Startup Repair Offline: Unable to fix problem and beep codes
Hi,
I have an issue with my PC startup and boot,
My PC Model: Lenovo H330, Windows 7, i5 Intel processor.
Basically on the first attempt at booting, my pc plays a beep code which sounds like = 'beep-beep' + 'beep-beep-beep' followed by a blank screen, on a second attempt the pc boots fine.
I believe this is 1 long and 3 short, the code does not seem to be in the Lenovo Bios support guide to beep codes, not only this but when I attempt Startup Repair in order to fix the problem it states it has
failed to fix the problem, details below:
Problem Event Name: Startup repair offline
PS1: 6.1.7600.16385
PS2: 6.1.7600.16385
PS3: unknown
PS4: 268
PS5: Autofailure
PS6: 1
PS7 No Root Cause
Local ID: 1033
Further Information:
- Information on the failure to repair states error code 0x490
- Before the issue started, AVG Free Antivirus 2015 lost active components and I was unable to update or turn components back on; at the same time it proved to be very difficult to uninstall.
Really need help with this thanks!
Hi Eli,
I agree with ZigZag ,you may need to resolve the beeps code first .The machine may suffer a hardware issue .
For the error code 0x490:
Here is a link for reference of reference :
Windows 7 Startup Problem - Error code 0x490
https://social.technet.microsoft.com/Forums/windows/en-US/299b227b-fa38-4902-b41a-d868075d763e/windows-7-startup-problem-error-code-0x490
First of all ,follow Parvesh_s`s answer ,check the BIOS settings .We may need to reset the BIOS settings to have a check.
If the issue persists ,take the KrisM771`s method to repair with an installation media.
If the auto repair will not work ,take the alebcay`s suggestion .Repair it with the command .
Best regards
Similar Messages
-
My iMac goes to disc utilities on startup, repair disk doesn't cure it and I can't reinstall Mountain Lion because I don't remember my ID and password at the time I bought the software the system isn't accepting my current details and Apple isn't recognising the answers to my security questions. They don't even seem to have my correc date of birth so I can't progress the reinstallation. I'm currently abroad and have my iMac with me but with no way of contacting Apple that I can find, I'm at a loss and very reluctant to pay £35 to try and get my ID and pasword sorted out given that their system recognises my current details. can anyone help please?
AGwhen they gifted me the mountain Lion software several years ago.
Mountain Lion was introduced in July 2012. Did the people who gifted you possibly use their Apple ID for the purchase of your OS? If you used your own Apple ID, you should have simply used the one you use for all things app store. The problem with any purchase at the app store is: whatever Apple ID was used to purchase, it willl stay tied to that Apple ID forever. And, purchases from the app store are not transferable.
So, you can check with the person(s) who gifted you or spend $20 to buy it - or, if your hardware is compatible with the new OS Mavericks, you could download it and associate it with your Apple ID.
FWIW, according to the licensing agreement, the OS remains the property of Apple and you are only granted a license to run it. -
Acrobat XI, XP, startup message-Adobe has encountered a problem and must close
Acrobat XI, XP, startup message-Adobe has encountered a problem and must close
Uninstalled Acrobat 9
Restarted computer
Loaded Acrobat XI
Start Acrobat XI
Produces - Adobe has encountered a problem and must closeInitially installed Acrobat IX with trial selected
(Acrobat activation code was not entered)
As suggested:
Uninstalled Acrobat
Ran Acrobat cleaner
Disabled antivirus
Restarted Computer
Loaded Acrobat IX with trial selected
Restarted Computer
Attempted to open Acrobat and received
Adobe has encountered a problem and must close
To avoid any activation issues
Uninstalled Acrobat
Ran Acrobat cleaner
Confirmed antivirus, disabled
Restarted Computer
Installed Adobe Reader IX
Restarted Computer
Attempted to open Adobe Reader and received
Adobe Reader has encountered a problem and must close -
Is Verizon unwilling or unable to fix problem with Account Owner(s)
A forum or Google search reveals several customers unhappy with how Verizon treats the account owners... count me as one. I'm sure there are many more customers who were equally unhappy but just accept Verizon's incompetence and complete the unnecessary gymnastics of un-registering accounts and then re-registering with a new username.
