State View powershell cmdlets

I am trying to use powershell cmdlets to pull up the health state of certain groups like "agent" and "Health Service" from a specific custom created state view in Operations manager. Is this possible? If so what is the syntax?
Thanks!

Hi
You can pull information from sate view but you can query group using below code
import-module operationsmanager
New-SCOMManagementGroupConnection
$gp=Get-SCOMGroup -DisplayName "operations Manager Agents"
Get-SCOMMonitoringObject -Group $gp |select HealthState,Displayname
Regards
sridhar v

Similar Messages

Installing TFS PowerShell Cmdlets

I cannot get the TFS PowerShell Cmdlets installed. During the install, I am not prompted to install them. And, in fact, the Typical Install text states it will not install them. After installing, then going in to modify, I do not see PowerShell Cmdlets in the
list of features.
I am on TFS 2013 Update 4 and PowerShell 4.0. How do I install these Cmdlets on the TFS server?

Hi Dgjohnson,
Thanks for your reply.
Please download TFS 2013 Power Tools from here:https://visualstudiogallery.msdn.microsoft.com/f017b10c-02b4-4d6d-9845-58a06545627f.
And share the custom installation features list screenshot here.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Powershell cmdlets to access Azure Storage Analytics

Hi,
Are there PowerShell cmdlets to access Azure Storage Analytics data (Capacity Metrics)?
-Vatsalya
Vatsalya - MSFT The views and opinions expressed herein are those of the author and do not necessarily reflect the views of Microsoft.

Hi Vatsalya,
You could refer to this code sample about blob analytics metrics (https://gist.github.com/RichardSlater/4753866/raw/91a2bf45fb24dff4f770a1384c3e6578ecbd20d5/Get-CapacityMetrics.ps1
) about "StorageAnalyticsMetrics". In this sample, you didn't need to specify the container name.
Please try it.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to send digitally sign S/MIME messages with Powershell cmdlet Send-MailMessage?

Hello,
using AD Windows PKI I assigned a certificate EKU (1.3.6.1.5.5.7.3.4) to sign emails and get this with
autoenrollment also to my CERT Store PS
CERT:\CurrentUser\UserDS\ or the certificate could found via MMC / certificates in the store structur under "Active Directory User Object".
Signed messages (red icon) to send as S/MIME message using Outlook 2010 is not a problem.
Using PowerShell cmdlet Send-MailMessage to be sent company notification for a new passwordpolicy some days before pwd expired?! I use the cmdlet already successfully to filling HTML bodies with variables and send to individuals accounts.
Reduced simplified PS code:
$SMTPBodyHtmlTemplate = Get-Content "C:\PS\Template\HTMLBody.html" | Out-String
Function SendEmailNotification # /* SEND E-MAIL Notification to User */#
[string] $SMTPServer = "mail.domain.local"
$CurrentUser = "$env:username"
[string]$SMTPFrom = (Get-ADUser $CurrentUser -properties mail).mail
[string[]] $SMTPTo = $($Obj.EmailAddress)
[string]$SMTPSubject = "Notification!"
[String]$SMTPBodyHtml = $SMTPBodyHtmlTemplate.Replace("UserDisplayname","$($UserDisplayname)")
Send-MailMessage -From $SMTPFrom -To $SMTPTo -Subject $SMTPSubject -BodyAsHtml $SMTPBodyHtml -dno OnFailure -SmtpServer $SMTPServer -encoding ([System.Text.Encoding]::UTF8) -ErrorAction Continue
How can I use the PSDrive own CERT and using PowerShell cmdlet Send-MailMessage
to send a signed message, without development experience?
Thanks in advance for cooperation.
Manfred Schüler

Hi,
could create with an other colleague a DLL file (with this informations) for successfully sending sign messages from PS-Script.
Function SendEmailNotification # /* SEND SIGN E-MAIL */#
$SMTPBodyHtmlTemplate = Get-Content "C:\PS\Template\HTML.html" | Out-String
[System.Reflection.Assembly]::LoadFile("C:\PS\Assembly\Cpi.Net.SecureMail.dll") | Out-Null
[string]$strSmtpServer = "smtp.domain.local"
[string]$strSmtpPort = "25"
[string]$strFrom = (Get-ADUser $CurrentUser -properties mail).mail
[string]$strFromAlias = (Get-ADUser $CurrentUser -properties DisplayName).DisplayName
[string]$strTo = $UserEmailAddress
[string]$strToAlias = $UserEmailDisplayName
[String]$strSubject = "Subject as you like"
[string]$strBody = $SMTPBodyHtmlTemplate.Replace("UserDisplayname","$($UserDisplayname)")
$objMail = New-Object Cpi.Net.SecureMail.SecureMailMessage
$objFrom = New-Object Cpi.Net.SecureMail.SecureMailAddress($strFrom,$strFromAlias,$objCert,$objCert)
$objTo = New-Object Cpi.Net.SecureMail.SecureMailAddress($strTo,$strToAlias)
$objMail.From = $objFrom
$objMail.to.Add($objTo)
$objMail.Subject = $strSubject
$objMail.Body = $strBody
$objMail.IsBodyHtml = $TRUE
$objMail.IsSigned = $TRUE
$objMail.IsEncrypted = $FALSE
$objSMTPClient = New-Object System.Net.Mail.SmtpClient($strSmtpServer,$strSmtpPort)
$objSMTPClient.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials
$objSMTPClient.send($objMail)
Maybe Microsoft can implement this in future versions of the cmdlets Send-MailMessage ;-)
Manfred Schüler

It is there an alternative to the Test-SystemHealth powershell cmdlet for Exchange 2013?

