State not changed when clicking on bound JCheckBox (10g, JClient)

I have a JClient Panel with a JCheckbox bound to an attribute, and Selected / Unselected State Value set in the Boolean Binding Editor.
The checkbox correctly reflects the values in the DB when navigating through the rows. But neither the state of the checkbox nor the attribute values are changed when clicking the checkbox. What am I missing ?

Hello Pascal,
Many thanks for your "dead checkbox" solution!!! I ran into exactly the same error. (Oracle have not acknowledged this as a bug in spite of your May message?!)
Regards Sten
PS My conversion to ADF of my JClient medicare application has been really awful. So much is undocumented - both the correct coding technique and the bugs. Hope you are doing better!

Similar Messages

  • Blend Visual States not changing when selecting them at design time

    I've been having an issue with Blend for quite some time now and can find no info on this.
    Problem: After adding states to a user control and configuring each state, when you click on any of the states, the designer does not show the state (once in a while this does work).  As a work around, I have to first click the state I want to see,
    then change a property like margin (then put it back) and the state will show, sometimes only for a second, and once in while it will stay until I click the next state.
    Any help would be appreciated. Thanks!

    Jhon, what Frank mentioned can't be fixed from the outside. You or the developers who use phase listens without thinking about the design view are the ones to fix this. Frank provided you with the solution for this.
    However, we don't know if you use any self written phase listener. If you don't do this you have another problem. I do see some of your symptoms but can't reproduce them at the moment. As long as we can't reproduce the problem somehow it's difficult to to get a solution.
    My advise is to keep your eyes open (add I do) and whenever you can reproduce this behaviour come back and tell us about it. It's hard or impossible to give the 'best' settings for Jdev.conf as they depend on other factors e.g. operating system, memory, other applications running at the same time and many more.
    Personally I don't change the parameters as long as I can't put the problems to low memory (which I can't at the moment).
    Timo

  • How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    zedzed,
    Here's another thought.
    Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
    To duplicate the file, click once to highlight it. Press the Command + D keys.
    Drag the History,plist copy file to the Desktop.
    Highlight it. Press the Command + I keys, to get info.
    Change Open With to TextEdit.
    When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
    ali b

  • My edited photos will not display when clicked on, a large triangle with exclmation comes up

    my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign. 

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • Visited link color is not changing when there is no page redirection

    Visited link color is not changing when i just open a popup on clicking the hyperlink.. whereas visited link color gets changed when i redirect to a new page on clicking the hyperlink
    I want to have my visited link color to change even if i show a popup on clicking the hyperlink
    This works fine with IE..

    Hi,
    Have a look at the user status table TSOCM_STAT_PROP and see if there are any unwanted PROCESS_TYPE <> STSMA combinations.
    For your process type there should only be one kind of status schema assigned.

  • Outcome changed when clicking on PDF attachments

    Outcome changed when clicking on PDF attachments.
    This is recent, possibly after updates I am using Adobe Reader 10.0.10, Firefox 35.0.1 on a machine running Windows 7
    I no longer get the open/save dialogue box when I click on a pdf attachment, how do I get this back please?
    I am having other problems but they may be related to the above so I would like to sort that first if possible.

    No,, sorry for the lack of clarity, pdf attachments to emails and other pdfs on the web. I am not sure whether it is a reader problem or a browser problem.
    For example, I click on a PDF attachment to an email and the computer immediately attempts to save it to a file, usually opening the last folder I saved a PDF to, no dialogue box to ask me whether I want to open it or save it to a file. Likewise I went to a web site to print an invoice, clicked on the print invoice button and the computer attempted to save the file to the last folder.

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Firefox stops responding and some times dose not start when clicked on alot!

    fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
    I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.

    Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
    Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!!

  • View only works in one direction,will not change when I turn the phone

    view only works in one direction,will not change when I turn the phone

    Is the rotate lock on?
    http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

  • Finder not working, when click the infinity sigh comes, can't open any file

    finder not working, when click the infinity sigh comes, can't open any file?

    That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

  • Colors in parade do not change when I move the Temperature slider.

    I am trying to do the speed grade tutorial, but the color does not change when I move the temperature slider.

    It might be nice to know which "issue" of Sg you're using.There have been issues where the colors "lag" while using a slider/control, but typically when you let "up" on the control, the adjustment is "there". From your comment, am I correct in assuming that the controls simply don't do anything even after you've moved them? And of course ... when you "move" them, you do see the indicator on the slider-line move, right?
    Neil

  • The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
    Not all apps support orientation changes, BTW.

  • Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

    ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

  • Book icon not opening when clicked

    I have an odd problem here.
    In my Contents tab on the left side, I have eight Book icons
    that, when clicked, open to reveal the Help topics inside them-
    just like any normal RoboHelp project would work. However, the very
    last Book icon in the list does not open when clicked. I checked
    the original file and all of the help topics are under the Book
    like they should be. When I compile the file and do a View Primary
    Layout, this last Book icon opens correctly. The problem only
    occurs once the project is built into the software I'm doing the
    Help for. When I move the Book icon up in the list (so it's not the
    last one anymore) it works correctly. But then the Book icon that
    becomes the last icon doesn't open when clicked. So whichever Book
    icon is last in the list doesn't open when clicked. Anyone have any
    clue what would cause this? Thanks alot.

    Hi Scott45 and welcome to the RH community.
    Have you tried deleting the book and adding it again? Also
    you can open the project's .HHC file in Notepad (or something
    similar) and check that the relevant TOC entry is displayed
    correctly there.

Maybe you are looking for