PROBLEM:
There are numerous scenarios that can cause a My Verizon account to have the Account Owner be listed with an incorrect telephone number. In my case, I had an account with AT&T and 3 additional numbers associated. As each account expired, I transferred the numbers to Verizon. The first account transferred was my 14yr old son. I registered a My Verizon account for management (my name & my userid) and eventually added the additional numbers, however, the Account Owner's phone number is listed as my son's cell.
Over the past 2 years (since I migrated to Verizon), I've had small problems with account notifications and other information being text to my son's cell. I've called numerous times and customer service says it's corrected, but eventually the problems return. Recently, I upgraded my phone and started using some new services like Backup Assistant and the fact that the Account Owner is associated with an incorrect number has caused even more trouble.
I simply want to keep my existing username for My Verizon and correct the cell phone number associated as the Account Owner. This should be extremely simple.
VERIZON'S SOLUTION:
"We can't do it". "Our systems don't allow us to make this change".
The Customer Service Department (or Lack of Customer Service Department) tells me that since they can't or are unwilling to do the necessary changes, their only solution is to force their customer to do their work. They will un-register the account and I can register again. There is no concern for the preferences of an existing customer (almost 3 years); there is no concern for the inconvenience caused to an existing customer who spends hundreds of dollars each month and thousands of dollars each year (I currently have 2 separate accounts with Verizon, 4 phones on my problem account and 4 phones on another for a total of 8 phones with data plans... do the math); there is no concern that I will now have to use a completely different username one that is no longer uniform with my other accounts; there is no concern that I will have to change any and all services that reference My Verizon. Quite simply... Verizon Wireless shows their Account Owners that they have no concern for us.
PROPER SOLUTION:
I have almost 25 years of Information Technology experience and over 3 years working with Call Centers (similar to Verizon's Customer Service), which explains in part why I find this so frustrating... the fix for this is SIMPLE!!! The real problem is that Verizon simply doesn't care enough to fix it because we are existing customers and not new customers.
Without going into specifics (nor could I since I don't have access to their systems), data for the My Verizon portal is contained within modifiable databases. These relational databases will be tied to other systems and other databases, but a modification of this type would just require that the portal be allowed to make the update to the appropriate field(s) within the appropriate database(s). If direct access is not attainable because of their design, it is still not too difficult to write an additional process to accommodate this change. These types of things are done everyday.
More importantly, even if Verizon was unable or unwilling to make these programming changes... I have no doubt that if Customer Service has an escalation process to their I.T. Department that a programmer with access to the application(s) and/or database(s) could easily make the change directly and almost immediately.
CONCLUSION:
Until now, my experience with Verizon has been mostly positive even to the point of recommending the carrier to friends and family. I've found their coverage area to meet my needs and the data speeds to be more than satisfactory. However, Verizon needs to remember that cellular service has essentially become a commodity and that customer retention is often based on other things than simply providing dial tone. With a monthly cell phone expense that rivals a car payment, I would think that Verizon would be more than willing to accommodate such a simple request to maintain a satisfied customer.
If you too are one of the many customers having issue with modifying the Account Owner, just resolve yourself that it appears Verizon is unwilling to make the simple correction to the My Verizon portal to satisfy our request.I'm not 100% sure that I follow your reasoning, so please correct me if I misstate your opinions. I've numbered them so it will be easier to identify any mistakes I make.
1. Not allowing a user, customer service representative, or any Verizon representative to change the cell phone number associated with the Account Owner to another cell phone number on the same account is a security risk.
I'm not suggesting that I be allowed to change the name, social security number, or any other pertinent details related to establishing the original account. All the information pertaining to who is responsible for the bill remains the same with the single exception that the current associated cell phone number be changed to another number already listed on the account. In what possible manner is this a security risk? Frankly if the ability was enabled and someone either by mistake or incompetence made such a change the impact would simply be what I'm currently experiencing (inconvenience). Since in this hypothetical situation the ability to change this value is enabled, the "inconvenience" would easily be re-mediated by returning the value to its original state.
