Startup takes forever, Apple Logo changes, Computer is slow.. help??

First off, I am sorry if this is in the wrong section. If so please forgive me.
Secondly, my macbook pro just started acting up a few days ago. The first day it started acting up it was running slow, and the spinning colorful wheel of death started spinning, and everything froze. So I restarted my laptop... The Startup would not pass the white screen with the apple logo and the spinning grey "circle". And then, all of a sudden, the apple logo turned into a "no" logo... like, a "non-smoking logo" but without the cigarette.
Over the pass several days, it has started up, but it is still slow.
I did repair disk permissions, nothing happened to help speed things up.
I tried resetting my RAM, however, since startup will not pass the white screen.
Now, it will not pass the white screen at ALL. And the logo always changes.
I feel like a brought this on, makes me mad if I did anything to make this happen!
Anyways, can anyone help? I am taking it to a ComputerTree tomorrow, cause the apple store is too far away. So if anyone can help before tomorrow/if anyone knows what the problem is... that would be great!!

First, if you don't already have current backups, make one immediately. Don't overwrite any previous backup. To do this, you have two options: (1) Boot from an external hard drive with a clean installation of Snow Leopard, or (2) if you have a Firewire port, start up in Firewire target mode (hold down the T key at the chime until the Firewire logo appears) and connect your Mac to another Firewire-equipped Mac using a FW cable. The internal drive will mount as if it were in an external enclosure. You can then back it up from the second Mac.
When you've done that, if your Mac came with Snow Leopard preinstalled, boot from the installation DVD that came with it, by inserting the disc, restarting, and holding down the C key until the Apple logo appears. If your Mac came with an older OS, boot from the retail Snow Leopard DVD you used to upgrade.
Once booted from the DVD, select Utilities > Disk Utility from the menu bar. Select the internal drive in the DU window, and click the button labeled "Repair Disk." If any problems are found, repeat until the disk comes up clean.
Finally, quit Disk Utility and run the installer. It won't overwrite your data. When it finishes, reboot as usual, and run Software Update to bring everything up to date. You may have to do this more than once to get all the available updates. If you're still unable to boot normally, try booting in safe mode (shift key down at the chime) to apply the updates.

Similar Messages

On startup Apple logo changes to international No what is up?

On startup the Apple logo changes to a circle with diagonal line, the international NO symbol. What is happening.

Bluelipleader,
since you’d like to get Final Cut Pro Studio 2 onto your MacBook Pro, and you don’t know yet whether that blog method will work in either Mountain Lion or Mavericks, I’d suggest just having them reïnstall Lion on it. (Your problem might be entirely due to software rather than any hardware fault.) You can then take it home, install Final Cut Pro Studio 2 on it, do a selective restore from Time Machine, make a new Time Machine backup of the Lion environment, and then experiment with Mountain Lion or Mavericks at your leisure, since you’ll then have the option of rolling back to a working Lion environment.

IMac (Mid 2007) hangs at startup before the Apple logo comes up

I have a 20" 7,1 iMac (Mid 2007) with Lion installed on it that hangs at startup before the Apple logo even comes up. The machine is on a APC surge protector, but not on a UPS. We had a few power outages yesterday that were caused by high winds. When I came home the machine was stuck at a white screen. When I tried cycling the power it got stuck at the initial white screen. Since then I have tried the following, with no luck:
- booting in safe mode
- booting in verbose mode
- booting into single user mode
- booting into hardware test mode
- booting in recovery mode
- booting from the original DVDs
In all cases it just hangs at the initial white screen. About the only thing that has worked is reseting the PRAM and NVRAM. Which definitly reset the speaker volume and screen brightness, but did not get it to boot any further.
Oh, and I should note that I have unplugged all external devices and switch back to the orginal (usb) keyboard and mouse.
Any thoughts on what the issue might be? I have done a number of searches, but I did not find much info about machines hanging so early in the boot process.
Thanks in advance.

Good work so far, about the only thing left to try is...
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Restart / Reset
http://support.apple.com/kb/ht1430

My iPad is stuck with the apple logo!!! Please help me

My iPad is stuck with the apple logo. it just shut off, and I turned it on, and the apple logo won't go away. sometimes the screen goes black, and then the apple logo shows back up. Help!!!!!!

Have you tried rebooting your iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not work, you can try restoring your iPad iOS Software.
iTunes: Restoring iOS software - Support - Apple
Make sure that you read the article all the way through and pay attention to the last part that talks about using recovery mode.

Startup takes forever...

I just installed Leopard and transferred my data from Tiger. Just as with Tiger, Leopard is taking 2 min to fully start up. I deleted my PRAM and NDRAM and still nothing. Somebody told me to once again do a erase and install this time not doing the transfer, but at this point I have spent forever getting the computer customized and already added in many more applications. Is there anyway that I can find out if I have something attached to my user profile or something that is making it take so long? Right now it is 40 sec of a black screen, 50 sec of the grey screen with the apple logo, then after I enter in my password for my username another 30 seconds. Please help.

