Statecharts built with debug disabled can no longer be edited?

Hi. I am using the Statechart module with LabVIEW 2009. If I set the statechart code generation settings to disable debugging and then rebuild the statechart, I can no longer place functions or edit the wiring of Transition, Entry or Exit Actions. The configure statechart area behaves as if I were trying to edit the block diagram of a running VI; for example, if I click on a wire, the system creates a probe. If I turn debug back on and rebuild the statechart, I can edit the states again. For destkotp VIs, this is no big deal because I always have debugging enabled. For VIs that I want to run on the ARM Microcontroller target, this is a pain because once a statechart is added to the project, I have to make the target LabVIEW Mobile/Touch Panel/Embedded; that execution target automatically disables debugging and you can't turn it back on again. I have to edit the statechart outside of the project and save it back.
Is there some other setting in LabVIEW or in the Statechart module that I am not getting correct?

Hi pkovitz,
You are right that this is a completely separate (and unrelated) issue, so a separate post is good.
This is a bug that was introduced in the LV 2009 Statechart Module. The workaround is exactly as you described. You are right that this is cumbersome to do when using statechart on embedded because you must generate code outside of the project.
I think you can minimize the amount of editing you must do outside of the project by doing the following when you encounter the problem:
Close your project and save whatever you need to save.
Open the statechart outside of project. Change target to desktop and enable debugging.
Generate code for statechart. Now change target to windows mobile/touchpanel/embedded and save your statechart. Close your statechart
Reopen your project. You should now be able to edit your guard/action VIs until the next time you generate code.
I realize this isn't the best solution/workaround, and I apologize for the issue and inconvenience. If you find this impedes your workflow too much, let us know and we can see if there are perhaps some better workarounds. We realize this can be a big inconvenience for our users so I assure you the bug is getting appropriate attention.
Thanks,
Nick

Similar Messages

Photo gallery built with adobe edge can not be seen on mobile devices.

photo gallery built with adobe edge can not be seen on mobile devices.
ps: I do not have any email attachment, I do not understand a thing of referring

Hi, Stefano-
This post might help you figure out how to post your files for us to review:
http://forums.adobe.com/message/5935946#5935946
It's very helpful for us to be able to look at your files to help you with your specific problem.
Thanks,
-Elaine

HT5622 When Playing candy crush or dice with friends, I can no longer connect to the apps store

When Playing candy crush or dice with friends, I can no longer connect to the apps store to purchase items like lives, dice etc. This seems to be since the upgrad to IOS7. Thoughts?

Hello there, gracieflad.
The following Knowledge Base article offers some practical and detailed steps to help resolve issues with not being able to connect to the iTunes Store with iTunes on your Windows computer:
Can't connect to the iTunes Store - Apple Support
Thanks for reachign out to Apple Support Communities.
Cheers,
Pedro.

After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

Go here: http://www.apple.com/feedback/iphone.html and report it with as much detail as possible.

TS3276 I can send emails with Mail but can no longer receive them. Yet I haven't altered anything. How do I solve this problem. Thanks

I can send emails with Mail but can no longer receive them. Yet I haven't altered anything. How do I solve this problem. Thanks

Who is your email provider? Have you set up your account manually or was it set up automatically?

Can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type.

Can someone help. I use Photoshop Elements 13. I can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type. It started this a couple of weeks ago and I had a friend come fix it just 2 days ago. It took him several hours and I lost all tags I had on over 10,000 pictures. Now it has done it again. I'm so upset. I lost a lot of stuff. I don't want to keep bothering him with this. Please Help.

How did you import the files to your computer?
What model number camera?

TS1881 Since my last update with itunes I can no longer sync my pictures on my phone to my computer Can someone help?

Since my last update with itunes June 17, I can no longer sync my pictures on my phone to my computer Can someone help?

Do other irems sync to the iPod?
If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does the iPod in in My Computer?
If yes canyo see the photoe in the DCIM folder in My Computer>iPod>DCIM?
Other uses have reported the same problem

Can no longer save edited images in version set with PS 10.

I've been using PS 10 for many months and have been able to save my edited raw images as jpgs in version sets. I can no longer do this. The edited images save on the hard drive but not in the PS organizer...thank you for any help you can offer....

Ok, you need to know what you want to do with your image. For example if it's for the web the best way to save to jpg is.. File-Save for Web, then you will see a Box with four pages,, you can choose: Original which is going to be your original image,... Optimized which is a Lower quality version. 2-Up and 4-Up.
when you click on 4-Up Tab you see your original image in the top left, Also you have your image in 3 different windows with different file size and speed. You can click on each window and inside the Preset in Top right choose JPEG. and you can change the quality from Low to High or Drag the Quality Slider for different quality.
NOTE: when you do File-Save For Web,, you are going to have a flatten Image.. you will loose your Layers.
It is always better if you shoot your images In higher Res, such as 240, or 300 dpi, and later Down-sample the image to a lower quality for the web. If you have the original image at Higher Res, First you should Go to Image Image-size For Example Height 1200 Pixel. If you go ahead and save the file for the web then you don't need to change the Resolution. don't forget to Sharpen your image when you Down-sample

SP2010: Users with Contribute rights can Add but not edit items in Calendar View

Hello,
One of our users was recently trying to update a Calendar item in the Calendar view, but was unable to do so. Here are the facts of the case:
- The members of the user's group have Contribute rights on the Calendar list, and on each of the specific Calendar items tested
- I logged in as a member of the same group and am able to Add items in the calendar view, but when I click on an item title the Ribbon options (including Edit) are not available - whether I created the item or not
- While logged in as a member of that group, I can edit calendar items using the Allitems view, using the dropdown menu and Edit Item (if I click on the item title, I get the item details without the Ribbon)
- I created a new Calendar view ("Calendar2") but the problem was the same
When logged in with admin rights, I get the Edit ribbon when I click on an item title from the Calendar view. Is there a way to do the same for non-admin users? Thanks.