Furthermore, if there is some "security risk" that I'm over looking then an organization that is concerned about providing quality customer service would create procedures to accommodate customer requests and meet security requirements. Let's use a bank (with an obvious security vulnerability) and debit cards as an example. If I lose my debit card, I cannot go to my computer and print out a temporary debit card (very user friendly, but not secure). Some banks will allow you to go online and cancel the lost debit card while requesting a new one to be mailed to the address you have on file (user friendly and mostly secure). To solve this same problem at other banks might require you to go into the office and sign a form cancelling the lost debit card and confirming the address to mail you a new one (less user friendly, but highly secure). The Verizon equivalent, is me requesting that I add an existing bank account to my online banking and being told "We can't do it". However, because the bank cares so much about keeping me as a customer... they will delete my account, allow me to create another, possibly losing my historical data, have me change my username that I've been using for years, spend time adding all my online bill payments... all for the pleasure of staying their customer and getting to use their services as they should have been designed.
2. Making a software change that would allow users or CSR's to associate a different cell phone number on the account to the current Account Owner would be difficult and require downtime.
You give some time expounding this thought and I'm unaware of your web, application, and/or database experience... but I will try to address your concerns later. However, let's assume that you are correct and these changes will be difficult ("taking weeks to months"). The purpose of my post was whether Verizon was unwilling or unable to accommodate this customer request. You seem to be agreeing that Verizon is unwilling to make these changes, or at the very least, feel that Verizon has decided that the time and expense involved is of more importance than correcting an issue impacting their customers. I personally find the later equally disheartening as this has been an issue for many customers (you yourself mention experiencing the problem) and has been well documented through previous forum and Internet posts. Even by your estimations, if they had taken previous customer complaints seriously... this would have been fixed by now. Once again it seems the obvious answer is that Verizon may not consider customer service as an important factor as I do.
As far as your technology issues, I agree that more than a web page change would be required. I do take issue with comparing the change of a distributed application (operating system) that must be designed to support enumerable hardware components to the work required to makes changes to a web portal with a back-end in-house database. You could write an entire book detailing the differences between these two scenarios as they have very little in common, but I'll try to keep it focused to your points.
Coding
Coding an Operating System that must run on literally a multitude of hardware configurations and support an unending diversity of applications is an incredible endeavor and really never a finished product. Changes to an OS are constantly being made and the developers must consider hardware and software that they are not intimately familiar and occasionally even deal with 3rd parties to facilitate changes.
The change I'm advocating has a web component which would be replicated throughout their web server topology, however, these are items that Verizon's developers deal with routinely (if not daily). There are a very limited number of 3rd party concerns (a few different browsers, IE, Chrome, Mozilla & a disparate platforms such as PC, tablet, phone). A little research in the benefits of web portals (and cloud computing) verses distributed applications will clearly outline the drastic differences. A simple illustrative question (though maybe not a completely fair analogy) is how many people do you know who can code an operating system and how many people get on GoDaddy and create their own web pages. I'm not trying to insinuate that anyone who knows a little HTML can make the web portal changes, however, this isn't a difficult project for an experienced developer.
The bigger issues and ones that I alluded to in my original post are the changes that would be required to Verizon's back-end databases. The changes that would need to be made mostly likely involve multiple databases and assuming they are using a typical relational database design might require changes to key fields, adding new databases/tables, and exhaustive integrity checks. This isn't something that an average user could sit down and accomplish in an hour, however, these are simply the routine day-to-day duties of any professional database developer.
Again I reiterate... this change simply involves allowing someone (either a user, CSR, or other Verizon agent) to readily change an index record or records that correlates Account Owner to cell phone number. In terms of database management this should be simple.
Debugging & Deployment
The debugging/testing of changes made to an Operating System are amazingly complex for all the aforementioned reasons. The deployment of such changes is even more complex in that you've got to develop the mechanism to push these changes out to the entirety of the user community. I'll address deployment (or as you said dispersal) of this change because it's the easiest... quite simply there isn't one. The benefit of having a centralized web portal like My Verizon is that users come to you, not the other way around, and any change made will immediately be accessible by the user community. There is a deployment aspect in that My Verizon doesn't exist on a single web server, but again this is just the typical topology for a portal of this size and not relevant to our discussion. Debugging/Testing is an important aspect of any change and certainly Verizon has this methodology in place, however, I'll reiterate that this change should not be complex and shouldn't require extensive testing. We've also already discussed the fact that any debugging/testing only has to take place on a limited number of platforms.
Downtime
If adding the ability to change the relationship of the Account Owner to an associated cell phone number requires any downtime... the person responsible for Verizon's Development, Beta, and Production environments should be fired. There is simply no way this is even a possible concern. I've dealt with many companies with far less resources than Verizon and I assure you that changes of this nature would never require down time. I'm sure they have staff in place whose sole responsibility is to work on their continuity plan. This is a non issue.
