure\lib
\jasper.jar;C:\Program Files\SAP Mobile Infrastructure\lib\jaxp.jar;C:\Program F
iles\SAP Mobile Infrastructure\lib\MEg.jar;C:\Program Files\SAP Mobile Infrastru
cture\lib\pinstall.jar;C:\Program Files\SAP Mobile Infrastructure\lib\servlet.ja
r;C:\Program Files\SAP Mobile Infrastructure\lib\webserver.jar;
C:\Program Files\SAP Mobile Infrastructure>set _SSLJARS=
C:\Program Files\SAP Mobile Infrastructure>if exist "C:\Program Files\SAP Mobile
Infrastructure\lib\jsse.jar" set _SSLJARS=C:\Program Files\SAP Mobile Infrastru
cture\lib\jsse.jar
C:\Program Files\SAP Mobile Infrastructure>if exist "C:\Program Files\SAP Mobile
Infrastructure\lib\jcert.jar" set _SSLJARS=;C:\Program Files\SAP Mobile Infrast
ructure\lib\jcert.jar
C:\Program Files\SAP Mobile Infrastructure>if exist "C:\Program Files\SAP Mobile
Infrastructure\lib\jnet.jar" set _SSLJARS=;C:\Program Files\SAP Mobile Infrastr
ucture\lib\jnet.jar
C:\Program Files\SAP Mobile Infrastructure>set _IAKJARS=
C:\Program Files\SAP Mobile Infrastructure>if exist "C:\Program Files\SAP Mobile
Infrastructure\lib\system\jdk13\iaik_jce.jar" set _IAKJARS=C:\Program Files\SAP
Mobile Infrastructure\lib\system\jdk13\iaik_jce.jar
C:\Program Files\SAP Mobile Infrastructure>if exist "C:\Program Files\SAP Mobile
Infrastructure\lib\system\jdk13\iaik_javax_crypto.jar" set _IAKJARS=C:\Program
Files\SAP Mobile Infrastructure\lib\system\jdk13\iaik_jce.jar;C:\Program Files\S
AP Mobile Infrastructure\lib\system\jdk13\iaik_javax_crypto.jar
C:\Program Files\SAP Mobile Infrastructure>set CLASSPATH=C:\Program Files\SAP Mo
bile Infrastructure\lib\crimson.jar;C:\Program Files\SAP Mobile Infrastructure\l
ib\jasper.jar;C:\Program Files\SAP Mobile Infrastructure\lib\jaxp.jar;C:\Program
Files\SAP Mobile Infrastructure\lib\MEg.jar;C:\Program Files\SAP Mobile Infrast
ructure\lib\pinstall.jar;C:\Program Files\SAP Mobile Infrastructure\lib\servlet.
jar;C:\Program Files\SAP Mobile Infrastructure\lib\webserver.jar;;C:\Program Fil
es\SAP Mobile Infrastructure\lib\system\crimson.jar;C:\Program Files\SAP Mobile
Infrastructure\lib\system\jaxp.jar;C:\Program Files\SAP Mobile Infrastructure\li
b\system\xalan.jar;;;C:\Program Files\SAP Mobile Infrastructure\lib\system\jdk13
\iaik_jce.jar;C:\Program Files\SAP Mobile Infrastructure\lib\system\jdk13\iaik_j
avax_crypto.jar;1\lib\tools.jar
C:\Program Files\SAP Mobile Infrastructure>echo Using CLASSPATH: C:\Program File
s\SAP Mobile Infrastructure\lib\crimson.jar;C:\Program Files\SAP Mobile Infrastr
ucture\lib\jasper.jar;C:\Program Files\SAP Mobile Infrastructure\lib\jaxp.jar;C:
\Program Files\SAP Mobile Infrastructure\lib\MEg.jar;C:\Program Files\SAP Mobile
Infrastructure\lib\pinstall.jar;C:\Program Files\SAP Mobile Infrastructure\lib\
servlet.jar;C:\Program Files\SAP Mobile Infrastructure\lib\webserver.jar;;C:\Pro
gram Files\SAP Mobile Infrastructure\lib\system\crimson.jar;C:\Program Files\SAP
Mobile Infrastructure\lib\system\jaxp.jar;C:\Program Files\SAP Mobile Infrastru
cture\lib\system\xalan.jar;;;C:\Program Files\SAP Mobile Infrastructure\lib\syst
em\jdk13\iaik_jce.jar;C:\Program Files\SAP Mobile Infrastructure\lib\system\jdk1
3\iaik_javax_crypto.jar;1\lib\tools.jar
Using CLASSPATH: C:\Program Files\SAP Mobile Infrastructure\lib\crimson.jar;C:\P
rogram Files\SAP Mobile Infrastructure\lib\jasper.jar;C:\Program Files\SAP Mobil
e Infrastructure\lib\jaxp.jar;C:\Program Files\SAP Mobile Infrastructure\lib\MEg
.jar;C:\Program Files\SAP Mobile Infrastructure\lib\pinstall.jar;C:\Program File
s\SAP Mobile Infrastructure\lib\servlet.jar;C:\Program Files\SAP Mobile Infrastr
ucture\lib\webserver.jar;;C:\Program Files\SAP Mobile Infrastructure\lib\system\
crimson.jar;C:\Program Files\SAP Mobile Infrastructure\lib\system\jaxp.jar;C:\Pr
ogram Files\SAP Mobile Infrastructure\lib\system\xalan.jar;;;C:\Program Files\SA
P Mobile Infrastructure\lib\system\jdk13\iaik_jce.jar;C:\Program Files\SAP Mobil
e Infrastructure\lib\system\jdk13\iaik_javax_crypto.jar;1\lib\tools.jar
C:\Program Files\SAP Mobile Infrastructure>"1\bin\java.exe" -DSERVER_IMPL="com.
sap.tc.webdynpro.serverimpl.me.MEServerImplementation" -Duse.repository=noDB com
.sap.ip.me.core.Startup "-home:C:\Program Files\SAP Mobile Infrastructure"
The system cannot find the path specified.
C:\Program Files\SAP Mobile Infrastructure>SET CLASSPATH=C:\Program Files\Java\j
re1.5.0_11\lib\ext\QTJava.zip
i have set the classpath variable as
CLASSPATH = C:\Program Files\Java\jre1.5.0_11\lib\ext\QTJava.zip.
The location pointed by classpath for QTJava.zip file is correct, then too its showing me this error.
Please let me know what i should do to get it resolved.
Thanks in advance,
regards,
rajesh
Edited by: RAJESH SHINDE on Jun 20, 2008 12:35 PM