Sudden Stealth wrote:
I opened up terminal and typed dmesg, but nothing happened. What is the correct command exactly?
Hmmm, it seems that one now needs admin privs to run dmesg, I think I ran it before as a normal user.
You need to run the following command:
sudo dmesg
(you will be prompted for your admin password and then it will run.)
You will see a long list of startup commands.
It will start like this:
:start []
CSRHIDTransitionDriver::switchToHCIMode legacy
Jettisoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count = 1
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
Matching service count = 2
NVDANV50HAL loaded and registered.
Previous Shutdown Cause: 5
GFX0: family specific matching fails
ath_attach: devid 0x24
Also try the Option-V on boot which should give you essentially the same info.
Also, if it was a hardware issue, what would you think it may be and how would I find out? I am not thinking its the hard drive because it has a delayed response on both the tiger hard drive and leopard hard drive. Could it be the optical drive? It has been making a few sounds randomly every once and awhile.
Not the optical drive unless you are using it. Those few sounds you hear probably indicate a bad HD.
Run DU and repair the drive.
Thanks so far for your help...
Anytime - that's what these boards are for.

IMac g5 is stuck at white startup screen with apple logo & spinning circle

Hello,
i had a digital copy of os x leopard and i was trying to reinstall it, so i would double click on install mac os x, and it would tell me to restart, i would do this but nothing happened so i had to mount the disk again and double click install mac os x, and it told me to restart again. so i looked up how to install leopard from a dmg file, and it said to restore the dmg to the drive, so i went into disk utility and i put the source as the dmg, and the destination i dragged the imac hdd icon. it finished and i was gonna select the leopard file as my startup disk in system preferences, but that wouldnt run. i then noticed some of the letters were missing on the name of the icons in the dock, so i just restarted the computer, but it got stuck on the white screen. i tried lots of stuff like turning on while holding shift, but it didnt do anything, and i tried with cmd+s and that gave me some black command prompt where i typed/sbin/fsck -fy and that did some stuff and it said my drive was okay, but it still wont start up. What do i do?!?!