Other Carriers
You can't possibly know how all carriers operate, though you may have some past experience with other companies. I would contend (and maybe I'm too optimistic) that a company with a focus on customer satisfaction when made aware of complaints and/or limitations in their service would seek to rectify the issue. It's quite possible that whatever other company you are referencing has fixed this issue if indeed it was similar... especially since I've hopefully bolstered my opinion that the resolution is not overly complicated.
Would you mind telling me if you deleted your 2 original comments to my post before I had an opportunity to answer? The reason I ask is that last night another user (jimfitzgerald) had posted a comment and I replied. He later posted a 2nd comment and while writing my response... all the posts were removed (his 2 posts, my reply, and your 2 posts). I'm curious if this was just a user withdrawal (though I really wish my response had remained in the thread), if there was some sort of technical issue with these forums last night, or if my response was deleted for cause by Verizon or other admin. Thanks! -
It's mindboggling that one must have two email accounts (original and rescue) just in case we don't have a record of the passwords or we use the right ones and Apple program is having a problem.
Our son set up his account and answered a simple security question of "Where did your parents meet?" It isn't a multiple answer question and Apple will no longer accept the correct answer. He had the answer to the other two questions and again, the Apple program has erred and has now locked him out.
A call to Apple was completely unsuccessful with correcting the situation.
We, 1) know the answers to the questions, 2) we have all the proof of purchases that for some reason Apple cannot link to our account which to me is just unbelievable, and 3) the original email used for the whole itune set up has never changed, is still valid and again not proof of who we are. This all leads me to believe that they can fix the problem but that they choose not too.
We can log into the account but can't get past the security questions even with the correct answers.
How can their purchase orders not be linked to the funds (and associated email) they are accessing to pay for the purchase?
Why is it that matching the payment account to the email is not a valid proof of who we are?
None of this makes any sense at all.We are fellow users here on these forums.
Who did you call ? If you don't have a rescue email address on your account then you should be able to get them reset by contacting iTunes Support / Apple in your country : http://support.apple.com/kb/HT5699 -
Disk Utility can't fix problems, and is very sow...
Every time I run Disk Utility on my system's "Macintosh HD", it returns this error list:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
Is this OK? If so, why it does show this? If it's not OK, why it can't fix this problem?
And it takes 4-5 longer to run "Repair Disk Permissions" than it was on OS X Tiger.
I sent this report also to the Apple Mac OS X Feedback. Just wanted to know is this Disk Utility report normal?But this repairing process takes about 4-5 minutes, while on Tiger it took about 1 minute.
That is normal in Mac OS X 10.5.
(26351) -
my ipod nano is not being recognized by windows 7 when I now try to sync. Is the only way to fix this to uninstall and reinstall itunes and do I then have to redownload all my music?
Try a different cable. And are you connecting directly to your computer or through a USB hub?
-
Disk Repair Utility can't fix problem - help needed.
I have an external drive that I have been using with Time Machine. Last night I closed up the MBP and waited for the LED to start pulsing, then I unplugged the drive and packed stuff up. When I got home, I plugged the drive back in and opened the cover on the MBP. The drive icon was not on the desktop, and there were no other error messages.
I ran Disk Utility and did a "Repair Disk", which stopped after a few seconds with the following:
Verify and Repair volume “OneTouch4 M”
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid sibling link
Volume check failed.
Error: Filesystem verify or repair failed.
Is there anything I can do at this point, other than erasing the disk and starting over? I don't THINK there's anything vital in the backups, but still I'd rather not lose them.
WaltYes, that's what I usually do. I was in a hurry, and I thought "If the disk is there when I go to sleep, and is put back before I wake up, I won't know the difference". Obviously not true - I guess the Mac is still doing stuff when it's "asleep".
Thanks for the tip on Disk Warrior - there's nothing on that disk that's worth $99 to me, so I think I'll just erase it and start over. It has only the most recent 2 weeks of TM backups on it, the rest are on my previous TM disk.