Hi,
this is your error:
C:\Program Files\SAP Mobile Infrastructure>"1\bin\java.exe" -DSERVER_IMPL="com.
sap.tc.webdynpro.serverimpl.me.MEServerImplementation" -Duse.repository=noDB com
.sap.ip.me.core.Startup "-home:C:\Program Files\SAP Mobile Infrastructure"
Please open the startup.bat file. Check the values for JAVA_EXE and for JAVA_RUNTIME (or so). You find them both at the beginning. One tells you simply '1' - should be the JAVA_EXE. Set it correctly to the value of your system and it will work fine in the future. Most likely it is a problem of the installer - but with this manual change it will work for you.
Regards,
Oliver

Address book ldap problems

Hi. My organization uses a domain controller server on port 3268 for ldap/GAL access. In the past I have had intermitant problems accessing the GAL through address book and the mail app. The last time this happened I trashed some pref files and got it working again. Since upgrading to Mountain Lion, it is not working again. I've tried trashing various plist files, but none have seemed to help. I've been doing this over the last few weeks so I can't specifically list which plist files I've tried.
If anyone has a solution or any suggestions I would appreciate it. If there is a way to see at what level it is failing that would be helpful too. It does not show up in the Mail activity window.
Thanks

Hi Jay,
It is a Outlook 2003 problem.. the way around it is:
Open registry editor.
a. Find the following registry key.
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook
b. Edit --> New -->Key
c. Input "ldap" and press Enter key.
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook\LDAP
1.Edit --> New -->[DWORD]
6. Input "NoDisplayNameSearch" ane press Enter key.
7. Right click the above and click "change".
8. Input "1" to [data value] and press [OK]
9. Edit --> New -->[DWORD]
10.Input "DisableVLVBrowsing" and press Enter key
11. Right click the above and click "change".
12. Input "1" to [data value] and press [OK]
13. Close the registry editor.

Powerbook G3 Startup Volume problems

I am using a G3 Pismo Powerbook I bought off eBay. It's a 500 Mhz G3 and it's been upgraded to 1 gig of Ram and a 100 gig hard drive. It came with OS 9 and Tiger installed on it, but I wanted to do my own clean install and I ended up using XPostFacto to install Tiger on it. It runs okay, but the problem is it only boots if I press Option-Command-Shift-Delete during startup, which bypasses the primary startup volume. If I press and hold C to try and boot from a OS 9 CD nothing happends and if I hold Option it hangs on a screen with a refresh button my volume icon and a next button.
Any Ideas?

sean,
It sounds like the Pismo's DVD-ROM drive is at fault here. If the Tiger DVD has "Update" any place on the label, it will not install a fresh Tiger OS. The "Update" Tiger DVDs are used to update a previous version of OSX to Tiger, i.e Panther/10.3.x to Tiger/10.4 (not sure if it will update Panther/10.2). The bottom line...you must have the previous version on the HD in order to run the Update DVD.
The Pismo with a PowerPC CPU can boot 9.x from the USB port but NOT OSX; this only became available the new Intel Macs. See if you can get 9.x to boot from the USB external DVD-ROM. Power on the USB drive with the 9.x CD in place, then restart while pressing the 'option' key. If the USB drive is available as a boot drive along with the internal HD, give it a try. However, don't erase the HD or install 9.x until you have a solution for OSX.
Do you have another Mac with a PowerPC CPU (G3, G4 or G5) that is compatible with Tiger and also running Tiger? If so, there is a way to install Tiger from this computer...please post back with details.

Startup ldap problem

Similar Messages

Maybe you are looking for