im trying tiger right now, first i wanna reinstall tiger, than leopard next, you know, one problem at a time. i dunno maybe, heres the readme:
Read Before You Install
Mac OS X
Read this document before you install Mac OS X. It includes information about
supported computers, system requirements, and installing Mac OS X.
For more information about Mac OS X, visit this website:
• www.apple.com/macosx/
For the latest information about using Mac OS X, connect to the Internet and open Mac
Help. To open Mac Help, click the Help menu in the Finder and choose Mac Help.
For information about the support available for this product, see the AppleCare
Software Services and Support Guide included with Mac OS X.
System requirements
You must have a Macintosh computer with:
• a PowerPC G3, G4, or G5 processor
• a DVD drive
• built-in FireWire
• at least 256 MB of RAM
• a built-in display or a display connected to an Apple-supplied video card supported
by your computer
• at least 3 GB of disk space available, or 4 GB if you install the developer tools
If you see a message in the Installer that you do not have enough disk space to install
Mac OS X, you can deselect items to save space. To deselect items, click Custom Install
in the Easy Install panel.
Updating your computer’s firmware
You may need to update your computer’s firmware. It’s best to update the firmware
before installing Mac OS X. If you haven’t started the Mac OS X Installer, check the
Apple Software Updates website to see if there are any firmware updates for your
computer:
• www.apple.com/support/downloads/
If you don’t do this, you may see a message that you need to update your computer’s
firmware when you start the Installer. To update the firmware, you will need to quit the
Installer and restart your computer using your current startup disk, then check the
Software Updates website.
If you have problems with your computer after installing this version of Mac OS X, you
might need to update the firmware even though you did not see a message when you
installed the software. Check the Software Updates website for recent firmware updates
for your computer.
Starting installation
To start installing Mac OS X, insert the Mac OS X Install DVD and double-click the
Install Mac OS X icon:
You can also start installing Mac OS X by inserting the Install DVD and restarting your
computer while holding down the C key, or by selecting the Install DVD as your startup
disk using Startup Disk preferences.
Quitting the Installer
If you need to quit the Installer before you click Install in the Easy Install or Custom
Install pane, choose Quit Installer from the Installer application menu, then click
Startup Disk to select a startup disk for your computer.
If you have already clicked Install, wait until installation finishes.
Advice about hardware compatibility
Installing on a Power Macintosh G3 (Blue and White)
If you have a Power Macintosh G3 (Blue and White) that came with an Apple SCSI hard
disk, do not choose UNIX File System (UFS) as the format for the destination disk.
Installing on a computer with a third-party SCSI card
If you have a third-party SCSI card installed in your computer and you cannot start up
Mac OS X, attach a disk drive or terminator to one of the card’s ports. If you continue
to have problems, try removing the card. Contact the manufacturer of the card for
more information about using the card with Mac OS X.
Installing on a computer with a third-party video card
If you have a third-party video card installed in your computer, you may need to
remove it before you install Mac OS X. Contact the manufacturer of the card for more
information about using the card with Mac OS X.
Advice about installing Mac OS X
Erasing and formatting your disk
When you install Mac OS X, you can erase the destination disk you select. In the “Select
a Destination” pane of the Installer, click the Options button. Select Erase and Install
then choose a format. In most cases, choose Mac OS Extended (Journaled).
Important Do not choose UNIX File System (UFS) unless you need to work with this
format. If you choose UFS, Mac OS 9 and all Mac OS 9 applications must be installed on
a Mac OS Extended format disk to use them with the Classic environment.
To install Mac OS X on the same disk or disk partition as Mac OS 9, the disk must be in
Mac OS Extended format. If it isn’t, quit the Installer and back up your files, then
reformat the disk.
You can also partition your hard disk into several volumes before you install Mac OS X.
In the Installer, choose Utilities > Open Disk Utility and click Partition. Partitioning the
disk erases the entire disk, so be sure to back up your files first.
Installing optional software
Easy Install installs all the software you need to use Mac OS X, but does not install
some additional software. If you want to install this optional software or you don’t
want to install all the software installed using Easy Install, click Custom Install and
select the items you want to install. If you want to install this optional software later,
insert the Mac OS X Install DVD and double-click Optional Installs.
Locating the Installer log
When you install Mac OS X, the Installer saves a log of the installation. To see the log,
open Console (in /Applications/Utilities), click Logs, then click the triangle next to /
var/log and select install.log.
Reinstalling Mac OS X
To reinstall Mac OS X, insert the Mac OS X Install DVD and double-click the Install
Mac OS X icon, then follow the onscreen instructions. When you see the “Select a
Destination” pane, click Options to select how to install Mac OS X:
• Select “Archive and Install” to save your existing system files, user accounts and
their home folders, and existing network settings. The Installer saves files in a
folder named Previous System so that you can copy them to an appropriate location
later. You cannot start up your computer using the Previous System folder.
• Select “Erase and Install” to erase the destination volume and install a new copy of
Mac OS X. If you select this option, you will lose all your files and the software you
have installed on the destination volume, so you may want to back it up first. If you
select this option, you can choose the format for the volume. In most cases, choose
Mac OS Extended (Journaled) from the pop-up menu.
Setting up and connecting to the Internet
If you have an existing Internet service provider (ISP) and you’re installing Mac OS X for
the first time, you need to enter your Internet connection information when installation
finishes. Be sure to have the information available. If you have problems connecting to
the Internet, contact your ISP to make sure you have the correct information.
Advice about using Mac OS X
If you have problems starting up
If you cannot start up your computer, insert the Mac OS X Install DVD and restart your
computer while holding down the C key. Choose, Choose > Open Disk Utility, then
click First Aid to repair your disk.
If you have problems starting up your computer and you have devices connected to
your computer such as FireWire drives, USB printers, or external displays, try
disconnecting them before starting up again.
Upgrading your applications and other software
For best results with Mac OS X, look for versions of your applications that are built for
Mac OS X. Check the Mac OS X website for information about available applications:
• www.apple.com/macosx/
If you cannot find Mac OS X versions, upgrade to the latest Mac OS 9 version to use
with the Mac OS X Classic environment. Check with the manufacturers for the latest
updates.
Using POP email accounts and On My Mac mailboxes in Tiger and Panther
If you have a shared home folder and you access a POP email account using Mail in
both Mac OS X Panther and Mac OS X Tiger, you will not see messages that you retrieve
in one version when you switch to the other.
As an alternative, you can deselect the option to remove copies from the server after
retrieving your messages. To change this option, open the Accounts pane of Mail
preferences and click Advanced.
You will not see messages saved in a mailbox on your computer when you switch from
one version to another. To avoid this problem, use separate home folders for each
version of Mac OS X.
Your IMAP account will synchronize automatically when you switch between Mail in
Tiger and Panther.
© 2005 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, FireWire, Macintosh, Mac OS, and
Power Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
PowerPC is a trademark of International Business Corporation, used under license therefrom.
it says that a imac g5 can work

Macbook Pro (A1278) - Unable to startup - stucks at Apple logo with spinning wheel.