Walt -
Windows 7 platform
Office 2010
Have tried Foxfire (recommended by software co) and Explorer
Neither works all of suddenI am experiencing this exact same issue. I have a few things I have noticed as well. If I go to the iView (where you would edit it) and preview it first, it runs fine. It also works if I have it open in another window, instead of the portal frame. Also, as soon as I have previewed the iView first, if I then go and run it, it will work. But otherwise it will not let me log in. I have been using IE to test, however I have found that if I use Mozilla I can then log into most of the applications I was having trouble with.
-
Can someone please help me with this. Loading problems and error codes.
I have several problems with itunes on my PC. I use 2 PC's and Iphone for work and I have an IPod nano. For about a week I have been having several problems with Itunes. The first problem is I cannot access the store, I get the loading screen and that is it. This screen lasts forever, nothing ever happens it just loads, and loads, and loads. . . .
I try to sign in thinking that will help the loading issue and I get error message saying "We could not complete your itunes store request. An unknown error occurred (-50)." This happens on both computers. I also cannot download from my iphone, I get the same error message. Running diagnostics does nothing, itunes says everything is in working order. Uninstalling and reinstalling also does nothing. I have had itunes for years now and up until about 10 days ago had no problems. My itunes is not behind a firewall on either computer. I'm saying all of this because I would prefer not to get obvious answers or links that do not help me. Please someone has to know how to fix this.Welcome to discussions! This is the rather infamous chkdsk error which will require that you restore your iPod. The following link will give you a complete explanation/instructions.
http://docs.info.apple.com/article.html?artnum=300554 -
Runtime.getRuntime().exec(...) problems and exit codes
Hi,
I am trying to launch an application 4 times with different arguments from a Java app. I have tried doing it sequentially and in four different threads, but the results are the same: sometimes the 4 of them are properly launched, sometimes (the most of the times) only 3 are launched and sometimes only 2. I have tried with cmd and cmdarray[] as parameters for exec but the results are the same.
This is one of the four threads I use:
Runnable r1 = new Runnable(){
public void run(){
String ecgCommand = "./flute -S -m:" + Config.ECGS_FLUTE_IP + " -p:" + Config.ECGS_FLUTE_PORT + " -F:" + Config.ECGS + " -r:" + Config.ECGS_FLUTE_RATE + " -C";
System.out.println(ecgCommand);
InputStream ecgsStream = null;
InputStreamReader isr = null;
BufferedReader br = null;
try{
ecgsProcess = Runtime.getRuntime().exec(ecgCommand, null, new File(Config.HOME_PATH + Config.FLUTE_PATH));
String line;
ecgsStream = ecgsProcess.getInputStream();
isr = new InputStreamReader(ecgsStream);
br = new BufferedReader(isr);
StyledDocument styleDoc = mm.ecgFluteMessages.getStyledDocument();
Style def = StyleContext.getDefaultStyleContext().getStyle(StyleContext.DEFAULT_STYLE);
while((line = br.readLine()) != null && running){
if(styleDoc.getLength() > 25000) mm.ecgFluteMessages.setText("");
styleDoc.insertString(styleDoc.getLength(), line+ "\n", def);
mm.ecgFluteMessages.setCaretPosition(mm.ecgFluteMessages.getDocument().getLength());
System.out.println(ecgsProcess.waitFor());
}catch(Exception e){
try {
br.close();
isr.close();
ecgsStream.close();
} catch (Exception e1) {
e.printStackTrace();
new Thread(r1).start();Adding a Thread.sleep between runnables doesn't have any effect.
In addition, those processes that are not properly launched return an exit value of 255. I have searched for its meaning but I have found nothing. Could anybody tell me where can I find a list of the JVM exit codes in order to guess what is happening?
Can anybody help me with this issue? Help is much appreciated.
Thanks a lotI have been looking for it but it seems it has not any exit code list or any documentation regarding this. Anyway, I think 255 is a JVM error code (the last one, errors are numbered in modulo 256) which means that the error has nothing to do with JVM but with the application execution (flute in my case).
I have added a prompt for the errorStream and I have this message for the 255 exited programs:
not well-formed (invalid token) at line 15+
And the four commands are like this:
*./flute -S -m:239.255.255.253 -p:60102 -F:./ecgs -r:150 -C*
*./flute -S -m:239.255.255.252 -p:60103 -F:./ads -r:150 -C*
*./flute -S -m:239.255.255.251 -p:60104 -F:./pushvod -r:50 -C*
*./flute -S -m:239.255.255.250 -p:60105 -F:./banners -r:150 -C*
So, as the process is sometimes initialized properly and others it is not, it seems that there is a problem with the tokenizing of the command not happening always. As I have tried it with a single command line and with an array of command strings (the first for "./flute" and the followings for each argument) with the same results I can't understand why is this problem happening sometimes. Happening always would help me in giving a clue but that's not the case.
