Static in speakers when searching Internet

When searching on the web my iPad has a static feedback through the speakers. Which eventually causes sound loss when playing back music.

Hello sclc,
Welcome to the HP Support Forums! I understand when you are using Skype on your HP Envy Touchsmart IS-j052nr running Windows 8.1 you are hearing static, whether using headphones or the speakers. Now are you only hearing the static noises when using Skype, or whenever you are using headphones or require sound from the speakers?
After some research on the Skype Support Forums, I have seen a few recommendations which I would like you to try to see if that reduces/removes that annoying static sound. Please follow the steps listed below:
1. Sign into Skype
2. Go to Tooks > Options > General > Audio settings
3. Uncheck Automatically adjust under the Microphone and Speakers sections
4. Set volume to your preference
5. Save and restart Skype
If you are still experiencing the static noise, I would like you to continue here: Skype Audio Problems Trouble Shooting
Please reply back with the requested information, if the static noises are still there and it is only when you are using Skype, I recommend going to the Skype Support Page as they would be able to better assist you.
I will watch for your reply.
source: www.skype.com/en
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Static on speakers when using wifi

    I've got a Mac Mini with some Altec Lansing speakers.  The Speakers are connected to the Mini mini-jack out (headphone).  The system uses Airport to get to the internet.
    Anytime there is any network (WiFi) connectivity the speakers produce a bunch of crackles and static.  Which, unfortunately, is constant.
    I've tried messing with the cable routing for the speaker's input cable and even tried ferrite beads on the speaker's input cable as well.  The problem persists and is super, super annoying.
    I'm ready to tear my hair out!  Any ideas?

    Jim Schroeder1 wrote:
    I'm ready to tear my hair out!  Any ideas?
    WiFi speakers never work as good as the manufacture says, return them and get a good 50 to $100 wired 2.1 speakers system from Logitech or Creative.
    Logitech - Home PC Speakers
    2.1 Systems | Creative Labs Online Store

  • My ipad locked up when searching internet

    my ipad locked up when surfing internet

    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • The following error occured when searching for on-premises exchange server

    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Cara
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • IE opening multiple windows when searching google only.

    We have a problem where IE opens multiple windows when searching in Google. As a result of this we are receiving Google sorry page informing us that Google is receiving automated search requests from our public IP. Is there any quick fix to this problem
    apart from restoring and reset setting  in IE.
    Is anybody else facing this issue.?
    REgards
    Nahas

    Hi Nahas,
    Thank you for your update.
    Based on the current situation, you may remove any Google domains in your trusted sites for a test.
    Tools>Internet Options>Security tab, click "Reset all zones to default"
    Trusted sites icon, 'Sites' button. Remove any Google domains in your trusted sites list.
    For more information, you may refer to:
    Understanding Zone Elevation
    http://blogs.msdn.com/b/ieinternals/archive/2012/09/24/zone-elevation-security-warning-websites-in-less-privileged-zone-can-navigate-csrf-xss-protection.aspx
    Also, you may try to contact Google to confirm this.
    http://support.google.com/?hl=en
    If you wants to report a bug to Microsoft. I would like to share the link below with you.
    https://connect.microsoft.com/
    Thanks for your understanding.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support
    Spot on Blair. Thanks for the fix!
    Worked for me:
    Tools>Internet Options>Security tab, click "Reset all zones to default"

  • Fail when config "Internet Directory Configuration Assistant"

    I install oracle9ias( Infrastructure ) in AIX4.3.3 .
    It failed when config "Internet Directory Configuration Assistant"
    error message:
    No output aviaible for this tool

    the solution is
    1- I removed the Network cable
    2- I formatted the server
    3- I Installed the Application Server
    4- I Connected the server with network and I gave a static IP to the server
    Best of Luck
    Edited by: user13011851 on Jan 11, 2011 2:40 AM

  • Siri wont call people or search internet (im from UK), please help

    Basically i got my new iphone at the weekend, all was working well, siri included. now when i say for example call hayley, it says: "calling hayley mobile....." and just stays there doing nothing, same as if i say search internet
    All other functions seem to work meaning of life etc. I have done everything in the siri troubleshoot section, correct region/language set, linked it to me on contacts etc
    any ideas?
    Cheers

    If you have sireet installed remove it from cydia

  • Search: Internet and my Content on 6220 - Internet...

    Hi
    Nokia 6220 and the Search Internet and my Content option on the StandBy screen (also under Menu | Internet | Search)
    On my phone this happily goes off to Google and brings a search result page to screen. However, when you click on a link to see the page linked it just briefly flashes and does not show anything - the results page is still there.
    Comparing my phone with someon elses 6220 I believe it ought to Open the web browser - but this phone of mine does not. It is only 2-3 weeks old so hopefully not broken as such yet.
    Network for what it is worth 3UK, and yes I can use the web browser to do the same task and it connects fine.
    Anyone met and know a fix of this?
    Thanks
    6220 on 3uk

    You can remove them by switching active standby off but this also removes the row of shortcut icons.
    But with active standby off you can assign shortcuts to the navi key. For example press left for a new message, down for contacts etc.

  • TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

    I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

  • Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.    I prefer to view in All contacts on a double page spread with details on the right page.  Searching doesn't seem to work correctly i

    Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. 
    I prefer to view in All contacts on a double page spread with details on the right page.  Searching doesn't seem to work correctly in this view.
    It's always the second search that is problematic.
    I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
    I've tried to use the x to clear the previous entry and then type the next search, same problem.  The only way seems to be to move from "All Contacts" to "Groups".  Then the searched name appears and I can return to All Contacts to see full details.
    Surely three key press' are not the way it's supposed to work?
    FYI
    Processor  2.7 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 512 MB
    Software  Mac OS X Lion 10.7.3 (11D50d)
    Address book Version 6.1 (1083)
    MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

    AddressBook experts are here:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

  • When searching the calendar in list view, appointments erlier than a few years could not be found after search. en appointment from 1974 could not be found although it appears in the list.

    When searching the calendar in list view, en appointmet erlier than a few years could not be find although the appointmet is listed in the List wiew ???,
    An appointment from 1974 could not be found, in SEARCH MODE, although it appears in the calendar.

    Pardon me for a moment while I (politely) rant in your general direction...
    This type of response is not just unhelpful—it is the antithesis of helpful.
    This is a support forum. Its purpose is helping to resolve people's problems. Sometimes those problems are going to require long explanations or lots of information. That either comes out in the original post or over the course of several back-and-forth replies; the former produces long posts but takes less time overall than the latter.
    If you don't have the patience to read through a long post, then just move on. Posting a "too long, didn't read" comment adds nothing beneficial to anyone. All it does is reveal that the person who made that comment thinks it's important to tell everyone that their attention span is too short for anything longer than a tweet.
    Yes, my post was long. Had you read it, you might have understood why it's so long. I'm trying to provide information that people searching these forums about this problem might find helpful. I did this because when I searched for info on this problem, I found lots of people with a similar problem, but no answers that went beyond "restore from backup". Since that advice wasn't the solution for me, I decided that more information might prompt someone with more knowledge and access than I have to investigate. Since you couldn't be bothered to read it, you clearly aren't the kind of person whose attention I was hoping to catch.
    Certainly I could have made the post shorter, but I think putting it into a narrative like this makes it easier to follow and provides a context that a terse recitation of bare facts does not. If you disagree, that's your prerogative, but please don't waste everyone else's time by posting a comment just to say that you didn't read it.
    I find it appalling that someone who's able to reach Level 6 on these support forums would post a "tldr" comment. That does not reflect positively on you or these forums.
    End of rant.

  • My iPod Touch will not play through external speakers when it is docked.  It only plays through it's internal speaker.  All the other functions on the iPod can be controlled by the external speakers (volume,track, etc).  How do I fix this?

    My iPod Touch will not play through external speakers when it is docked.  It only plays through it's internal speaker.  All the other functions on the iPod can be controlled by the external speakers (volume,track, etc).  How do I fix this?

    I would try in oreder:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod via iTunes.  First from backup and if problem persists, restore to factory defaults/new iPod.

  • Computer tend to freeze when accessing internet with D-Link dir-655 router

    I recently bought a D-Link dir-655 router and since then my computer tend to freeze up completely when accessing internet. This also happens when certain programs access internet. Otherwise I am usually using Internet Explorer or Opera.
    I've found that there are many who experience problems with D-Link router, that they may have problems with certain network card. Anyone who can say if this is a known issues and if it there is a solution or if it is better to buy another router?
    Model #: HPE-140sc
    Product #: WC779AA-UUW
    Software-version#: A1PNv6PrA2 
    PCBRAND: Pavilion

    Hi, Ernst:
    Would you consider backing up your files and doing a system recovery?
    Maybe the OS has some corrupt registry files or something.
    If you recover and then it still does that, your only choice looking at the motherboard is a PCIe gigabit ethernet adapter which would be relatively easy to install, or you could even get a USB ethernet adapter and not even have to open the case.
    See if there is a setting to disable the onboard NIC if you have to add a network card.
    I would rule out all software problems before buying hardware.
    If you want to try some other malware program, I recommend the free Kapersky rescue disk. You burn the file to a CD and boot from it.  It scans the drive and deletes any malware or virus files it finds without the PC being in windows. A lot of times viruses and malware can't be removed when windows is running.
    Link to the download and instuctions for use is below. I like to use the graphic interface rather than the text interface.
    http://support.kaspersky.com/faq/?qid=208282173
    Paul

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • My speakers when i play music go loud then quiet and i dont know why? what is wrong?

    my speakers when i play music go loud then quiet and i dont know why? what is wrong?

    Same with me nothing has changed. However what reduces it for me is if you change your battery settings to high performance. But it still does it, you will just find it will do it less.

Maybe you are looking for