Hello
The Powershell cmdlet Test-SystemHealth, that was available on Exchange 2010, is no longer available on Exchange 2013.
Test-SystemHealth cmdlet gathered data about the Microsoft Exchange system and analyzed the data according to best practices.
Are there any alternatives to this for Exchange 2013?
Thanks!

Haven't really played with it too much, but check out Get-ServerHealth
http://technet.microsoft.com/en-us/library/jj218703(v=exchg.150).aspx
Looks to have replaced Test-SystemHealth.

Problem with IPAM Invoke-IpamGpoProvisioning PowerShell Cmdlet

Hi Guys,
I have an issue with IPAM configuration installed on a Windows Server 2012 R2 and I have DC, DNS and DHCP installed on Windows Server 2012 R2 on another server, when i run the PowerShell Cmdlet to provision the IPAM GPOs using the following Cmdlet (c:\Invoke-IpamGpoProvisioning
-Domain mydomain.local GpoPrefixName KHA -IpamServerFqdn IPAM.mydomain.local -DelegatedGpoUser administrator) i get this error.
Invoke-IpamGpoProvisioning : Failed to create universal group IPAMUG. Exception calling "CommitChanges" with "0"
argument(s): "The server is unwilling to process the request.
At line:1 char:1
+ Invoke-IpamGpoProvisioning -Domain mydomain.local -GpoPrefixName KHA -IpamServerFqdn ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Invoke-IpamGpoProvisioning], Exception
+ FullyQualifiedErrorId : InvalidOperation,Invoke-IpamGpoProvisioning
How to solve this issue to find the GPOs created on the DC ?

Hi ,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Grayed out in State View SCOM 2012 R2

I want to display only the following items in a state view:
Critical
Warning
Unmonitored
Grayed out Computers/Servers
How do I do this?

Works perfect....
http://www.youtube.com/watch?v=4n9TiXoCCHU

Looking To Delete|Hide The "Monitoring\UNIX/Linux Computers" State View

Seeing as we do not manage any UNIX/Linux boxes in our environment, I’d like to be able to remove the
UNIX/Linux Computers state view from the console.
I was able to track the view down to Microsoft.Unix.Servers.State.View, hosted by the
Microsoft.Unix.Views MP, which is unfortunately sealed.
This of course is preventing me from simply deleting the view directly from the console.
Also, it would appear that the Show or Hide Views… option should instead be labeled
Show or Hide Folders..., as it only allows for showing/hiding folders!!!
Can anyone suggest an alternative?
Thanks,
Larry

Hi,
If you don't have any Unix/Linux boxes you could delete the Unix/Linux management pack. After deleting, you will not have Unix/Linux Computers state view
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to supply an end point to powershell cmdlet Rename-Blob

[cross posted from http://stackoverflow.com/questions/21352295/azure-storage-cmdlet-rename-blob-wants-an-endpoint]
I'm attempting to rename a blog to all lower case:
Rename-Blob -BlobUrl "https://ttseast.blob.core.windows.net/images/Add.png" -NewName "https://ttseast.blob.core.windows.net/images/add.png"
I've verified the blog URI by plugging it into a browser - however, attempting to execute the command tosses:
Rename-Blob : Blob URI does not correspond to storage account end point. A Blob URI must contain blob storage end point.
The arguments for Rename-Blob don't reference anything 'endpoint' - I've loaded the subscription so I should be authenticated and not forced to include AccountName/Key.
How to I determine (or set) the required end point?
thx

If I'm not mistaken, I believe you're using Cerebrata Azure Management Cmdlets as Windows Azure PowerShell Cmdlets do not have a Rename-Blob Cmdlet (Cerebrata has it).
To use Rename-Blob cmdlet, please try the following:
Rename-Blob -BlobUrl "https://ttseast.blob.core.windows.net/images/Add.png" -NewName "https://ttseast.blob.core.windows.net/images/add.png" -AccountName "ttseast" -AccountKey "<your accountkey>"
Thanks to Jaydonli for the alternate approach - turns out that while I thought I was using the native MS cmlets, in fact, I was using 3rd party CLI from Redgate. As per Gaurav Mantri at http://stackoverflow.com/questions/21352295/azure-storage-cmdlet-rename-blob-wants-an-endpoint