Hi,
According to your post, my understanding is that you were able to add items into a Calendar List, but you couldn’t edit some items of the Calendar List in Calendar View as a member of your group with Contribute rights. And if you edit the Calendar List’s
items in the “All Events” view or log in with admin rights, you can edit these items.
Therefore, I wonder if you use the “Calendar Overlays” to display some items of other Calendar Lists in the current Calendar List as John suggested.
And if you don’t have permissions to edit items of other Calendar Lists, you can’t edit those items of other Calendar Lists in the current Calendar List in Calendar View.
So, I recommend that you should check if using the “Calendar Overlays” to display some items of other Calendar Lists in the current Calendar List at first.
If yes, you need to check if you have permissions to edit items of other Calendar Lists.
For test, I suggest that you can create a new Calendar List and test to see how it works.
Best Regards,
Thanks
Victoria Xia
TechNet Community Support

Since upgrading to iOS 5 I can no longer add/edit email accounts

Hello All,
I am completly stumped here, Since Upgrading to iOS 5 on my ipad 2 I can no longer access the "Mail, Contacts, Calendars" tab in settings, meaning I can't add my other mail accounts or change settings, and I'm needing to sort this now.
Basically Going into Settings > Mail, Contacts, Calendars results in crash to home, I've rebooted, hard reset and returned to factory settings, non of it seems to remedy it, does anyone know of this bug? or does anyone know a work around etc?, I've had a look around altho there are many Mail issues non seem to directly relate to my issue.
Kind Regards
Fish.

I recommend taking it into the store. Sounds to me like you have downloaded an app that has allowed itself to become the "primary" when sending and recieving images.... Apple is seriously dropping the ball!! Just the other day, I downloaded an app called v-downloader... Its an app that allows you to download videos through a 3rd party browser. Well what it did, was automatically place restrictions on my phone... I couldnt send pics, and it removed access to safari, facetime, messages, etc... so maybe try removing any recent app purchases. Also, I would reccomend that you restore your phone. it will redo the update off your computer and come through with less glitches
But I agree, iOS6 has been nothing but problems... I plan on removing the update when I get home

I have recently got an iPad 2, I can no longer view/edit my Sony .ARW files in iPhoto, why?

I suspect that the problem is associated with iPad 2 and my sychronisation of iPhoto events to that device.
I can no longer a single photo such that I can edit it, what is going wrong here?
Actually I have closed down iPhoto and reopened, strange, I can now access and edit the photos!
Ther is a problem but I am damned if I know what is causing it. Nowt in console as far as I can see.

Actually I have closed down iPhoto and reopened, strange, I can now access and edit the photos!
Looks like you no longer have a problem.
OT

Since I have synced my contacts with Hotmail, I can no longer use relationships. How can I get this back without having to set up another email account?

I am currently using Hotmail with syncing enabled for mail and contacts. However, I cannot find or add the fields for family members or any relationship other than manager and assistant. I cannot add the fields manually, nor can I get Siri to assign the proper relationship to the right person (everyone defaults to manager or assistant).
I'd really prefer not to have to use a different email address just to be able to use the phone; however, up until I synced the accounts I was able to edit relationships. Can anyone help me out?

This is a limit with an Exchange account.

IPhoto worked great; with Photo I can no longer import pictures from my camera. Why?

I never had a single problem importing photos using a USB connection between camera and iMac. Since the new Photos was automatically installed with the latest OS Yosemite update, I no longer can import photos...the screen automatically opens, it shows all the photos on my camera, it allows me to choose which photo(s) I want to import and then I click "Import" and I get a nasty message that my photos to be imported are NOT in the correct format. Well, what the heck format are they supposed to be in? I see nowhere on my camera where I can change a format...
HELP!!!! I need to import photos of my granddaughter's First Communion for my entire family and the photos are stuck on my camera!!

Backup cycle - running you normally computer backup - you do have a regular backup going don't you?
Image Capture is an application in your Applications folder exactly as I stated
Try Image capture (in your applications folder) or a card Reader - once the photos are safely on your mac and at least one successful backup cycle has run use the camera's format command to reformat the card
In order to import as before you have to solve the problem that you have
In irder to solve the problem you have to read and follow directiopns
Simply posting crazy comments and not fooling directions will not resolve your problem
LN

With 2.2 can no longer delete older Bluetooth pairings

Prior to 2.2 update if you clicked on a B/T pairing icon, one option was delete. That's no longer the case.
I had the battery problems others have complained of and completely discharging then charging solved that.
I had the Bluetooth inability to connect a second time issue with the update and it looks as though it took a hard reset to fix that. Unfortunately when I scanned to re-pair with my car Bluetooth, some other device must have been within range as it's now showing on the object list. I cannot find a way to remove it even though I cannot connect or edit it.
Of course the other unfortunate thing is that the hard resert wiped everything off my phone and the backup and restore did not apparently do anything. I'm looking for thoughts on this too.

What troubleshooting steps have you tried to fix it?. The articles below can provide some step you can try.
iOS: Troubleshooting Bluetooth connections
iOS: Third-party Bluetooth accessories

With Lion I can no longer open Appleworks.

Are those documents lost. Is there anything I can do?

Search this forum for "AppleWorks". The issue with possible workarounds has been covered several times.
Regards.

Statechart​s built with debug disabled can no longer be edited?

Similar Messages

Maybe you are looking for

Statecharts built with debug disabled can no longer be edited?