My friend gave me his macbook pro today having startup issue. It stucks on apple logo at startup with a spinning wheel.
I have tried to repair disk but does not work.
tried to reinstall OS but it says This Apple ID is not the one which you used to purchase this OS version (something like that)
I upgraded from mac os x lion to mountain lion.
I do not have any installation media as well.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

MacBook Pro won't get off startup screen with apple logo. Help?

Could someone please tell me how I can get my macbook to get off that stupid startup screen with the apple logo? It won't go past that screen and boot properly. I have tried reinstalling OS X didn't work. I tried running a disk utility test and no errors where found. I don't have the time machine thingy so I couldn't try that. Is there anything else I can do before taking it to Apple and l
paying hundreds of dollars???
thanks in advance!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Why did my apple logo change to gold?

Has anyone had their apple icon mysteriously change to golden? I took a screen shot. I am referring to the apple logo in the top left corner of the screen. I swear it just changed all by itself.

So I decided to reboot my computer just to see... Now it is back to its usual black color.
THIS IS ODD.
Anyone know why that happened? It didn't really bother me. Just kinda weird...

Apple logo changing colors loop

Hello-
I have a iPhone 5c. I bought my phone October 27 of this year. I have had issues with it since the 4th day of owning it and no one can help. So I'm turning to you guys, hoping you have something! My phone will get in a constant loop, and I've done all the loop tricks and they work....for about a day or two. Took it to apple they "fixed it".... for 3 weeks it worked and now its doing the apple logo loop, but now the screen changes colors. Sometimes it is the screen, some times it is the apple logo, and then there are times when lines show up. This is driving me craz! Someone please help!

The 30 day return warranty ran out the 27th of November.

Startup display flashes Apple logo, circle w/ line ,question mark folder

I attempted to install OS 10.6 SL and during initial install and restart my MBP display started flashing the grey Apple logo, circle with angle line thru it, and file folder icon with question mark in center. I can not get my MBP to restart. It just keeps flashing the symbols. as described.

After trying to get the system to start either with the install disc DVD or from the HD, without any success, I tried something a little desperate. I replaced the HD with the one that was installed originally. Of course, this HD was reformatted without any system. It, again, tried to start from the install disc DVD, as directed, but with no solution. After a gray logo screen for a couple of minutes it stopped the startup process, but did not shut down, I was still left with a black screen and nothing happening, until I hit a key and the whole thing repeated itself. I have since gone back and reinstalled the larger HD with OX 10.5 installed on it, but with no success. Obviously, it doesn't seem to be anything on the HD. If this was a PC I would think that I needed to reset the BIOS, but I am not that familiar with the ROM. Any further suggestions?

Stuck on gray startup screen, no apple logo - help?!

My Powerbook chimes when I turn it on, then goes to the gray screen, but sits there, does not move forward, no apple logo, no spinning circle, no beachball, nothing. I can hold the power button to turn it off, again to turn it back on, etc., but nothing else. I tried starting in safe mode, same exact result. Tried starting from the leopard install dvd, still nothing. The DVD drive makes the noises as if it's reading the disc, but the computer does not get past the gray screen, and now I can't even get the disc out. Any recommendations??

Jason: Your present situation is not clear from your posts. Do you still have an installer DVD stuck in your optical drive? When you power up the machine while holding down the "c" key with the installer DVD in the drive, does the machine start up? If not, exactly what does happen?
Presumably there is an OS installed on your hard drive, because if there weren't, you would never have been able to get onto Hotmail. Does the Powerbook start up from its hard drive when no installer disc is in the optical drive? If not, exactly what does happen?

IPOD Touch only shows apple logo and computer will not recognize IPOD in iTunes or on my Mac. Cannot restore.

My IPOD Touch 3G is frozen on the apple logo. It will allow me to reset it. The computer no longer will recognize it. I have tried on several Macs and it seems as though the problem is with the IPOD and not the computer since none of my MACs will recognize it.

You can try to put it on Recovery mode then restore it..
Press or Hold the power and home keys 10 seconds.
Screen goes black, now release the power button
Make sure you do not release the Home key until
your iTunes says "We have detected an itouch
in recovery mode."
After this its simple all you
got to do is a simple restore using your iTunes

Problem with MBP won't startup just showin "apple logo"

Hello,
today I have turned off my MBP Retina 15" by pressing the power off while I pressed the update and it won't restart becuse the big applications I have played so I trun it off by Pressing the" power bottun "
Now It's show only Grey Screen and apple logo only
I can't see the log in screen
======
I am Using " recovery mode " by Pressing command + R and Donw arrow .
I have tride to fix it by using
Verify and Repair volume "Machintosh HD"
but not work
Help me

Try some troubleshooting before you start trying to move a bunch of stuff around.
Startup Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

Startup takes forever, Apple Logo changes, Computer is slow.. help??

Similar Messages

Maybe you are looking for