RDS PowerShell CMDLETS Issues

I am working on some deployment scripts that will automatically add a Session Host to a new or existing collection at deployment. I am experiencing some inconsistency when it comes to the PowerShell CMDLETS for RDS.
For instance: The CMDLET Get-RDSessionCollection works on some servers and not on other servers...using the same command syntax.
The command I am trying to use as an example is: Get-RDSessionCollection -CollectionName "CollectionName" -ConnectionBroker "HA FQDN DNS name" I can never
get any of the RDS CMDLETS to work when I use the HA FQDN name of the connection brokers. If I use the server FQDN of the active connection broker...it works most of the time (have notice it not working on a few servers).
When trying to troubleshoot why the HA name doesn't work, when doing a packet capture...I don't even see DNS queries go out to try resolve the HA FQDN name I put in...I see DNS queries go
out for the server FQDN though.
Has anyone else experienced any issues with the CMDLETS? I am running Powershell as Administrator as well.

Hi,
You can check the below article might useful in your case.
Extending Remote Desktop Services using PowerShell
http://blogs.technet.com/b/ptsblog/archive/2011/12/09/extending-remote-desktop-services-using-powershell.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Do OM powershell cmdlets exist on MS??

Do OM powershell cmdlet can execute on Management Server.
I want to run some Cmdlets on agent managed computer.
I have a rule which get the list of discoveries for my management pack and based on their enable value (true/false), some tasks are processed.
Now if i install the management pack on agent managed computer, the rule is failing. Is there a way through which we can run OM powershell cmdlets on a agent managed computer.
Thanks,
Mukul

Hi,
Hope the below article be helpful for you:
SCOM 2012 – Install SCOM PowerShell Modules Without SCOM Console Installation
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
After we successfully installing the module on agent, use get-module
command to get all available module, and use get-command -module "modulename" to get all commands that can be used in the specific module.
Regards,
Yan Li
Regards, Yan Li

TitleWindow and State View

I have an application with a titleWindow. On the titleWindow,
I have a "Yes" and a "No" button. If the user click "Yes" then the
button will take them to the next state view. If no, then the
titleWindow is canceled or closed and take the user back to the
application. I don't know how to pass that "event" in the
titleWindow to take the user to another state view. I hope this
make sense to somebody.
Thank you so much!

This forum is for Flex Builder questions. This question is
about Flex itself and should go in the General Discussion forum.
Post there and I will try to help.
But for now, see:
http://www.cflex.net/showfiledetails.cfm?ChannelID=1&Object=File&objectID=558
Tracy

Exporting a State View - SCOM 2012R2

Is there a way to export the members of a State View to a csv file?
I have created a State View of servers and have just the columns needed to view the servers, but can the contents of this view be exported?
Thx,
John Bradshaw

Hi,
Copy SCOM View Data to Excel
http://ianblythmanagement.wordpress.com/2013/05/13/copy-scom-view-data-to-excel/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do i connect to SCVMM powershell cmdlet ??

Hi all,
I am trying to connect to scvmm powershell smdlet from SCVMM console but what i am getting is this:-
Get-SCVMMServer : You cannot access VMM management server localhost. (Error ID: 1604)
Contact the Virtual Machine Manager administrator to verify that your account is a member of a valid user role and
then try the operation again.
At line:1 char:409
+ ... $vmmserver_VAR=Get-SCVMMServer localhost -UserRoleName 'Administrator';
+                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ReadError: (:) [Get-SCVMMServer], CarmineException
    + FullyQualifiedErrorId : 1604,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.ConnectServerCmdlet
Please help.
Thanks,
Pranay.

As was mentioned, SCVMM has its own security separate from Windows.
To use the PowerShell cmdlet you must be an SCVMM Administrator. No lower SCVMM user security level can use PowerShell.
With the information provided that is the only guess.
Since you are attempting to access localhost, I assume that you are launching the console on the SCVMM Server itself? Which means it is running in your logged on user security context.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

FSRM Powershell Cmdlets not working in Azure on Server 2012

I am attempting to use the FSRM Powershell cmdlets on a 2012 server to configure auto quotas. However I guess I am doing something wrong.
Even though there are built-in templates and I have added the one I want manually and have created an auto quota from it, they do not appear to the cmdlets and the cmdlets keep throwing CimException when I try to use them to create templates and auto quotas.
For example get-fsrmquotatemplate returns nothing and new-fsrmquotatemplate -name mydemo -size 10MB resulst in
new-fsrmquotatemplate : Not found
At line:1 char:6
+ $res=new-fsrmquotatemplate mydemo -size 10MB
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (MSFT_FSRMQuotaTemplate:Root/Microsoft/...RMQuotaTemplate) [New-fsrmQuot
aTemplate], CimException
+ FullyQualifiedErrorId : HRESULT 0x80041002,New-FsrmQuotaTemplate
Is there something I am supposed to do first to set the system up?

Hi,
From the result it seems that the FSRM templates cannot be found. So please check if both FSRM and Windows PowerShell 3.0 are installed in Features.
Specifically you can test to remove and reinstall FSRM to see if issue will be fixed.
If you have any feedback on our support, please send to [email protected]

State View powershell cmdlets

Similar Messages

Maybe you are looking for