Any idea? Thanks a lot.
Edited by: dulceangustia on Apr 3, 2008 3:41 AM -
Rt - unable to deploy model and fpga code
hi all,
we are having trouble getting our code to deploy to a rt target and fpga
We are unable to use the network shared variables to communicate between the FPGA and RT target, details below, does anyone have a suggestion?
system:
Host : windows 7, NI Labview 2014, MIT / Vertistand installed
Target: PC with Labview RT & PCIe 7852R FPGA
we have a standalone working FPGA code working (verified) and we added a "Network Published Shared Variable with RT FIFO enable using Single Element"
our idea is to read an encoder and calculate the counts (this part works) using the FPGA, we then want to send that info to a vi running on RT target and display the value. eventually our RT target will have a model/controller built , but right now we only want to read and display a single value.
When we run, we get the following erros:
based on reading the forum, we tried to reset the MAX database to get the "NI Variable engine" because the windows services shows the ni variable engine is not running.... we tried this and it did not work...
any help will be apprecated,
also here is our project structure...Hi JK,
Are you sure you're trying to use network published shared variables to communicate between the FPGA and the RT target? Could you explain that a bit more or provide code screenshots (or actual code)? Typically, there are two ways to communicate with an FPGA VI: read/write controls, and a DMA FIFO (the thrid, less common way, is User-Defined I/O Variables). These methods are abstracted when using VeriStand because the XML you import (the *.fpgaconfig file) tells VeriStand how to interact with the bitfile via these methods. If you are using the Model Interface toolkit, you are using LabVIEW (not VeriStand), so you will need to get the encoder values from the FPGA via read/write controls or a DMA FIFO. This is accomplished on the RT side by using the FPGA interface functions palette:
FPGA Interface VIs and Functions
http://zone.ni.com/reference/en-XX/help/371599K-01/lvfpgahost/fpga_interface_palette/
Transferring Data between the FPGA and Host (FPGA Module)
http://zone.ni.com/reference/en-XX/help/371599K-01/lvfpgaconcepts/fpga_data_transfer_overview/
The RT code can read and write to network published shared variables, but the FPGA cannot access them.
Kevin W.
Applications Engineer
National Instruments -
Initial setup problems and beginner code questions ...please help?
Hi,
Two days ago i started playing around with Java but it has been one pitfall after another for me. I am a visually impaired user, the fun started when i wanted to install the JDK. I think i got EE 5.0 by mistake, but that doesnt even bother me that much. The installer somehow managed to totally elude the screenreader I was using and I needed sighted help to get the thing installed. I think something went wrong with the environment variables during that process because when I first tried compiling a snippet of code it couldn't find Javac. I had to enter:
c:\sun\sdk\jdk\bin\javac.exe c:\saluton.java
to get anything done. I have been trying to learn java using a three-year old copy of teach yourself Java in 24 hours, which might explain my following questions. Here is the code snippet i got from the first chapter:
class Saluton {
public static void main(string[] arguments) {
// my first Java program goes here
String greeting = "Saluton mondo!";
System.out.println(greeting);
This code didn't compile, complaining about Cannot find symbol.
I took out another book, Learning Java, and i got the following code out of this:
public class HelloJava {
public static void main( String[] args ) {
System.out.println("Hello, Java!");
This code did compile, but when i tried:
c:/sun/sdk/jdk/bin/java.exe HelloJava it said the class couldn't be found. I am assuming this has to do with the .class file not being in the folder where it should be, but again I don't know.
I got the JAB (java access bridge) but I had the feeling the info that came with it is rather outdated ...could someone give me some insight on this as well?
Thanks very much for any help you all can provide,
FlorianHi,
Using your help I've been able to find the error in the saluton mondo program, the caps of the String in the main function declaration was wrong. I have set my Path to the right setting now, and javac and java behave as they should now which is good.
What about my question about the access bridge? How do i use it, exactly? (just telling me where that info can be found is enough really) I'm really confused by all the different .jar files and such ...
Also, once it is installed do i need to somehow ...activate it or reference it in my code to make my apps readable? I would like to see if my program did what I wanted it to do so yeah ...
Thanks for any help,
Florian -
Problem with disabled code view
Hi,
I've a problem with a template-based website which works fine
in design view but will not allow edits in code view (with the
exception of the contents of the <title> element). The
template has multiple editable regions and has been deployed on
quite a few occasions to multiple authors with varying
configurations without any trouble before, but now it is causing
quite a bit of head-scratching!
The problem originally manifested in Dreamweaver MX 2004 on
Windows 2000. An upgrade to Dreamweaver 8 has taken place and the
issue persists. Testing on a similar computer using a standard
shared drive in Windows shows the same problem in Dreamweaver 8 but
was fine in Dreamweaver MX. Working with a copied set of files on a
remote computer (Win2k and DW MX 2004) seems to somehow resolve /
circumvent the problem and the code view works fine. Unfortunately
this isn't an option for the main authors of the site who have only
their current machines available.
The fifth post down in a
thread
over at DMXzone seems to refer to a similar problem, but the
workaround highlighted there has not worked for me.
I'm not really a heavy Dreamweaver user but I can normally
figure things out. This one however has got me stumped - anybody
got any ideas? (Apologies if it's a really simple setting or flag
that I should know about, but I've not been able to find anything!)
Cheers,
DanCa you post a link to the page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yorkdan" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I've a problem with a template-based website which works
fine in design
> view
> but will not allow edits in code view (with the
exception of the contents
> of
> the <title> element). The template has multiple
editable regions and has
> been
> deployed on quite a few occasions to multiple authors
with varying
> configurations without any trouble before, but now it is
causing quite a
> bit of
> head-scratching!
>
> The problem originally manifested in Dreamweaver MX 2004
on Windows 2000.
> An
> upgrade to Dreamweaver 8 has taken place and the issue
persists. Testing
> on a
> similar computer using a standard shared drive in
Windows shows the same
> problem in Dreamweaver 8 but was fine in Dreamweaver MX.
Working with a
> copied
> set of files on a remote computer (Win2k and DW MX 2004)
seems to somehow
> resolve / circumvent the problem and the code view works
fine.
> Unfortunately
> this isn't an option for the main authors of the site
who have only their
> current machines available.
>
> The fifth post down in a
>
http://www.dmxzone.com/forum/topic.asp?topic_id=33748
> seems to refer to a similar problem, but the workaround
highlighted there
> has
> not worked for me.
>
> I'm not really a heavy Dreamweaver user but I can
normally figure things
> out.
> This one however has got me stumped - anybody got any
ideas? (Apologies if
> it's
> a really simple setting or flag that I should know
about, but I've not
> been
> able to find anything!)
>
> Cheers,
> Dan
>
>
> -
Keep trying to down load a Magazine I just purchased an I keep getting an error message that "unable to download folio". Have check for enough space and have deleated app. And reloaded. Also rebooted iPad nothing fixes problem.
Does the iTunes Store need to reset my subscription or is this a fix I can do on my iPadTry This...
Close All Open Apps... Sign Out of yopur Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Maybe you are looking for
-
what are the settings required for upload bps,products,orders from r/3 to crm in middleware,r/3 and crm?
-
Query from the data abse and pass values to a pdf form
query from the data abse and pass values to a pdf form Hello Hello i have this html report that i have written to output a report. now, i am assigned to pass the same fields to a pdf form so the fields in the adaobe form can be populated or the term
-
No aggragation when combining reports
Hello all, I combined 2 reports with each other in answers. The first one is a dim with 2 different fact values from 2 different fact tables and the second one is the dimension with a 2 columns with null values Now I got something like: A -1 - 1 A -
-
Trying to export photos to Picasaweb--HELP!!
I would like to send albums of photos to others. People have suggested I use Picasaweb to do so. I already use gmail, so getting Picasaweb was no problem. Here's my problem (so far): when I try to export an album to Picasaweb (by selecting an album,
-
Can't import artwork on an album
I just got a Mac Mini and am now running iTunes 9.02. On one dual album, I can't import the artwork. I've tried several different ways: dragging to Get Info on highlighted tunes from different sources, Get Artwork, and downloading the album cover to